LAPTOP CONFIGURATION for ECC 6

Hi Freinds,
Would like to purchase a laptop to install SAP ECC 6 Version for training purpose
Could anyone please suggest the laptop configuration.......
Thanks in advance....
Moderator message: not related to ABAP development.
Edited by: Thomas Zloch on May 9, 2011 10:08 AM

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

Similar Messages

LDAP Configuration for ECC 6.0 ( ABAP Stack only)

Hi,
Can any one guide me with the steps for the LDAP Configuration for ECC 6.0 ( Abap stack only).
Some of my observations are....
I can see the LDAP Support in the Installation master at the following path.
1. Additional Software Life cycle Tasks --> Application Server --> LDAP Support.
But the prerequisites for this task is given as "You must have extended the LDAP schema for the sap data types before.".
When i am goint thru service market place i came across the following note.
Note 888848 - Notes on schema enhancement with RSLDAPSCHEMAEXT.
Thanks,
Tanuj

Dear All,
We are trying to configure the LDAP using with active directory . In the
step of "Synchronization of SAP User Administration with LDAP
Directory"when executing the report"RSLDAPSYNC_USER" we are facing one
error.
Please find the trace file and error screenshot in the attachment.Please help us on
priority.
Please find the Trace log in the below:
RFC destination : LDAP_LDAPSE-01
Tracelevel      :      8,704
F5: Shutdown F6: Clear list F7: Dump status F8: Refresh list
[Wed Jun 26 11:15:38 2013]
Slot 0 (WIPROTECH): >>> ldap_initU(host="abg-mumabc-dc1.abgplanet.abg.com", port=389)
[Wed Jun 26 11:15:39 2013]
Slot 0 (WIPROTECH): <<< ldap_initU() == <NOT NULL> := connected
Slot 0 (WIPROTECH): >>> ldap_set_option(version=3)
Slot 0 (WIPROTECH): <<< ldap_set_option() == 0
Slot 0 (WIPROTECH): >>> ldap_simple_bind_sU(dn="poornataad", password: not initial)
[Wed Jun 26 11:15:40 2013]
Slot 0 (WIPROTECH): <<< ldap_simple_bind_sU() == 0 := success
[Wed Jun 26 11:15:43 2013]
>>>>Required attributes table
Line    0: "CREATETIMESTAMP" (length 15)
Line    1: "MODIFYTIMESTAMP" (length 15)
Line    2: "SAPUSERNAME" (length 11)
<<<<Required attributes table
Slot 0 (WIPROTECH): >>> ldap_search_sU(base="CN=poornataad,CN=Users,DN=abgplanet,DC=abg,DC=com", filter="(&(OBJECTCLASS=user)(SAPUSERNAME=*))", scope=2)
Slot 0 (WIPROTECH): <<< ldap_search_sU() == 91
>>> ldap_msgfree()
<<< ldap_msgfree()
Slot 0 (WIPROTECH): >>> ldap_unbind_s()
Slot 0 (WIPROTECH): <<< ldap_unbind_s() == 0
Please find the error screenshot in the below.
Regards,
Dilip Sampath.CH
+91-9619735957.

What is the "right" laptop configuration for Engg Student

Hello All
I would like to get your perspective on getting " right" type of configuration for an Engineering student . Apart from solid performance & speed , battery life, portability is also a factor ..
Thanks a ton!
Ram

What sort of engineering are you doing?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Configuration for ECC 6.0

HI friends,
Can anybody tell me what is the configuration required
for installing ECC 6.0
regards,
phani.

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

SOAP Configuration for ECC 6

Hi,
currently we are using Business connector to transfer XML files from SAP to 3rd Party. but as per the business requirements we need to configure SOAP in ECC 6 with only ABAP stack.
could some one help me to configure SOAP process in ECC Application, to send XML files to the external parties.
Thanks,
Ravi
201 724 6600

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

Laptop configuration for using VM test environment for ORALCE

Guys,
I would like to setup an VM environment for learning ORACLE on laptop. What sort of configuration of laptop will be good for making use of it?
Regards,
sakthivel

Hi Sakthi,
That depends on the requirement of your testing.I would recommend you Min 4GB RAM (If it includes RAC testing) too.

Laptop configuration for OBI EE.

Hi,
I've an Intel core i5 laptop with 4gb ram (2.85 gb usable) and windows 7 professional 32 bit os. It's got hard disk failure so I need to get it repaired.
With regards to OBI EE I am happy with the current config. The only major issue that I am facing is OBI EE takes 15 to 20 minutes to start up. So if I want to try out something quickly I either postpone it till I get more interesting topics or due to time constraint I ignore it. And I hate it.
If I upgrade the os to 64 bit and add more ram, along with fixing the laptop's hd issue, will I get overall improved OBI EE 64 bit software performance esp., OBI EE service start up time? Currently I have OBI EE 11.1.1.7.0 32 bit. (Pls note I'm not referring to query performance.)
Any suggestions? I hope the rpd and we catalogs will be fine without any issues once I have 64 bit software installed?
Regards,
Manoj.

Manoj,
However, QuickStart dashboard (SampleApp Lite) is relatively faster and SQL Developer tool remains instantly usable
As you mentioned above SQL Developer,So I mean to say uninstall and insall sql developer
The size of the RPD and webcatalog may affect start up times of the services. It is recommended to clean up the RPD and webcatalog to remove redundant objects.
Thanks,
Sasi Nagireddy..

ESS Configuration with ECC 5.0

Hi
I am trying to configure ESS with ECC 5.0 as the HR server
My J2EE system is WAS 7.0 with EP 7.0 and patch level 12.
I am getting the following error when I am trying to get the ESS pages in EP
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcXssMenu.AreaConfig.AreaConfig_Output.Serviceinfo): structure field Helperservice not found
I was successfull in configuring ESS with ECC 6.0. I did the same configuration for ECC 5.0 also.
Can anybody help me
Thanks

Hi Jeevan,
Please check your land scape is as per the notes:
1007341     SAP ERP 2004/2005 - supported ESS/MSS system landscapes
824757      Dependencies between SAP ERP component lists
1034385     BP ESS/MSS ERP2004 and ERP2005 on EPNW04s
1004528     SAP Self Services: Business packages and components
BR, Abdul

LAPTOP CONFIGURATION ECC 6

Hi Freinds,
Would like to purchase a laptop to install SAP ECC 6 Version for training purpose.......
Could anyone please suggest the laptop configuration.......
Thanks in advance....

>
What kind of problems did you get? I'm 100 % sure they are not "processor" related.
> really,when i tried to install SAP ECC6 on i3,i5,i7 with Window 7 then i got lot of installation issue.
They are most likely then due to Windows 7, not to running Windows 7 on one of the mentioned CPUs/processors.
>
iSeries is a machine group from IBM - it's the former AS/400 :)
> here we are taking about laptop not for servers. please try to understand.
I know, that's why I used the smily at the end. I just want to get the terms proper. It's like calling a car "BMW" instead of "car".
If someone says he has "installation problems" as a generic statement all I can do is comment on this equally generic. It's just not true that one can't install (technically) ERP 6.0 on an i3, i5 or i7 processor. Technically it's possible if that CPU/machine can run a Windows operating system that is supported by SAP installations. Whether it then works or not or how fast and with how many issues is a different topic but the problems are not CPU related.
All I'm trying to say is: It doesn't matter what CPU/processor type your laptop has as long as it can run a supported operating system for a SAP installation.
Markus

SAP IDES ECC 6.0 configuration for ess/mss

Hi,
Iam new to sap . i want to practice various scenarios in ess/mss in my own pc which is installed with ecc 6.0 . what are the configuration to be made in ecc 6.0 for maintaining about 10-20 users for using ess/mss scenarios. i have a knowledge on webdynpro java and little knowledge on ep and using r/3 server. The 10-20 users created should be able to use ess/mss through portal .
So, list the steps configuring for 10-20 users for using ess/mss in ecc ides 6.0 server.
Thanks & regard
prasad

<< Do not post the same question across a number of forums >>

MDD to ECC Configuration for Vendor PI Content

Hi,
I am working on MDM to ECC Scenario for sending Vendor details to ECC using the standard maps available in MDM BUSINESS CONTENT 7.1 SWCV.
There are two message mappings:
1) CREMDM.CREMDM04 to CREMAS.CREMAS05
2) CREMDM.CREMDM04 to ADRMAS.ADRMAS03
How should I configure the scenario in Integration Directory.
Do I need to use any splitting condition using Xpaths?
Can you send any blogs or SAP Notes avaiable for this?
Best Regards,
Harleen Kaur Chadha

Hello Harleen,
Maybe this can help you
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/107fabbb-b8ca-2b10-04b5-8f34729ef228
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daa51a96-0b01-0010-738f-a0ecfd06104e
Regards,
lpbuff

System configuratin needed for ECC 6.0

Hi all,
To load IDES ECC 6.0 with Solution Manager in an external Hard Drive ( eSATA HDD ) and then access it through laptop what is the minimum laptop configuration needed ? Laptop currently has Dual Core Processor, 1 GB RAM
Thanks
Stav06

> To load IDES ECC 6.0 with Solution Manager in an external Hard Drive ( eSATA HDD ) and then access it through laptop what is the minimum laptop configuration needed ? Laptop currently has Dual Core Processor, 1 GB RAM
A Solution Manager is a combined ABAP + Java instance, if you installed ERP 6.0 also with the Java part you will need
- 1024 MB Java heap for Solman (real memory)
- 1024 MB Java heap for ERP Portal
- ~ 500 MB for SolMan ABAP
- ~ 500 MB for ERP ABAP
- two databases
So I would
- not use a 32bit OS
- not try to start both with less than 4 GB RAM
Be aware of the fact, that not everything is installed on the harddisk, lots of configurations/permissions/users are created LOCALLY on the machine you installed which you won't have if the installation was done on a different system. So you may not even be able to start the system.
Markus

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

Mapping Error in XI Configuration for MM-SUS Scenario

Dear Experts,
I am working on MM-SUS Classic Scenario,
We have done all basic setting in SRM, ECC and SUS.
Now we are configuring XI Scenario(Working on ESOA Architecture), while configuring XI Scenario, I follow the mention steps :
I have started from Integration Builder in XI (using T-code SXMB_IFR)
1. I have assigned two Business System( for ECC and SUS) In integration Builder (Creates Communication Channels Automatically) .
2. Modify IDOC and XI Communication in ERP and SUS Business system respectively.
3. Now select Tools -> Transer Integration Scenario from Inegration Repository and Create Scenario in it properly
(Included Assign Services, Configure Connections, Generate etc).
4. In last, save scenario.
After configuration XI I am not getting Scenario Data (Objects and Configuration Overview data) in it.
When i click to Check Configurability under Model Configurator of mine Scenario, I found following Errors ( I am Mentioning only some errors) :
Component View SE_Services_Procurement: Connection from Send Z_CREMAS_SUSMM to Business Partner empfangen has no mapping
Component View SE_Services_Procurement: Connection from Send_PO_From_MM to Receive_Purchase_Order has no mapping
Component View SE_Services_Procurement: Connection from ServiceAcknowledgementConfirmationRequest to ServiceAcknowledgementConfirmationCreate has no mapping
Component View SE_Services_Procurement: Connection from InvoiceRequest senden to Receive INVOIC has no mapping
Kindly correct me if am missing some, and help me out, what should have been done to remove this mapping errors.
Thanks in advance,
Regards,
Pawan Keshwani

If you are on >= SP9 you do not need to perform that action at all.
Go to SU01 transaction assign SAP_XI_DEVELOPER role for the desired users and try it.
regards
Shravan

How to install the ADS for ECC 6.0?

Hello All,
I have few questions before I can start with my problem
1) Is the ADS a part of the WAS for ECC 6.0 ?
2) Is any Ehp available for installing the ADS separately?
My requirement is to have a PDF application run in ECC 6.0 . I have no idea about the architecture like weather it includes the ADS as we have for Java WAS 6.0 SP 14.
What my team is doing is deploying the application in the Java WAS currently. But they need to deploy it to the same server i.e. ECC 6.0.
I would like to know what is the process to install the ADS in ECC 6.0. And if it is already installed then how to configure that.
Let me know if you have any questions. Looking forward to you.
Regards
DK

Hi Dipendra,
For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT user id creation and roles assignment and RFC destination creation etc..
Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
You can start by read the note 736902 to get the credentials for the ADS.
Hope this answers your question.
Thanks,
Greetson

LAPTOP CONFIGURATION for ECC 6

Similar Messages

Maybe you are looking for