Laptop HP G6000 not switching on
Hi
I have HP G6000 Laptop with Windows Vista home.
When I press power button, light come on and laptop get on and quickly turn off. Then Laptop switching on and off by itself in a loop. I am not getting any display on the screen.
Please can you help.
Thanks
Hi,
Try a hard reset as follows:
1) Remove the battery and unplug the DC power adapter.
2) Press and hold the power button for more than fifteen seconds.
3) Plug in the DC power adapter (leave the battery out for now)
4) Press the power button
Please post your positive or negative results here in your thread.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.
I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
I need to switch my iPod touch, 4S generation, to another computer. I use Dell, I origanally had it synched on a Dell laptop, but am not allowed to do so on that anymore. I am on a Dell PC, and want to change it over to this computer. How do I do that?
Plug it in and sync it.
It will erase the ipod content and replace with the content from the new computer so make sure that you have copied everything form the old computer, or your backup copy of the old computer, to your new one first. -
Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?
P.s. it is now going to apple logo on white screen then switches off
-
My macbook pro 13" unibody has randomly shut down, and will not switch on again, it is totally unresponsive. I have tried using different chargers, and my laptop had charge when it shut down,
Hey Sarahbetts,
Thanks for the question. If I understand correctly, the MacBook will not turn on. I would recommend that you read this article, it may be able to help the issue.
Troubleshooting: My computer won't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
my iphone 5 will not turn on. i want to save all my pictures and videos to my laptop but i cannot do it as my iphone will not switch on. how do i get them?
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please
Just read that someone had the same problem on 3gs and someone had replied to press the home button and power button at same time, so I tried this and within a few seconds my phone had switched itself back on.
-
I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac. I have just backed the phone up on my laptop but am not sure what I need to do now. I do not want to loose any contacts, emails or photos from my phone when I change sync computers. Can anyone assist with a step by step guide as to how to achieve this oucome? Thanks in advance.
Have you read this?
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
Switch 101: Migrate your Windows files or system to your Mac
http://support.apple.com/kb/HT2518 -
My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?
Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
Thanks! -
FaceTime won't start because my camera is not switched on. How do I switch the camera on? Am using Mavericks on a MacBook Pro
You're most welcome, FlutePixzy!
FlutePixzy wrote: ... Apple Care netted nothing... Except they noted I have an older laptop...
If your older laptop meets Apple's published minimum OS X Mavericks: System Requirements, Apple technicians can make it work on your older laptop (if you decide that any service cost is worth the expense.) If so, call Apple Care again and politely ask them how to proceed. Ask to speak with a supervisor or manager if you don't get satisfaction. Limit the discussion to your Mac's problem(s).
Your assessment of Apple's shortcomings are unlikely to help anything.
Technicians may need to inspect your Mac before they can give you an accurate service cost estimate. There may be a separate charge for the inspection of your older Mac, so ask about that, too, if cost is an issue for you.
Message was edited by: EZ Jim
Mac OSX 10.9 -
Satelite L750 does not switch to headphone automatically
I was messing around with the audio on the laptop, and now when i plug in a headphone into the jack socket the laptop will not switch automatically to the new output device.
The only way i have found out to switch it was to change it to the default audio, but i have to switch it back when I'm finished.
Is there anyway for it to switch when it discovers that a new output audio device is discovered.
Thanks danCould this thread be useful?
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=256895
Go to control panel -> Realtek HD audio Manger
In the top right corner, there's a little yellow folder called "Connector Settings.
There, you can find setting "Enable pop-up dialog, when device is plugged in.
Plug in an headphones and select the option "headphone". Then the sound comes out only through the headphones -
S10-2 FN+F5 not switching WIFI ON/OFF, BIOS Issue? Broadcom
Hi all,
I've spent the better part of the day researching this issue, and haven't seen much documentation. I have a early 2010 S10-2, 6 Cell in white. 160gb HDD, 1G Ram. Basically exactly as factory. Over the last year the wifi card was not turning on, so I just kind of left it in the corner and used my older macbook more.
Now I need another machine for someone, so I'm getting the lenova back up and on its legs. On investigating what my wifi troubles seem to be, this is what I have determined.
Win 7 Recognizes card, and says is working normally
Win 7 Diagnostics recommend I 'switch on the card'
Installed driver from Lenova site (most recent)
Installed driver from Broadcom site (most recent)
All of this and the card remained 'off' with the Wifi status LED remained off (unlit).
The switch (physical) is in the correct position. (I have tapped FN+F5 with no change) in Win 7.
I then, powered 7 all the way off, and booted to Quick Start. The QS OS recognized the card, but said it was switched off. Also the checkbox to activate the card was unchecked. I checked it. Then, pressed FN+F5 and the wifi card toggled on, saw my wifi networks, and I connected to one.
If I boot out of QS, and into Windows 7, the wifi card remains on, and I can scan, attach and use networks. FN+F5 will not turn the wifi card off (change its state from on to off).
If I power off, and remove the battery, and start back up, I get back to Windows 7 with the wifi card off, and FN+F5 unresponsive. I have to go back through QS, turn the card on, then into 7.
I searched, and found the FN key is actually a function of the bios, not the microcontroller in lenovas, so I upgraded the BIOS, but that has not changed the issue. Tech support told me that my warranty was out of date, so they can't help.
Any one else experienced a similar issue? Of FN+F5 not changing the state? Is there a fix? I am bothered by this because this is supposed to be my rough and ready travel laptop, and also is used by the very basic users, who often have trouble with computers, so I'd like it to be as fool proof as possible (ie, not switching through QS to activate the card, then onto 7).
I am subscribed, and will reply.
Thanks in advance,
John
(Sidebar, anyone noticed a substantial increase from an SSD and 2gb ram in this machine?)Right now I am preferring to keep QS supported and on for two reasons.
First, its provided an older user a very simple and safe interface for getting to a web browser.
Second, its allowing me to activate the wifi card on, since the QS session will register my FN+F5 keypress.
If I exit QS to Windows 7, it will keep the wifi card on.
Though, on more testing, the card has practically no range, or reliability when being moved, and is having trouble making large downloads (trying to grab ubuntu wubi package right now).
Thinking this might just be hardware, though it still doesn't make full sense why I don't have toggle control in 7. Do you have a recommendation for a wifi card? All the cards I found on newegg seemed to be half as tall as needed, and subsequently would not mount in the case correctly. I could not find a 'spec' on the card size, if you would call it that, to limit and filter my searches by. -
MacBook White not switching on
Hi, I'm using MacBook white 2009 model, my MacBook is not switching on there is no sign of grey screen or start up sound or fan and hard disk sound or system on indication (White) light.my laptop battery is fulll and moreover I connected to power cable.
I tried all possible cases described in apple site like removing all external devices, removing battery , removing rams and hard disk, resetting prom , resetting smc.
Is there any thing I should try before going to apple show room.Yes. Replace the motherboard or the computer.
-
HELP! My MacBook Air does not switch on at all
My MacBook Air does not switch on at all. I press the "switch on" button but nothing happens. The battery is fully charged and the laptop is absolutely new (2 month of rare use). Have no idea what's wrong with it.
Thanks in advance.Hi Aliyusha,
welcome to the forums. I'm sorry to hear about your computer issues.
Do you get a chime? dose the sleep led turn on or blink? What about the led on the power adapter, that LED on or off?
Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713
Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964 -
Equium L10 -200 - Will not switch on
HI,
My laptop will not power up, it will not switch on at all.
I charged it for over 12 hours, but still it would not power up.
The light that indicates that a charger is plugged in doesn't even come on.
The charger is fine, as I was able to charge an older laptop wih it.
Any help would be appreciated, many thanks.
hkIf removing the battery doesnt fix the problem, then there is no easy way of fixing it. The mainboard needs replacing.
ASP = Authorized Service Center
Maybe you are looking for
-
My itunes no longer recognises my ipod nano and won't sync. Any advice?
My ipod nano is no longer recognised by itunes and won't sync. Itunes is on a Window 8 computer and while windows sees the device, itunes won't? Any advice?
-
Audio not working in media applications
So my audio works, all the little kde sound affects are there. but when I try to open a file in kaffiene or amarok it says "all audio drivers failed to initialize" or something along those lines. I don't know what else to do
-
Hi everyone, One of the agencies I work with has a client who wishes XPS for web development. The native application files are InDesign and the agency has used the XPS driver. They have been successful exporting from InDesign and PDF to XPS, but the
-
Local data persistence in Interactive workflows
I have read through all the threads regarding Data persistence and do understand that form data is stored in xml format. I still have the following doubt: For all the custom workflows we are developing for this client (using Adobe interactive forms a
-
With the Ipod touch it requires 3 x clicking to the touch screen rather than 1 for all interactions. I have updated software, all apps, rebooted and reset but still doing it. Any suggestions very welcome.