LAP to WLC - Maximum RTT Delay Limits in the real World!

Hi,
I've seen the design related info that says the maximum RTT between the LAP and its WLC has to be less than 300ms.
I'm working on a solution where a number of the APs will be across WAN links where the RTT are from 250ms to 323ms. Has anyone experience of the types of problems that occur when the 300ms is exceeded, or indeed is there a real world RTT value that we should work to rather than the stated values? Has anyone installed Aps where the RTT is greater than 300ms and is it reliable? I ask as I can find no references to this on Cisco.com or in the CAPWAP RFC and our competiors (in the bid) using non-Cisco products are very clear that this is not a problem for them.
Any guidance much appreciated as usual.
Thanks. Phil.C

IMO
Voice issues would be the biggest concern.  Part of the reason we keep a 300ms RTT is because you need to have 150ms RTT for voice to work cleanly.  While the AP may stay connected at 323ms, you will most likely have some voice issues.

Similar Messages

  • I just bought a docking station for my iPad so I could plug into a mixing board and record a live show.  I was disappointed at the time limitation for the recordings.  What is the maximum amount you can record a song into GB for the iPad?

    I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand.  Unfortunately, I was unaware of the song length limitations of the iPad version of this program.  Basically, was unable to capture more than 15 minutes of the gig.  I've read other conversations on this forum and can't really determine the maximum amount of time this application can record.  Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this?  Also, is anyone aware of any other apps than could be used to record a longer please share.  Thanks.
    CP

    I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad.  Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment.  I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal.  Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time.  I hope this feedback helps.  One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

  • I can't join LAP to WLC 5508 in difference subnet

    i can't join LAP to WLC in difference subnet now i create 2 interface [management / ap-manager]
    management : 192.168.1.1 / 24
    ap-manager : 192.168.1.2 / 24 vlan 10
    ap-manager2 : 192.168.2.2 / 24 vlan 11
    ap-manager3 : 192.168.3.2 / 24 vlan 12
    connect with core switch 3 interface [access port vlan same wlc]
    or how create wlc interface for join with LAP please advise me or send capture screen for me to create all interface
    Thank you for best support.

    I created a video actually how to configure option 43 on my site.
    http://www.my80211.com/cisco-wlc-labs/2009/7/4/cisco-dhcp-option-43-configuration-nugget.html
    So when you fire up an AP it goes through a few steps to find the controller.
    1) It does a broadcast and if your APs are on the same VLAN as your apmangers/managment then she will connect
    2) If it isnt on the sanme vlan it will attempt to reslove CISCO-LWAPP-CONTROLLER or CISCO-CAPWAP-CONTROLLER. This is where you would need to create an A-record in your DNS server and reslove it to your MANAGEMENT controller IP address
    3) Also Option43. When your AP gets an IP address, you can add option 43 to the scope. Option 43 again tells the AP where to find the controller.
    Now you can do a manual prime to these as well. Extend your managment vlan to a switch and have the APs join. Once they take the download and config they will know the controllers ip address. And then you can deploy them on different vlans and they will join ...
    Does this make sense?

  • Is there any limitations to the maximum number of dimensions in MP?

    hi all
    Is there any limitations to the maximum number of dimensions can be created in Multi provider. If so how what is the maximum number of dimensions that can be created in a multi provider?
    regds
    haritha

    Hi,
    Maximum number of dimensions 16. Out of 16, 3 are system defined
    1.Datapacket
    2.Time
    3.Unit
    It is restricted to 16 because the maximum no of dimensions in any database is 16.
    Reward points if helpful
    Cheers
    Raj

  • Encrypted L3 Communications Between LAP and WLC?

    Hi All,
    I am working with a client that wants to put LAPs remote to their WLC (a 4402). The rub is that the communications between the LAP and WLC must be secure even across their private WAN! I have a couple of resulting questions if anyone is able to help;
    I can't find out if and what encryption method is (is it AES etc.?) used on the backhaul between LAPs and the WLC and what's involved?
    Terminology may be wrong here, this is not a wireless mesh, just conventional LAP to WLC
    The client's WAN is already encrypted (IPSec VPN over VPLS) in parts - what's the consequence of running AP<-->WLC with end-to-end encryption (if possible) over a WAN with IPSec, i.e. double encryption?
    Strange but true - any pointers will be much appreciated.... Phil.C

    With a 4400 series controller the control traffic between the AP and controller is already AES encrypted.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and controller is AES encrypted.
    As for running the traffic through a VPN, that should work.  The issue I typically see with this is with the MTU.  The controller will drop any packets with a data payload less than 32bytes.  Depending on the MTU over the VPN I have seen packets get fragmented and this to be an issue.  If you are using one of the CAPWAP versions (5.2 or newer) dynamic MTU discovery is part of the protocol and this MTU issue really doesn't exist.

  • 3750 Maximum HSRP instance limitation?

    I worked on a small project recently where we used a pair of 3750-12S (running the IP Services image) as a collapsed distribution/core layer with 2960's and 2950's for the access layer. In total we had 11 access-layer switches each connected to each 3750 over dot1q GigE links, each switch with 4 VLAN's, these VLANs were terminated on the 3750's.
    The intention was to use HSRP on each VLAN but we hit this limitation on the 3750 where we could only have a maximum of 32 HSRP instances. When I attempted to add the 33rd HSRP instance an error message was logged stating something like 'platform only supports 32 HSRP groups'. Since we used the same HSRP Group ID (standby 1) I thought we wouldn't hit this issue.
    Are there any workarounds or is this just a platform limitation with the 3750? We were running 12.2(25)SED1, I had a look in the 12.2(25)SEE release notes and didn't see anything related to HSRP being added.
    Thanks
    Andy

    The wording in the documentation is a little vague and this is why I assumed this was the same limitation you have with HSRP on the 6500 Sup2/MSFC2. This is where you are limited to 16 unique HSRP groups due to the number of MAC's available. You can get around this by re-using the same HSRP group number on each interface.
    The vague bit of documentation was:
    If HSRP is enabled, the switch can recognize 32 additional MAC addresses, each associated with a set of VLANs or routing interfaces.
    I agree once I looked at some other documentation I saw:
    HSRP can be configured on a maximum of 32 VLAN or routing interfaces
    I was slightly dissapointed that the 3550 does not have this limitation since the 3750 is supposed to be the logical upgrade path and with its stacking capability it can easily be placed in the distribution layer terminating lots of VLAN's.
    The customer does not have the cash to install catalyst 4500's since the difference in price is just too much.
    Thanks for the replies.
    Andy

  • Maximum permitted credit limits in FD32

    Hi Guru's,
    What is the use of Total Amount field in Maximum permitted credit limits tab in FD32.
    I have searched in SDN as everybody is telling the same thing..
    Total Amount: 10,000 INR (Overall Credit Limit in all credit control areas)
    Individual Limit: 4,000 INR
    All credit control area means ??
    Pls guide me with good example..
    Thanks
    Azeez.Mohd

    Dear Azeez,
    You use each Customer Code in particular Sales Area & Company Code.
    Now as these two are independent Organizational Elements the credit limits are controlled by Credit Control Area.
    Thus each Company Code is assigned to Credit Control Area & also each Sales Area is assigned to Credit Control Areas.
    Now it may happen that a single Customer buys from different Company Codes or different Sales Areas. Thus according to accounting principles we cannot let same Customer who has huge outsanding debit in one Company code or Sales area, freely buy from other Company code or Sales Area.
    Thus it may happen that one Customer belongs to multiple Credit Control Areas. so you have the option in FD32 tio set Credit Limitt for single Credit Control Area & multiple Credit Control Areas.
    E.g. Customer Code 1005 (who belongs to 3 CCA) has total Credit Limit of Rs. 1,00,000 but maximum Rs. 35000 in each CCA. Thus if this Customer hits an outstanding of Rs. 35000 in any CCA his Credit A/c would be blocked for all CCA...
    Hope this is clear...
    Thanks,
    Jignesh Mehta

  • Upload new LWAPP code to LAP before WLC code upgrade

    Hello,
    I read some where that I can pre-position (upload) the new LWAPP or CAPWAP to access points before I upgrade the WLC code. This will reduce the time it takes for the APs to download and run the new code from the WLC
    I am not able to find a document to instaruct me how to do it. I'd appriciate if someone can help me out with a link to a document.
    Thanks in advace
    BoG

    Hey there .. Check out this link
    http://www.my80211.com/cisco-wlc-cli-commands/2011/2/20/wlc-predownload-the-image-to-the-access-points-from-the-cont.html

  • Maintain tolerance limits in the Tolerance key

    Hi,
    Could any one help me how to maintain these Tolerance limits in the Tolerance key. This is an error I receive  while creating a PO.
    Best Regards,
    Sridhar.k

    What is the Error Mesaage no you are getting??
    Solution is as Follows
    Set Tolerance Limits for Price Variance
    In this step, you define the tolerance limits for price variances.
    When processing a purchase order, the system checks whether the effective price of a PO item shows variances compared with the valuation price stored in the material master record. In addition, it checks whether the specified cash discount value is admissible.
    Variances are allowed within the framework of tolerance limits. If a variance exceeds a tolerance limit, the system issues a warning or error message.
    In the SAP System, the types of variance are represented by the tolerance keys. For each tolerance key, you can define percentage and value-dependent upper and lower limits per company code.
    Standard settings
    The standard SAP System supplied contains the following tolerance keys:
    PE Price variance, Purchasing
    Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
    SE Maximum cash discount deduction, Purchasing
    Tolerance limit for system message no. 231. This is a warning message, which appears when the specified cash discount percentage exceeds the predefined tolerances.
    Note
    You can specify whether the system message appears as a warning or error message using the menu options <b>Environment -> Define Attributes of System Messages.</b>
    Activities
    Maintain the tolerance limits for each tolerance key per company code
    Regards
    Biswajit

  • Slow iMovie - Does it has limitation in the amount of video files it can edit?

    Dear All,
    I would like to do some videoediting of holidays video with my iMac i7 12gb ram.
    I have imported with iMovie my dv video and this worked fine. But starting from a certain point iMovie became really slow. Thinking of a memory issue, I added 8gb ram (now 12) but the problem persisted. So I decided to move video files from mac hdd to my gbit lan NAS, and than I got a firewire800 hdd.
    I got a MyBook Studio II (http://wdc.com/en/products/products.aspx?id=210) which I tried using first RAID1 and than to increase speed I configured into RAID0.
    Now, what I noticed is that if the project has a total of:
    - 29gb of video files, editing the project (move, delete, add) and play works quite fine. (project file size about:17mb)
    - 53gb of video files, editing is slow (about 7sec to move or delete a clip)  (project file size about:128mb)
    This happens both if the video and pj files are on the iMac hdd or in the firewire one.
    Does anyone of you know if iMovie has some limitations in the amount of video files it can edit, or if it is not performing correctly under certains conditions?
    Furthermore I will start editing 1080/50p video since I got a new camera. Keep going with iMovie is the right way? Do you suggest other products?
    Thank you for your advices,
    blp

    It appears you have enough processor speed, memory, and hard drives.
    Once these are taken care of, there are two main things that cause slowness 
    1) Events should be logical events. You should not dump all your footage into a single event. A project can use clips from multiple events and the performance is fine.  In DV for example, an event should hold maybe two tapes maximum. If a single tape has three logical events: say Birthiday, Vacation, and Christmas, make three events.
    2)  if you editing feature length movies, you should use Final Cut Pro X. For short movies iMovie is fine. For movies in the middle, it is more of a judgment call. The reason is that iMovie renders everything in one pass. Final cut Pro does background rendering as you go.  If this were the case for you, you would be able to edit at full speed, and you would only notice the slowness or a crash when you shared the movie.

  • This Apple ID has already restored to the maximum number of devices in the last 90 days

    Has anyone seen this error message "This Apple ID has already restored to the maximum number of devices in the last 90 days"? We get this when we use iCloud to restore a master backup to iPads in a school computer lab. The first 9 or so restores go without a problem and then we start getting the error. The iPads are running iOS 5.01.
    We previously used iTunes to do the restore and did not have a problem, but it takes a long time to deploy to the 25 iPads. We were hoping that using iCloud would be faster.

    9. You’re limited to a maximum of 10 devices. With the ability to re-download content from everywhere, Apple has limited the number of devices that can participate in iTunes in the Cloud for a given account. The new terms allow for a total of 10 devices, five of which can be computers running iTunes. This means you could have five iOS devices and five computers authorized, or one computer and nine iOS devices, or any combination of the two.
    Fortunately, this limitation only applies to iTunes in the Cloud features—you can still sync content directly from an authorized iTunes library to an unlimited number of iPods or iOS devices; the limitation only applies to authorizing devices to re-download or automatically download content directly from the iTunes Store.

  • "The rasterized image exceeded the maximum bounds for saving to the PNG format"

    Hi everyone, I'm using Illustrator CS4 and encountering the following problem:
    I made a level map in illustrator that exceeds 10000x10000 pixels. When I try to export the image as a PNG, I get the error "Could not complete this operation. The rasterized image exceeded the maximum bounds for saving to the PNG format". I tried saving in JPG and others as well, but got similar errors.
    How can I get around this?

    Here is an interesting discussion: http://bytes.com/topic/php/answers/735556-png-maximum-dimensions
    -- although the dimensions there are way larger than your paltry 10K x 10K. It appearts not to be a limitation of the PNG format, but solely from the software used.
    Here's a question. What on earth do you think you need 10K x 10K PNG files for?

  • Limitation on the number of characters in an input field

    Hi All,
    We are on EP 7.0 SP12.
    When I select an input field/text editor and map it to a field in a BAPI it truncates the value to 80 characters and thus I get the truncated value in the result.
    When I pass a value larger than 80 characters in length while doing test data service, it works fine and I face this issue only while passing the data from the screen. Is this a bug in VC? Or if any one has a solution to this?
    Regards,
    Murtuza

    Hi Ganesh,
    Following are the Answers regaring your queries:
    Query : 1
    There is no limitation on the number of components (objects, classes, tables, joins, hierarchies, lov's, etc) in a universe. But of course as the number of components increases, you could run into problems  related to performance.
    This depends on available RAM and the processing speed.
    Query 2:
    There is NO such option to select the number of table to be automatically inserted in to the universe because Suppose if you have 22000 tables in DB and you want only 1000 table ,you entered 1000 tables as the value to insert tables in Universe then How Designer will come to know which tables you want to take in Schema to build the Universe?
    It all depends on the DBA and Universe Designer which tables are important for organizations reporting needs.
    When you  create connection to the DB then Connection will fetch all table from the database and we canu2019t limit  DB data retrieval.
    I hope this Helps...
    Thanks...
    Pratik

  • Limitation on the number of Collections in a Page ?

    Hi All,
    Can I know if there is any limitation on the number of collections I can create on a page ?
    Thanks,
    Rads

    Rads,
    Collections are not limited to a page but to a user's specific apex session
    "Collections enable you to temporarily capture one or more nonscalar values. You can use collections to store rows and columns currently in session state so they can be accessed, manipulated, or processed during a user's specific session. You can think of a collection as a bucket in which you temporarily store and name rows of information."
    [http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/advnc_collections.htm#HTMDB13002] .
    The documentation should answer all your questions.
    Kofi

  • Limitation on the number of applications for a domain?

    Does anyone know if there is a limitation on the number of applications you can
    deploy on a domain for weblogic server 7?

    java -XX:MaxPermSize=... worked, so now the app server starts fine
    Thanks a lot.
    Rob Woollen <[email protected]> wrote:
    Jing wrote:
    Rob,
    I deployed 291 EJBs into the applications directory for a weblogicdomain, since
    each jars stands on its own, so weblogic treats them as individualapplications.
    Interesting. Is that really how you want to structure your server?
    The behaviour I ran into was weblogic server was not able to startcorrectly,
    it seems to stuck on some infinite loop, keep printing out the samemessage saying
    it's trying to active xxx.jar, but as soon as I reduce the number ofEJBs to a
    certain number(238) in this directory, weblogic server started correctly,deployed
    xxx.jar just fine.Without more information (like showing me what error it printed out),
    I
    can't tell you where the problem lies.
    However, the server is limited by the heap size, and the class size
    space is another limit you might hit.
    I would suggest increasing the heap size as well as the MaxPermSize in
    your JVM.
    -- Rob
    Is there any configuration I need to set on the domain?
    Thanks
    Rob Woollen <[email protected]> wrote:
    No limit.
    -- Rob
    Jing wrote:
    Does anyone know if there is a limitation on the number of applicationsyou can
    deploy on a domain for weblogic server 7?

Maybe you are looking for