Laptop hard locking
I've just installed Archlinux on a brand new Dell Latitude E6520
This laptop has a nvidia quadro nvs 4200m and an intel card. I've disabled optimus in the bios and I'm using the nvidia binary drivers.
I've had a couple of hard locks, no response at all, I cannot switch to tty1 or anything else. This mostly happens after I've been seeing a flash movie.
EDIT: some more information. This is in Gnome Shell with Chromium. The problem seems to always occur on closing a tab with a youtube video in it.
It also seem like it's just the screen that locks (the mouse can be moved) and I could see a torrent updating on my android phone (transdroid - transmission)
Does anyone have an idea what could be wrong?
This is the output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012
[ 0.000000] Command line: root=/dev/sda6 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000091400 (usable)
[ 0.000000] BIOS-e820: 0000000000091400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf225000 (usable)
[ 0.000000] BIOS-e820: 00000000cf225000 - 00000000cf269000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf269000 - 00000000cf5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000cf5b7000 - 00000000cf5e7000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf5e7000 - 00000000cf7e7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf7e7000 - 00000000cf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 00000000ffc20000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022e000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Latitude E6520/0J4TFW, BIOS A08 10/18/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FE0000000 write-back
[ 0.000000] 5 base 220000000 mask FF0000000 write-back
[ 0.000000] 6 base 22E000000 mask FFE000000 uncachable
[ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f1a30] f1a30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000008c000] 8c000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf800000
[ 0.000000] 0000000000 - 00cf800000 page 2M
[ 0.000000] kernel direct mapping tables up to cf800000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022e000000
[ 0.000000] 0100000000 - 022e000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22e000000 @ cf5ad000-cf5b7000
[ 0.000000] RAMDISK: 37d7f000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000cf7fde18 00084 (v01 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cf787d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCF7E4E40/0x00000000CF7E4D40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000cf755018 08774 (v02 INT430 SYSFexxx 00001001 INTL 20090903)
[ 0.000000] ACPI: FACS 00000000cf7e4e40 00040
[ 0.000000] ACPI: APIC 00000000cf7fcf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: TCPA 00000000cf7e5d18 00032 (v02 00000000 00000000)
[ 0.000000] ACPI: SSDT 00000000cf788a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903)
[ 0.000000] ACPI: MCFG 00000000cf7e5c98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cf7e5c18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: BOOT 00000000cf7e5b98 00028 (v01 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000cf76c018 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903)
[ 0.000000] ACPI: SSDT 00000000cf76b018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903)
[ 0.000000] ACPI: DMAR 00000000cf7e4a18 000B0 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf775c18 00176 (v03 DELL CBX3 06222004 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000cf773018 014A0 (v01 NvdRef NvdTabl 00001000 INTL 20090903)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022e000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022e000000
[ 0.000000] NODE_DATA [000000022dffb000 - 000000022dffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022e000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000091
[ 0.000000] 0: 0x00000100 -> 0x000cf225
[ 0.000000] 0: 0x000cf269 -> 0x000cf5b7
[ 0.000000] 0: 0x000cf7ff -> 0x000cf800
[ 0.000000] 0: 0x00100000 -> 0x0022e000
[ 0.000000] On node 0 totalpages: 2086133
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3900 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 828852 pages, LIFO batch:31
[ 0.000000] Normal zone: 19328 pages used for memmap
[ 0.000000] Normal zone: 1217664 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf225000 - 00000000cf269000
[ 0.000000] PM: Registered nosave memory: 00000000cf5b7000 - 00000000cf5e7000
[ 0.000000] PM: Registered nosave memory: 00000000cf5e7000 - 00000000cf7e7000
[ 0.000000] PM: Registered nosave memory: 00000000cf7e7000 - 00000000cf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000cf800000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000
[ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cf800000 (gap: cf800000:2f51c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022dc00000 s82048 r8192 d24448 u131072
[ 0.000000] pcpu-alloc: s82048 r8192 d24448 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2050416
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda6 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8131928k/9142272k available (4279k kernel code, 797740k absent, 212604k reserved, 4601k data, 728k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2395.118 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4792.82 BogoMIPS (lpj=7983726)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000034] AppArmor: AppArmor disabled by boot time parameter
[ 0.000695] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002396] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003076] Mount-cache hash table entries: 256
[ 0.003181] Initializing cgroup subsys cpuacct
[ 0.003186] Initializing cgroup subsys memory
[ 0.003192] Initializing cgroup subsys devices
[ 0.003194] Initializing cgroup subsys freezer
[ 0.003195] Initializing cgroup subsys net_cls
[ 0.003197] Initializing cgroup subsys blkio
[ 0.003225] CPU: Physical Processor ID: 0
[ 0.003226] CPU: Processor Core ID: 0
[ 0.003230] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003231] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003234] mce: CPU supports 9 MCE banks
[ 0.003247] CPU0: Thermal monitoring enabled (TM1)
[ 0.003256] using mwait in idle threads.
[ 0.004417] ACPI: Core revision 20110623
[ 0.010455] ftrace: allocating 16773 entries in 66 pages
[ 0.016524] DMAR: Host address width 36
[ 0.016526] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.016534] IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.016536] DMAR: RMRR base: 0x000000cf5c6000 end: 0x000000cf5d5fff
[ 0.016607] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0
[ 0.016608] HPET id 0 under DRHD base 0xfed91000
[ 0.016609] HPET id 0 under DRHD base 0xfed91000
[ 0.016610] HPET id 0 under DRHD base 0xfed91000
[ 0.016611] HPET id 0 under DRHD base 0xfed91000
[ 0.016612] HPET id 0 under DRHD base 0xfed91000
[ 0.016614] HPET id 0 under DRHD base 0xfed91000
[ 0.016615] HPET id 0 under DRHD base 0xfed91000
[ 0.016616] HPET id 0 under DRHD base 0xfed91000
[ 0.016704] Enabled IRQ remapping in x2apic mode
[ 0.016705] Enabling x2apic
[ 0.016706] Enabled x2apic
[ 0.016711] Switched APIC routing to cluster x2apic.
[ 0.017136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050099] CPU0: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz stepping 07
[ 0.154389] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.154394] PEBS disabled due to CPU errata.
[ 0.154396] ... version: 3
[ 0.154397] ... bit width: 48
[ 0.154398] ... generic registers: 4
[ 0.154399] ... value mask: 0000ffffffffffff
[ 0.154401] ... max period: 000000007fffffff
[ 0.154402] ... fixed-purpose events: 3
[ 0.154403] ... event mask: 000000070000000f
[ 0.174525] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.201013] Booting Node 0, Processors #1
[ 0.201020] smpboot cpu 1: start_ip = 8c000
[ 0.314305] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.334169] #2
[ 0.334172] smpboot cpu 2: start_ip = 8c000
[ 0.447449] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.467295] #3
[ 0.467298] smpboot cpu 3: start_ip = 8c000
[ 0.580576] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.600430] #4
[ 0.600433] smpboot cpu 4: start_ip = 8c000
[ 0.713670] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.733570] #5
[ 0.733574] smpboot cpu 5: start_ip = 8c000
[ 0.846855] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.866707] #6
[ 0.866710] smpboot cpu 6: start_ip = 8c000
[ 0.979989] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.999833] #7
[ 0.999837] smpboot cpu 7: start_ip = 8c000
[ 1.113508] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.119625] Brought up 8 CPUs
[ 1.119631] Total of 8 processors activated (38369.65 BogoMIPS).
[ 1.126941] devtmpfs: initialized
[ 1.127773] PM: Registering ACPI NVS region at cf5e7000 (2097152 bytes)
[ 1.128489] print_constraints: dummy:
[ 1.128525] NET: Registered protocol family 16
[ 1.128610] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.128612] ACPI: bus type pci registered
[ 1.128680] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.128683] PCI: not using MMCONFIG
[ 1.128684] PCI: Using configuration type 1 for base access
[ 1.128692] dmi type 0xB1 record - unknown flag
[ 1.129167] bio: create slab <bio-0> at 0
[ 1.129214] ACPI: Added _OSI(Module Device)
[ 1.129215] ACPI: Added _OSI(Processor Device)
[ 1.129217] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.129219] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.130580] ACPI: EC: Look up EC in DSDT
[ 1.134328] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.209853] ACPI: SSDT 00000000cf5d7798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 1.210224] ACPI: Dynamic OEM Table Load:
[ 1.210227] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903)
[ 1.219718] ACPI: SSDT 00000000cf5d8a98 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 1.220112] ACPI: Dynamic OEM Table Load:
[ 1.220114] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903)
[ 1.229586] ACPI: SSDT 00000000cf5d6d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 1.229951] ACPI: Dynamic OEM Table Load:
[ 1.229953] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903)
[ 1.299445] ACPI: Interpreter enabled
[ 1.299447] ACPI: (supports S0 S3 S4 S5)
[ 1.299468] ACPI: Using IOAPIC for interrupt routing
[ 1.299484] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.299835] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 1.905755] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
[ 1.948489] ACPI: No dock devices found.
[ 1.948491] HEST: Table not found.
[ 1.948494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.948762] \_SB_.PCI0:_OSC invalid UUID
[ 1.948764] _OSC request data:1 8 1f
[ 1.948767] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.949244] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.949246] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.949248] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.949251] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfeafffff]
[ 1.949253] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.949263] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 1.949296] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.949320] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.949322] pci 0000:00:01.0: PME# disabled
[ 1.949366] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.949390] pci 0000:00:16.0: reg 10: [mem 0xe67b0000-0xe67b000f 64bit]
[ 1.949453] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.949458] pci 0000:00:16.0: PME# disabled
[ 1.949487] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[ 1.949505] pci 0000:00:19.0: reg 10: [mem 0xe6700000-0xe671ffff]
[ 1.949514] pci 0000:00:19.0: reg 14: [mem 0xe6780000-0xe6780fff]
[ 1.949524] pci 0000:00:19.0: reg 18: [io 0x5040-0x505f]
[ 1.949574] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.949578] pci 0000:00:19.0: PME# disabled
[ 1.949602] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.949623] pci 0000:00:1a.0: reg 10: [mem 0xe6770000-0xe67703ff]
[ 1.949696] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.949701] pci 0000:00:1a.0: PME# disabled
[ 1.949724] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.949739] pci 0000:00:1b.0: reg 10: [mem 0xe6760000-0xe6763fff 64bit]
[ 1.949794] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.949798] pci 0000:00:1b.0: PME# disabled
[ 1.949823] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.949920] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.949926] pci 0000:00:1c.0: PME# disabled
[ 1.949961] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.950061] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.950066] pci 0000:00:1c.1: PME# disabled
[ 1.950101] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 1.950201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.950206] pci 0000:00:1c.2: PME# disabled
[ 1.950241] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.950339] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.950344] pci 0000:00:1c.3: PME# disabled
[ 1.950376] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 1.950442] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.950446] pci 0000:00:1c.5: PME# disabled
[ 1.950477] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.950498] pci 0000:00:1d.0: reg 10: [mem 0xe6750000-0xe67503ff]
[ 1.950571] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.950576] pci 0000:00:1d.0: PME# disabled
[ 1.950601] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[ 1.950715] pci 0000:00:1f.2: [8086:282a] type 0 class 0x000104
[ 1.950734] pci 0000:00:1f.2: reg 10: [io 0x5090-0x5097]
[ 1.950742] pci 0000:00:1f.2: reg 14: [io 0x5080-0x5083]
[ 1.950750] pci 0000:00:1f.2: reg 18: [io 0x5070-0x5077]
[ 1.950758] pci 0000:00:1f.2: reg 1c: [io 0x5060-0x5063]
[ 1.950767] pci 0000:00:1f.2: reg 20: [io 0x5020-0x503f]
[ 1.950775] pci 0000:00:1f.2: reg 24: [mem 0xe6740000-0xe67407ff]
[ 1.950807] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.950811] pci 0000:00:1f.2: PME# disabled
[ 1.950829] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.950844] pci 0000:00:1f.3: reg 10: [mem 0xe6730000-0xe67300ff 64bit]
[ 1.950866] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 1.950922] pci 0000:01:00.0: [10de:1056] type 0 class 0x000300
[ 1.950930] pci 0000:01:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
[ 1.950939] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.950948] pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[ 1.950954] pci 0000:01:00.0: reg 24: [io 0x4000-0x407f]
[ 1.950960] pci 0000:01:00.0: reg 30: [mem 0xe5000000-0xe507ffff pref]
[ 1.950995] pci 0000:01:00.1: [10de:0e08] type 0 class 0x000403
[ 1.951003] pci 0000:01:00.1: reg 10: [mem 0xe5080000-0xe5083fff]
[ 1.951059] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.951061] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.951064] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
[ 1.951067] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 1.951136] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.951381] pci 0000:03:00.0: [8086:0082] type 0 class 0x000280
[ 1.951530] pci 0000:03:00.0: reg 10: [mem 0xe6600000-0xe6601fff 64bit]
[ 1.952110] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.952145] pci 0000:03:00.0: PME# disabled
[ 1.952317] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.952323] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
[ 1.952373] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
[ 1.952377] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 1.952381] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
[ 1.952388] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
[ 1.952433] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[ 1.952437] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.952442] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
[ 1.952448] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 1.952536] pci 0000:0b:00.0: [1217:13f7] type 0 class 0x000c00
[ 1.952570] pci 0000:0b:00.0: reg 10: [mem 0xe6530000-0xe6530fff]
[ 1.952769] pci 0000:0b:00.0: supports D1 D2
[ 1.952771] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.952779] pci 0000:0b:00.0: PME# disabled
[ 1.952855] pci 0000:0b:00.1: [1217:8321] type 0 class 0x000805
[ 1.952889] pci 0000:0b:00.1: reg 10: [mem 0xe6520000-0xe65201ff]
[ 1.953089] pci 0000:0b:00.1: supports D1 D2
[ 1.953091] pci 0000:0b:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.953099] pci 0000:0b:00.1: PME# disabled
[ 1.953169] pci 0000:0b:00.2: [1217:8331] type 0 class 0x000180
[ 1.953202] pci 0000:0b:00.2: reg 10: [mem 0xe6510000-0xe65103ff]
[ 1.953246] pci 0000:0b:00.2: reg 18: [mem 0xe6500000-0xe65003ff]
[ 1.953404] pci 0000:0b:00.2: supports D1 D2
[ 1.953406] pci 0000:0b:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.953414] pci 0000:0b:00.2: PME# disabled
[ 1.953509] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[ 1.953516] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
[ 1.953548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.953660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.953687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.953712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.953739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.953767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 1.953801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.953863] \_SB_.PCI0:_OSC invalid UUID
[ 1.953864] _OSC request data:1 1f 1f
[ 1.953868] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.953893] \_SB_.PCI0:_OSC invalid UUID
[ 1.953895] _OSC request data:1 0 1d
[ 1.953898] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.953899] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.956866] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.956905] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.956942] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.956977] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.957013] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.957050] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.957086] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.957123] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.957205] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.957208] vgaarb: loaded
[ 1.957209] vgaarb: bridge control possible 0000:01:00.0
[ 1.957258] PCI: Using ACPI for IRQ routing
[ 1.958763] PCI: pci_cache_line_size set to 64 bytes
[ 1.958852] reserve RAM buffer: 0000000000091400 - 000000000009ffff
[ 1.958854] reserve RAM buffer: 00000000cf225000 - 00000000cfffffff
[ 1.958856] reserve RAM buffer: 00000000cf5b7000 - 00000000cfffffff
[ 1.958858] reserve RAM buffer: 00000000cf800000 - 00000000cfffffff
[ 1.958860] reserve RAM buffer: 000000022e000000 - 000000022fffffff
[ 1.958938] NetLabel: Initializing
[ 1.958939] NetLabel: domain hash size = 128
[ 1.958940] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.958952] NetLabel: unlabeled traffic allowed by default
[ 1.958967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.958972] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.961986] Switching to clocksource hpet
[ 1.966608] pnp: PnP ACPI init
[ 1.966621] ACPI: bus type pnp registered
[ 1.966883] pnp 00:00: [bus 00-3e]
[ 1.966885] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.966887] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.966889] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.966891] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.966893] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.966894] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.966896] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.966898] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.966899] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.966901] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.966903] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.966905] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.966906] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.966908] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.966910] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.966911] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.966913] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.966915] pnp 00:00: [mem 0xd0000000-0xfeafffff window]
[ 1.966917] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.966968] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.966982] pnp 00:01: [io 0x0000-0x001f]
[ 1.966984] pnp 00:01: [io 0x0081-0x0091]
[ 1.966985] pnp 00:01: [io 0x0093-0x009f]
[ 1.966987] pnp 00:01: [io 0x00c0-0x00df]
[ 1.966988] pnp 00:01: [dma 4]
[ 1.967007] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.967014] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.967032] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.967094] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.967127] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.967130] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 1.967138] pnp 00:04: [io 0x00f0]
[ 1.967149] pnp 00:04: [irq 13]
[ 1.967168] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.967176] pnp 00:05: [io 0x002e-0x002f]
[ 1.967178] pnp 00:05: [io 0x004e-0x004f]
[ 1.967179] pnp 00:05: [io 0x0061]
[ 1.967180] pnp 00:05: [io 0x0063]
[ 1.967182] pnp 00:05: [io 0x0065]
[ 1.967183] pnp 00:05: [io 0x0067]
[ 1.967184] pnp 00:05: [io 0x0070]
[ 1.967186] pnp 00:05: [io 0x0080]
[ 1.967187] pnp 00:05: [io 0x0092]
[ 1.967188] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.967190] pnp 00:05: [io 0x0680-0x069f]
[ 1.967191] pnp 00:05: [io 0x1000-0x100f]
[ 1.967193] pnp 00:05: [io 0xffff]
[ 1.967194] pnp 00:05: [io 0xffff]
[ 1.967195] pnp 00:05: [io 0x0400-0x047f]
[ 1.967197] pnp 00:05: [io 0x0500-0x057f]
[ 1.967198] pnp 00:05: [io 0x164e-0x164f]
[ 1.967233] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.967235] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.967237] system 00:05: [io 0xffff] has been reserved
[ 1.967239] system 00:05: [io 0xffff] has been reserved
[ 1.967241] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.967243] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.967245] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.967248] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.967254] pnp 00:06: [io 0x0070-0x0077]
[ 1.967260] pnp 00:06: [irq 8]
[ 1.967280] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.967287] pnp 00:07: [io 0x0060]
[ 1.967289] pnp 00:07: [io 0x0064]
[ 1.967295] pnp 00:07: [irq 1]
[ 1.967313] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.261804] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 2.261817] pnp 00:09: [irq 12]
[ 2.261839] pnp 00:09: Plug and Play ACPI device, IDs DLL0494 PNP0f13 (active)
[ 2.261970] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 2.261972] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 2.261974] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 2.261975] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 2.261977] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 2.261978] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 2.261980] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 2.261981] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 2.261983] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 2.261984] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 2.261986] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 2.261988] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 2.262035] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.262038] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.262040] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.262042] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.262044] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 2.262046] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.262048] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.262050] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.262052] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.262055] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.262057] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.368290] pnp 00:0b: [irq 23]
[ 2.368321] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.901044] pnp 00:0c: can't evaluate _CRS: 12311
[ 2.901163] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.901224] pnp: PnP ACPI: found 13 devices
[ 2.901225] ACPI: ACPI bus type pnp unregistered
[ 2.907642] PCI: max bus depth: 1 pci_try_num: 2
[ 2.907686] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.907689] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 2.907692] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
[ 2.907695] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 2.907698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.907710] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 2.907715] pci 0000:00:1c.1: bridge window [mem 0xe6600000-0xe66fffff]
[ 2.907723] pci 0000:00:1c.2: PCI bridge to [bus 04-09]
[ 2.907727] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 2.907732] pci 0000:00:1c.2: bridge window [mem 0xe5b00000-0xe64fffff]
[ 2.907737] pci 0000:00:1c.2: bridge window [mem 0xe2b00000-0xe34fffff 64bit pref]
[ 2.907743] pci 0000:00:1c.3: PCI bridge to [bus 0a-0a]
[ 2.907746] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 2.907752] pci 0000:00:1c.3: bridge window [mem 0xe5100000-0xe5afffff]
[ 2.907756] pci 0000:00:1c.3: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
[ 2.907763] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[ 2.907768] pci 0000:00:1c.5: bridge window [mem 0xe6500000-0xe65fffff]
[ 2.907788] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.907791] pci 0000:00:01.0: setting latency timer to 64
[ 2.907798] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.907802] pci 0000:00:1c.0: setting latency timer to 64
[ 2.907813] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.907817] pci 0000:00:1c.1: setting latency timer to 64
[ 2.907828] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.907833] pci 0000:00:1c.2: setting latency timer to 64
[ 2.907844] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.907848] pci 0000:00:1c.3: setting latency timer to 64
[ 2.907855] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.907859] pci 0000:00:1c.5: setting latency timer to 64
[ 2.907863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.907865] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.907867] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.907869] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfeafffff]
[ 2.907871] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 2.907873] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 2.907875] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
[ 2.907876] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[ 2.907879] pci_bus 0000:03: resource 1 [mem 0xe6600000-0xe66fffff]
[ 2.907881] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 2.907882] pci_bus 0000:04: resource 1 [mem 0xe5b00000-0xe64fffff]
[ 2.907884] pci_bus 0000:04: resource 2 [mem 0xe2b00000-0xe34fffff 64bit pref]
[ 2.907886] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
[ 2.907888] pci_bus 0000:0a: resource 1 [mem 0xe5100000-0xe5afffff]
[ 2.907890] pci_bus 0000:0a: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
[ 2.907892] pci_bus 0000:0b: resource 1 [mem 0xe6500000-0xe65fffff]
[ 2.907916] NET: Registered protocol family 2
[ 2.908115] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 2.908943] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.910176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.910301] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.910303] TCP reno registered
[ 2.910320] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.910353] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.910446] NET: Registered protocol family 1
[ 2.910559] pci 0000:01:00.0: Boot video device
[ 2.910582] PCI: CLS 64 bytes, default 64
[ 2.910623] Unpacking initramfs...
[ 2.941993] Freeing initrd memory: 2500k freed
[ 2.942232] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.942234] Placing 64MB software IO TLB between ffff8800cb225000 - ffff8800cf225000
[ 2.942236] software IO TLB at phys 0xcb225000 - 0xcf225000
[ 2.942252] Simple Boot Flag at 0xf3 set to 0x1
[ 2.942809] audit: initializing netlink socket (disabled)
[ 2.942818] type=2000 audit(1327170869.719:1): initialized
[ 2.952233] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.971773] VFS: Disk quotas dquot_6.5.2
[ 2.971823] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.971901] msgmni has been set to 15887
[ 2.972033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.972054] io scheduler noop registered
[ 2.972055] io scheduler deadline registered
[ 2.972083] io scheduler cfq registered (default)
[ 2.972164] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.972192] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 2.972515] intel_idle: MWAIT substates: 0x21120
[ 2.972517] intel_idle: v0.4 model 0x2A
[ 2.972518] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.972569] ERST: Table is not found!
[ 2.972570] GHES: HEST is not enabled!
[ 2.972615] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.223771] Linux agpgart interface v0.103
[ 3.223852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.224055] i8042: Warning: Keylock active
[ 3.225294] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.225305] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.225409] mousedev: PS/2 mouse device common for all mice
[ 3.225438] rtc_cmos 00:06: RTC can wake from S4
[ 3.225568] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.225598] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.225805] cpuidle: using governor ladder
[ 3.226119] cpuidle: using governor menu
[ 3.226278] TCP cubic registered
[ 3.226280] NET: Registered protocol family 17
[ 3.226287] Registering the dns_resolver key type
[ 3.226330] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.226399] PM: Hibernation image not present or could not be loaded.
[ 3.226403] registered taskstats version 1
[ 3.330608] rtc_cmos 00:06: setting system clock to 2012-01-21 18:34:30 UTC (1327170870)
[ 3.330648] Initializing network drop monitor service
[ 3.331805] Freeing unused kernel memory: 728k freed
[ 3.331879] Write protecting the kernel read-only data: 8192k
[ 3.336886] Freeing unused kernel memory: 1848k freed
[ 3.338985] Freeing unused kernel memory: 696k freed
[ 3.346637] udevd[62]: starting version 175
[ 3.373920] usbcore: registered new interface driver usbfs
[ 3.373946] usbcore: registered new interface driver hub
[ 3.373985] usbcore: registered new device driver usb
[ 3.374685] SCSI subsystem initialized
[ 3.374842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.374865] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.374895] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.374899] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.374921] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.374947] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.378261] libata version 3.00 loaded.
[ 3.378830] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.378848] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xe6770000
[ 3.390100] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.390262] hub 1-0:1.0: USB hub found
[ 3.390266] hub 1-0:1.0: 2 ports detected
[ 3.390336] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.390415] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.390418] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.390426] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.390451] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.394340] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.394356] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xe6750000
[ 3.406750] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.406906] hub 2-0:1.0: USB hub found
[ 3.406910] hub 2-0:1.0: 2 ports detected
[ 3.407025] ahci 0000:00:1f.2: version 3.0
[ 3.407039] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.407125] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 3.407153] ahci: SSS flag set, parallel bus scan disabled
[ 3.420086] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode
[ 3.420090] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.420096] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.447308] scsi0 : ahci
[ 3.447476] scsi1 : ahci
[ 3.447634] scsi2 : ahci
[ 3.447824] scsi3 : ahci
[ 3.447980] scsi4 : ahci
[ 3.448128] scsi5 : ahci
[ 3.696308] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.820574] hub 1-1:1.0: USB hub found
[ 3.820741] hub 1-1:1.0: 6 ports detected
[ 3.925982] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.942601] Refined TSC clocksource calibration: 2394.560 MHz.
[ 3.942607] Switching to clocksource tsc
[ 4.049970] hub 2-1:1.0: USB hub found
[ 4.050017] hub 2-1:1.0: 8 ports detected
[ 4.115834] ata1: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740100 irq 42
[ 4.115839] ata2: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740180 irq 42
[ 4.115841] ata3: DUMMY
[ 4.115844] ata4: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740280 irq 42
[ 4.115848] ata5: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740300 irq 42
[ 4.115851] ata6: SATA max UDMA/133 abar m2048@0xe6740000 port 0xe6740380 irq 42
[ 4.315609] usb 2-1.3: new full-speed USB device number 3 using ehci_hcd
[ 4.430812] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
[ 4.430911] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[ 4.433014] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
[ 4.433285] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[ 4.433299] usbcore: registered new interface driver usbhid
[ 4.433300] usbhid: USB HID core driver
[ 4.435196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.468605] usb 2-1.8: new full-speed USB device number 4 using ehci_hcd
[ 4.578165] usb 2-1.8: config 0 descriptor??
[ 4.731814] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.757591] ata1.00: ATA-8: ST320LT020-9YG142, 0003DEM1, max UDMA/133
[ 4.757594] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.031427] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.031862] ata1.00: configured for UDMA/133
[ 5.037876] scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 0003 PQ: 0 ANSI: 5
[ 5.357163] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.359389] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8B2, 1.01, max UDMA/100
[ 5.361668] ata2.00: configured for UDMA/100
[ 5.363879] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8B2 1.01 PQ: 0 ANSI: 5
[ 5.683344] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.002867] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.322394] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.327719] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 6.327723] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 6.327800] sd 0:0:0:0: [sda] Write Protect is off
[ 6.327804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.327834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.329859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.329868] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.330052] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.449243] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 6.450747] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.338185] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 7.338188] EXT4-fs (sda6): write access will be enabled during recovery
[ 10.955863] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 10.955871] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523699
[ 10.955918] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523418
[ 10.955931] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523574
[ 10.955944] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523423
[ 10.955953] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523421
[ 10.955962] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523419
[ 10.955971] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523417
[ 10.955980] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523237
[ 10.955992] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523255
[ 10.956001] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523254
[ 10.956011] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523241
[ 10.956020] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523238
[ 10.956029] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523236
[ 10.956038] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 523178
[ 10.956047] EXT4-fs (sda6): 14 orphan inodes deleted
[ 10.956049] EXT4-fs (sda6): recovery complete
[ 13.645965] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.112195] udevd[252]: starting version 177
[ 15.469613] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 15.498519] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 15.498521] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 15.498553] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 15.498564] e1000e 0000:00:19.0: setting latency timer to 64
[ 15.498704] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 15.504929] wmi: Mapper loaded
[ 15.520894] iTCO_vendor_support: vendor-support=0
[ 15.543541] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.579114] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 15.579433] ACPI: Lid Switch [LID]
[ 15.579495] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 15.579499] ACPI: Power Button [PBTN]
[ 15.579557] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 15.579560] ACPI: Sleep Button [SBTN]
[ 15.579617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 15.579620] ACPI: Power Button [PWRF]
[ 15.643123] Disabling lock debugging due to kernel taint
[ 15.707133] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 15.707236] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 15.707306] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.799015] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) d4:be:d9:12:a3:70
[ 15.799019] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 15.799068] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 4041FF-0FF
[ 15.799125] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.799134] mei 0000:00:16.0: setting latency timer to 64
[ 15.799203] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 15.812872] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 15.813000] watchdog: error registering /dev/watchdog (err=-16).
[ 15.813086] mei: unable to register watchdog device.
[ 15.851527] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 15.874775] nvidia: module license 'NVIDIA' taints kernel.
[ 15.928355] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 15.928363] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 15.928371] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.928378] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.928382] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 15.928579] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 15.952161] alps.c: Enabled hardware quirk, falling back to psmouse-core
[ 15.965757] input: ImPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 16.460764] thermal LNXTHERM:00: registered as thermal_zone0
[ 16.460767] ACPI: Thermal Zone [THM] (25 C)
[ 16.993137] ACPI: Battery Slot [BAT0] (battery present)
[ 17.516214] ACPI: Battery Slot [BAT1] (battery absent)
[ 17.628974] acpi device:16: registered as cooling_device8
[ 17.885641] ACPI: Battery Slot [BAT2] (battery absent)
[ 17.905918] ACPI: AC Adapter [AC] (off-line)
[ 17.906649] parport_pc 00:08: [io 0x0378-0x037b]
[ 17.906712] parport_pc 00:08: [irq 5]
[ 17.908312] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 17.911829] sdhci: Secure Digital Host Controller Interface driver
[ 17.911831] sdhci: Copyright(c) Pierre Ossman
[ 17.914318] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 17.914335] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 17.914367] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 17.914511] sdhci-pci 0000:0b:00.1: setting latency timer to 64
[ 17.914529] _regulator_get: 0000:0b:00.1 supply vmmc not found, using dummy regulator
[ 17.914568] Registered led device: mmc0::
[ 17.915610] mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
[ 17.955391] firewire_ohci 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.955400] firewire_ohci 0000:0b:00.0: setting latency timer to 64
[ 17.955433] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.955505] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 17.955527] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 17.955748] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input10
[ 17.955806] ACPI: Video Device [VID] (multi-head: yes rom: yes post: no)
[ 17.967345] cfg80211: Calling CRDA to update world regulatory domain
[ 17.972266] ppdev: user-space parallel port driver
[ 18.008312] firewire_ohci: Added fw-ohci device 0000:0b:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x10
[ 18.020285] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 18.020288] Copyright(c) 2003-2011 Intel Corporation
[ 18.021643] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.021654] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 18.021753] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 18.021755] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057f4000
[ 18.021757] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 18.021914] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 18.021951] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 18.022002] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 18.027654] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 18.036450] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 18.036579] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 18.036701] input: HDA Intel PCH Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 18.036773] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 18.037021] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.037023] hda_intel: Disabling MSI
[ 18.037097] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 18.039318] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 18.039321] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 18.039322] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 18.039336] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 18.061668] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 18.061790] Registered led device: phy0-led
[ 18.080373] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.394490] parport_pc 00:08: activated
[ 18.394496] parport_pc 00:08: reported by Plug and Play ACPI
[ 18.394576] parport_pc 00:08: disabled
[ 18.404379] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 18.431005] HDMI status: Codec=0 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 18.457641] HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 18.471036] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 18.471194] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 18.471371] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 18.507770] firewire_core: created device fw0: GUID 00cc9ae1394fc000, S400
[ 31.817983] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 31.964978] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 35.242765] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 35.295945] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 35.328281] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 35.335000] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 35.622269] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 35.629014] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 43.022366] wlan0: authenticate with 5c:33:8e:1b:88:9d (try 1)
[ 43.024202] wlan0: authenticated
[ 43.024437] wlan0: associate with 5c:33:8e:1b:88:9d (try 1)
[ 43.027595] wlan0: RX AssocResp from 5c:33:8e:1b:88:9d (capab=0x431 status=0 aid=1)
[ 43.027598] wlan0: associated
[ 47.106109] EXT4-fs (sda6): re-mounted. Opts: commit=600
[ 47.108016] EXT4-fs (sda7): re-mounted. Opts: commit=600
[ 57.310942] fuse init (API version 7.17)
[ 59.255839] NET: Registered protocol family 10
[ 59.256408] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 69.910943] wlan0: no IPv6 routers present
Last edited by tmske (2012-01-21 21:41:04)
Hi,
I've the same notebook. I've not had any hardlocks so far, but I've not seen so much flash movies yet. Anyway, I just tried closing running youtube-video tab on Kde4 + enabled desktop effects -> Everything's fine.
Anyway, perhaps we can collect some issues and solutions in this thread. Here are problems, that I encounter:
- restart does not work
- errors during boot:
[ 2.399277] pnp 00:0b: [irq 23]
[ 2.399308] pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
[ 2.932179] pnp 00:0c: can't evaluate _CRS: 12311
[ 14.616662] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.616771] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 14.616792] iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
[ 14.616904] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 9.262898] sdhci-pci 0000:0b:00.1: SDHCI controller found [1217:8321] (rev 5)
[ 9.262920] sdhci-pci 0000:0b:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 9.262966] sdhci-pci 0000:0b:00.1: Invalid iomem size. You may experience problems.
[ 9.263176] sdhci-pci 0000:0b:00.1: setting latency timer to 64
Issued solved:
- in order to make nvidia graphics working you have to disable Optimius in BIOS.
- Battery not recognized -- fixed after recend updates
- grub2 does not work. As soon as grub2 loads, the laptop reboots. -> stick to grub1 -- works now (either I did sth wrong the first time or a new version of grub2 fixes this issue)
- in order to make the touchpad work properly install psmouse-elantech from AUR
update: this is only a half-solution. vertical scrolling on the right edge works but graphical tools which rely on x11-input-synpatics still don't work. However, everything works fine with kernel 3.3. Once this in the main arch repos you won't need psmouse-elantech anymore.
Last edited by knue (2012-03-06 23:26:26)
Similar Messages
-
[SOLVED] Virtualbox VM Hard Locks Entire Machine
This is a very strange issue. I have a Windows 7 VM that I use for school. Last week, it was working just fine. However, today whenever I start the VM, my entire laptop hard locks. It locks so hard that I cannot switch to a TTY, the mouse cursor is froze, the screen stops, it's locked up HARD and the only thing I can do is forcefully turn it off.
This VM is critical for me, is there any way to get this working again?
Edit: I forgot to mention I tried rebuilding the kernel modules and restarting.
Last edited by jlacroix (2010-09-03 19:58:21)loafer wrote:
jlacroix wrote:It looks like rebuilding virtualbox_bin from AUR solved it. I wonder if it's possible to find out what happened, so I can avoid this from happening again?
See wonder's post. What is required is:
/etc/rc.d/vboxdrv setup
I did do that before posting this thread, and it did not fix it. -
Data Recovery of data from laptop hard drives
This hard drive is from a T60 laptop - please read below, thanks
1. Working laptop with a working hard Download drive ( I know this is the case as if you insert the drive into the laptop , power it on, it loads windows xp, you can use the laptop as per normal without any errors / issues etc )
We have an external hard drive kit ( again which I know that works as I use it to connect a multitude of other hard drives via USB to a desktop PC ) and I have another hard drive kit different to the first USB to SATA hard drive recovery kit and it does the same when trying to access the data off of the laptops hard drive
If I connect the laptop hard drive to my desktop PC it refuses to show up in my computer yet if you right click my computer --> Manage --> Disk Management
The drive shows up in here as un-initialised and if you attempt to initialise the drive it fails stating it has CRC error(s) and it will not assign it a drive letter.
Is there a quick way to access the data on the drive ?
As far as I am aware the drives are not encrypted as when loading after the POST from bios you do not get any blue / purple progress bars loading, these are Windows XP SP 3 so not using bit locker or anything like that.
What do I need to do to get access to the data as quick as possible without doing too many steps or waiting for utils to recover data etc.
Also what do Lenovo do to the hard drives that cause this many head aches ??Disabled this option in regards to the hard drive password, saved this by pressing F10 and exited the bios until it prompted me for the startup bios password. Powered the laptop off, took the hard drive out and connected it to the desktop pc and it mounted the drive straight off the bat.
What I would like to know then is what does it change on the hard drive to stop you from mounting or accessing the data
I haven't played with the build in security of lenovo for a few years, too much trouble. Basically I think the security chip build into each lenovo will modify certain fields on the harddisk chip. Hence the data are soft 'encrpted' this way. There is an official lenovo software that you can install on the desktop to simulate the security chip, so I guess the data is not hard 'encrpted', just scrambled. When you removed the user password, it probably reset those fields so there is no more scrambling when connected to the desktop
If you turn on security chip, lenovo client security solution, adminstrator password, master password and all those junk, then it will be a different story.
Glad that your problem is solved B-) -
Mounting USB Hard Drives and Hard Locking
So, it's been a long time since I've posted here which I have to say, is because Arch was running beautifully for a long time. Sadly though, my laptop was stolen and I was forced to buy a new one. With the new one, I've gotten everything mostly back up and running but I'm having an issue. Obviously the one in the subject line.
A few things to note about this install and after testing before posting.
1. Brand new install
2. All packages are current EXCEPT 3. I currently have nvidia-256.53-1-x86_64, nvidia-utils with the same version, and kernel26-2.6.35.5-1. These are due to a black screen I was getting on starting my xserver.
3. HAL is running
4. Optical disks mount and umount cleanly.
5. NTFS-3G is installed and working.
6. My Windows 7 install on the same internal hard drive can be accessed and mounted without a hard lock.
My problem is this. Whenever I try and connect an external hard drive via USB, it takes a few seconds and then the whole machine hard locks with what looks like a kernel panic(can't do anything and I have blinking lights...ie capslock, etc). This computer seems to have USB 3.0 which I noticed from Win7 awhile back if that makes a difference. (05:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) )
Last time I try to mount my WD Passport, I ran dmesg right after I plugged it in before I got my hard lock. The only thing I noticed were the entries at the bottom of things like this...
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
I have no idea whether that has anything to do with it or not. I'd be more than happy to post config files if needed. I've tried googling, the wiki, and the forums and I'm stumped. I actually plugged my drive in one time and got it to mount and opened some folders. Afterward, it hard locked.
Last edited by Vipes (2010-12-10 07:09:42)So, I started looking at my logs. Here's the bottom cut from errors.log:
Dec 10 08:04:03 localhost kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Dec 10 08:04:03 localhost kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Dec 10 08:04:03 localhost kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Cut from my dmesg when I plugged the drive in:
usb 2-4: new high speed USB device using xhci_hcd and address 0
xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
sd 6:0:0:0: [sdb] 623769600 512-byte logical blocks: (319 GB/297 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 10 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sr1: scsi3-mmc drive: 51x/51x caddy
sr 6:0:0:1: Attached scsi CD-ROM sr1
sr 6:0:0:1: Attached scsi generic sg3 type 5
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb:
scsi 6:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
scsi 6:0:0:2: Attached scsi generic sg4 type 13
sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
ses 6:0:0:2: Attached Enclosure device
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
fuse init (API version 7.14)
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
Kernel messages show pretty much the same thing. These logs were from just a moment ago when I plugged it in and then removed it. Sometimes it seems to hard lock, others it doesn't. Got me. -
My turn to post a question, USB Flash drive hard lock issues
So not sure if anyone here will be able to help me. Maybe someone from GS has run into this issue, or someone with tech experience can help. The following is from my post on another forum:
This issue has really been bugging me. For the last year I've been having an issue with every version of Windows (XP, Vista, Windows 7). When I insert a flash drive the system will work just fine. When I move a single large file to a flash drive it'll work fine, when I move small files or read small files from a flash drive my entire system hard locks.
Everything freezes, I hit reset, it asks if I want safe mode, then back to the desktop. There are no errors in the error logs. Reliability monitor doesn't show any related issues.
Being of a technological nature I booted into Ubuntu. Everything works perfectly. Put the drive on my hackbook, and everything worked perfectly. OS X, worked perfectly. Tried it on my girlfriend's Vista laptop, worked perfectly.
This issue happens with anything that is detected as a portable storage. It happens with my memory card reader, my flash drives (sandisk, pny, kingston and sony) as well as with my sandisk sansa and iriver mp3 players, but when I set those up as MTP devices they work perfectly.
I have enabled and disabled legacy USB support, re-installed with slipstreamed SP1, xp sp3, vista ultimate without sp1, and the most recent beta of windows 7. Every time I figured it was related to some other USB device, but it's not. Last night I reloaded Vista (without a service pack) and before I installed anything I put a flash drive in and tried transferring some files to it. Hard lock, no other USB devices plugged in, let alone installed.
Specs:
AMD Athlon 6400+
MSI K9A Platinum
2GB Corsair XMS2
9600 GSO 512MB
This is a major inconvience. Putting files on a flash drive should be the easiest thing in the world, not something that should force me into a different OS. Please help!
Give a man a fish and he'll eat for a day, but hit a man with a brick and you can have all his fish...and his wife!
My views may not represent the views of my employer, Best Buy.
Solved!
Go to Solution.You're welcome.
According to MSI's website, there are multiple ways to flash the BIOS. Here are the links to their documents on the alternatives.
How to flash the BIOS CD
How to flash the BIOS Flash Drive
How to upgrade BIOS using MSI LiveUpdate Utility
This page shows all of the BIOS updates available for download for the K9A Platinum. Probably best to go with the latest release.
I don't have any MSI products but it looks like LiveUpdate might be the easiest since it works from inside the operating system. If that will not work for you then I would use CD. They're easy to make bootable following the guide above.
Hope this helps you.
Jacob|Web Planner | Best Buy® Corporate -
Digital signature hard lock dongle is not working.
Hi,
I have a digital signature hard lock dongle.
Which is not detecting on windows 7 64bit professional. However it is working with another dongle like Data Card, Pen drive, etc.
I also checked with another system it is working fine with other laptops. And digital signature dongle is working fine with other system also. But particular one system it is not able to recognize the same.
Please suggest for the same.
Thanks,
TapasHi ittapas,
I suggest you manually find the driver in the dongle manufacture website, download and install it in your system, as well as some needed applications, if issue persists, check if you have any previous restore point, return the PC to a previous restore point
at which the system was functioning fine, test the issue.
Regards
Yolanda Zhu
TechNet Community Support -
Complete and unexpected hard-lock on authentication
Hello. I've recently experienced my first hard-lock on my MacBook Pro. I'm running 10.6.8, and I can't seem to figure out what cuased it. It's making me very worried for the health and stability of my system.
What happened was this: I use password protection on my screen saver, and I do not put my laptop into sleep mode. Instead I use a hotcorner to activate the screen saver when I walk away from the machine, and then reauthenticate when I come back. After about ~30 min away from the keys, I came back and tried to authenticate, only to find that the password input window was not accepting keyboard input. Eventually I realized that the system had hard locked for a reason I couldn't understand. I had to force the machine to power down, and then boot it back up. The reboot was slower than I'd expect (though maybe that was just my nerves and imagination). In the hour or so since then, it's not repeated itself, even when trying to replicate the circumstances of the lockup.
The console messages didn't help much, but perhaps someone else can make more sense of them than I can. From what I can gather, a backup started, and then the ethernet port went down. My VPN client (which wasn't running or connected) then tried to switch interfaces to see if other internet connections were available - despite my not being connected to the VPN or running the client.
Here's the relevent time stamped log entries between the first notice of hard-locking and rebooting. I've redacted computer, drive, and host names, as well as mac addresses and IP addresses. I'm not sure what to make of it. Any help would be greatly appreciated. I'm not sure if this was a fluke, or a harbringer of something more sinister.
12/12/11 4:33:09 PM com.apple.backupd[1322] Starting standard backup
12/12/11 4:33:14 PM com.apple.backupd[1322] Backing up to: /Volumes/[REDACTED]/Backups.backupdb
12/12/11 4:33:21 PM com.apple.backupd[1322] No pre-backup thinning needed: 3.32 GB requested (including padding), 38.24 GB available
12/12/11 4:34:47 PM kernel Ethernet [AppleBCM5701Ethernet]: Link down on en0
12/12/11 4:34:47 PM kernel CiscoVPN : attempting to attach to all available ethernet interfaces.
12/12/11 4:34:47 PM kernel CiscoVPN : checking if we are already attached to interface: en1
12/12/11 4:34:47 PM kernel CiscoVPN : checking if we are already attached to interface: en0
12/12/11 4:34:47 PM kernel CiscoVPN : attempting to attach to all available ethernet interfaces.
12/12/11 4:34:47 PM kernel CiscoVPN : checking if we are already attached to interface: en1
12/12/11 4:34:47 PM kernel CiscoVPN : checking if we are already attached to interface: en0
12/12/11 4:34:47 PM acvpnagent[46] The network interface for the VPN connection has gone down.
12/12/11 4:34:47 PM acvpnagent[46] Function: logInterfaces File: RouteMgr.cpp Line: 2105 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List:
12/12/11 4:34:47 PM acvpnagent[46] Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 8446 No network interface is available, will not apply the noVPN host configuration.
12/12/11 4:34:47 PM acvpnagent[46] Current network state: No network interface
12/12/11 4:34:47 PM acvpnagent[46] Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 8446 No network interface is available, will not apply the noVPN host configuration.
12/12/11 4:34:47 PM configd[13] setting hostname to "[REDACTED].local"
12/12/11 4:34:47 PM configd[13] network configuration changed.
12/12/11 4:34:55 PM com.apple.backupd[1322] Copied 902 files (1.2 MB) from volume [REDACTED].
12/12/11 4:34:56 PM com.apple.backupd[1322] No pre-backup thinning needed: 3.32 GB requested (including padding), 38.23 GB available
12/12/11 4:34:57 PM com.apple.Finder[174] Failed to send message to backup server: error = -2
12/12/11 4:34:58 PM mDNSResponder[29] 19: Could not write data to client after 10 seconds, 3 replies waiting
12/12/11 4:35:03 PM com.apple.backupd[1322] Copied 153 files (491 KB) from volume [REDACTED].
12/12/11 4:35:04 PM com.apple.backupd[1322] Starting post-backup thinning
12/12/11 4:35:07 PM mDNSResponder[29] 19: Could not write data to client after 20 seconds, 3 replies waiting
12/12/11 4:35:11 PM com.apple.backupd[1322] Deleted backup /Volumes/[REDACTED]/Backups.backupdb/[REDACTED]/2011-12-11-155148: 38.24 GB now available
12/12/11 4:35:11 PM com.apple.backupd[1322] Post-back up thinning complete: 1 expired backups removed
12/12/11 4:35:11 PM com.apple.backupd[1322] Backup completed successfully.
12/12/11 4:35:17 PM mDNSResponder[29] 19: Could not write data to client after 30 seconds, 3 replies waiting
12/12/11 4:35:28 PM mDNSResponder[29] 19: Could not write data to client after 40 seconds, 3 replies waiting
12/12/11 4:35:38 PM mDNSResponder[29] 19: Could not write data to client after 50 seconds, 3 replies waiting
12/12/11 4:35:38 PM acvpnagent[46] A new network interface has been detected.
12/12/11 4:35:38 PM acvpnagent[46] Function: logInterfaces File: RouteMgr.cpp Line: 2105 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List: [REDACTED]
12/12/11 4:35:38 PM kernel Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [REDACTED]
12/12/11 4:35:38 PM kernel CiscoVPN : attempting to attach to all available ethernet interfaces.
12/12/11 4:35:38 PM kernel CiscoVPN : checking if we are already attached to interface: en1 12/12/11 4:35:38 PM kernel CiscoVPN : checking if we are already attached to interface: en0I saw one very recent question where Test Pilot proved to be a problem.
In due course, you'll probably need to work your way through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes -
I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?
Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy? -
Hello forum,
i have been using Archlinux for some months now and so far the only issue is that Mplayer/Vlc seems very unstable. For some time i didn't have any problems but I guess that after upgrading glibc or glib that I experience hard lock ups in the kernel (flashing lights on the keyboard). Only happens when watching movies in mplayer/vlc. No error logs indicating what the problem could be. Anyone experiencing the same?
Running Arch64 (duh...) on a dual opteron 250, xfce4/e17, quadro-fx 1100
Thanks for help,
UlfWell i figured it was due to glibc, it happened before and i was already building/trying a new distro. Luckily the arch linux guys posted a message about the mplayer/flash/firefox/zlib/glibc bug. After the updates it worked again but then there was yet another release of glibc and it broke things again...Guess i should be more carefull with updating.
If i experience more crashes i'll try recompiling zlib, ffmpeg, vlc and mplayer (in that order). -
I have just had my Toshiba laptop hard drive replaced. This has resulted in all previous content held on the laptop to be lost. I wanted to try and transfer my music library from my ipad to the laptop, but it will not allow me to do so. The message is that the ipad is linked to another computer and it will only allow the transfer of the items purchased on through the ipad and nothing else. Does anyone know if the full library can be transferred back to the computer?
You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before. -
My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.
Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
If not, please try searching the forum. This has been addressed hundreds of times here. -
Hello.... I already loaded logic 9 on my laptop hard drive... I would to load all the samples and loops on an external drive... Do I need to reinstall from DVD's or can I drag and drop?
Thank you.... Would you know where they would be on my hard dive? Are they all together?
-
my laptop hard drive crashed, used to have lion now it is back to snow leopard. i lost all of my info, music, pictures, etc. how do i get it back to lion again? this is very frustrating because i paid $30 to download it and now i am unable to have it again.
If your Mac is off then start up. As soon as you hear the boot chime, hold down the Option key until the Mac and Windows Disks show up. Then click on the Mac disk and the arrow below it. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk.
If you are in Windows then look for the Boot Camp icon on the taskbar. It will look like a gray box sitting on one corner. One of the options when you click it is to restart in Mac OS. After it boots up in Mac then go to System Preferences>Startup Disk and select your Mac partition as the Startup disk. -
Can I Use a 2.5 Laptop Hard Drive in Time Capsule?
Ok. So the original Hard Drive is Dead. I have a 640 GB 2.5 Laptop Hard Drive lying around.
My question is, Can I put the 2.5 HD in the Time Capsule instead of a 3.5 HD Repacement?
Running Mountain Lion on iMac. Thanks in Advance!SBeattie2 wrote:
You could try a 3.5" to 2.5" drive adapter - that would allow you to properly mount the 2.5" drive inside the time capsule.
Actually the 2.5" still needs to sit right next to the hard drive frame.. as the cables will not stretch very far.. but the 2.5" works fine in the TC.. and it is simple since sata connectors are now common across 2.5" and 3.5" drives.
The actual disassembly of the TC see here.. you come in from the bottom.
http://www.ifixit.com/Device/Apple_Time_Capsule
The temperature gauge is completely useless.. you can actually remove it completely.. Apple measures the temperature via the sensor (a backwards transistor).. and does nothing about it.. the fan never turns on.. not in Gen 1, Gen 2 or Gen 3.. they seem to have relented a bit in Gen 4... perhaps due to the level of complaints about overheating.
One great thing about running it with 2.5" drive.. you can remove the power supply which will be on its last legs and get a plugpack.. 5v 3A, and run the TC from that.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
Repair method 3. -
How do i transfer files from my hard drive to an external hard drive as FAT files? Laptop hard dive is full and I need to clear space.
In Disk Utility use MS-DOS
Try http://www.mactip.net/guide-how-to-format-an-external-drive-to-work-seamlessly-w ith-macs-and-pcs-without-third-party-software/ for additional directions.
Allan
Maybe you are looking for
-
Restrict creation of Change Document without a change request
Hello Experts, Is there a way within Charm to restrict the creation of a change document through crmd_order or a business transaction and instead force the creation of all change documents to start from a change request? Some users are bypassing the
-
How to perform a character protect when using include text in Script form?
In my main window I have code as below: INCLUDE &GS_EKKO-EBELN& OBJECT EKKO ID F19 LANGUAGE EN INCLUDE &GS_EKKO-EBELN& OBJECT EKKO ID F19 LANGUAGE ZH There is nothing wrong with language zh but... For English,Every word at the end of line was splited
-
HOW DO I GET BROWSERLAB TO APPEAR IN "PREVIEW IN BROWSER"?
I HAD TO RE-INSTALL DREAMWEAVER. THE BROWSER LAB DISAPPEARED FROM THE "PREVIEW IN BROWSER" OPTION. I RE-DOWNLOADED THE PREFERENCE EXTENSIONS. I CAN ACCESS THE ADOBE BROWSER LAB FROM SAFARI, BUT NOT FROM WITHIN DREAMWEAVER. SUGGESTIONS?
-
WLSE Not showing the RSSI the AP reported Rogue APs in my scanning-only mod
Hi guys I have a WLSE version 2.15.1 which is configured to detect Rogue AP, APs are 1242, when I see the Unknown AP detail the RSSI has a value of 0 for all Rogue AP detected any help or suggestions, I will be very useful. Thank you. Greetings
-
i had to reset my computer to factory settings and had to redownload itunes. i am not attempting to purchase songs and its asking me for security questions. however, the questions that they are asking i never chose. how can i change them?