LAP 1131 Rebooting Every 5 Hrs
Hi All,
We have 5508 WLC with 7.4.100.60 Ios. and we have multiple Ap's in our network (3600,1131,1242) and integrated with 5508.
We found on eissue recently i.e. all 1131 access points are rebooting every 5 to 6 hrs.
Let me know waht is the issue and solution.
Regards,
Satish.
For 1142 & 1040 series there was a bug (CSCud97983) in 7.4.100.0 code, but it was fixed in 7.4.100.60. If you having specific issue to 1131 after WLC code upgrade, it could be a bug.
As Scott suggested open a TAC case & Cisco may give you an engineering release which could fix your issue (if you do not want to downgrade). We were using 7.4.100.60 & had few critical bugs.. so now we are running on 7.4.100.107 given by TAC.
You can find certain bugs impacted us with this 7.4.x code from here.
http://mrncciew.com/2013/02/10/day-0-with-wlc-7-4-code/
HTH
Rasika
Similar Messages
-
Cisco AIR-LAP 1131 reboot in loop
Hi Everyone
I recently had to deploy about 4 cisco 1131 AP's to one of our branch location. When configuring them on the controller, i needed to put them in HREAP mode. As soon as i do that and the AP needs to reboot, it will continue to reboot in a loop and indicate the following:
Unexpected exception to CPUvector 1100, PC = 5A9048
-Traceback= 0x5A9048 0x48A8A0 0x4361FC 0x42E078 0x44880C 0x42A280 0x42AA68 0x18A990
Exception (1100)! Data TLB Miss
SRR0 = 0x005A9048 SRR1 = 0x00029230 SRR2 = 0x0028007C SRR3 = 0x00021230
ESR = 0x00000000 DEAR = 0x025BFB94 TSR = 0x84000000 DBSR = 0x00000000
CPU Register Context:
Vector = 0x00001100 PC = 0x005A9048 MSR = 0x00029230 CR = 0x53000035
LR = 0x0048A8A0 CTR = 0x00000072 XER = 0xA0000040
R0 = 0x00000072 R1 = 0x00CD9790 R2 = 0x00000000 R3 = 0x025CBFF8
R4 = 0x025BFB94 R5 = 0x00000000 R6 = 0x00000001 R7 = 0x000000C3
R8 = 0x000001C8 R9 = 0x00000000 R10 = 0x025CBFF8 R11 = 0x00000000
R12 = 0x00CDB580 R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000
R16 = 0x0184C8AA R17 = 0x0184C71B R18 = 0x00CDB760 R19 = 0x00000007
R20 = 0x00000001 R21 = 0x00000000 R22 = 0x00000007 R23 = 0x00000001
R24 = 0x0093BA68 R25 = 0x00000000 R26 = 0x00000001 R27 = 0x00000001
R28 = 0x00001FA8 R29 = 0x0094A200 R30 = 0x01C7FE38 R31 = 0x00003D80
Stack trace:
PC = 0x005A9048, SP = 0x00CD9790
Frame 00: SP = 0x00CD97D0 PC = 0x0048A6A8
Frame 01: SP = 0x00CDB728 PC = 0x004361FC
Frame 02: SP = 0x00CDB740 PC = 0x0042E078
Frame 03: SP = 0x00CDB758 PC = 0x0044880C
Frame 04: SP = 0x00CDB798 PC = 0x0042A280
Frame 05: SP = 0x00CDB7C0 PC = 0x0042AA68
Frame 06: SP = 0x00000000 PC = 0x0018A990
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 10-Aug-07 20:44 by kehsiao
St-John-AP1 uptime is 1 minute,
cisco AIR-LAP1131G-A-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.
Processor board ID FTX1632N00D
PowerPCElvis CPU at 262Mhz, revision number 0x0950
And this is all it does, and keep loading the image. I already know the recovery procedure to reset it, but i wanted to know how i can put these AP in HREAP without having these issues. In the setup we need, we cannot have those AP be in local mode.
Thanks for any help and consideration .
RegardsHi Scott
Thanks for replying
here is the full output between loops :
Press RETURN to get started!
*Mar 1 00:00:06.552: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.962: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:09.281: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 10-Aug-07 20:44 by kehsiao
*Mar 1 00:00:09.281: %SNMP-5-COLDSTART: SNMP agent on host St-John-AP1 is undergoing a cold start
*Mar 1 00:00:09.303: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:10.027: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.303: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:28.301: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.301: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:28.323: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
*Mar 1 00:00:29.049: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:29.087: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.442: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:37.564: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.1.3.48, mask 255.255.0.0, hostname St-John-AP1
Translating "CISCO-LWAPP-CONTROLLER.aimfire.net"...domain server (10.1.10.100) [OK]
*Mar 1 00:00:50.821: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:50.822: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 15:49:20.913: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 15:49:21.306: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Mar 1 15:49:21.351: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
*Mar 1 15:52:11.000: %LWAPP-5-CHANGED: LWAPP changed sta
15:52:12 UTC Fri Mar 1 2013: Unexpected exception to CPUvector 1100, PC = 0x5A9048 , LR = 0x48A8A0
-Traceback= 0x5A9048 0x48A8A0 0x4361FC 0x42E078 0x44880C 0x42A280 0x42AA68 0x18A990
CPU Register Context:
MSR = 0x00029230 CR = 0x53000035 CTR = 0x00000072 XER = 0xA0000040
R0 = 0x00000072 R1 = 0x00D1EC18 R2 = 0x00000000 R3 = 0x025CBFF8
R4 = 0x025BFB94 R5 = 0x00000000 R6 = 0x00000001 R7 = 0x000000CA
R8 = 0x000001C8 R9 = 0x00000000 R10 = 0x025CBFF8 R11 = 0x00000000
R12 = 0x00D20A08 R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000
R16 = 0x01851A6A R17 = 0x018518DB R18 = 0x00D20BE8 R19 = 0x00000007
R20 = 0x00000001 R21 = 0x00000000 R22 = 0x00000007 R23 = 0x00000001
R24 = 0x0093BA68 R25 = 0x00000000 R26 = 0x00000001 R27 = 0x00000001
R28 = 0x00001FA8 R29 = 0x0094A200 R30 = 0x01C7FE38 R31 = 0x00003D80
Writing crashinfo to flash:/crashinfo_20130301-155213
=== Flushing messages (15:52:20 UTC Fri Mar 1 2013) ===
Buffered messages:
*Mar 1 00:00:06.552: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.962: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:09.281: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 10-Aug-07 20:44 by kehsiao
*Mar 1 00:00:09.281: %SNMP-5-COLDSTART: SNMP agent on host St-John-AP1 is undergoing a cold start
*Mar 1 00:00:09.303: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:10.027: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:10.303: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:28.301: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.301: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:28.323: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
*Mar 1 00:00:29.049: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:29.087: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:29.442: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:37.564: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.1.3.48, mask 255.255.0.0, hostname St-John-AP1
*Mar 1 00:00:50.821: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:50.822: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 1 15:49:20.913: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 15:49:21.306: %LWAPP-5-CHANGED: LWAPP changed state to CFG
*Mar 1 15:49:21.351: %LWAPP-5-CHANGED: LWAPP changed state to DOWN
*Mar 1 15:52:11.000: %LWAPP-5-CHANGED: LWAPP changed state to UP
*Mar 1 15:52:11.055: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
Queued messages:
*Mar 1 15:52:23.534: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Mar 1 15:52:11.414: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
Nested exception_rom_monitor call (2 times)
Unexpected exception to CPUvector 1100, PC = 5A9048
-Traceback= 0x5A9048 0x48A8A0 0x4361FC 0x42E078 0x44880C 0x42A280 0x42AA68 0x18A990
Exception (1100)! Data TLB Miss
SRR0 = 0x005A9048 SRR1 = 0x00029230 SRR2 = 0x0028007C SRR3 = 0x00021230
ESR = 0x00000000 DEAR = 0x025BFB94 TSR = 0x84000000 DBSR = 0x00000000
CPU Register Context:
Vector = 0x00001100 PC = 0x005A9048 MSR = 0x00029230 CR = 0x53000035
LR = 0x0048A8A0 CTR = 0x00000072 XER = 0xA0000040
R0 = 0x00000072 R1 = 0x00D1EC18 R2 = 0x00000000 R3 = 0x025CBFF8
R4 = 0x025BFB94 R5 = 0x00000000 R6 = 0x00000001 R7 = 0x000000CA
R8 = 0x000001C8 R9 = 0x00000000 R10 = 0x025CBFF8 R11 = 0x00000000
R12 = 0x00D20A08 R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000
R16 = 0x01851A6A R17 = 0x018518DB R18 = 0x00D20BE8 R19 = 0x00000007
R20 = 0x00000001 R21 = 0x00000000 R22 = 0x00000007 R23 = 0x00000001
R24 = 0x0093BA68 R25 = 0x00000000 R26 = 0x00000001 R27 = 0x00000001
R28 = 0x00001FA8 R29 = 0x0094A200 R30 = 0x01C7FE38 R31 = 0x00003D80
Stack trace:
PC = 0x005A9048, SP = 0x00D1EC18
Frame 00: SP = 0x00D1EC58 PC = 0x0048A6A8
Frame 01: SP = 0x00D20BB0 PC = 0x004361FC
Frame 02: SP = 0x00D20BC8 PC = 0x0042E078
Frame 03: SP = 0x00D20BE0 PC = 0x0044880C
Frame 04: SP = 0x00D20C20 PC = 0x0042A280
Frame 05: SP = 0x00D20C48 PC = 0x0042AA68
Frame 06: SP = 0x00000000 PC = 0x0018A990
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 10-Aug-07 20:44 by kehsiao
St-John-AP1 uptime is 1 minute, 7 seconds
cisco AIR-LAP1131G-A-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.
Processor board ID FTX1632N00D
PowerPCElvis CPU at 262Mhz, revision number 0x0950
flashfs[0]: 40 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 15129600
flashfs[0]: Bytes available: 869376
flashfs[0]: flashfs fsck took 41 seconds.
Base ethernet MAC Address: d8:67:d9:ba:9f:2e
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1130-k9w8-mx.124-3g.JA2/c1130-k9w8-mx.124-3g.JA2"...###############################################
File "flash:/c1130-k9w8-mx.124-3g.JA2/c1130-k9w8-mx.124-3g.JA2" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(3g)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Fri 10-Aug-07 20:44 by kehsiao
Image text-base: 0x00003000, data-base: 0x005AEE20
Initializing flashfs...
flashfs[1]: 40 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 15129600
flashfs[1]: Bytes available: 869376
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
Radio 1 A506 7100 E8000000 A0000000 80000000 3
Radio 0 0 0 0 0 0 2
cisco AIR-LAP1131G-A-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.
Processor board ID FTX1632N00D
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from unknown reload cause - reason ptr 0xF, PC 0x5A9048, address 0x0
LWAPP image version 4.1.192.35
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: D8:67:D9:BA:9F:2E
Part Number : 73-13304-02
PCA Assembly Number : 800-36409-01
PCA Revision Number : B0
PCB Serial Number : FOC16304BZJ
Top Assembly Part Number : 800-29582-03
Top Assembly Serial Number : FTX1632N00D
Top Revision Number : A0
Product/Model Number : AIR-LAP1131G-A-K9
Press RETURN to get started!
Also , the switchport is a trunk port, i can definitely try it an access port . -
SRW2024 rebooting every 50 days
HELLO WORLD
We have two SRW2024 which has a strange behavior. both of them rebooting exactly every 50 days.we face everytime a short outage of the network traffic.
Model Name SRW2024
Hardware Version 00.03.00
Boot Version 1.0.1
Firmware Version 1.2.2
Is this a known issue? In the support section I found a firmware 1.2.2b. I cant find any release notes and I'm asking myself, if this FW version would solve this automated reboot?Hello Ivor
thank your asking back.
I'll post the case number tomorrow. in the meantime I'd like to answer your questions :
Issue 1 - reboot every 50 days issue
- Based on the information that was provided it appears that you have a syslog server. Does the syslog server log every 50 days a startup syslog message (for example: %INIT-I-Startup: Cold Startup)?
>>> After I figured out the issues for the first time I configured the Switch for sending the mesages to our log server. yesterday was day 25 as I posted my last message. the Issue 2 happens and I need to wait now another 50 days.
- How is the system uptime measured (which tool, how does the tool measure it)?
>>> the system uptime is measured with cacti.net monitoring by using the SNMP read community OID .1.3.6.1.2.1.1.3.0
- Configuration of the device
>>> the switch has no special configuration. just used as a plain (unmanaged) switch within a LAN. the switch is used in a audio streaming environment. we produce corporate webradio streams for our customer. therefore the switch is used 24/7 with a average load of 20 Mbit/s output on port g1 to the Firewall >>> WAN Switch >>> ISP Backbone
- The content of the memory & flash logs
>>>> I currently won't login again, because I fear of another reboot. the switch is in productive environment and another forced cold startup will cause streaming interrupts for our customers ! I try to access with a IE6 standalone installation from Multiple IE (http://tredosoft.com/Multiple_IE) and keep you posted on that
- Is there some kind of automatic process in the network that occurs every 50 days?
>>> no automatic processes within the LAN
Issue 2 - fatal error
- Which build of IE 8 is used?
>>> the latest after updating from IE7 to IE8 (MS update function) : Version 8.0.6001.18702
- Are there any plugins in IE 8?
>>> just two plugins automaticly installed from Java are installed see below :
Name: Java(tm) Plug-In 2 SSV Helper
Publisher: (Not verified) Sun Microsystems, Inc.
Type: Browser Helper Object
Version: 6.0.130.3
File date:
Date last accessed: Montag, 17. August 2009, 22:53
Class ID: {DBC80044-A445-435B-BC74-9C25C1C588A9}
Use count: 27
Block count: 0
File: jp2ssv.dll
Folder: C:\Program Files\Java\jre6\bin
Name: JQSIEStartDetectorImpl Class
Publisher: (Not verified) Sun Microsystems, Inc.
Type: Browser Helper Object
Version: 6.0.130.3
File date:
Date last accessed: Montag, 17. August 2009, 22:53
Class ID: {E7E6F031-17CE-4C07-BC86-EABFE594F69C}
Use count: 27
Block count: 0
File: jqs_plugin.dll
Folder: C:\Program Files\Java\jre6\lib\deploy\jqs\ie
- Was there any change in IE 8 from default configuration?
>>> No
- Does it always happen when logging in, or did it happen just once?
>>> It happens just once. before sometimes I was not able to see something in the browser. the web management site stayed in blue. the same behavior as already reported here in the forum.
- Did it happen immediately when logging in, or did it happen after navigating to a certain page / between pages?
>>> I loged in and navigated to the System log site.
My boss wants to replace the both switch by HP ProCurve switches if this happens frequently. So I cant promise that we keep this switches for another 50 days. I'll open a case number anyway and keep you informed
Regards
tom -
IPad2 reboots every few minutes
My iPad2 recently began to reboot every few minutes of use. It has been reformatted, all added apps removed and the battery allowed to completely deplete then recharge, all to no avail. Any suggestions?
If you are near an Apple Store, a trip to the Genius Bar. If you are still under warranty they can replace it. If you are out of warranty, they may still be able to replace it for a fee but it will still be less than full retail cost.
-
Can't Launch "Memo" Application ... Soft Reboots Every Time I Try
Help. All of a sudden, my device no longer allows me to launch the Memo application. When I tap to launch the app my device soft reboots every time. I have a ton of critical information in my memos that I need to access every day (fortunately, all the info is backed up on my desktop - it syncs to MS Outlook). Anybody know how I can fix this? I've seen this behavior with other applications on my TX, but this is the first time I have seen it on one of the core applications. Thanks for any help.
Post relates to: Palm TXSounds like a corrupted Memo application that could be causing the reboot.
Go to www.pimlicosoftware.com and download a trial of dbfixit scan your device and see if it finds any errors. -
WRT54G reboots every 20 minutes
I recently just switched from astound to comcast and astound worked fine 100% uptime no d/cs or anything...When we switched to comcast the router reboots every 20 minutes. I called comcast and they said everything is fine on their end. I tried power cycling everything and still no luck. When i connect directly to the modem I get no d/cs. Anyone have any ideas? Thanks in advance for any possible help, and sorry for my prolly horrible grammar. =]
Message Edited by Hukepi on 08-08-2007 10:31 PMhi... connect the computer directly to the modem, go to www.linksys.com/download and download the latest firmware for the router, connect modem >> router >> pc, logon to router's setup page, open I.E. and in the address bar type 192.168.1.1 it would ask for username and password...put "admin" (default password) as a password and try reflashing/upgrading firmware on the router, after reflashing firmware on the router reset it and reconfigure it according to ISP settings and try reducing MTU to 1365 on the router...check whether it makes any difference or not and let me know the results.
-
IMac27 reboots every few days with message "Restarted after error"
My iMac27 reboots every few days with message "Restarted after error". How do I find out what it is upset about so I can repair?
Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Also, OS X- How to log a kernel panic and post a recent panic log (not a crash log.)
-
Why my mawerick reboots every time when I try to mount afp drive over VPN ipsec?
After Mawericks update there has been a bug that prevents using afp file sharing with ipsec VPN. Mawerick will reboot every time when I try to choose folder to view. VPN connection and user authentication works fine until I have to choose which folder to mount. Any other VPN action like common web browsing doesn't cause any problems. It's only afp.
When I view logs I will find this one. It indicates that there really is some low level problem in drivers.
Question is: How I can fix this?
cat /Library/Logs/DiagnosticReports/Kernel_2014-06-13-161330...panic
panic(cpu 2 caller 0xffffff800f6dc7e9): "Double fault at 0xffffff800f6db7d3, registers:\n" "CR0: 0x000000008001003b, CR2: 0xffffff80ba7a7fe8, CR3: 0x000000006e4dc056, CR4: 0x00000000001606e0\n" "RAX: 0xffffff80ba7a81f0, RBX: 0x0000000000000000, RCX: 0xffffff801e230e30, RDX: 0xffffff800f6f3280\n" "RSP: 0xffffff80ba7a7ff0, RBP: 0xffffff80ba7a81b0, RSI: 0xffffff80ba7a81c0, RDI: 0xffffff80ba7a81e0\n" "R8: 0xffffff801dec6528, R9: 0x0000000000000210, R10: 0x0000000000000230, R11: 0x0000000003000000\n" "R12: 0xffffff7f8ff2e7b2, R13: 0xffffff80ba7a81e0, R14: 0x0000000000010282, R15: 0x0000000000000007\n" "RFL: 0x0000000000010002, RIP: 0xffffff800f6db7d3, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.100.13/osfmk/i386/trap_native.c :168
Backtrace (CPU 2), Frame : Return Address
0xffffff80ba7abfb0 : 0xffffff800f6f3c56
Kernel Extensions in backtrace:
com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7f8f f2b000->0xffffff7f8ff71fff
com.apple.nke.ppp(1.9)[9AFC414D-6784-373D-87BF-0F8293D9711D]@0xffffff7f916a6000- >0xffffff7f916b1fff
com.apple.nke.l2tp(1.9)[C50D2D3E-95E0-37F7-A68B-F205342C3741]@0xffffff7f916b2000 ->0xffffff7f916b8fff
dependency: com.apple.nke.ppp(1.9)[9AFC414D-6784-373D-87BF-0F8293D9711D]@0xffffff7f916a6000
com.apple.nke.asp-tcp(8.0.1)[314D9880-07E9-3C97-BA2A-C79EA67E0C95]@0xffffff7f916 b9000->0xffffff7f916c5fffYes sure it's a full panic log. I just didn't paste all of it over here.
Stack of addresses and kernel extensions were missing. The thing is that Mawericks setup is really out of the box installation. There is nothing special in the setup.
Kernel extensions:
BSD process name corresponding to current thread: Finder
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide: 0x000000000f400000
Kernel text base: 0xffffff800f600000
System model name: MacBookAir6,2 (Mac-7DF21CB3ED6977E5)
System uptime in nanoseconds: 10820772112173
last loaded kext at 10795053792422: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f91726000, size 49152)
last unloaded kext at 362945774758: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f916a6000, size 32768)
loaded kexts:
com.avast.AvastFileShield 2.1.0
com.avast.PacketForwarder 1.4
com.apple.driver.AppleIntelMCEReporter 104
com.apple.filesystems.afpfs 11.1
com.apple.nke.asp-tcp 8.0.1
com.apple.nke.l2tp 1.9
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOBluetoothSerialManager 4.2.4f1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AGPM 100.14.15
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.6.1f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleCameraInterface 4.26.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleIntelHD5000Graphics 8.2.6
com.apple.driver.AppleIntelFramebufferAzul 8.2.6
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleTopCaseHIDEventDriver 10.21
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.driver.AirPort.Brcm4360 831.21.63
com.apple.driver.AppleUSBXHCI 677.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.security.SecureRemotePassword 1.0
com.apple.nke.ppp 1.9
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.1f2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.4f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.4f1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginFamily 5.7.0d11
com.apple.driver.AppleHDAController 2.6.1f2
com.apple.iokit.IOHDAFamily 2.6.1f2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.AppleGraphicsDeviceControl 3.5.26
com.apple.iokit.IOAcceleratorFamily2 98.20
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.CoreStorage 380
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.AppleHSSPIHIDDriver 24
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.2.7
com.apple.iokit.IO80211Family 630.35
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.AppleHSSPISupport 24
com.apple.driver.AppleIntelLpssSpiController 2.0.34
com.apple.driver.AppleIntelLpssGspi 2.0.34
com.apple.driver.AppleIntelLpssDmac 2.0.34
com.apple.iokit.IOUSBFamily 677.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0 -
WRT54GX2 reboots every 10 seconds
I have a linksys WRT54GX2 wireless router that reboots every 10 seconds. I've read that it's a firmware problem but how am I supposed to update the firmware from the interface in a matter of 10 seconds?
You can try updating the firmware using TFTP utility...BUt before you upgrade the firmware...Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...
Download the TFTP utility and save it on the dekstop.
Follow these steps to upgrade the firmware on the device : -
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
EA6500 reboots every few hours
Hi, I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.
Any idea what is wrong? Have the latest firmware. Reset multiple times.Hi,
Is there a specific time when the router reboots? This performance seems weird and there's no way for most of us - the end users to check what causes the reboot. Anyways, you can try to set static channels on both 2.4Ghz and 5 Ghz bands. For the 2.4Ghz - set it to channel 9 - 2.452 Ghz and for the 5Ghz band, set it to 153 - 5.765 Ghz.
This is based from an observation on my friend's N450 Belkin Router - got so curious of it's "self healing" feature. Based on observation, self healing will just re-initialize the router based on the specific time that had been set and it will cycle through other available wireless channel. So, to avoid re-initialization, we can try setting a static wireless channel on EA6500.
If everyone needs to believe in something, I believe I'll have another beer.. -
IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!
Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.
-
My iphone4s keeps rebooting every 3 minutes; what might be wrong
My iphone 4s keeps rebooting every 3 minutes; what might be wrong
Welcome to the Apple Community.
Check that the HDMI cable is seated correctly at each end and try another cable if the problem persists. -
Should I use a network switch and plug my Yamaha A/V receiver and Yamaha DVD into it, then into the wireless router? Then the net into the routers net port???
HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help
-
Iphone keeps rebooting every 2 mins..help
iphone keeps rebooting every 2 mins..help
tried holding down on and home buttons ..not workingSee Here
http://support.apple.com/kb/HT1808 -
Iphone4 rebooting every time I use, the screen turn brown when reboot.
I have a Iphone4 acquired a three days ago, which is rebooting every time I use, the screen turn brown when reboot.what I can do about it?
If you just got it, take it back and get it replaced.
Maybe you are looking for
-
Command Link doesn't work - may be a bug
Hi all, I'm using JDev 11g. I added two pages to the adfc-config.xml file and a controlFlowCase from one to another. Page1--> Page2 The action name is "aaa". And then i added a command link to the Page1 and selected the action name "aaa". Now i'm cli
-
Iphone 3gs updated and now won't activate
Recently got iphone 3gs second hand and when I updated it on itunes via computer, it says it can't be activated because the 'server is temporarily unavailable' and on itunes on the computer it says the sim cant be recognised.. What do I do? Tried upd
-
Hello all. I was recently advised by another forum member to use JSTL to develop a system I am developing which is web based and accesses an Oracle Db. I am familiar with basic PHP in that you can define functions like register_user or login etc, wha
-
Hello Experts, Im trying to save my FX transaction when I encountered the below error. Limit management was not updated Message no. K-788 Then when I checked the limit utlization details, i encountered below errors: Transaction is not valued for the
-
Installing Oracle Apps 11.5.5: rapidwiz problem
Hi, I am trying to install Oracle Applications 11.5.5 on Linux Red Hat 7.1. I know this is not supported but my client wants 11.5.5 and the only Red Hat O/S it is certified to run on is 7.1 I have the following problem: rapidwiz calls runWizard.sh, w