Laptop G470 has 0 Available (free) RAM memory

Greetings everyone,
I open another thread just for this subject...
I have a Lenovo laptop G470 with i3, win7 64 bits and 4GB ram
when i look on the task manager, this is what i see:
Total RAM: 4039 mb
Cache: 2732
Stand by: 2631
Available: 0
Appart from the fact that the total RAM is not equal to cache + stand by...
MY PROBLEM IS that the avilable memory is ZERO (0)
When it starts it has like 2000 MB on available ram, but as time goes by, it goes down to 0... system goes fast, but don't know if this is normal
THANK YOU VERY MUCH!!!
Neonet04

Similar Messages

Free RAM memory

Hi,
Is there any C function that returns the total RAM memory
and the free RAM memory in my CPU ?
How to use the function ?
Thanks,

The kstat(3KSTAT) interface has the information you are
looking for. Try running kstat at the command line and
in there you will find physmem and freemem under module:unix, class:pages.
Note that free memory pages on Solaris is not the most
useful statistic due to caching on the system.
There is some sample kstat code on access1.sun.com.

E52 has how much of RAM memory?

Dear All,
How much RAM memory in Nokia E52 mobile? I found just NAND memory as 256 MB in device details at nokia site. Can you tell me how much RAM capacity have this model?
Thanks & Regards,
Ashok.K

Hi there, your E52 has 128mb of RAM.

E72: Low free RAM is a HUGE HUGE HUGE BUG!

HI 2 everybody.
I bought an E72 some days ago, and I really suprised about the product quality. Of course, in this case "quality" means some things very good, and some things VERY bad. But the problem is, in this case, bad things.
WHY IN THE HELL E72 HAS SO LOW FREE RAM?
It's incredible, I remember N95-1. The main difference is N95-1 had 64MB, E72 doubles that! I cannot believe that after booting up, the phone left only 28MB out of 128! I cannot load 2 big programs simultaneously, because the OS crash at any moment because of low free memory. I never had this problem with my "oldie but goodie" E71. And I'm surprised that, after 2 firmware revisions, Nokia doesn't solve the problem! Why??? It's so difficult to unload many unused processes? Is so difficult to activate some type of virtual memory? AFAIK, N95-1had virtual memory. And, by the way: why E71 doesn't come with 192 or 256MB RAM???
Now, knowing the fact that Nokia doesn't want to solve this issue, well... Anyone has trying or tried to solve that? Any Symbian expert? Perhaps killing unused or annoying processes?
Thanks a lot.
Nokia: IT'S A SHAME!

To the OP, its not a bug, but a total failure of the development process. Its quite pathetic that even the E63 has 70MB free after startup while the E72 has only 40MB.
As soon as you load any WWW page the thing flunks.
So apart from using it as a tether device to my laptop the E72 is a failure as any sort of net enabled phone ... compared to my E63 (and yes I have both) its speed only helps you to hit dead ends faster

Free RAM on X6

This thread is just a log of amount of available free ram on the X6. Although there are many such threads for other devices, I couldn't find one for X6.
In my case:
After restart: 38-43
After hours of Heavy use: 24-37
I used handy taskman to keep tabs.
On some other threads I read people have posted that their n97s have upto 50mb free after a restart...and that has never happened with my X6. Maximum I ever had was 45mb.
Nokia X6 32Gb (comes with music)

Steve Litchfield from All About Symbian has written a very good article about free RAM in the last day or so...
http://www.allaboutsymbian.com/features/item/Ahead_of_and_behind_the_need_for_RAM.php
If you look at the graph he has produced the X6 would be slightly below the N97. In some ways I miss my N82. Nokia really just risk alienating their customers by scrimping on RAM on their handsets.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

I have only 200mb of free ram. i have 2gb installed. I have early 2008 2.4gh macbook running os x lion

I have an ealry 2008 macbook. it has 2.4gh processor and 2gb of ram. when i had snow leopard it ran like a champ. i installed lion and she still runs good but she suffers some lags. i checked the activity monitor nd it has 200mb of free ram left. to me thats a little bit. i like to play video games. when i had snow leopard i was able to play gta san andreas with no problem. so my question, is really bad 200mb? and will 4gb of ram improve the system?

Free ram isn't the on,y ram that's available to run programs http://support.apple.com/kb/HT1342
BUT.....2gb is the bare minimum for running Lion, you need at least 4gb in reality. Your computer will run better with 4gb.

How to reset it(free up memory)? [for 3110c]

I have such problem - 9mb is fully used by sms messages. I inserted 1gb micro sd card. but there is only 75kb of free space... How to delete every thing?? when I try to delete e.g. gallery or other files- phone "freezes"... how to reset it? [3110c nokia].
when I connect to PC - it does not connect via usb.
also when switching it ON - white screen opens.. long pause.. and then it goes normaly.also - it restarts sometimes.
Thank you.

main problem - "message storage memory not ready" - while trying to send sms.
also - while trying to take a photo - "memory is full" then it writes - "72.5kB memory available. free some memory?". I say yes - when "delete from" appears... messaging section is 3,8mb size. when i try to access/delete it - phone freezes.... so???
when i try to delete "contats" in my phone - it tries to do it.. but after long long loading ir restarts...
how did i got this error? I connected nokia to PC via USB cable, then chosed "data storage device" mode. After I disconnected, I can't access any Message related functions anymore. It always displays an error "Message storage memory not ready". I tried restarting, restoring factory defaults, taking out the battery/SIM but nothing helped.
update firmware? i tried. but in 3rd step - while writing data to phone via usb - it "disconects".
yes, i can get it to service center - warranty is available [i used it only for ONE day]... but i want to solve this problem for my own
also - The format code is *#7370#. but it dont work on 3110c. any ideas?
...i think the phone memory is corrupted....
Message Edited by gedas on 30-Dec-2007 09:35 PM

N96 ram memory problem

hi, i have my n96 for two weeks now. i don't have any problems with nokia maps, the pc suite, music player... (i've heard many saying that they have these problems), my problem is with the ram memory. i usually have only 38.7 Mb of free ram memory, even if i don't have any programes running in the background (not that i know of - i removed all programes installed by me). i updated the soft, hard reset. still the same problem.

The same problem for me too !
After booting my N96 with Handy Taskman I can see that I have only 45 Mb free RAM and with 128 Mb RAM it's not normal !
I asked the question on-line to Nokia and they were not capable of giving me an answer!
EverBeFree

Hard disk has no more space available for application memory

I keep this getting this error after my applications freeze for several minutes.
"Your hard disk has no more space available for application memory."
I have 1 drive with 160 GB and 46 GB available. I'm pretty sure that's plenty of free space. And why does my memory need my drive? I've got 2.5 GB of memory. That should be plenty sufficient to run Safari without needing virtual memory.
Help!

Hello! OSX uses a virtual memory scheme and even though you have a lot of ram it still utilizes the paging file. Panther 10.3.9 and below runs maintenance routines very early in the morning to clear temp files and other stuff. If you don't normally leave it on 24/7 then you may need to consider a utility to clear the temp files and do the routine maintenance. Tiger 10.4+ runs these automatically. I suggest leaving it on all night for a day or so and then restarting and see if the problem clears up. Here's a list of utilities such as Macjanitor.Tom
Utilities

"Your Mac OS X startup disk has no more space available for application memory" error?

I've searched the web high and low to resolve this issue, tried many different approaches, and have not been able to resolve it. I'm really looking for help at this point.
I'm trying to export a 5 minute video that I've put together using FCPX 10.0.8. I export "master file" to an external hard drive and at some point in the export process I get the following popup:
System information:
13" mid-2011 Macbook Air
Processor 1.8 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3 (2GB x2)
Graphics Intel HD Graphics 3000 384 MB
Software Mac OS X Lion 10.7.5
Hard drive: 256 SSD (107 GB available)
FCPX project information:
FCPX media is stored on SSD system drive and exporting to external drive
Media is 1080p 24 frame footage shot using a Canon T2i
Total Length of project is 5:13
Background rendering is off
Proxy media is created for all media but I am exporting original media
I've tried the following:
Freeing up more hard drive space - I've anywhere from 25 GB to 107 GB free and it does not seem to matter how much free space I have, I still get the error
Repairing system drive - I've repaired permissions with Disk Utility and I've even performed a drive Rebuild using DiskWarrior
Cleaning up FCPX project - I've gone through and deleted all unused media, deleted project and event render files, etc
Cleared RAM - During export I've repeatedly ran MemoryKeeper to clear RAM and free up more memory
System restart before attempting the export and I also boot up holding 'shift' which blocks unnecessary background tasks, dropbox, etc from starting
Considerations/Observations:
I've exported longer and more complex projects using the same setup with no problem, also with less free disk space
I've never seen this error in any other situation
The error will pop up anywhere from the export being 35% to 98% completed
Activity Monitor during export:
The only processes that are taking up any considerable memory are FCPX and kernal_task
'% CPU' on FCPX jumps around from 60% or less to 250% or more
FCPX usually has 83 threads
'Real Memory' for FCPX can be anywhere from 300 MB to 2 GB
It seems that when the export is at about 25% or 30% that is when the computer starts slowing down, 'Free' system memory goes down to mere megabytes, and a ton of swapfiles start to generate in .../var/vm folder which will build up until I'm out of disk space
Sometimes the error will pop up even before I run out of disk space due to the swapfiles. Last time it came up when I still had 40 GB free
Screenshot of Activity Monitor 'System Memory' during a previous attempt to export, taken right as the error popped up:
Thanks in advance to anyone willing to help me figure this one out!

I've tried the following:
Freeing up more hard drive space - I've anywhere from 25 GB to 107 GB free and it does not seem to matter how much free space I have, I still get the error
Repairing system drive - I've repaired permissions with Disk Utility and I've even performed a drive Rebuild using DiskWarrior
Cleaning up FCPX project - I've gone through and deleted all unused media, deleted project and event render files, etc
Cleared RAM - During export I've repeatedly ran MemoryKeeper to clear RAM and free up more memory
System restart before attempting the export and I also boot up holding 'shift' which blocks unnecessary background tasks, dropbox, etc from starting
Activity Monitor during export:
The only processes that are taking up any considerable memory are FCPX and kernal_task
'% CPU' on FCPX jumps around from 60% or less to 250% or more
FCPX usually has 83 threads
'Real Memory' for FCPX can be anywhere from 300 MB to 2 GB
It seems that when the export is at about 25% or 30% that is when the computer starts slowing down, 'Free' system memory goes down to mere megabytes, and a ton of swapfiles start to generate in .../var/vm folder which will build up until I'm out of disk space
Sometimes the error will pop up even before I run out of disk space due to the swapfiles. Last time it came up when I still had 40 GB free
Like Russ said, your system specs are pretty marginal - especially the 4GB of RAM. As you are experiencing this sometimes gets rapidly depleted, so the system starts to use swap on the system drive - the internal SSD. You have written about freeing hard drive space - do you mean in the external? You really need room in the internal SSD: not for your export, but for system stuff like sleepimage, swap space etc. The error message is pretty clear: you reached a situation where there is not enough space in the SSD for your system to work properly.

How much free ram should be available?

The ram that is available is determined by the applications actively operating right? Therefore if I quit some applications the free space shown in "Activity Monitor" should increase right? But how about the inactive space; Shouldn't that be considered free space too? Please help I think I might need more ram memory. Thanks in advance.

Here's the rundown on memory usage (from the Help menu in Activity Monitor)
"Wired: Wired memory is information that can’t be cached to disk, so it must stay in RAM. The amount depends on what applications you are using.
Active: Active memory is currently in RAM and actively being used.
Inactive: Inactive memory is no longer being used and has been cached to disk. It will remain in RAM until another application needs the space. Leaving this information in RAM is to your advantage if you (or a client of your computer) come back to it later.
Used: Used memory is being used by a process and not immediately available.
Free: Free memory is not being used and is immediately available.
VM size: Virtual memory, or VM, is hard disk space that can be used as memory. VM size is the amount of disk space memory being used. Mac OS X can use more memory than the amount of physical RAM you have. A hard disk is much slower than RAM, so the virtual memory system must automatically distribute information between disk space and RAM for efficient performance.
Page ins/outs: The number of times Mac OS X has moved information between RAM and disk space."
The way I understand it is that as long as you have few or no Page Outs you are fine with the RAM you have. Also, as you can see, the Inactive Memory is available for use by other apps if necessary.
Hope this helps.
Rick

HT1270 My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?

My mid 2010 MacBook Pro has the maximum 8 GB memory cards installed. Can it be upgraded to 16 GB? Are there compatible 8 GB cards available?

I have a similar question.. 13" macbook pro, mid 2010- having problems with spinning beach ball.. like someone from Mars has taken over the computer..   - the specs are below..   would it help if I added more RAM?   If yes, any suggestions where/ what to buy? This only started after upgrade to Mountain Lion from SNL.
MacBook Pro 13 inch mid 2010
Model Identifier:    MacBookPro7,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.66 GHz
Number of Processors:    1
Total Number of Cores:    2
L2 Cache:    3 MB
Memory 4 GB 1067 MHz DDR3
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP71.0039.B0E
SMC Version (system):    1.62f7
Graphics NVIDIA GeForce 320M 256 MB
BANK 0/DIMM0:
Size:    2 GB
Type:    DDR3
Speed:    1067 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x484D54313235533654465238432D47372020
Serial Number:    0x27A0B2F9
BANK 1/DIMM0:
Size:    2 GB
Type:    DDR3
Speed:    1067 MHz
Status:    OK
Manufacturer:    0x80AD
Part Number:    0x484D54313235533654465238432D47372020
Serial Number:    0x2740B300

My MacBook Pro version 10.7.5 4GB (keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do

My MacBook Pro (version 10.7.5 4GB)keeps crashing with the error message 'Your MAC OSX start up disk has no more space available for application memory' - what do i do. I keep force quitting the applications and turning the computer off but it happens again after a while

Hhow much goal and free hard disk space is available? Sounds like you need to move some things off of that hard drive.

Error Message: Your mac osx startup disk has no more space available for application memory.

Hi everyone:
I have a 2010 27" imac. Dual Core i3, 3.2 GHz and 8GB of 1333MHz DDR3 RAM, and a 90% empty 500 GB Hard Drive. Running Snow Leopard 10.6.6
I have received a message intermittently since I got the iMac. The Force Quit menu comes up and says "Your mac osx startupdisk has no more space available for application memory". Sometimes there are a few applications open. Sometimes none. Whenever I look in the Activity Monitor Utility I see 2 or 3 gigs of RAM still available for use, and lots of hard drive space.
Im not sure why I'm getting the message, nor what to do to rectify it. Quitting applications, like it suggests doesn't seem to help.
I am grateful for any advice.
Lauren

Hey Lauren.
First of all you do have some software updates you should be doing. 10.6.7 came out a few weeks ago. Sometimes doing all of your software updates resolve issues such as this.
To check for software updates click the Apple and then Software updates.
As this issue is someone broad, I would test one of the articles below to narrow down your issue.
http://support.apple.com/kb/HT1199?viewlocale=en_US
http://support.apple.com/kb/TS1388?viewlocale=en_US
Let me know if you need extra ideas.
Regards,
Britt.

What is available free memory in skeleton air application?

hi,
My pc has 12 gb.
I was developing full scale DESKTOP adobe air app and it started to crash on mousemove. So basically i wanted to see whats available free memory it was showing 50mb
that was too low for my app to process data.
So i went back and created simple HTML that shows available free memory...it shows 80mb free....whats going on?.
Anyone care to explain? FREE memory should be atleast 50% of allocated memory of processs assuming system uses 50%
Here is code and here is HTML
output
Memory-f-88-t-6452-p-30064
HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>PUSH PERFECT</title>
<meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1">
<script src="assets/js/frameworks/libs/air/AIRAliases.js"></script>
</head>
<body style="overflow:hidden;padding:5px;" id="MySplitter" >
                    <div class="span5 grider" style="text-align:left;">
                            <ul class="breadcrumb">
                            <li><a href="#">Calculation</a> <span class="divider"> </span></li>
                            <li><span >Memory</span>-f-<span id='freememory'></span>-t-<span id='totalmemory'></span>-p-<span id='privatememory'></span></li>
                            </ul>
                    </div>
<script>
function displaymemory()
var totalmemory=air.System.    totalMemoryNumber;
var freememory=air.System.freeMemory;
var privatememory=air.System.privateMemory;
document.getElementById("totalmemory").innerHTML=totalmemory/1024;
document.getElementById("freememory").innerHTML=freememory/1024;
document.getElementById("privatememory").innerHTML=privatememory/1024;
displaymemory();
air.System.gc();
displaymemory();
</script>
</body>
</html>
===================
Thanks in advance

Hot Cpu Tester can test every device in the pc .
Use it alot myself , assisting others with PC's and at work if there is problematic machines .
Given it thumbs -up in the past and in the present time .
http://7byte.com/index.php?page=hotcpu

Laptop G470 has 0 Available (free) RAM memory

Similar Messages

Maybe you are looking for