Laptop (EliteBook 6930p) speakers stop playing when docked (HSTNN-IX01 PA286A)

This is very frustrating problem.
My laptop's (EliteBook 6930p) internal speakers play audio just fine but as soon as I place the laptop on the docking station (HSTNN-IX01 PA286A), speakers stop playing.
Audio output device stays the same as 'speakers' whether docked or not.
While docked, I can get audio out through line out on the laptop as well as the line out on the docking station.
But the built-in speakers just will not play while docked.
Sound is not mutted, volume level is not hear 0%, it just stops playing when docked.
I've tried, reinstalling audio drivers as administrator under freshly installed Vista and Windows 7.
Same behavior is observed under the two different OS's I've tried.
Is it just not possible to get audio out of the built-in speakers when docked to this docking station?
Is there anyone who can confirm built-in speakers working whiled docked to this particular docking station?

Hello vlsi2000,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Thank you
I worked on behalf of HP.

Similar Messages

  • My itunes music stops playing when my laptop screen closes down after about 5 min. im using windows7

    my itunes music stops playing when my laptop screen closes off after about 5minutes. im using windows7

    DriveReadySeekComplete errors are either:
    - IDE controler failure
    - Bad cables
    - Bad harddisk
    Out of these 3, the last one sounds the most reasonable with nowadays harddrives. And yes, your system will hang when all your important processes are hanging while trying to do disk I/O.
    What windows does is switching back to PIO mode and never report anything, until you hit the nice BSOD telling you to replace the floppydisk in drive C...

  • Ipod classic wont play when docked

    i have a recently refurbed/replaced ipod classic thats was replaced by Apple when the battery went capput
    i have since bought a dock which is compatible with classics
    this dock will play my wifes ipod nano and her iphone 3GS
    but will not play my ipod classic 160
    it is on firmware 2.0.4 and itunes says is upto date
    I have tried resetting ipod
    I have turned dock on and off
    I have restored my ipod and reinstalled all my files
    i have contacted the dock manufacturer and state it is not their fault
    how do i get this to work ?
    I have since tried it on another dock on my DAB radio and wasnt recognised on that either

    Wow, ive been having the same problem for a month now. It the car the music started flickering or whatever, then all of a sudden audio completely stopped from the ipod. Doesnt work with any type of speakers through the headphone jack and it doesnt play when docked on a ihome. It will still hold music, it looks like it playing because the time continues and the blue bar moves, but no audio.

  • Helix keyboard stops working when dock battery reaches 3%

    My other post has more details but the title says it all. My Helix keyboard stops working when dock battery reaches 3% even though the tablet battery has a charge. This seems to happen every time. A hard reset of the dock gets the keyboard working again. Any ideas on how to fix this?

    This is my daughter's college computer so I have not used it. I just get the panic call when it locks up.
    Is there any way to get a warning when the battery is low? I assume that it has a light on the base but I can see how she could miss it when focused on what she is doing. I am not sure it comes on since the tablet battery still has capacity. I find it odd that this happens when the tablet battery still has a decent amount of charge. Effectively it eliminates a fair amount of the battery capacity available for the computer.
    I have other electronics that force you to shut done at low battery levels. I am surprise that a high end laptop performs this way.

  • IPod no longer stops playing when a podcasts ends

    Starting with iPod software 2.1 and iTunes 8.0, my iPod Touch 1st Gen. no longer stops playing when the end of a Podcast is reached. It will start playing the next Podcast episode in the list although that is an older podcast that I have already listened to.
    Prior to these software updates, I would be listening to, let's say, the MacCast podcast number 100, when it finished, the iPod would stop. I could then go up the list and play a newer episode or switch to a different podcast. However, now, once episode 100 finishes, the next episode down the list is number 99 and it starts playing automatically (even though I have already listened to it).
    Is there some new setting I am missing? Is anyone else having this problem?
    Regards,

    It's a new "feature" of the latest firmware upgrade.
    I personally hate it.
    Send Apple feedback here:
    http://www.apple.com/feedback/

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • External speakers stopped working when Yosemiti was down loaded

    My external speakers stopped working when I downloaded Yosemiti! how can I remedy this?

    Dunno what it has to do with Yosemite, but:  press the alt/option key, while clicking on the speaker icon at the right hand top of your screen. This will show you all the sound inputs and outputs for your mac. Ensure that it is set to "Line Out" or "Digital out" (depending on your speaker's capabilities. Hopefully
    that works
    John B

  • Speakers only play when headphones are plugged in.

    My internal speakers only play when the headphones are plugged in. (System preferences-Sound tells me I'm using Internal Speakers, audio port for sound input).  When I remove the headphones, the red light in the jack goes on and the computer says I'm using Digital Out ("The selected device has no output controls.)
    I have read many community responses, most saying that the switch inside the headphone jack hasn't engaged, that I should fiddle with it using a paperclip/bobbypin/toothpick or just plug-in and unplug headphones repeatedly.  I have repeatedly both of these to no avail.  When fiddling, I don't really know which bump inside there is the switch, I've played with them all. 
    No, it's not dirty, I've blowin air, vaccuumed, dusted. Same problem.
    I do use my speakers often for work and pleasure, go between different external speakers and a projector.
    It seems that the computer has things backwards- headphones unplugged is pluged and vice versa.
    Any suggestions or clear guidance as to what I should be fiddling with when I stick a bobby pin in there?  No need to refer me to old posts, I've read them.
    Thanks in advance,
    TheKip

    If your phone is still under warranty, Apple will service your phone for free.
    Did you check the headphone port for any kind of debris or lint?
    Did you already try another set of headphones? Are you suing the headphones that came with the phone?
    Is the headphone jack plugged in fully into the headphone port?

  • Why does pandora stop playing when i unlock my phone

    Why does pandora stop playing when i unlock my phone?

    Hello wayne1722
    If you are having issues with the Pandora app, check out the article for troubleshooting the issue.
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT4211 why youtube stops playing when you want to see your facebook status

    i am a new user of iphone , i want to know why does youtube stops playing when you switch to another app, why cant it continue playing while we check someother app.

    Probably because Google did not program it to keep running in the background.
    Its up to the App developer to provide this functionality.

  • Sounds stop playing when user locks screen on iOS with AIR 3.9 Beta

    We built a simple application that should play sounds when in background and when the screen is locked.
    Since we updated to the latest AIR 3.9 Beta SDK, all sounds stop playing when the user locks the screen on iOS.
    The sounds resume when the screen is unlocked.
    - it works on Android
    - we use renderMode : cpu
    - we use UIBackgroundModes : audio
    - we use NativeApplication.nativeApplication.systemIdleMode=SystemIdleMode.KEEP_AWAKE;
    - sounds play when the app is in background
    - was working great with AIR 3.8 SDK
    Any help would be greatly appreciated.
    Thanks!

    Thanks for reproting the issue, we have an internal already logged bug for this, which is under investigation at the moment.
    -Nimit

  • TS3700 music stops playing when the screen goes dark, but the earbud jack is flush with the iPod. The Jack is hard to push in now. what is the problem?

    Music stops playing when the screen goes dark; the earbud jack is flush with the iPod. The Jack is hard to push in. what is the problem? How do I Fix it?

    And you are positive the white part of the headset is flush with the body of the Nano?
    Have you tried another set of headphones to see if the problem persisted? If so, it's likely that the headphone jack needs replacing.
    B-rock

  • When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

    My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.  First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

    You may want to do a Restore on the shuffle in iTunes.  The Restore button is on the shuffle's Summary screen in iTunes.  This will erase the shuffle, re-install its software, and set it to default settings.  If it's a software or data corruption glitch, the Restore should fix it.  After the Restore, reload or resync your songs, and try it again.  As a test, you may want to initially select a small number of songs to put back on the shuffle.

  • Why does my music stop playing when I sleep my screen?

    Why do songs stop playing when I sleep my screen? If my screen automatically sleeps after two minutes or I sleep it with the button or iPad smart cover the music stops playing. It only started doing this after upgrading to 5.0.1. Is this just a bug with the new software?

    Thanks Rachel, I have done that and it seemed to have taken care of the problem, though my music videos in "Video" stop playing when my iPad sleeps automatically after two minutes... I am trying to find out how to contact apple about these issues directly...

  • Music does not stop playing when I disconnect from USB in car

    When iphone is connected to car stereo, music does not stop playing when I disconnect the usb cable. If someone is calling me and I unplug from USB, all I hear in my ear is music...I cannot hear the person calling me. Not sure what's happened but it never used to do this. Any suggestions?

    Nseries phones have behaved this way since forever.
    I don't know any way to change this. Same behavior happens if you unplug your headset or headphones.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

Maybe you are looking for

  • Tax Code V0 Country IN does not exist in procedure ZTAXIN

    Hi all, While doing IV in Import Purchase scenario, while simulating, i 'm getting the following error. Tax Code V0 Country IN does not exist in procedure ZTAXIN. Can someone help me on this. Thanks AG..

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts, Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears. As the volume of data in the cube is very high, and s

  • Accounting document relationship to find intermediate document in FI-SL

    Hi all, I'm working in FI-SL and specially, on Drill-down from FI-SL document. My customer has a distributed system by ALE transfer with many other SAP Sytem. But I have one problem, when I try to drill-down these documents created by ALE, I have an

  • Can't open certain files

    I've recently begun having problems opening some files and am wondering if anyone has any ideas. I'm trying to open music XML files in either Sibelius 5 or Finale 2009. Up until a few weeks ago I was able to do so in both programs without problem, bu

  • E540: Not powering up

    Few months old E540 is not powering up. When I press the power button, the led is lit and the fan turned on but nothing else happens. Nothing on screen and can't even open the DVD tray. Have tried fn+F8, removing battery without luck. Haven't done an