Laptop Enter Your Administra​​tor Password or Power on Password

My laptop is asking me to Enter Your Administra​tor Password or Power on Password. System Disabled 51249212. Can you help me?

Mrico.
Use that code to go into the BIOS.
Disable all passwords that are enabled.
If asked for the CURRENT password use that code.
If asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

  • Laptop Enter Your Administrator Password or Power on Password

    Hello, I have a problem with a Pavilion dv6. I never put a administrator password on power up but the notebook stuck on a blue dialog box " Enter the administrator Password", i try a lot of numbers  but the screen return 58670714 number on a few times. 
    How can i solve that problem ?
    Thanks for all.

    Hi, Please try:    47758330 Regards.

  • Enter Administra​tor Pass or Power On Password

    System disabled and the code on the screen is 85336401.  Thanks for anyone who can help.

    solved thank you

  • Enter administrator password or power on password for "System Disabled 94238025"

    I get the message, "Enter administrator password or Power on Password" when I open my laptop. What code do I enter in my HP 2000 when I receive the message "System Disabled 94238025". I appreciate any help you can give me!

    Hi: Please read the first post at the link below which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Administra​tor password or power on password

    when I turn my computer onI get a black screen with a blue box that says enter administrator password or power on password how can I get past this because I've forgotten my passwordplease help me after 3 tries I get the code 758 98382
    This question was solved.
    View Solution.

    Kat try.
    60790904
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • I disabled disc c on my hp laptop it has administration password or power on password

    I'm locked out my laptop i was trying. To fix disc c and messed up everything now it requesting administration password or power on password after so many tries system disabled and 781384447 pops up

    Ms try.
    67890489
    REO
    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • HP enter administrator password on power on password

    Hi All, Please help me with my problem...HP enter administrator password on power on password....  System Disabled : 92961174 Thank you in advance. maersk

    You're welcome  All the best, DP-K

  • Enter administration password or power on password

    Upon start up it says
    Enter administration password or power on password
    Then after 3 failed attempts
    It says system disabled
    [ 50790401 ]

    Hi, Please try:    45698427 Regards.

  • Administrative password or power on password

    My laptop is Asking for administrative password or power up password, I've never come across this before. After third password attempt it gave me the code 69131912. I'm at a loss, please help.
    Thank you

    Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​stems-and-Sof​... Then... You can: 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Master code for administrator password or power on password for HP Pavilion m6

    my HP Pavilion m6 you turn on just says administrator password or power on password
    I have never set one is password is there a master reset code

     Enter   75790504 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

  • Administrator password or power on password

    Administrator password or power on password. 3 wrong tries and system disable 68037021 pops up....help please

    Hi,             Use the below code for the reset  77995007 or generate one from the below link using the System Disable code http://bios-pw.org/ Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes.

  • Enter Admin Password or Power On password. The System Disable number is [ 59568624 ]

    3) Enter Admin Password or Power On password. The System Disable number is 59568624

    Please enter : 46440200 Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold  down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • HP home premium laptop administer password or power on password

    Turn on computer and the following is displayed- Enter Administrator Password or Power on Password?  How do I recover if I do not have either of these?

     When asked for the password just hit enter 3 times. Post any halt code. REO

  • Administra​tion Password or Power On Password..​..

    I am having a problem with my compter. It says: Enter Administration Password or Power on Password.
    Every 3 failed passwords, it says: System Disabled [59343116]
    I have a Compaq Presario CQ57 Windows 7
    if anyone could help me, I'd be pleased.
    Thank you so much.

    Please enter = 41621209
    Regards,
    KNRK
    I work for HP

  • Enter your Single Sign-On user name and password to sign in

    Hi,
    Could anybody tell me the user and password by default for administering SSO ? I think the user is orasso but I am not sure ...
    From:
    http://localhost:7777/pls/orasso/orasso.home
    I click on Login
    And here I get the message: Enter your Single Sign-On user name and password to sign in
    Here I have to use the user/password I don't know :(
    Thanks for your help,
    Paul

    You also may want to look at DAS to manage the users of your applications:
    http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14086/toc.htm

Maybe you are looking for

  • A problem about Simple RFC Server

    I'm developing a Simple RFC Server by SAP dotNet Connnector. As a necessary step, I create a TCP/IP destination on R/3 system, however I meet some problem in this step as following:    There is a console exe file as Simple RFC server run on the windo

  • Invalid SQL generated for count query.

    A SQL statement was generated with the table name information missing when a count SQL query was issued (e.g. SELECT COUNT(*) FROM WHERE <SOME EXPRESSION>). The same query worked fine before switching to vertical class mapping. Basically no queries w

  • Skinning combobox rectBorder class... only!

    preface: I have experience skinning components. Issue: trying to change the rectBorder class ONLY on the combobox instances. no others. can anyone help me with this? I've changed the rectBorder for entire documents before, but have never been able to

  • How to write export dump commad with no datable data only table structure.

    How to write export dump commad with no datable data only table structure will there and command for hole schma. e.g. export dump command for scott schema and all table within scott schema in it no table data should be exported.

  • Wrong Depreciation value for subsequent years for further acquisition

    Hi All, Need immediate help...I have a dep key with Unit of Produciton. The method being used is Usage/Remaining and the Base Value is 24 - Net Book Value. I had posted an acq. on 01.01.2009...it depreciates perfectly as per my usage--say till period