Lanscape report from Report Builder6i from win

Hi
I have a problem printing landscape report from report6i. it got cut off at the right side. I already set the report width to 11" and height to 8.5" and orientation to LANDSCAPE. I also set the system parameter ORIENTATION to LANDSCAPE. in the page setup (under report file menu) I could see the right margin is set to 2.68". I change it to 0.5, then print the report. the report came out with right side cut off. and the page setting is set back to 2.68" automatically(by windows ??). I have no idea why. the same report runs and prints perfectly from UNIX command line.
I tried different printers.
Can anybody help. thanks a lot
Hedy

please let me know the solution. i have the same problem.

Similar Messages

  • Can I use Oracle Report Server to print from APEX? How?

    Hello, we have Oracle Application server, Oracle Report server and now we just installed APEX and doing a pilot project. Since we don't have BI Publisher, how can we use our Oracle Report server to print from apex report? Can it be done and if yes where can I get some detail info that I can share with our DBA?
    I have in past asked questions about the printing issues but I have been refered to http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html#01 section 5 which talks about another installation.
    Thanks so very much for any info.
    -iahmadi

    You can use FOP, but the formatting of the xsl (Xml Style Sheets) takes a little work. If you have the Oracle Reports server up and access to the development product, why not go that route?
    You want the filtering and sorting and searching, yes, but then you also want to print them out.. Then you would probably be best looking at replacing the Oracle Reports setup with BI Publisher. You can convert Most your reports over to bi publisher layouts easily.. (I have heard of some reports that do require recreating in Bi Publisher from Oracle Reports..)
    Then you can have your Apex Reports and call Bi Publisher from APEX and everyone wins..
    Is your Oracle Reports stuff used by non-APEX applications, that could be modified to use Bi Publisher?
    Thank you,
    Tony Miller
    Webster, TX

  • Discoverer Report: How to find Business Area name from Report Name.

    Hi
    I opened a report in Disco Desktop 4 -> Resonsibiolity --> Report Name.
    So I know Report name but don’t know which Business Area it belongs to.
    How to find Business Area Name from Report Name?
    Cheers
    Vijay

    Hi,
    There is no relationship between reports and business areas. Each report can be built from many folders. Each folder can be in many business areas.
    However you can try the following SQL which may give you the result you want for an v5 EUL. You will have to modify for Discoverer 4 EUL:
    select distinct doc_name, obj.obj_name folder_name, bas.ba_name
    from eul_us.eul5_documents doc
    , eul_us.eul5_elem_xrefs xref
    , eul_us.eul5_expressions exp
    , eul_us.eul5_objs obj
    , eul_us.eul5_ba_obj_links bol
    , eul_us.eul5_bas bas
    where xref.ex_from_id = doc.doc_id
    and doc.doc_name = &your_report
    and xref.ex_to_id = exp.exp_id
    and obj.obj_id = exp.it_obj_id
    and bol.bol_obj_id = obj.obj_id
    and bas.ba_id = bol.bol_ba_id
    Rod West

  • Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

    I just noticed today that any Graph or PDF report I try to view I get the
    following error - Error from reports from ZAM - File does not begin with
    '%PDF-'. I tried to just save the file and then open it, but get the same
    error. I can open other pdf files I have downloaded from other sites ok.
    Anyone have any idea? I haven't done anything to that server that I am
    aware of in quite a while.
    Thanks
    Bill

    I took a closer look at the files it downloaded, opened them with notepad,
    haer is what it says:
    XSL Transform or subsequent processing failedThe document has no pages.
    "Bill" <[email protected]> wrote in message
    news:2bBtk.2164$[email protected]..
    >I just noticed today that any Graph or PDF report I try to view I get the
    >following error - Error from reports from ZAM - File does not begin with
    >'%PDF-'. I tried to just save the file and then open it, but get the same
    >error. I can open other pdf files I have downloaded from other sites ok.
    >Anyone have any idea? I haven't done anything to that server that I am
    >aware of in quite a while.
    >
    > Thanks
    >
    > Bill
    >

  • Delete Reports from Reporting Server

    Hi,
    We have created and scheduled some test reports via Idera performance tool but we are unable to delete the reports. These are not custom reports and reports created with Schedule Email option in Idera. Unfortunately, I dera does not have any option to delete
    these reports and support is asking me if I tried this by deleting from SQL Server Reporting Services.
    I looked at the Reporting services but can't find any place to delete these reports. This link does not help me because I don't have these (Or Report Manager)----> Configuration Manager console, navigate to
    System Center Configuration Manager / Site Database /
    Computer Management / Reporting / Reporting Services
    https://technet.microsoft.com/en-us/library/cc678417.aspx
    All I have is "Reporting Services Configuration Manager" under "Configuration Tools". How can I delete these reports from SQL Server Reporting services ?. Can I delete them from some tables in Reports databases ?. If so, what are the
    tables ?. I delete the jobs from SQL Server but the jobs are automatically created the next day emailing the reports again......Thanks for any help.
    SQL Server 2012 SP2 - Windows 2008 R2.

    Hi DCarlos,
    Glad to hear your issue have been resolved and I would appreciate you can share the information which will help others a lot!
    Thanks,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Problem with passing 2 or 3 members from filter to drillthrough report (SSRS report) in PPS

    Hi,
    I have one dashboard and one filter in PPS. Dashboard contains one main analytical chart report-- sales by Product category and the filter name is Year (contains the members values from 2005 to 2014).
    I have one more drillthrough report--- Detailed report for sales by product category (SSRS report)
    SSRS report having two parameters 1. year  (Multi selection) 2. Product category (single selection)
    Now, I have select 2006,2008 in the pps filter and analytical chart report rendered based on the filter values.
    next, on the analytical chart, I have selected on bar item (cars) out of 4 categories(Cars,Bikes,Trucks,Accessoreis) and right click -->drillthrough-->click on Detailed report for sales by product category.
    I have verified the ssrs detailed report and pps is passing only ALL member instead of passing 2006 and 2008 to the Year filter and Cars category members correctly passed to product category parameter from PPS.
    Note: If I have passed one member values (year=2006), pps is able to pass to ssrs report. But, it failed in two or more member values from filter.
    I have verified in sql profiler also. PPS passing ALL member to SSRS detailed report Year parameter.
    Please provide your suggestions. 
    Thanks,
    kishore

    sorry for the late updation.
    My First Report, Summary level is a Pivot Table.
    I tried the same report with Table option, the value is passing correctly.
    Is there a way to get rid of this situation using Pivot table.
    Thanks for your help.
    below is the original request.
    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

  • Close Reports Background Engine from reports

    Hi,
    I have a report that calls another report via SRW.run_report. Qhen the other report is called, Reports Background Engine opens and stays open, even after closing the called report.
    How to programmatically close Reports Background Engine when closing the report. I have read on the forum some procedure to close it from "Forms", but not from report.
    Thank you,
    J

    you can not close the RBE from reports as it would require a report to be executed ... i guess you get the problem.
    the only way to close the RBE is from forms.
    thanks,
    ph.

  • Report for stock transfer from plant to plant

    Hi,
      Is there any standard report for  stock transfer from plant to plant .
      If not is there any enhancements to get the above report.
    Regards,
    Ravindranath.

    Hi Ravi,
    U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
    if u want the list of stock transport orders then use tcode ME2N and the input parameter as  item category "U" and generate the report.
    hope it wud have answered ur question
    Reward if useful
    Shawn

  • How to disable report's execution requests from the browser

    Hello gurus,
    We are implementing several security measures in our application, some of them are related to reports execution/visualization, we need to avoid users accessing reports that they don't have privilege to see. The reports were execute by Forms via RUN_REPORT_OBJECT, destination type CACHE and destination format PDF, then we displayed the output using the jobId provided to Forms by the Reports Server. Because these jobIds are sequential numbers any person was able to change the jobId in the URL and get the output of another report. This violated the Confidentiality of information.
    Now we generate all reports output to file, the file name is a random value, to avoid guessing. The problem is that even though the official way to execute a report is via the application, the report servlet is accepting request as URLs, and this violates the access controls we have implemented in the application.
    Is there a way to stop the reports servlet without affecting the valid requests (from RUN_REPORT_OBJET in Forms) or is there another possible way to disable URL requests?
    TIA
    Victor.

    If you are using Portal and SSO, you can assign privileges on Reports and Reports Servers to groups and/or users. For more info, see Chapter 10 of the "Publishing Reports to the Web" documentation: http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_sec_arch.htm#i1006221

  • Connecting to db2 from report builder via odbc

    Hi!
    Some manuals said, it is possible to connect to DB2 from Oracle SQL*Plus (we have version 8.0.6.0.0)
    and from Oracle Report Builder.(6.0.8.11.3)
    User must install OCA (Oracle Open Client Adapter for ODBC (6.0.5.29.0)) and make ODBC entry.
    I did it.
    run with: plus80 db2user/db2pass@odbc:db2test
    SQL*Plus made the connection, but with errors:
    SQL*Plus: Release 8.0.6.0.0 - Production on Fri Oct 17 16:12:56 2003
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    Error accessing PRODUCT_USER_PROFILE
    Warning: Product user profile information not loaded!
    You may need to run PUPBLD.SQL as SYSTEM
    Server not available or version too low for this feature
    ORA-00022: invalid session id; access denied
    Connected to:
    Oracle Open Client Adapter for ODBC 6.0.5.29.0
    DB2/NT 08.01.0000
    SQL>
    The error refers PUPBLD.SQL, but I think it is Oracle specific, don't help.
    Worse, that it can't connect from Report Builder, it just throws error.
    If I set OCA_DEBUG=TRUE in registry, I have bonus messages:
    oca-30053 unsupported network call (oracle code: 3115)
    oca-30002 ubofssw function not supported (1010)
    I tried to connect to MsAcces too, but I got same errors.
    Have you any idea, how can I solve this?
    Thanks

    resolved
    I just add the master entry in the c:\Report\NET80\ADMIN\tnsnames.ora, and it works.
    but I can't connect with the system or sys accounts, it work just with scott/tiger.

  • "edit" link from report to form does not show values

    I created a report and an attached form on two different pages. The report is a query combining two tables with outer joins. When I click on the "edit" button on the report, I get forwarded to the form page.
    My problem: When I get forwarded to the forms page, I get an empty form, and not the data from the column as expected. The "edit" button behaves more like the "create" button. Anybody an idea what I could change to be able to edit the column data?
    Thank you.

    I've met the similar problem with previous releases (1.5.0 and 1.5.1) without any objective reason.
    As I suggests, sometimes HTMLDB lost current session state. When this occurs, ALL links from reports to it's forms does not transit primary keys. I've just completed application development and I've met this behaviour every months.
    As a workaround I found folowwjing process:
    Come into administration tab, selet "Report with option to purge current session state". When I purge current session state and re-login to application, all report-form links will start to work.
    I don't know, what is the issue, but I met it so soon on my local HTMLDB environment.

  • Calling report with no parameters from a form should report be a JSP file?

    Hi,
    I'm completely new to the Oracle environment and am having a few beginner problems all I want to find out is how to call a report from a form. I know this question has been asked before but I can't work it out from the answers because people seem to keep talking about rdf files:
    I am trying to call the report with the following code:
    Declare
         report_id REPORT_OBJECT;
         v_rep varchar2(100);
         rep_status varchar2(20);
    Begin
         report_id:= FIND_REPORT_OBJECT('EmployeeRep');
         v_rep := RUN_REPORT_OBJECT(report_id);
    END;
    My report is called 'EmployeeRep' but it saves it as a JSP file and there is no option to save as an rdf as is mentioned in other posts. I can understand the environments confusion because there is no directory information with the find_report_object command. Does the report have to be stored in a certain directory.
    All I have done with the report is created it from the emp table of the sample Scott database. Any help is appreciated and nothing is too obvious as I say I'm completely new to this.
    Thanks
    Dan

    Try to pinpoint what is going wrong:
    1. Run the report stand alone (from Reports Builder). If that doesn't work, then it won't work calling it from Forms either.
    2. Check if anything has run at all, or if there are report error messages with:
    http://localhost:port/reports/rwservlet/showjobs?
    For a standalone Report Server use:
    http://localhost:port/reports/rwservlet/showjobs?server=rep_server_name
    3. If it does work, call it from Forms. Is the report output file created (e.g. in the cache directory if destype=cache)? In your code you have run_report_object, but you won't see any output on your screen. To see the output add web.show_document(...) to your report. There are many examples in this forum if you search for run_report_object.

  • Report missing some data from dataset

    Hi
    I populate my report using a dataset and most of the time the report generation is successful.
    but after a while (3-5 reports) I start getting missing data in the report. Either the png blobs do not get printed or some other string fields. Usually the same strings are missing.
    If I continue generating reports after that I get "report could not be submitted for background processing" error or since I use some fields for formatting I get errors corresponding to those formulas where I try to use the missing fields.
    I have checked the dataset before SetDataSource and it is complete, images and all.
    Is there some way to restart the embedded crystal reports thread/process programmatically from c#? if the problem is because of memory fragmentation, this might solve the problem.
    I use crystal reports basic 2008 for visual studio 2008.
    Kind regards
    //Gunnar

    In a memory intensive environment like this, it is possible that we will run into these issues. The thing is - as I understand these tings, Microsoft does not let a 3rd party just go out and use the dataset. E.g.; the Crystal Reports engine is forced to make a copy of the dataset and use that. So, now you've chewed up more memory again. It would be interesting to do four things;
    1) monitor the memory and see if there is a particular value at which it is more likely to get the issue
    2) take out the report and dataset into another sample app that is not using these x-rays and see if you duplicate the issue there
    3) see if CR 2008 (12.x) handles the memory better. As these versions go, there are always improvements. I am not aware of a particular "thing" done to the report engine or database engine in this respect, but it may be worth trying. An eval of CR 2008 can be downloaded from here:
    http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    Once you have installed the above, check the version (Help | About). If the version is not 12.3.0.601, download SP 3 from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
    4) rather than using datasets, would it be possible to write the data into some database temp table and consume the data from there?
    Ludek

  • Report not displaying data from one of the infoproviders

    Hi Experts,
    Issue: Report not displaying data from one of the infoproviders
    I have a report 'ReportA' which has multiprovider MP1 as the source.
    MP1 has two Infocubes IC1, IC2 in its design.
    Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
    Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
    Please reply.
    Regards,
    Suraj S Nair

    Hi All,
    When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
    I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
    Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
    I checked the Characteristics, all of them are assigned corectly.
    Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
    Regards,
    Suraj S Nair

  • Passing a value from Report A to B when B is in a different Subject Area

    I had posted a question previously on how to pass the Dept # from Report A to B when B i in a different Subject Area. The question was:
    Report A is a table on the Dashboard that shows Actual vs Budget results by Department. I want the user to click on the Department and be navigated to report B that shows the detail transactions that make up the Actual results. Report A and B are from different underlying subject areas. Thus when I navigate to report B, I see ALL departments, and not the one I clicked on in Report A to bring up Report B. How can I limit the results in Report B to be just the respective cell I clicked on in Report A?
    I got great advice from Nico on how to use the GO URL, but I can only get that to work if the 2 reports in question are from the same data model. In my case they are NOT.
    The GO URL seems to be working, as it does open up Report B when I click on the Department field in Report A, but it does not pass the Department number to Report B, even though reprot B has that field "as prompted".
    Can anyone definitively indicate whether what I'm trying to do is not possible in BI EE?

    Read this from Venkat... I think this will be helpful in understanding prompts, both the column prompts (Answers) type and the dashboard prompts. Very useful, I think.
    http://oraclebizint.wordpress.com/2008/04/30/oracle-bi-ee-101332-understanding-dashboard-prompts-passing-prompts-to-multiple-subject-areas-aliases/

Maybe you are looking for