Laptop Crash when iPhone 3Gs is connected

Hi everyone,
I have a problem as per above..Details as per below:
1. When i first connect my laptop and iPhone, it works well.. but soon after few days without any synchronizing(which means few days of iPhone usage) , my laptop immeadiately goes into blue screen when i connect my iPhone to my laptop. The same problem occur until i disconnect / pull the USB cable away.
2. Thinking that this might be one off kind of problem, i reconnect after few hours and same things happen.
3. I send my laptop for checking and format after that.
4. I went back to Maxis Malaysia ( authorized iPhone 3G dealer in Malaysia ) to check and apparently all iPhone belongs to the tech guy cannot connect to this laptop. I was advised to check my drivers etc.
5. Drivers all checked and updated.
6. iPhone restored to factory setting via iTunes.
7. Voila, i can connect my iPhone and laptop after that.
8. 3 days into the-newly-restored-iPhone, the same problem occured again..
9. i have already disable my webcam and removed the software needed to use the webcam as i read it in forum but yet, same problem happen..
Seriously, this has been getting on my nerve and i need advise from fellow iPhone users.. I'm not too expert on those tech / IT stuffs .. I only know basic .. Would be great if someone can help me through this.
Merry Christmas and Happy New Year....
Thanks and Cheers,
Wilson Cheah
Malaysia.

Hi, I have this problem with certain model of Acer Notebook.
The cause is due to the camera drivers conflict between iphone and the one install on the PC.
to resolve there are 2 ways
1) remove the camera drivers from the PC
2) empty your camera roll in your iphone.
Hope this helps.
ahdoi

Similar Messages

  • Fcpx 10.1.4 crashes when iPhone 4s is connected to iMac

    When I connect my iPhone 4S running the latest iOS 8.3 is connected to my 2014 iMac 27 running Yosemite 10.10.2 Final Cut Pro X 10.1.4 crashes. If I do successfully connect the phone, FCPX crashes when I attempt to import video from the iPhone. I have never successfully imported anything from my iPhone to FCPX. It's kind of a drag to shut down FCPX to import or download video direct to the iMac HDD and then import to FCPX, but it does work. Any suggestions?

    I still have the trial 10.0.3 download, but unforunately can't run it because it's expired.
    There's another guy here that seems to be having similar issues importing AVCHD (same as my GH2).
    https://discussions.apple.com/message/18147371#18147371
    I removed the problem media and was able to continue for awhile without it on my macbook air while I was away.  Now that I'm back home on my 2009 era mac mini I have since imported more footage and encoutering the same thing on this system (also, unfortunately updated to 10.0.4).  It was at a point where it'd crash everytime it opened.  After a few times it wouldn't crash on opening, but I found that if I scrolled up through the clips in the event viewer, as soon as one particular one started to appear it would crash.  The problem clips seem to probably be higher bit rate because they have more motion like steadicam or slider in front of moving trees.
    There's stuff related to AVCHD in my crash reports.  I looked inside the app package and saw this file.  I compared it to the files inside the package from the trial and it's definately been updated.  I haven't experimented yet, but I thought about trying to copy the old AVCHD plugin to the new version and see if it can handle my footage better, but I don't know what else breaks if it's expecting access to new features or something.
    0x11a9f0000 -   
    0x11ac87fef  com.apple.AVCHDPlugin (2.0.0 - 1014.5.29) <02B6EE1F-C8BA-EB46-14BE-17330045B3C8> /Applications/Final Cut Pro.app/Contents/PlugIns/RADPlugins/AVCHD.RADPlug/Contents/MacOS/AVCHD
    I've got several saved, I can post the full thing, but I know nobody likes scrolling through it all.

  • ITunes 10.3.1(55) on Mac showing 42408 error when iPhone 3GS is connected for syncing

    I am trying to connect my iPhone 3GS to iTunes 10.3.1(55) on a Macbook pro but I am seeing the error "42408" and I am being asked to restore my iphone to factory settings.
    Please help as I don't want to undergo the risk of losing all my data.
    Thanks.

    teefster,
    not sure this helps; but, I've found that if the remote app doesn't connect I close it out (double pressing the home button and 'sliding up' the remote app (ios7)) Then when I restart the remote app - it seems to connect.
    Same behavoir now on my iPad since I've update the remote app. Ironically itunes recognizes the ipad WITHOUT having to 'p'air it'! My iphone 5S must be paired to itunes =:0
    now that all our iphones are on the most current version of ios7 and have the most current version of the remote app - the connect to itunes is now glitchy; but, still usable with the aforementioned work around. Ironcially, when either the ios7 OR the remote we just the most previous version they seemed to connect to my itunes without issue.
    BTW - see this thread for help on down reving your remote app:
    https://discussions.apple.com/message/23946928#23946928
    Agreed Apple seems a little remiss in the supporting the backward compatibilty of the app.
    thanks for taking the time to reply!

  • When iPhone 3GS is connected iTunes doesn't launch

    Updated to iTunes 9, updated iPhone to 3.1. When iPhone gets connected iTunes doesn't launch automatically. I should add though, that my ipod shuffle when connected does auto launch iTunes.

    Here's what I did: uncheck "disable autosync for ipod and iphones" in itunes/settings. Then connect your phone, go to summary pane and choose "sync when this phone is connected". Go back to itunes/settings and select "disable autosync..." again. Check the summary pane again, autosync should be garyed out again. Close itunes, disconnect the phone. Connect again and itunes should auto launch without starting to sync.
    Message was edited by: Ingo2711

  • I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

    I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Hope that helps,
    Griff W.

  • I want to back up an Iphone 3G and put all the content into Iphone 4. When Iphone 4 is connected to Itunes I do not get an Option to restore from Iphone 3G. IOS 3G - 4.2.1

    I want to back up an Iphone 3G and put all the content into Iphone 4. After I have backed up the Ipone 3G and then when Iphone 4 is connected to Itunes I do not get an Option to restore back up from Iphone 3G. The only devive is see in the drop down list is my Iphone 4. The IOS on Iphone 3G is 4.2.1 and on Iphone 4 is 4.1.
    Please share if anyone has any solution to such a problem.

    You will first have to update your iPhone 4 in order to restore it from the backup of your 3G. Follow the directions here:
    http://support.apple.com/kb/HT4972
    This is an erase/restore deal, so make sure all of your data is on your computer before you begin. iOS 6.1.2 will be installed on your iPhone 4.
    Once done, on your iPhone 4: Settings>General>Reset>Erase All Content & Settings. You'll now be able to restore your 3G backup to your iPhone 4.

  • HT201263 iphone 3gs not connect to pc!!

    help me!! iphone 3gs not connect to pc!!

    Do you have the latest version of "iTunes for Windows" installed on the PC?
    Hope this helps

  • I have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

    i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

    YOu'll have to restore, nothing else you can do.
    If you have an older backup you can restore to that.

  • TS1398 cant get ipod or iphone 3gs to connect to new router.

    Have had a new router, and I cant get ipod or iphone 3gs to connect to it.

    Does the iPod see the network?
    Do you get an error message?
    Does it connect to other networks?
    Have you tried:
    - Resetting the iPod, Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Powering off and gthen back on your router
    - Reseting network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • PC crashes when Iphone connected

    Hello
    For some time now, every time I plug my iphone into my laptop it causes a system crash. I've installed latest version of iTunes. It worked all fine when I first had my iphone and works fine when I plug my iphone into my work computer. But everytime into my laptop, crash. It is very very frustrating. I've tried plugging it in when off, plugging it in when on, makes no difference. As soon as it starts my iphone in itunes it crashes. What's causing this problem?
    Thanks

    I had a similar problem - my iphone synced fine at first then started crashing the PC after a few days. After reading the reply above - good call Lawrence - I deleted the few photos I had taken on the camera roll and it works fine again. I still need to find which drivers to update but at least I can do everything now except use the camera. Thanks

  • Laptop crashes when installing iTunes 10.7

    Hi
    I've been trying to update to iTunes 10.7 for ages now, but whenever it's installing my laptop crashes and goes to blue screen.
    I'm running Windows Vista Basic 32-bit.
    Anyone had that problem and knows what to do?
    It really bugs me as I cannot connect my iPhone anymore.
    Thanks!

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • System crashes when iPhone tethered for internet (2011 i7 2.3Ghz)

    Hi,
    Just wondering if anyone else has stumbled across this issue..
    My MacBook Pro 15" 2.3Ghz i7 gives me constant grief when connected by cable to my iPhone 3GS for internet tethering.
    Whenever it is connected in this way, it will run for anywhere between 3-10 minutes before coming to an abrupt halt with the multi-language "You need to restart your computer. Hold down the power button until it turns off, then press the power button again" message. Every time I submit a report upon reboot but it still keeps occuring.
    I was hoping it would get fixed on the last system update, but it's just happened to me two nights running repeatedly. As a result, after 3 repeat issues on both nights I resorted to booting into my BootCamp Windows 7 partition and tethered via the iPhone there and all was fine (except for being stuck using windows again...)
    I'm now back home and using my regular wifi internet connection and everything is just as it should be again in OS X.
    Any clues as to what I could do to remedy the tethering/crashing issue?
    Cheers!

    I am having the same exact same issue with my 3GS being tethered to my brand new macbook pro. No issues on wifi. It's really furstrating. Any clue how to resolve this?

  • I have iphone 3gs, while connecting, it shows sync in progress, then in my pc shows backing up step 1,2,..5, then message comes itunes stopped working-windows checking for solution. Then another message comes that "A problem caused the program to stop wor

    When i connect my iphone 3GS to my PC, while syncing in progress, pc shows backing up, preparing to sync. Then message display "itunes stopped working",
    windows checking for solution, Then message comes "A problem caused the program to stop working correct. Windows will close the program and notify you if solution is available" , Then Itunes go off. I have tried agains installing Itunes etc no use. I am not a computer literate, help me to resolve this, Thanks

    I have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
    You can't "copy" your photos to the "library manager", there is just no way to any such thing.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Computer shuts down when iPhone 3gs is conected

    I have an Acer Asire 5600 lap top, about 3 years old and when i attach my new iphone 3gs the computer shuts down and restarts. If I dont unplug the iphone the computer keeps shutting down and restarting.
    Any ideas
    Thanks
    Craig

    I had this problem for several months and recently solved it.
    You will need to download the following complete software and install it:
    AcerOrbicam (logitech).zip must be version 10.4.0.1319
    make sure to disable any antivirus program before the installation.
    make sure to unplug your network connection to avoid any virus attack whenever you disable your antivirus software. restart after installation. takes 4 steps.
    windows xp, running latest itunes 9.2. plug iphone after restart. it should work!!

  • IPhone 3GS cannot connect to iTunes app

    I got the Mountain Lion installed on my MacBook and now I cannot connect my iPhone 3GS to it, and when I try the iPad it does not work either... I tried to reset the settings on the phone, but since the iCloud was acting very weird I never used it properly and the wire connection does not work - therefore I cannot use my phone now. Can you please help me somehow??
    Thank you!

    Check the iPhone discussion and you will find dizens of identical posts to this. The most common suggestions are
    Reaset the date
    Settings > General > Date & Time
    Turn "Set Automatically" OFF
    Set Date & Time to the year 2013
    Relaunch Passbook
    When you have done this and downloaded the apps to back to Settings > General > Date & Time > Set Automatically to ON.
    Try using Cellular connection
    Settings > General > Cellular
    Use Cellular Data for... iTunes ON
    Use Cellular Data for.. Passbook Updates ON
    Wait until Apple gets things sorted out on the App Store or the unexpectedly heavy load abates
    Neither of the first two options worked for me so I am waiting somewhat impatiently for Apple to sort it out.

Maybe you are looking for