Lap top configuration
Hello all,
Could you please tell me a good configuration for laptop to run sap r/3 and xi smoothly.
what i want to know will be
processor, ram, hard disk and operating system.
Thanks in advance
Rakesh
Hi,
Go for HP pavallion dv6000 series..2GB RAM, 160 GB HDD. it will work as its working fine on my Leptop:)
Also 100 GB is not fit as R3 need 65 GB and XI need 40GB apart from that thre should be some sapce where u can save ur softwares:)
why 160 GB for R3 and XI? Reason.
whn u create somescneatios or applying SP its requiredmemory so better to plan from now:)
Let me know if u have any querry.
Thanks
Farooq.
Similar Messages
-
I am having trouble connecting my iPad mini with my lap top that run Xperia
I am having trouble connecting my iPad mini with my lap top that run Xp
Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you-
1. Go to Setup -> Local Network and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
3. Restart your Router
Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
J -
My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in m...
My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in my computer in my room and my Dad has the router in his room. Hes connected but the wireless PCI card in my room says im connected to his router but i can't get on the internet?? i tryed the following.
1.Entering the IP address that listed on my computer (when i click the connection that says im connected and click the tab at the top to the right and press details and i put the Subnet Mask and IP adress in the spots avalible when i put up the linksys screen this when i did this it showed the connection working at the bottom right on my screen the little green connection on the computer but still can get on the internet, Befor i did all that i left all that blank and it said Limited or no connectivity)
2.My Dad put his IP adress in insted of the on on my computer but he left the DNS and Defalt Gateway Blank (Possible Problem let me know?)So is showed the connection at the bottom of my screen but still not internet. So my dad made a new connection called (Linksys) and had no Security on it and we connected to it but Guess what...No Internet
3.My dad's other connection Henry1 has security and in the phrase box i enter his Pharse number and it connected everything was looking good i clicked up the internet, at the bottom left on the internet screen said Detecting Proxy sever loaded a bit got me excited the BOOM!! No connection
4.I pressed START-RUN-typed CMD at command prompt typed ipconfig/all
this showed my IP and Subnet mask put those in for that in the linsys box provided Note: in the linksys PCI confige there are several options i have no idea on what to put there like the DNS and Defalt Gateway Subnet mask or IP adress Plesea tell me what to put here.
Please excuse my Spelling and typo's im sure there are plenty but im at the library and i gotta work fast.
and Please list all possible problems Note: i have no way of seeing my dads computer so im just guessing by what's on my computer so tell me what my dad might have done wrong also.
(Mod Note: Removed Email address.)
Message Edited by daikunzeon on 09-14-2007 07:12 AMOkay... first off let me know which operating system are you using and model and version no. of the adapter?? if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G PCI adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know.
-
Why won't my pc lap top connect to the internet since i installed airport extreme
Installed a new airport extreme base station . The problem is my sons pc lap top that use to connect to the internet with my airport express wont connect to the internet with airport extreme . It Connects to the wireless network but not the internet . All my other computers 2 apple lap tops an imac desk top and a kindle fire connects to the internet . The three macs are running mountain lion 10.8.2 His pc is running windows xp .Any help would be appreciated .
Use System Preferences: Network: Show Network Port Configurations, there should be a setting where you can enable and disable individual Network Ports. Make sure that all the ports are disabled, except for Airport, the MacBook might be trying to connect to Ethernet via another port and not using Airport, even though it appears to be connected to linksys.
OS X 10.5 Leopard is organized a little different from OS X 10.4 Tiger, but you should be able to find the place in that System Preferences screen where you can display and change the Network Port Configurations.
You might possibly need to check the wireless router configuration to see how many IP addresses it can assign or if there are some other connection restrictions enabled on the router, for more info see the User Guide -
I just bought the WRT400N router. I was able to connect 2 desk top PCs and one lap top using Wireless-N USB network adapters with dual-band and 1 compact Wireless-G us adapter. I am trying to install the latter on a lap top.
The telephone rep was able to help me connect the first lap top, but I forgot how to repeat the process.
Apparently, the lap top already has a wireless card, and the computer does not know which one to use. I guess I need to delete the old adapter, but I do not remember how.
I cannot get the lap top to get to the point where I need to type in the security key.
HELP?Yes, you have to delete your wireless network profile and then attempt to connect to your wireless network to get a chance to enter the Network Key...
To do this -
Click on Start and goto the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.
Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...
It will connect... -
Need new Lap Top Qosmio X500-02M
Hi all, new to this forum so looking forward to reading some of your expert advise. Time to upgrade my laptop......again, I am looking at the X500 02M. I want the best fastest lap top I can get my hands on for what I do... is this it??
*I will be using it for the following*:
High speed internet use, must be very quick at opening numerous pages and letting me scan between all open web sites with a quick refresh time.
Forum discussions, I talk on quite a few forums and they do take a while to refresh when I am on 3-4 at a time, must be quick here.
Photography and photoshop, I will have the Adobe Lightroom 3 (when it's realesed) downloaded on the laptop. I will also have a 500GB external hard drive with photos on it that. I will be importing from the external hd to photoshop. I don't want to be waiting all day to import and work on photos.
I will also be watching DVD's including Blue Ray and I know the X500 02M supports this function.
I realise this laptop is predominately for gamers but will it also fulfil my needs, I am not a gamer so if there is anything else out there that will do the same job in Toshiba please let me know. I am very keen on this model though and I have done a fair bit of research.
I will also be getting the Gaming Backpack and a few other odds and ends. Please recommend any additional extras you think would come in handy.
Cheers, look forward to the responses..I presume all Qosmios x500 are preinstalled with 64bit operating systems only.
Every Toshiba notebook is delivered with preinstalled recovery image. This recovery image contains operating system, all necessary drivers, Toshiba specific tools and utilities and also some additional applications.
Some of them you don't need and it can be removed from the system. Many Toshiba tools and utilities start with OS but some of them you don't need at all and they can also be removed from the system or disabled in MSCONFIG > Startup. Just optimize preinstalled operating system and make it faster. So you will be able to swath very fast between all applications you use.
One more thing: you can also configure power settings, CPU performance, cooling method and so on. With right settings you can have optimal hardware performance and pretty quiet notebook.
Mann, there is so much you can do with it. Anyway, X500 looks great. Friend of mine has one and he uses it for gaming. It is really great piece of hardware. -
My family uses a single lap-top as our home computer and several of us have i-pods that we like to synch, using I-tunes. Although we've tried to create separate I-tune accounts, our i-tunes playlists are getting wiped out when one of us deletes songs on our I-pod and it seems as though I-tunes is not distinguishing our distinct accounts and all i-pods are being synched to reflect the latest i-pod anyone makes on their respective account. It appears as though our distinct I-tune accounts are not being loaded on our lap-top when we sign in and unfortunately, when we're in I-tunes, there is nothing to indicate what account is on the screen. For all the glowing appraisals apple-related products usually receive, we are finding i-tunes and its interface with our respective i-pods to be a very, very frustrating experience.
Can anyone shed some light on this for a family of non-techies? Thx
Pegger64You need to create separate Windows user accounts if you want to seperate the behaviour of iTunes for each user. That also means separate iTunes libraries for each user.
Windows is a multi-user operating system but you are not using it properly. iTunes is not a multi-user application. No application is. You can't expect it to treat different users differently when they are all using the same computer user account.
Do you understand what I mean? -
my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
If the SSID is not the default then the reboot should fix it. -
Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products -
I have recently changed lap tops and moved my itunes library successfully.
However I cannot now synce my ipod classic with the new windows pc.
The lap top is not recognising the ipod.
I have spoken to apple and they think its a settings issue on my pc ? I have fully deleted and then reinstalled itunes .
can any one help ? This should be easy to resolve but appears to be a common issue when looking on the web.
Thank youHere is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I am trying to authorise a new lap top for my itunes account. The instructions to me to open my itunes and go to Store then choose "Authorize this computor" or if using an older version of itunes to go to the Advanced menu. Neither of these two items appear under "Store" when I open itunes. Am I in the wrong "Store" as I cannot locate anything thing similar on the open itunes.
BobAm I in the wrong "Store" as I cannot locate anything thing similar on the open itunes.
Bob
Bob,
They did not mean the Store; they meant the Store menu on the iTunes menu bar! It is in a row with File, Edit, View, Controls, Store, and Help, as shown below.
If you don't see the menu bar, enable it by holding the CTRL key and pressing B. -
My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .
Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
which uses imovie 11'.. previous lap top was mac book osx 10.5.8.. new one is mac book pro 10.6.6.. any help out there! i'm pretty useless at this stuff, might be really simple???
Thanks for nothing, as usual, Apple.
I had to redo the whole project from scratch on Windows Movie Maker.
Now I know which brand to trust on my next purchase. -
I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?
.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH -
Can't download iTunes to new PC lap top. "Itunes has stopped working, event name APPCRASH"
Hi
On hols my lap top died and I replaced it while away - so Lap top is Fijian, but my Apple I Tunes account is British - in case that's relevant.
Trying to download iTunes to the lap top, (windows 7) but I get the same error each time. I have tried uninstalling and reinstalling the software several times.
Error message says "iTunes has stopped working" and the details says the following...
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.6.1.7
Application Timestamp: 4f71aced
Fault Module Name: QuickTime.qts
Fault Module Version: 6.0.0.71
Fault Module Timestamp: 3d2d0310
Exception Code: c0000005
Exception Offset: 0013afd8
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: 87ab
Additional Information 2: 87abfdde4e44868a2d32f6948e899598
Additional Information 3: c382
Additional Information 4: c382d1e4d72a2899b9052b0e96ec9563
Really appreciate any advice, as I NEED to download thepetebox and the new Spiritualized albums for my beach time !!
ThanksFault Module Name: QuickTime.qts
Fault Module Version: 6.0.0.71
Taken at face value, that's an exceptionally old version number for that QuickTime component.
Do you have the QuickTime Player installed on your system at the moment? If so, is that also currently failing to launch (with or without an error message)?
Maybe you are looking for
-
Where is the remove programs option in Solaris?
I want to reinstall j2ee.
-
Using XSU for Storing XML data
Please how can I use the XSU API for storing XML documents in Oracle8i? I know part of the code to store a document but how do I import the XSU API? Do I have to download it or use it via Oracle? example: String xmlDoc = "my_xml_document"; Connection
-
Problems selecting color in action
Hi, I am trying to create an action that will select a color in a specific spot of an image, say top right corner, in order to delete that color. For example, if I have two portraits, one on a blue background and another on a green background, I need
-
File.exists() takes too long to return.
Hi. I have written a program which checks to see if a particular shared file is present on a number of different computers. The path to the file is the same on all the computers. I construct the File with IP + path. Then I call file.exists() If the r
-
Dear all, I can able to generate correspondences through email to the business partner.But i would like to know how to track if the email correspondence has been failed because of wrong email id or mail box filled .Please let me know how to meet this