Laptop configuration for OBI EE.

Hi,
I've an Intel core i5 laptop with 4gb ram (2.85 gb usable) and windows 7 professional 32 bit os. It's got hard disk failure so I need to get it repaired.
With regards to OBI EE I am happy with the current config. The only major issue that I am facing is OBI EE takes 15 to 20 minutes to start up. So if I want to try out something quickly I either postpone it till I get more interesting topics or due to time constraint I ignore it. And I hate it.
If I upgrade the os to 64 bit and add more ram, along with fixing the laptop's hd issue, will I get overall improved OBI EE 64 bit software performance esp., OBI EE service start up time? Currently I have OBI EE 11.1.1.7.0 32 bit. (Pls note I'm not referring to query performance.)
Any suggestions? I hope the rpd and we catalogs will be fine without any issues once I have 64 bit software installed?
Regards,
Manoj.

Manoj,
However, QuickStart dashboard (SampleApp Lite) is relatively faster and SQL Developer tool remains instantly usable
As you mentioned above SQL Developer,So I mean to say uninstall and insall sql developer
The size of the RPD and webcatalog may affect start up times of the services. It is recommended to clean up the RPD and webcatalog to remove redundant objects.
Thanks,
Sasi Nagireddy..

Similar Messages

LAPTOP CONFIGURATION for ECC 6

Hi Freinds,
Would like to purchase a laptop to install SAP ECC 6 Version for training purpose
Could anyone please suggest the laptop configuration.......
Thanks in advance....
Moderator message: not related to ABAP development.
Edited by: Thomas Zloch on May 9, 2011 10:08 AM

HI,
Thanks for your fast reply, Is 1 GB ram suggestable or more required...
regards,
phani.

What is the "right" laptop configuration for Engg Student

Hello All
I would like to get your perspective on getting " right" type of configuration for an Engineering student . Apart from solid performance & speed , battery life, portability is also a factor ..
Thanks a ton!
Ram

What sort of engineering are you doing?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Laptop configuration for using VM test environment for ORALCE

Guys,
I would like to setup an VM environment for learning ORACLE on laptop. What sort of configuration of laptop will be good for making use of it?
Regards,
sakthivel

Hi Sakthi,
That depends on the requirement of your testing.I would recommend you Min 4GB RAM (If it includes RAC testing) too.

How to use different configurations for KDE Plasma?

I typically use my laptop in two ways: single monitor and dual monitor. I like to have in the two cases two different sets of widgets and plasmoids, so I wonder if it's possible to have multiple configurations for Plasma and load the desired one when needed. I searched around for a solutio but didn't find anything.
Right now, I'm using a rather awkward method: I have two sets of Plasma configuration files for single and dual monitor setup (ie., plasma-desktop-appletsrc-single and plasma-desktop-appletsrc-dual) and two startx scripts which, before starting KDE, copy the single or dual monitor configuration on the standard Plasma config file (cp $HOME/.kde4/share/config/plasma-desktop-appletsrc-dual $HOME/.kde4/share/config/plasma-desktop-appletsrc). I'm sure there are better ways to have a dynamical Plasma configuration, since my zero-order solution has many drawbacks, for example I loose the modifications I make on my desktop (since Plasma saves them on plasma-desktop-appletsrc which is overwritten at next startup).
Can anyone please help me? Thanks.

For such a purpose KDE Plasma provides Activities. Here you can find more about that:
http://userbase.kde.org/Plasma#Activities
There is also a nice plasmoid for easy Activity managing:
http://kde-look.org/content/show.php/Ac … ent=136278
I hope, this helps you...

Best RAM configuration for Macbook (mid 2007)

Hi, I have a Macbook (mid 2007) with 1 GB ram and I would like to upgrade. Currently I have 2x512MB, so both of my memory slots are taken. Is it a good idea to have one 512MB card and a 2GB card in the other slot? Otherwise, what is the best RAM configuration for a mid 2007 macbook?
I am also looking into purchasing this memory card for my macbook, is this a good choice?
http://www.amazon.com/Crucial-2x1GB-200-Pin-667Mhz-SODIMM/dp/B000FQ2JLW/ref=sr_1 _3?ie=UTF8&qid=1307335802&sr=8-3
Any advice would be very much appreciated!

Kappy wrote:
In these early models, Ronda, the benefit is very marginal.
Yes, I read the figure 128 in regards to the benefit. Something about interleaving, maybe?
In doing a Google search for that article I saw, I found this:
http://www.mac-forums.com/forums/apple-notebooks/99215-4gb-ram-my-macbook.html
the maximum amount of RAM your laptop can take is 3.3GB. So while you can physically insert 4GB of RAM, OS X will only be able to see 3.3GB of it.
But I don't know how knowledgeable that poster is who says it can utilize 3.3 GB. I do know that the full 4 GB shows up in the System Profiler on my MacBook Core 2 Duo 2.16 GHz.

Needs to be configured for Windows... but it already is!

I just bought a brand new 80GB iPod Classic today. I hooked it up to my laptop's USB port, and the first time it showed up in my iTunes directory. Unfortunately iTunes informed that my iPod was corrupted, so I restored it. This happened TWICE.
The third time I hooked it up, the iPod didn't show up in the directory, but a pop-box appeared telling me that the iPod needed to be configured for Windows, and would I like to configure now? I clicked yes, and nothing happened. Once I checked the iPod, I saw that the Version was 1.0.2. PC.
Any ideas how to get my iPod up and running? Thanks in advance.
iTunes version: 7.4.3.1.
iPod version: 1.0.2. PC

You need to connect your phone to iTunes on your COMPUTER, not on your phone.

Oracle BI SE1 configuration for Finantial

Hi,
I am configuring Oracle BI Standart Edition one. My aim is to use it as reporting tool for EBS finantials.
Please inform me, does BI SE1 provide a predefined model for EBS finantials, including cubes, dimensions, tables, mappings, etc?
Does it come with BI SE or I should build it manually?
Thank you.

If you're looking for pre-configured content (ETL routines, warehouse, rpd, dashboards & reports) then you're looking for OBIA: http://www.oracle.com/appserver/business-intelligence/financial-analytics.html
OBISE1 doesn't come with pre-configured content.
Cheers,
C.

Notebook/Laptop optimized for Photoshop CS5

I researching the options to get a new laptop, primarily for photo processing in CS5, Photomatix etc (Very minimum video editing). From my research, I have found following recommendations for optimized performance:
- 64 bit OS
- Quad Core processor
- Faster Hard drive (preferably Solid State Drive, if budget permits)
- Graphic Card (1GB recommended)
I cannot make my own machine, so I am searching online for HP, Dell, Lenovo etc and getting following for about $1200. Any recommendations or suggestions which can help in improving this configuration and making the right decision?
Thank you very much
Operating system
Genuine Windows 7 Home Premium 64-bit
Processor
Intel(R) Core(TM) i7-720QM Quad Core processor (1.6GHz, 6MB L3 Cache) with Turbo Boost up to 2.8 GHz
Graphics card
1GB ATI Mobility Radeon(TM) HD 5650 Graphics [HDMI, VGA] - For Quad Core Processors
Memory
8GB DDR3 System Memory (2 Dimm)
Hard drive
640GB 5400RPM Hard Drive with HP ProtectSmart Hard Drive Protection

Thanks for your helpful responses.
External display: I have a Samsung 22" monitor, whihc I will use for my work.
eSATA port: thanks, I am checking into this option, if I can't get a dual hard drive laptop.
I compared a Dell Mobile Workstation and got following specs for about $3000.Compared to the HP above, this one doesn't provide a quad core processor and 8GB RAM. However, the graphics card is lot better and it will support 2 high speed HDDs with RAID configuration. Seeing the proce difference, do you guys still suggest this laptop as compared to the one above? I am a bit confused here. Thanks again for your suggestions.
Mobile Precision M6400
Intel® Core™ 2 Duo P8700 (2.53GHz 3M L2 Cache, 1066MHz) Dual Core
edit
Operating System
Genuine Windows® 7 Professional, 64-bit
edit
LCDs
17" UltraSharp™ WXGA+ (1440x900) LCD Display
edit
Graphics
NVIDIA Quadro FX 3700M, 1.0GB Discrete
edit
Memory
4.0GB, DDR3-1333MHz SDRAM, 2 DIMMS
edit
Internal Keyboard
Internal English Backlit Keyboard
edit
Fingerprint Reader Options
No Fingerprint Reader
edit
Camera / Microphone
Integrated 2.0 MP webcam with dual digital array microphone
edit
STORAGE OPTIONS
RAID Configuration
All Hard Drives, RAID 0, 2 drive total configuration
edit
Primary Hard Drives
160GB Hard Drive, 7200RPM with Free Fall Sensor
edit
Secondary Hard Drive
160GB Hard Drive, 7200RPM with Free Fall Sensor
edit
Media Bay Devices
8X DVD with Cyberlink Power DVD™, no media
edit

Estimate time period for OBIA 11g Vanilla Impelementaton For HR,Financails

Hi Guru's
I need to know Time period for OBIA 11g Vanilla Implementation for Following Appliations Source System is Oracle R12;
1- HR
2- Procurement
3- Financails
4- Supply Chain and Order Management
To implement all these four Application as once without any customization how long its going to take?????
Looking for your HELP....
Regards
Sher

Sher,
As per my knowledge Normally for any OBIA implementation a module
1st week for installation and Configuration of everything (ETL,DAC,RPD)
2nd week to load the data and to make necessary loads(inc/full) using DAC/ETL
3rd/4th week would be for testing the reports/Data and moving to production.
Note : Above time-lines varies by experience and also without any customization
Please post your questions on OBIA : Business Intelligence Applications
Thanks,
Saichand.v

Laptop configuration

Hello all,
Could you please tell me a good configuration for laptop to run sap r/3 and xi smoothly.
what i want to know will be
processor, ram, hard disk and operating system.
Thanks in advance
Rakesh

I think
Intel 2 dup processor 2.2gh +
4GM memory
200 HDD
and windows 2003 would be fine for your installation ( I assume its for your learing purpose )
Thanks
Prince Jose

Best configuration for maximum WiFi speed?

Hello, I am trying to configure my network for the best WiFi speed. I have a Comcast/Xfiinity Modem/ Wireless Router (SMCD3GNV) with speed of 50 Mbps down and 10 Mbps up (acutally 87 down and 11.5 up last time tested) and 3 Airport Extremes, and a 16 port GB switch. I am really confused about what should be plugged in to what and how to set up the Airport extemes for best WiFi speed for laptops, iphones and iPads etc. . I have a large house and want the WiFi to be available everywhere. Shoud I plug the Modem/Router and the first Airport extreme into the switch and then set up the other 2 Airport extremes as extended networks, or should I plug all the Airports into the switch, or should I plug just the first Airport into the switch and then connected the other 2 Airports into the 1st? Like I said I am really confused. Any help you can offer would be appreciated.
Thanks in advance,
Vic

For the best configuration for maximum WiFi speed, connect all your Extremes to the switch.
The effective range of your wireless network will be a function of the distances the Extremes are from one another. Each will be limited by Ethernet specification to a maximum distance 100m from the switch or adjacent Extreme.
This picture may help:
From Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

Optimum Disk Configuration for CS6

Hi Hardware forum members,
I have read the Generic Disk Guidelines, read the various forum threads on this topic, watched the Adobe Video2Brain videos and am still confused re optimum disk configuration for CS6 Premier Pro.
( lots of disagreemnet on HDD RAID0 versus SSD )
The video and advice from Adobe is to have a separate disk for each disk for each type of file so that you are not reading and writing from the same disk.
I rang Adobe technical support and they advised me that if I had 4 individual separate SSD's they would allocate one to the O/S and Programs, one to the Media and Media Cache which they said had to be on the same disk, one to the Project and finally one to the Export and Preview.
I then asked them if I purchased another SSD so that I had one for the O/S and Programs and then 2 x 2 in a RAID0 configuration, how would they allocate the the drives. They said they would allocate one RAID0 volume to the Media and Media Cache and to the second RAID0 volume they would allocate the Project, Export and Preview. Doesn't this contradict the advice to keep the files separate, as your Project files would be on the same disk as your Export and Preview ?
In any case, they said the 2 X 2 RAID0 configuration would give the better performance.
What do the forum members here think will be the better disk configuration from the two options above ?
What about TRIM support for SSD'S in a RAID0 configuration - is that still an issue, before I commit to the 2 X 2 SSD in RAID0 configuration.
FYI - Backup will be to 4 x 3tb Seagates in a RAID5 config and the SSD'S under consideration are the Samsung 840 Pro's.
Your thoughts and recommendations will be most welcome.
Kind Regards
Martin.

Hi Jim,
Thank you very much for taking the time to respond to my post - it is much appreciated.
I have ruled out the 2 x 2 ssd in raid 0 as an option due to the lack of TRIM support for this configuration as the performance would just deteriorate over time.
Your advice makes sense as everybody's individual needs and preferences are different.
I'm still going to go with a combination of individual SSD drives ( no raid and just depends how many individual SSD's I decide to allocate) with the RAID5 array of 4 x 3tb disks for backup (around 9tb usable space ). The machine wont just be used exclusively for video editing and hence this is swaying my decision towards the SSD's.
I could be persuaded to change the RAID5 backup to a RAID10 with the same disks but this would give me more speed and safer redundancy, albeit with only 6TB of usable space. ( I know the backup has nothing to do with the CS6 performance or configuration, just mentioning it ).
FYI, the machine is a desktop, not a laptop, with an ASRock Extreme 11 x79 mb which gives me enough SATA3 connections and has onboard RAID options
Other components are a 3930k processor, 64 gb 8 x 8 Corsair Vengenace 1866 c9 memory kit, and an EVGA GTX680 4G Classified Video Card.
Thanks again for taking the time to reply - much appreciated
I'm looking forward to getting the build up and running
Happy to hear anyone else's thoughts on this topic too.
Kind Regards
Martin.

Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

Good afternoon,
I am really struggling with a deployment of 10 iPad Minis.
The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
I have configured Apple Configurator in the following way:
Under Prepared:
Settings
Name is ticked with 'Number sequentially starting at 1'.
Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
Update iOS is set to "When update is available". Erase before installing is ticked.
Restore is set to "Don't restore backup".
No profiles are listed in the profiles section.
Apps
I have copied in some appropriate apps.
Setup
Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
I have not configured Device Enrollment.
In "Configure Settings..." Device Enrollment is not configured.
After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
Hello, slide to setup
Select language, UK selected
Select Your Country or Region, UK selected
Choose a Wi-Fi Network, correct network selected and authenticated
Location Services: Enabled
Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
Have skipped configuration and erased iPad before trying again, same problem.
Any suggestions would be really appreciated.

FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

HRMS Analytics configuration for Oracle EBS

Hi ,
I have to configure HRMS Analytics for Oracle EBS(Referring Configuration Guide for OBIA 7.9.6.3) , I am new to OBIA :
I just started working domain Values (csv files), I have few queries for the same:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
Any help in this regard will be highly appreciated.
Thanks,
Razi

Here are the answers to the questions:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
A: Not necessairily. The query is there to help you gather the relevant data but this is a functional exercise. If a HR Functional person on your team can identify the relevant domains, events, etc, then you can populate it manually. The goal is to get the relevant EBS domain values and map to the BI requirements. The query is a fast way to get the list of the existing values from the EBS DB.
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
A: If the COnfig Guide specifically has a section for R12 versus 11..then you need to follow for the version you are on. However, there are general "EBS" configurations that you need to do for both versions. Rule of thumb, if it doesnt specific the version, then it needs to be done for both.
If helpful, pls mark correct or helpful

Laptop configuration for OBI EE.

Similar Messages

Maybe you are looking for