Laptop does not detect the new HDD

Good afternoon ladies and gentlemen Gameday! I need help.
On my laptop broke down the hard drive. According to reports, a lot of bad sectors, SMART. Decided to put a new HDD. Laptop does not see the new hard drive. In the BOOT MENU new hard drive is not detected.
Old hard drive while still runs in the BOOT menu displays all 3 sections. On the new disk interface is similar to the interface connection on the old disk.
laptop model: 15-e 051 sr.
OS: Win 8
manufacturer of the old hard drive : Hitachi
new hard drive: seagate.
New hard drive on another system checked for operability.
Also, the laptop refused to work with other hard drives: Samsung, Hitachi.
I am sorry for your Books English. For transfers using Google translator.
I look forward to qualified support, despite the language barrier.
Sincerely Sqwosh.

Hi @sqwosh ,
Thank you for your query, I will do my utmost to assist you.
First I would like to let you know that the broken English is not a problem.  I understand that Google translation can be a a little rough in the translations.  We  will work together and I am  sure we will do fine!
I grasp that you are trying to replace the hard drive but it is not being recognized in the bios.
Here is a link to the HP Pavilion 15 Notebook PC Maintenance and Service Guide. please note page 57 for a list of supported hard drives.  It will also provide information on removal and replacement of the hard drive.
You could also try this.
Once you have the hard installed and connected and you are at the bios screen, you will notice an option to restore defaults along the bottom. ( I believe it is F5) .  This will cause it to scan for the hardware and hopefully find your new hard drive.
Please do not hesitate to respond if you require further assistance and good luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • When i connect my philips 170c monitor to my macbook pro 13" early 2011, it does not detect the second monitor?

    help! i've googled around, but none seems to solve my problem
    my macbook pro is early 2011, 13", running lion.
    the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
    the screen on my mbp does turn blue, but no input is detected on the external monitor.
    any advice?

    If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

  • I have just bought an iPod Nano to replace my previous one which died,when I open my iTunes it does not show the new iPod, and refuses to allow me to sync my existing library, the new iPod does not show in my computer only on devices, any suggestions ?

    Question: I have just bought an iPod Nano to replace my previous one which "died" My computer does not recognize the new iPod and only shows it in devices and printers. I cannot sync my existing iTunes to the new iPod, there is no way I can do it. Any help please?

    Hey there longislandmacca,
    It sounds like your iPod is not recognized in either Explorer, or in iTunes on your PC. That can be frustrating, expecially when its a new device. I recommend you use the following article to help resolve that issue named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Have a mac mini. Just got a external HD. I want to store my itunes media on my external HD and play back on Windows XP laptop. My laptop does not recognize the HD. Only recognizes the empty partition I created on my mac when I partition the drive. What's

    I have a mac mini-snow leopard. I recently bought an external HD. I want to use part of the HD to back up my mac via Time Machine. The other part I want to use to store my Itunes and other media such as movies with VLC so that I can take the HD and play it back thru my windows XP laptop. The problem is that my laptop does not see the part of the external drive that has my mac info stored on it. Only sees the drive ( as drive E ) with zero data that was created by me when I partitioned it on my mac. I partitioned the drive in two. One partitioned under GUID for mac. The other part under exfat for windows. Any suggestions on why my XP laptop cannot view the mac info on the HD. Thanks.

    DBG413 wrote:
    Any suggestions on why my XP laptop cannot view the mac info on the HD. 
    you'll have to install e.g. MacDrive or HFS+ for Windows on your winsloth machine.

  • How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

    I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

    You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
    Format the drive info here.
    Backup and restore info
    https://discussions.apple.com/message/16276201#16276201

  • When I open iWeb it does not "Highlight" the New site or new page options. It ahs had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    When I open iWeb it does not "Highlight" the New site or new page options. It has had this issue for over a year! I have tried uninstalling and re-installing it. What do I do? It opens the tutorial video, then when you close it, nothing else is clickable.

    Open iPhoto, select a couple of photos and use the Share ➙ iWeb ➙ Photo page menu option.  That has jump started iWeb for others.  I could take a couple of tries.
    If that doesn't work try the following:
    1 - delete the iWeb preference file, com.apple.iiWeb.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iWeb folder. 
    Click to view full size
    3 - launch iWeb and try again.
    OT

  • Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery

    Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery

    Yes, it says no battery installed. The battery icon with an X and system profiler saying no batter installed.
    Tried the SMC Reset - didn't work!

  • Captivate 3 does not detect the micro

    Dear Users!
    I have a lot of problems, using captivate 3 on my vista
    installation. actually, the program does not detect the microphone.
    i am using this micro in other applications without any problems. i
    read this problem also exist in older versions of captivate. i am
    using realtech audio hardware. i found a patch for captivate 2 that
    does not work on captivate 3, but i found no pathch for captivate
    3.
    greetings from germany
    Rene Rose

    Hi Rene
    It should be logical to assume that any patch that corrected
    issues with version 2 would be automatically incorporated in
    Captivate 3.
    To my knowledge, your situation is one I've not seen or heard
    of in Captivate 3. So I suspect possibly a mix of hardware that we
    haven't seen before.
    I would highly suggest you report this to Adobe as a
    potential bug. Please provide them as much detail as you can. You
    do this using the Wish Form.
    Click
    here to view the WishForm/Bug Reporting Form
    Cheers... Rick

  • My iMac does not see the new Toshiba external drive in Finder or Disk Utility.  How can I get it to see the drive?

    My iMac does not see the new Toshiba external drive in Finder or Disk Utility.  How can I get it to see the drive?

    From the menu bar, select
               ▹ System Preferences ▹ Energy Saver ▹ Power Adapter  
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
    Start up in Safe Mode and test.
    Reset the NVRAM.
    Reset the System Management Controller.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

  • TS2776 I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it.

    I recently bought iPad 3 but iTunes on my Win XP laptop is not detecting the iPad and i am not able to transfer music to it. I tried again after downloading iTunes 10.6.1.7 and it said it's not compatible with the XP version.

    I would recommend you try downloading iTunes for Windows 10.6.1 from this website for your XP based computer:
         http://www.techspot.com/downloads/70-apple-itunes-for-windows.html
    Hope this helps

  • I upgrade from LR3 to LR5 and the basic panel is the old format...does not have the new sliders that

    and the basic panel is the old format...does not have the new sliders that were introduced in LR 4. Using Windows 7 if that matters.
    still seeing fill light and recovery instead of shadows and highlights
    thanks
    jp

    You have to change the photo to Process Version 2012.
    Under the histogram in the develop module is a Lightning Bolt icon. Click on it.

  • I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  Thi

    I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  This is a big problem.  I must be able to save on the newer computer.  Do I need to buy a new computer with a more up-to-date OS?  Please help.

    Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

  • Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?

    Hi, I have Lightroom 4, but it does not support the new 10-30 pd lens for my Nikon 1. It is supported in LR5. Can I download this lens profile and install in LR4?

    Do you have the latest camera raw installed for Photoshop? If so, you can find the profiles in /Library/Application\ Support/Adobe/CameraRaw/LensProfiles/1.0/Nikon/ . Lightroom should recognize them if you move them into your home directory's Library folder in the exact same folder structure (but in the Library folder in your home directory). This is assuming you are using Mac OS X. No clue where these files would be on Windows. If you don't have Photoshop, you can install Camera Raw using the combined installer with DNG converter which is a free download from Adobe. This should (I think) give you the profiles in that exact location without owning Photoshop.

  • I installed the new version of LIghtroom (2015) from Creative Cloud.  Creative Cloud says I successfully installed the new version.  However, the shortcut icon that was installed does not start the new version.  I've also gone to the properties link itsel

    I installed the new version of LIghtroom (2015) from Creative Cloud.  Creative Cloud says I successfully installed the new version.  However, the shortcut icon that was installed does not start the new version.  I've also gone to the properties link itself but, no success in starting.  How do I launch the new version?

    Thank you, toinimj59.  I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
    Solution 1: Sign out from Creative Cloud desktop app and sign back in
    Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
    Launch Lightroom.

  • I changed my apple id on my computer and my iPad does not recognize the new id

    I changed my Apple id on my computer and my ipad does not recognize the new id and continues to display the old id. How can I get it to change to the new id?

    Easy Fix: On your iPad, go into Settings>Mail,Contacts,Calendars and click on your hotmail account. Simply replace the password that's already there with your new one. Then, I recommend rebooting your iPad:
    To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
    If you've already tried this, then the next step would be to delet your hotmail account from your iPad (also in Settings>Mail, Contacts, Calendars) and then reboot the iPad and add the account back again.

Maybe you are looking for