Laptop 0xc0000001 Error

When I was trying to install new windows 8.1 and had completed few steps, then 0xc0000001 error occurred. So I can't install windows fully. How can I solve it? Please tell me!!

See if the link below helps http://teamwindows8.com/2012/11/error-code-0xc0000001-in-winodws-8/

Similar Messages

  • My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • When updating my ipod as prompted I now get error on my laptop --Runtime Error  Prog:C:\Prog Files\iTunes.exe   R6034. An application has made an attempt to load the c Runtime Library incorrectly.Please contact applicant support.

    When updating my ipod I as prompted got message on my laptop----Runtime Error Prog: C:\Prog Files\iTunes.exe  R6034 An applicationhas made an attempt to load the C Runtime Library incorrectly. Please contact support. Error 7(Windowserror 1114)

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99833)

  • 0xc0000001 error & i have no repair disk for win 8.1 - system will not repair itself

    0xc0000001 error & i have no repair disk for win 8.1 - system will not repair itself happened after microsoft updates

    Boot your computer into Safe Mode usually by tapping the F8 key at boot.  Select Safe Mode with Command Prompt.
    From there type  rstrui.exe and select a Restore Point prior to the time the problem started.
    If unable, you will have to perform a Factory Restore.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

    I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

    Uninstall and run the Cleaner Tool
    Uninstall Creative Suite 4 and point products (Mac OS X)
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • My i tunes wont open on either my laptop or my home computer laptop says error 7 windows 1114 computer says error 7  windows 126 what do i do

    help what do i do
    my i tunes wont open on either my laptop or my home computer laptop says error 7 windows 1114 computer says error 7  windows 126 what do i do?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/APSDaemon.dll/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll  HOW DO I FIX THIS?

    i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll  HOW DO I FIX THIS?

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • When i am connecting ipod with laptop, an error is coming that "this ipod cannot be used because the apple mobile device services is not started.

    when i am connecting ipod with laptop, an error is coming that "this ipod cannot be used because the apple mobile device services is not started???
    please revert.

    Did you try to restart the service, as described in this article?
    http://support.apple.com/kb/TS1567

  • HT1386 Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

    Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

    If you have some idea where the problem might be, you can get finer-grained control over what goes into the error log by setting nsslapd-errorlog-level appropriately. For the settings, see http://docs.sun.com/source/816-5608-10/config.htm#140331

  • Recently built a new pc, getting a 0xc0000001 error after installing windows 8

    I recently upgraded pretty much my entire PC after having my old processor go out. Built a new PC off of a MSI Z77A-GD65 motherboard, which is why I registered on this forum. Pretty much all the parts are new besides my GPU which was somewhat recently upgraded anyways. Anyways I built this PC and everything in functioning perfectly hardware wise but for some reason Windows 8 just doesn't want to boot up after I ran the installer on a fresh hard drive. I keep getting this 0xc0000001 error and I tried all sorts of repair options which I fear may have screwed something up since I am now getting two windows 8 installations showing up.
    Anyways I just want to get windows working so any help would be appreciated.

    Here is one solution that you might try:  http://techmell.net/how-to/fix-error-code-0xc0000001-windows-8/

  • Laptop kernel error while updating Nokia Asha200 t...

    My phone is Asha 200.
    The Nokia suite version is 3.8.30.
    Laptop is Windows8.
    I start the Nokia suite on laptop and then connect the phone via USB. The phone gets recognized and there is the software update also available. I start the update process. The software starts the backup process and then the phone restarts. This process is 15% complete, after which the laptop windows crashes giving me an error of KERNEL Update failure.
    Don't know where the problem is... phone or OS????

    Presumably logged in as "administrator" I seem to remember some users had similar issues whilst Nokia Suite was in Beta with Windows 8 but thought resolved. Is this 32 or 64 bit version by the way?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • HT203175 I have just downloaded itunes onto my laptop operating sytem windows XP.  When I start up my laptop an error message appears, "The proceedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link lirary SQLite3.dll

    Downloading new version of itunes onto my laptop and now when I start up there is an error message "the proceedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll"  Can anyone advise on how to correct this safely.

    Try uninstalling your MobileMe control panel. Does that clear up the error?

  • I cannot install itunes on my windown 7 laptop.  Error says "computer not modified".  Please help me with this problem.

    I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7.  Error says " computer/system not modified".  Please help me with this problem. 

    Hello there, jag123059.
    The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Can not install ITunes on my laptop....no itunes are remaining on the laptop. Error says itunes can not be configured.

    There is no ITUnes grogra on my laptop....so nothing to delete. ITunes error says that it can not be configured. Have tried dumping my temp file and restarting....no help.

    Hi jackdaniels63,
    Welcome to Apple Support Communities.
    Try following along with the article linked below, which will have you completely remove iTunes and it's related components before trying to reinstall iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    -Jason

  • Hp recovery on laptop gives error message "destination drive not connected"

    I'm trying to carry out factory reset on my 2012 G6 laptop product code B2Y48EA*ABU  serial no. [Personal Information Removed] to factory settings using set of 5 recovery discs
    I followed the procedure  shown here  (although the screen messages are slightly different)
    http://support.hp.com/gb-en/document/c01867418
    I started the laptop with disc 1 in the dvd drive and the hp program was displayed. I selected "factory reset" and followed promts
    When the 4 th disc is in dvd drive and the process is about53% compltete it stops with the error message 
    "destination drive not connected"
    and fails
    Earlier the recovery manager reported that the partion on the hard drive had been re-forrmatted so the drive was connected then!
    All help and suggestions appreciated

    Hi there @Teka,
    I understand that you are having trouble with a System Recovery to a factory image using recovery disks. I am happy to help you with this.
    Are those five disks a set that you created using the recovery manager, or is it a set you ordered from HP?
    Is there any sign of damage, scratches or smudges on the disk it fails on?
    Have you tried cleaning the DVD drive?
    Also take a look through these pages, in particular the troubleshooting page, and see if anything there is of use.
    Performing an HP System Recovery (Windows 7)
    Troubleshooting HP System Recovery Problems (Windows 7)
    Let me know how it goes for you.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for

  • FCPX Export issue. Item cannot be shared while it is still referencing media on the camera

    I am having issues with exporting a project I just shot and I missed my delivery day and am now late. Need help ASAP. I'll try to keep this as brief as possible and stick to the pertinent information. The Shoot: -2 Panasonic HVX-200's shooting on P2

  • Export performance are very low in "TOAD"?

    Dear all, I have very wired problem that is I run the sql and the result set should be more than 50,000 records. I use the standard function to export into excel file which provides by TOAD. However I don't know why the export are very slow 6 seconds

  • Can't sync iPad after iTunes 11.0.3 update

    A bit perplexed. Trying to sync my iPad mini (iOS 6.1.3) and it is refusing.  No errors are shown in iTunes. I've tried switching off WiFi syncing and various other options. Every time the sync fails to do anything (either by USB or WiFi), this conso

  • Syncing mobile phones on C510i

    Hi there, the phone that my employer gave me has the option to save varios mobile phone types to each one of your contacts, such as "mobile", "work mobile", "personal mobile".  Although they get syncronized with my iMac's address book they don't show

  • Maintaining data in standard table

    Hi experts, We have a requirement in which we have to maintain a standard customizing table in production. Currently user is maintaining entries through SPRO, including them in transports and getting it moved to Production. He want to overcome the cu