Laptop keyboard stopped working suddenly
my laptop keyboard has stopped workin suddenly... i was entaered pasword and as the desktop opened the keyboard working stopped, my notebook is Pavillion-g6 2136tx and i've installed windows 8 os. please help me as soon as possible......
Hi,
Try the following.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to see if this will launch the Start-up Menu - if it does, select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
[SOLVED] Laptop keyboard stopped working. Not even in BIOs or LiveCd..
Solution posted below, in #3
===================================
ORIGINAL POST
===================================
Ok, so, my laptop seems fried in the sense that I cannot type with the keyboard no matter what media I use. I've tried LiveCDs, LiveUSB images, my regular internal HDD.. nothing seems to work.
History of Issue: I did a fresh install and immediately installed the kernel26-bfs kernel image. All went well. I tested a few things and did another fresh install (just because I like having a clean slate when experimenting) and installed the kernel26-bfs kernel image again. All seemed fine. Rebooted, shutdown and power upped a few times. Still good, so I shut down the laptop for the day and went to bed. (changed NO config files) Next morning I woke up and turned on the computer, which took a lot longer than usual. I found that when prompted at Lilo boot screen I couldn't type "bfs" (my kernel image named) but it ended up booting it anyway (after 50 seconds) since it was my default image. During the startup sequence it freaks out and kernel panics, trying to look for "device 802", whatever the heck that is. I don't know where it got that from since I had rebooted, etc, the previous day where it looked for "device /dev/sda2". So it shows a bunch of "kernel panic" lines and comes to a halt.
Here's what it says when it boots, where the errors come in:
Waiting 10 seconds for device 802..
Root device '802' doesn't exist. Attempting to create it
/bin/mknod /dev/root b 8 2
:: Initramfs Completed - control passing to kinit
IP-Config: no device to configure
Waiting 0 s before mounting root device...
kinit: Unable to mount root fs on device dev(8,2)
kinit: init not found!
Kernel panic - not syncing: Attempted to kill init!
Pid: 1, comm: kinit Not tainted 2.6.30-ARCH #1
Call Trace:
[<ffffffff8054d401>] ? panic+0x9a/0x154
[<ffffffff8025b59c>] ? exit_ptrace+0xbc/0x160
[<ffffffff80253be2>] ? do_exit+0x6f2/0x7d0
[<ffffffff80253df2>] ? sys_exit+0x22/0x30
[<ffffffff8020c442>] ? system_call_fastpath+0x16/0x1b
That's what the kernel says, anyway. This could be the issue for my HARDWARE? Even without trying to boot Arch, I'm still unable to type. So,....
Anyway, I manually had to power down my laptop and I put in a LiveCD (Knoppix), it still wouldn't let me type with my keyboard, so I had to manually power down again. I tried the Arch LiveUSB image. Still nothing. I tried everything I could think of. I can't even hit the F9, F10, etc, keys during laptop start to enter my BIOS. I noticed a weird delay that I never had before. Usually when I start my laptop it would show the Hewlett-Packard BIOS Help screen immediately, but during that first morning when things went awry, it delays about 10-15 whole seconds before showing the HP screen.
SO, my question is... does it seem like my laptop had a hardware failure? Or do you think my MBR was seriously 'harmed' somehow? I can't access any log files seeing as I can't TYPE anything on that laptop. So, I'm kind of screwed when it comes to providing detail. I've had this laptop about 8 months, new w/o box, or so they say.. I may end up getting a new laptop if I can't fix this.
Last edited by milomouse (2009-11-23 20:24:10)Ok, I guess it was a BIOS and/or motherboard related issue. How I solved this (for future readers of this issue) is by taking out the battery-pack and leaving it out for about 5 minutes, then, right before I put the battery-pack back in, I hold the Power button on my laptop (without the battery in it) for about 30 seconds, then I put the battery-pack into my laptop again and Power it on. The laptop boots quickly and I'm able to use keyboard again to enter BIOs and/or enter my Arch partition using LiLo. This solution was a way of resetting the motherboard.
I'm marking this solved as this solution solved my situation. May not be for everyone. Thanks for your help MadTux. Topic can be closed if needed.
Last edited by milomouse (2009-11-23 20:29:34) -
Half of keyboard stopped working.
Half of my Compaq V6000T laptop keyboard stopped working this morning- the right half. A USB keyboard works without issue. Will replacing the keyboard be sufficient or is there an underlying issue here?
Many thanks!Follow this tutorial until you see that you remove the keyboard. http://www.insidemylaptop.com/disassemble-compaq-presario-v6000-laptop/ Make sure to keep track of all screws and parts, and be careful not to shock your laptop with static electricity! When the keyboard is removed check to see that the wire that plugs in is seated properly; you may want to clean it off a bit or unplug it and plug back in.
<<--Kudos
Please give Kudos. What other kind of recognition could I get?
Have I solved your problem? Mark solution as accepted.
I try to hate Macintosh. I really do. But I can't bring myself to hate any electronic device. -
I own a HP Pavilion dv6915nr, it stopped working suddenly.
Hello,
HP Pavilion dv6915nr.
Windows Vista home premium 32-bit.
I own a HP Pavilion dv6915nr, it stopped working suddenly last night. It was working perfectly, I was watching a video on HULU and I stepped away for 2 or 3 minutes, when I came back the screen was off. The laptop seemed to be on sleep, but when I tried to use it again it didn't do anything. When I try to turn it on the keyboard lights turn on for about 2 seconds, then it goes completely off and there is a faint cracking sound on the speaker bar.
I already tried taking the batteries off and using the AC/DC adapter only, it did not work. When I plug-in the AC/DC adapter the light around the power connector turns on.
Hope someone could help me. Thanks.Try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Laptop Keyboard doesnot work after grub
Hello,
My laptop's keyboard stops working after i select distro from grub menu. I've did huge amount of search but i'm hopeless right now.
I'm using a usb keyboard and it works fine, my laptop's keyboard also works fine in windows and boot menu.
I have x86-input-evdev and -keyboard for sure.
I'm using SLIM+ i3w if you need this!
What to do and where to go?!
any way if u need my dmesg here it is:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.3-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Fri Jul 26 17:13:15 CEST 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f68ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f690000-0x000000005f699fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005f69a000-0x000000005f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: LG Electronics LS75-25JLCE5/HUNTER, BIOS HURFSF07 09/28/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x5f690 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x00849000, 0x00849fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3750f000-0x377fda6a]
[ 0.000000] Move RAMDISK from [mem 0x37a12000-0x37d00a6a] to [mem 0x3750f000-0x377fda6a]
[ 0.000000] ACPI: RSDP 000f65b0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 5f690af0 0004C (v01 PTLTD HunterFL 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 5f699e88 00074 (v01 LGE HunterFL 06040000 LGE 0000005F)
[ 0.000000] ACPI: DSDT 5f691a5d 0842B (v01 LGE HUNTER 06040000 INTL 20030224)
[ 0.000000] ACPI: FACS 5f6aafc0 00040
[ 0.000000] ACPI: APIC 5f699efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
[ 0.000000] ACPI: HPET 5f699f64 00038 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
[ 0.000000] ACPI: MCFG 5f699f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F)
[ 0.000000] ACPI: BOOT 5f699fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 5f69182f 0022E (v01 SataRe SataAhci 00001000 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f69135a 004D5 (v01 LGE HNT_IGFX 00001000 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f690f15 00277 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f690d55 001C0 (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 5f690b3c 00219 (v01 PmRef CpuPm 00003000 INTL 20030224)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 638MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0084a000, 0x0084afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x5f68ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5f68ffff]
[ 0.000000] On node 0 totalpages: 390702
[ 0.000000] free_area_init_node: node 0, pgdat c06af240, node_mem_map f691f020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1278 pages used for memmap
[ 0.000000] HighMem zone: 163474 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f68fa000 s33472 r0 d23872 u57344
[ 0.000000] pcpu-alloc: s33472 r0 d23872 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 388926
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b68b701a-eb23-4df9-b3c8-ec3497d5f78f ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3126392 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005f690)
[ 0.000000] Memory: 1536040k/1563200k available (4154k kernel code, 26768k reserved, 1734k data, 596k init, 653896k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc06c1000 - 0xc0756000 ( 596 kB)
.data : 0xc050e91e - 0xc06c0300 (1734 kB)
.text : 0xc0100000 - 0xc050e91e (4154 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.042 MHz processor
[ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.25 BogoMIPS (lpj=6206806)
[ 0.003339] pid_max: default: 32768 minimum: 301
[ 0.003390] Security Framework initialized
[ 0.003401] AppArmor: AppArmor disabled by boot time parameter
[ 0.003415] Mount-cache hash table entries: 512
[ 0.003697] Initializing cgroup subsys memory
[ 0.003710] Initializing cgroup subsys devices
[ 0.003713] Initializing cgroup subsys freezer
[ 0.003715] Initializing cgroup subsys net_cls
[ 0.003718] Initializing cgroup subsys blkio
[ 0.003751] Disabled fast string operations
[ 0.003759] mce: CPU supports 5 MCE banks
[ 0.003768] CPU0: Thermal monitoring enabled (TM1)
[ 0.003779] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.010647] ACPI: Core revision 20130328
[ 0.016690] ACPI: All ACPI Tables successfully acquired
[ 0.020010] ftrace: allocating 18608 entries in 37 pages
[ 0.026776] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061246] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
[ 0.063333] Performance Events: p6 PMU driver.
[ 0.063333] ... version: 0
[ 0.063333] ... bit width: 32
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 00000000ffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 0
[ 0.063333] ... event mask: 0000000000000003
[ 0.076681] Brought up 1 CPUs
[ 0.076684] smpboot: Total of 1 processors activated (3725.25 BogoMIPS)
[ 0.077871] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.078028] devtmpfs: initialized
[ 0.078311] PM: Registering ACPI NVS region [mem 0x5f69a000-0x5f6fffff] (417792 bytes)
[ 0.079835] RTC time: 0:17:13, date: 08/01/13
[ 0.079897] NET: Registered protocol family 16
[ 0.080138] ACPI: bus type PCI registered
[ 0.080221] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080225] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.080227] PCI: Using MMCONFIG for extended config space
[ 0.080229] PCI: Using configuration type 1 for base access
[ 0.081113] bio: create slab <bio-0> at 0
[ 0.081231] ACPI: Added _OSI(Module Device)
[ 0.081234] ACPI: Added _OSI(Processor Device)
[ 0.081237] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.081239] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.082662] ACPI: EC: Look up EC in DSDT
[ 0.086937] ACPI: Interpreter enabled
[ 0.086956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[ 0.086962] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[ 0.086980] ACPI: (supports S0 S3 S4 S5)
[ 0.086983] ACPI: Using IOAPIC for interrupt routing
[ 0.087016] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.087127] ACPI: No dock devices found.
[ 0.100886] ACPI: Power Resource [CTHT] (off)
[ 0.103939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.104651] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.104655] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.104658] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.104662] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.104665] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.104668] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.104672] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.104675] PCI: root bus 00: using default resources
[ 0.104777] PCI host bridge to bus 0000:00
[ 0.104781] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.104785] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.104788] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.104800] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.104921] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.104933] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
[ 0.104939] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
[ 0.104946] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.104953] pci 0000:00:02.0: reg 1c: [mem 0xb0040000-0xb007ffff]
[ 0.105035] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.105045] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
[ 0.105212] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[ 0.105235] pci 0000:00:1b.0: reg 10: [mem 0xb0000000-0xb0003fff 64bit]
[ 0.105333] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.105390] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.105451] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.105553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.105593] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.105654] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
[ 0.105755] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.105803] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.105861] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.105915] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.106742] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.106797] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.106852] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.106930] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.106985] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.107039] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.107119] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.107171] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.107225] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.107306] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.107374] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.107398] pci 0000:00:1d.7: reg 10: [mem 0xb0004000-0xb00043ff]
[ 0.107497] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.107550] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.107609] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.107721] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.107778] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.107883] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.107889] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.107896] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0300-030f
[ 0.107987] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.108004] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.108016] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.108029] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.108041] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.108053] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.108175] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.108246] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.108477] pci 0000:02:00.0: [11ab:4351] type 00 class 0x020000
[ 0.108510] pci 0000:02:00.0: reg 10: [mem 0xb4000000-0xb4003fff 64bit]
[ 0.108527] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.108674] pci 0000:02:00.0: supports D1 D2
[ 0.108677] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.108734] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.110062] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.110076] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.110082] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.110087] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.110096] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.110182] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.110188] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.110193] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
[ 0.110202] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.110279] pci 0000:06:00.0: [104c:8031] type 02 class 0x060700
[ 0.110305] pci 0000:06:00.0: reg 10: [mem 0xfedff000-0xfedfffff]
[ 0.110347] pci 0000:06:00.0: supports D1 D2
[ 0.110350] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.110429] pci 0000:06:00.2: [104c:8032] type 00 class 0x0c0010
[ 0.110455] pci 0000:06:00.2: reg 10: [mem 0xbc006000-0xbc0067ff]
[ 0.110469] pci 0000:06:00.2: reg 14: [mem 0xbc000000-0xbc003fff]
[ 0.110572] pci 0000:06:00.2: supports D1 D2
[ 0.110575] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
[ 0.110654] pci 0000:06:00.3: [104c:8033] type 00 class 0x018000
[ 0.110680] pci 0000:06:00.3: reg 10: [mem 0xbc004000-0xbc005fff]
[ 0.110790] pci 0000:06:00.3: supports D1 D2
[ 0.110793] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
[ 0.110870] pci 0000:06:00.4: [104c:8034] type 00 class 0x080500
[ 0.110896] pci 0000:06:00.4: reg 10: [mem 0xbc007000-0xbc0070ff]
[ 0.110911] pci 0000:06:00.4: reg 14: [mem 0xbc006c00-0xbc006cff]
[ 0.110925] pci 0000:06:00.4: reg 18: [mem 0xbc006800-0xbc0068ff]
[ 0.111013] pci 0000:06:00.4: supports D1 D2
[ 0.111016] pci 0000:06:00.4: PME# supported from D0 D1 D2 D3hot
[ 0.111098] pci 0000:06:02.0: [8086:4220] type 00 class 0x028000
[ 0.111124] pci 0000:06:02.0: reg 10: [mem 0xbc008000-0xbc008fff]
[ 0.111236] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 0.111354] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.111362] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
[ 0.111371] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.111374] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.111379] pci 0000:06:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.111448] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
[ 0.111455] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[ 0.111459] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
[ 0.111464] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
[ 0.111487] pci_bus 0000:00: on NUMA node 0
[ 0.111491] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.111495] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.111688] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
[ 0.111768] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15)
[ 0.111846] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
[ 0.111924] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
[ 0.112001] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
[ 0.112082] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
[ 0.112159] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
[ 0.112238] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10
[ 0.113690] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.113703] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.113752] Found 1 acpi root devices
[ 0.113811] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.113894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.113899] vgaarb: loaded
[ 0.113901] vgaarb: bridge control possible 0000:00:02.0
[ 0.113956] PCI: Using ACPI for IRQ routing
[ 0.123744] PCI: pci_cache_line_size set to 64 bytes
[ 0.123813] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.123815] e820: reserve RAM buffer [mem 0x5f690000-0x5fffffff]
[ 0.123948] NetLabel: Initializing
[ 0.123950] NetLabel: domain hash size = 128
[ 0.123952] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.123968] NetLabel: unlabeled traffic allowed by default
[ 0.124001] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.124008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.124013] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.126058] Switching to clocksource hpet
[ 0.130773] pnp: PnP ACPI init
[ 0.130800] ACPI: bus type PNP registered
[ 0.131416] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.131421] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.131425] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.131429] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.131432] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.131436] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.131442] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.131661] pnp 00:01: [dma 4]
[ 0.131697] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.131737] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.131879] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.131929] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.132035] system 00:05: [io 0x0300-0x030f] has been reserved
[ 0.132039] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.132042] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.132046] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.132050] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.132113] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.132390] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.133678] pnp 00:08: [dma 1]
[ 0.133784] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.134099] pnp 00:09: [dma 3]
[ 0.134174] pnp 00:09: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[ 0.134235] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.134282] pnp 00:0b: Plug and Play ACPI device, IDs SYN1301 PNP0f13 (active)
[ 0.134310] pnp: PnP ACPI: found 12 devices
[ 0.134312] ACPI: bus type PNP unregistered
[ 0.171975] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.171980] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.171985] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.171989] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.171994] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06] add_size 4000000
[ 0.172003] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.172007] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.172014] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.172018] pci 0000:00:02.1: BAR 0: assigned [mem 0x64000000-0x6407ffff]
[ 0.172025] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.172029] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.172033] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.172040] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.172046] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.172055] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.172059] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.172066] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
[ 0.172072] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.172083] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.172087] pci 0000:06:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.172090] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.172093] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.172097] pci 0000:06:00.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
[ 0.172102] pci 0000:06:00.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
[ 0.172105] pci 0000:06:00.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.172108] pci 0000:06:00.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.172112] pci 0000:06:00.0: CardBus bridge to [bus 07-0a]
[ 0.172115] pci 0000:06:00.0: bridge window [io 0x4000-0x40ff]
[ 0.172122] pci 0000:06:00.0: bridge window [io 0x4400-0x44ff]
[ 0.172128] pci 0000:06:00.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.172135] pci 0000:06:00.0: bridge window [mem 0x68000000-0x6bffffff]
[ 0.172141] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.172145] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.172152] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
[ 0.172158] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
[ 0.172482] pci 0000:00:1e.0: setting latency timer to 64
[ 0.172565] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.172568] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.172571] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.172575] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
[ 0.172578] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.172581] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.172585] pci_bus 0000:04: resource 1 [mem 0xb8000000-0xbbffffff]
[ 0.172588] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.172591] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.172594] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xbc0fffff]
[ 0.172598] pci_bus 0000:06: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.172601] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.172604] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.172607] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
[ 0.172610] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
[ 0.172613] pci_bus 0000:07: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.172617] pci_bus 0000:07: resource 3 [mem 0x68000000-0x6bffffff]
[ 0.172672] NET: Registered protocol family 2
[ 0.172896] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.172951] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.173002] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.173041] TCP: reno registered
[ 0.173044] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.173060] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.173150] NET: Registered protocol family 1
[ 0.173167] pci 0000:00:02.0: Boot video device
[ 0.174673] PCI: CLS 32 bytes, default 64
[ 0.174731] Unpacking initramfs...
[ 0.263828] Freeing initrd memory: 3004k freed
[ 0.266187] Simple Boot Flag at 0x39 set to 0x1
[ 0.266287] apm: BIOS not found.
[ 0.266346] Scanning for low memory corruption every 60 seconds
[ 0.266796] audit: initializing netlink socket (disabled)
[ 0.266816] type=2000 audit(1375316232.266:1): initialized
[ 0.281831] bounce pool size: 64 pages
[ 0.281845] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.284147] VFS: Disk quotas dquot_6.5.2
[ 0.284226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.284495] msgmni has been set to 1728
[ 0.284769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.284804] io scheduler noop registered
[ 0.284806] io scheduler deadline registered
[ 0.284852] io scheduler cfq registered (default)
[ 0.284987] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.285087] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.285270] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.285273] vesafb: scrolling: redraw
[ 0.285276] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.285482] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.315579] Console: switching to colour frame buffer device 128x48
[ 0.345515] fb0: VESA VGA frame buffer device
[ 0.345558] intel_idle: does not run on family 6 model 13
[ 0.345597] GHES: HEST is not enabled!
[ 0.345617] isapnp: Scanning for PnP cards...
[ 0.658543] isapnp: No Plug & Play device found
[ 0.658601] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.679337] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.680017] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.684556] i8042: Detected active multiplexing controller, rev 1.1
[ 0.686055] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.686096] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.686128] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.686159] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.686194] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.686311] mousedev: PS/2 mouse device common for all mice
[ 0.686409] rtc_cmos 00:06: RTC can wake from S4
[ 0.686571] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.686605] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.686637] cpuidle: using governor ladder
[ 0.686639] cpuidle: using governor menu
[ 0.686687] drop_monitor: Initializing network drop monitor service
[ 0.686801] TCP: cubic registered
[ 0.686956] NET: Registered protocol family 10
[ 0.687187] NET: Registered protocol family 17
[ 0.687199] Key type dns_resolver registered
[ 0.687333] Using IPI No-Shortcut mode
[ 0.687439] PM: Hibernation image not present or could not be loaded.
[ 0.687450] registered taskstats version 1
[ 0.687968] Magic number: 9:800:252
[ 0.687999] pci 0000:00:1d.0: hash matches
[ 0.688056] rtc_cmos 00:06: setting system clock to 2013-08-01 00:17:13 UTC (1375316233)
[ 0.688187] Freeing unused kernel memory: 596k freed
[ 0.688527] Write protecting the kernel text: 4156k
[ 0.688561] Write protecting the kernel read-only data: 1316k
[ 0.693760] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.699029] systemd-udevd[38]: starting version 204
[ 0.749237] ACPI: bus type USB registered
[ 0.749277] usbcore: registered new interface driver usbfs
[ 0.749292] usbcore: registered new interface driver hub
[ 0.753176] usbcore: registered new device driver usb
[ 0.753809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.753997] ehci-pci: EHCI PCI platform driver
[ 0.754224] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.754238] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.754248] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.754268] ehci-pci 0000:00:1d.7: debug port 1
[ 0.757154] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.761830] sdhci: Secure Digital Host Controller Interface driver
[ 0.761835] sdhci: Copyright(c) Pierre Ossman
[ 0.762138] sdhci-pci 0000:06:00.4: SDHCI controller found [104c:8034] (rev 0)
[ 0.762387] mmc0: SDHCI controller on PCI [0000:06:00.4] using PIO
[ 0.763154] mmc1: SDHCI controller on PCI [0000:06:00.4] using PIO
[ 0.763242] mmc2: SDHCI controller on PCI [0000:06:00.4] using PIO
[ 0.767069] SCSI subsystem initialized
[ 0.769405] ACPI: bus type ATA registered
[ 0.769889] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.769918] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0004000
[ 0.776689] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.776917] hub 1-0:1.0: USB hub found
[ 0.776924] hub 1-0:1.0: 8 ports detected
[ 0.777495] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.777500] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.777510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.777540] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.777717] hub 2-0:1.0: USB hub found
[ 0.777722] hub 2-0:1.0: 2 ports detected
[ 0.777972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.777976] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.777984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.778025] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.778188] hub 3-0:1.0: USB hub found
[ 0.778193] hub 3-0:1.0: 2 ports detected
[ 0.778441] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.778446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.778453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.778492] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.778666] hub 4-0:1.0: USB hub found
[ 0.778671] hub 4-0:1.0: 2 ports detected
[ 0.778926] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.778930] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.778938] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.778966] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.779135] hub 5-0:1.0: USB hub found
[ 0.779140] hub 5-0:1.0: 2 ports detected
[ 0.779655] libata version 3.00 loaded.
[ 0.780086] ata_piix 0000:00:1f.1: version 2.13
[ 0.780279] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.783440] scsi0 : ata_piix
[ 0.786084] scsi1 : ata_piix
[ 0.786168] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.786171] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.786694] tifm_core: MMC/SD card detected in socket 0:3
[ 0.786781] ata2: port disabled--ignoring
[ 0.823446] firewire_ohci 0000:06:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.950540] ata1.00: ATA-7: FUJITSU MHV2080AT PL, 000000A0, max UDMA/100
[ 0.950544] ata1.00: 156301488 sectors, multi 16: LBA
[ 0.950557] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4082N, HH02, max UDMA/33
[ 0.963752] ata1.00: configured for UDMA/100
[ 0.976914] ata1.01: configured for UDMA/33
[ 0.979353] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
[ 0.982892] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N HH02 PQ: 0 ANSI: 5
[ 0.986322] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.986396] sd 0:0:0:0: [sda] Write Protect is off
[ 0.986400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.986430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.080286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.080290] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.080606] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.108366] sda: sda1 < sda5 > sda2 sda3 sda4
[ 1.109847] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.190025] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 1.266683] tsc: Refined TSC clocksource calibration: 1861.999 MHz
[ 1.266690] Switching to clocksource tsc
[ 1.317249] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1.317314] scsi2 : usb-storage 1-5:1.0
[ 1.317597] usbcore: registered new interface driver usb-storage
[ 1.323429] firewire_core 0000:06:00.2: created device fw0: GUID 6600774200e09104, S400
[ 1.420016] usb 1-6: new high-speed USB device number 5 using ehci-pci
[ 1.546136] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 1.546307] scsi3 : usb-storage 1-6:1.0
[ 1.770014] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 1.949297] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.961728] usbcore: registered new interface driver usbhid
[ 1.961731] usbhid: USB HID core driver
[ 2.148459] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.173364] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 2.320861] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.62 PQ: 0 ANSI: 0
[ 2.323718] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.323862] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 2.547488] scsi 3:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
[ 2.548846] sd 3:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
[ 2.549467] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.549470] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2.550095] sd 3:0:0:0: [sdb] No Caching mode page present
[ 2.550415] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2.554343] sd 3:0:0:0: [sdb] No Caching mode page present
[ 2.554659] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2.727731] sdb: sdb1
[ 2.729968] sd 3:0:0:0: [sdb] No Caching mode page present
[ 2.730299] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 2.731468] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 3.120230] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.159302] systemd[1]: Set hostname to <ighost>.
[ 3.828104] systemd[1]: Cannot add dependency job for unit acpid.service, ignoring: Unit acpid.service failed to load: No such file or directory. See system logs and 'systemctl status acpid.service' for details.
[ 3.828451] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.828515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.828533] systemd[1]: Starting Remote File Systems.
[ 3.828551] systemd[1]: Reached target Remote File Systems.
[ 3.828567] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.828615] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.828630] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.828661] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.828675] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.828705] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.828719] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.828753] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.828772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.828816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.828830] systemd[1]: Starting Paths.
[ 3.828845] systemd[1]: Reached target Paths.
[ 3.828861] systemd[1]: Starting Journal Socket.
[ 3.828922] systemd[1]: Listening on Journal Socket.
[ 3.828942] systemd[1]: Starting Setup Virtual Console...
[ 3.829541] systemd[1]: Starting Create static device nodes in /dev...
[ 3.859627] systemd[1]: Starting Apply Kernel Variables...
[ 3.860503] systemd[1]: Mounting Huge Pages File System...
[ 3.860890] systemd[1]: Starting Journal Service...
[ 3.861380] systemd[1]: Started Journal Service.
[ 3.861499] systemd[1]: Starting udev Kernel Socket.
[ 3.861542] systemd[1]: Listening on udev Kernel Socket.
[ 3.861615] systemd[1]: Starting udev Control Socket.
[ 3.861652] systemd[1]: Listening on udev Control Socket.
[ 3.861722] systemd[1]: Starting udev Coldplug all Devices...
[ 3.862166] systemd[1]: Mounting Debug File System...
[ 3.862572] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.862944] systemd[1]: Starting Encrypted Volumes.
[ 3.862964] systemd[1]: Reached target Encrypted Volumes.
[ 3.863003] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.863164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.879599] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.914088] systemd[1]: Starting Load Kernel Modules...
[ 3.914616] systemd[1]: Expecting device dev-disk-by\x2duuid-9fa4ccc9\x2d879c\x2d42b0\x2d8c42\x2d39ff67b9bf38.device...
[ 3.914650] systemd[1]: Started File System Check on Root Device.
[ 3.914670] systemd[1]: Mounting Temporary Directory...
[ 3.930156] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.930608] systemd[1]: Expecting device dev-disk-by\x2duuid-BAA022C6A0228949.device...
[ 3.930627] systemd[1]: Expecting device dev-disk-by\x2duuid-42143f2b\x2d29c6\x2d4174\x2dab7b\x2dfb1600c601e6.device...
[ 5.034037] FS-Cache: Loaded
[ 5.056025] RPC: Registered named UNIX socket transport module.
[ 5.056030] RPC: Registered udp transport module.
[ 5.056032] RPC: Registered tcp transport module.
[ 5.056034] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.158185] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.291383] systemd-udevd[105]: starting version 204
[ 5.355353] FS-Cache: Netfs 'nfs' registered for caching
[ 6.472733] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 6.472878] ACPI: Lid Switch [LID0]
[ 6.474425] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 6.474491] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 6.475351] ACPI: Requesting acpi_cpufreq
[ 6.475712] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.475718] ACPI: Power Button [PWRB]
[ 6.475794] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 6.475798] ACPI: Sleep Button [SLPB]
[ 6.477173] ACPI: AC Adapter [AC] (on-line)
[ 6.524341] tsc: Marking TSC unstable due to TSC halts in idle
[ 6.525067] ACPI: acpi_idle registered with cpuidle
[ 6.525459] ACPI: Battery Slot [CMB0] (battery absent)
[ 6.525775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.525782] ACPI: Power Button [PWRF]
[ 6.529302] Switching to clocksource hpet
[ 6.623493] wmi: Mapper loaded
[ 6.706893] NET: Registered protocol family 23
[ 6.749372] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227
[ 6.749400] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
[ 6.749418] smsc_ircc_present(), addr 0x06f8 - no device found!
[ 6.752284] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.752364] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[ 6.759649] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.759653] ACPI: Thermal Zone [TZ1] (40 C)
[ 6.761691] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.761694] ACPI: Thermal Zone [TZ2] (55 C)
[ 6.775603] ACPI: Fan [FAN0] (off)
[ 6.868349] sky2: driver version 1.30
[ 6.868486] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
[ 6.868560] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
[ 6.868879] sky2 0000:02:00.0 eth0: addr 00:e0:91:0f:4a:19
[ 6.886311] intel_rng: FWH not detected
[ 7.052962] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[ 7.052973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.052978] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 7.052983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.052985] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[ 7.052990] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.052992] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.106512] Linux agpgart interface v0.103
[ 7.142882] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 7.143028] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 7.144655] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 7.144970] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 7.217080] yenta_cardbus 0000:06:00.0: CardBus bridge found [1854:0028]
[ 7.217106] yenta_cardbus 0000:06:00.0: Using INTVAL to route CSC interrupts to PCI
[ 7.217109] yenta_cardbus 0000:06:00.0: Routing CardBus interrupts to PCI
[ 7.217116] yenta_cardbus 0000:06:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 7.228515] [drm] Initialized drm 1.1.0 20060810
[ 7.266001] cfg80211: Calling CRDA to update world regulatory domain
[ 7.297286] lib80211: common routines for IEEE802.11 drivers
[ 7.297292] lib80211_crypt: registered algorithm 'NULL'
[ 7.301107] [drm] Memory usable by graphics device = 256M
[ 7.301113] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 7.301116] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 7.301141] Console: switching to colour dummy device 80x25
[ 7.301257] i915 0000:00:02.0: setting latency timer to 64
[ 7.302295] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.302300] [drm] Driver supports precise vblank timestamp query.
[ 7.302376] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.316734] libipw: 802.11 data/management/control stack, git-1.1.13
[ 7.316737] libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
[ 7.323825] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 7.323828] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 7.434003] [drm] initialized overlay support
[ 7.447402] yenta_cardbus 0000:06:00.0: ISA IRQ mask 0x0cd8, PCI irq 16
[ 7.447408] yenta_cardbus 0000:06:00.0: Socket status: 30000006
[ 7.447414] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 7.447425] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
[ 7.447429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
[ 7.448715] excluding 0x4000-0x40ff 0x4400-0x44ff
[ 7.454021] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0xbc000000-0xbc0fffff]
[ 7.454026] pcmcia_socket pcmcia_socket0: cs: memory probe 0xbc000000-0xbc0fffff:
[ 7.454030] excluding 0xbc000000-0xbc00ffff
[ 7.454045] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
[ 7.454049] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff:
[ 7.454061] excluding 0x60000000-0x63ffffff
[ 7.457625] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 7.726030] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
[ 7.727184] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[ 7.730133] hid-generic 0003:0518:0001.0002: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input0
[ 7.730188] a4tech 0003:09DA:000A.0001: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
[ 7.732273] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8
[ 7.732416] hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input1
[ 7.797551] ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
[ 7.800799] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 7.893088] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 7.991976] tc1100_wmi: HP Compaq TC1100 Tablet WMI Extras loaded
[ 8.038907] fbcon: inteldrmfb (fb0) is primary device
[ 8.048603] ppdev: user-space parallel port driver
[ 8.059482] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 8.059630] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 8.083387] Console: switching to colour frame buffer device 128x48
[ 8.089032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.089037] i915 0000:00:02.0: registered panic notifier
[ 8.089048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.089555] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 8.110287] systemd-udevd[128]: renamed network interface eth0 to enp2s0
[ 8.123115] iTCO_vendor_support: vendor-support=0
[ 8.199308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 8.200763] excluding 0x170-0x177 0x1f0-0x1f7 0x300-0x30f 0x370-0x37f
[ 8.201559] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 8.201948] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 8.202341] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 8.202952] clean.
[ 8.203000] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 8.204946] clean.
[ 8.205013] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 8.205024] excluding 0xc0000-0xc7fff 0xdc000-0xfffff
[ 8.205096] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 8.205128] clean.
[ 8.205177] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 8.205200] excluding 0x60000000-0x60ffffff
[ 8.205252] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 8.205948] clean.
[ 8.260695] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.260987] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.261238] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.261465] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.261705] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.261931] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.263318] ACPI Warning: 0x000018e0-0x000018ff SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[ 8.263328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.264893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 8.264941] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 8.268408] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.283555] systemd-udevd[123]: renamed network interface eth1 to wlp6s2
[ 8.508098] psmouse serio2: synaptics: Touchpad model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 28762
[ 8.543316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input16
[ 9.444744] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.746168] fuse init (API version 7.22)
[ 9.795856] Adding 2096476k swap on /dev/sda4. Priority:-1 extents:1 across:2096476k FS
[ 10.804356] sky2 0000:02:00.0 enp2s0: enabling interface
[ 10.804455] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 12.524356] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
[ 12.524399] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 15.965900] systemd-logind[185]: Watching system buttons on /dev/input/event5 (Power Button)
[ 15.966015] systemd-logind[185]: Watching system buttons on /dev/input/event2 (Video Bus)
[ 15.966122] systemd-logind[185]: Watching system buttons on /dev/input/event3 (Power Button)
[ 15.966231] systemd-logind[185]: Watching system buttons on /dev/input/event1 (Lid Switch)
[ 15.966337] systemd-logind[185]: Watching system buttons on /dev/input/event4 (Sleep Button)
[ 29.280330] systemd[1]: Unit [email protected] entered failed state.
[ 29.380404] systemd[1]: [email protected] holdoff time over, scheduling restart.
[ 29.383839] systemd[1]: Unit [email protected] entered failed state.
[ 283.968752] sky2 0000:02:00.0 enp2s0: Link is down
[ 288.653377] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
[ 301.725348] sky2 0000:02:00.0 enp2s0: Link is down
[ 303.401808] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
[ 978.946847] usb 1-5: USB disconnect, device number 4
[ 978.952420] cdrom: issuing MRW background format suspend
[36653.884288] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
[36653.884298] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
[36653.884304] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
[36653.884310] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
[36653.983274] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
[36653.983488] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
[40311.593171] sd 0:0:0:0: Attached scsi generic sg0 type 0
[40311.595838] sr 0:0:1:0: Attached scsi generic sg1 type 5
[40311.596002] sd 3:0:0:0: Attached scsi generic sg2 type 0
[43081.692487] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
[43081.983029] EXT4-fs (sda2): re-mounted. Opts: commit=0
[43083.232434] ipw2200: Failed to send POWER_MODE: Command timed out.cfr wrote:
Welcome to the forums.
Have you tried uninstalling xf86-input-keyboard? If you want evdev to handle it, that is.
Does the keyboard work when you decrypt the encryption device (or maybe you use a keyfile)?
Does it work if you boot to the command line?
Is the keyboard hook included in the initramfs? (Though I don't think this should matter for later.)
first place, tnx for the answer and sorry cause it took too long for me to answer back.
I uninstalled xf86-input-keyboard. now i get an error at boot time but it passes to arch so no big deal.
About encryption device I have no idea cause i never chose to encrypt anything.
About working at command line, answer is no. It is not working in my bash and also at tty1.
about keyboard hook, Answer is yes, it is included.
I'm really enjoying my systems speed with arch but this problem is really killing me. Now i'm using my laptop like a PC no movement allowed cause I must take a keyboard with me.
and really, an active forum and just one answer to my question! -
The escape key in my wireless keyboard stopped working
Dear list members, suddenly, the ESC key in my wireless keyboard stopped working. As it looks normal and all other keys are working properly, might it be a configuration problem? Could you please help me? I'm working on an iMac 27 late 2012 running OSX 10.10.2. Thank you.
Please reset the SMC, this may take 2-3 attempts and post back with the results.
iMac SMC and PRAM reset -
I own lenovo g505 laptop and my keyboard stop working again the first time I fix it by restarting my laptop but now it has start doing it again and restarting/shutdown not helping any fix? and no I did not spill any liquids on it.
That could be a loose ribbon cable or hardware fault, I assume your laptop is still under warranty, If so you should return your laptop to the place of purchase for replacement or repair.
Edit: Before returning, Backup all your data to external drive using onekey recovery, Power off your laptop, Press onekey recovery (Small button to the right of power button), This will list some options scroll down to recovery & tap return key. This will re-install windows on your laptop, Once installed open wordpad or something smililar & test your keyboard. If your keyboard works after the fresh install restore your backed up files using onekey restore.
Hope that helps
Catt -
After updates, wireless keyboard stopped working.
HI...
All was going along swimmingly, setting up my new iMac... I did some updates and then for some strange reason my wireless keyboard stopped working? I know it’s not the keyboard because delete works, my widgets work and some other keys work - and - the whole keyboard was working from start up (at first)...
But I just can’t use the Alfa keys all of a sudden - very unusual, no?
What happened?
Any opinions, suggestions and comments are greatly welcomed
Thank you in advance....For those who it may concern...
I called up support and I had to delete two files from the Systems Library called “com.apple...systempreferences.plist” and “com.apple.universalaccess.plist”.....
I hope you never need this information but - it worked for me.... -
Integrated microphone stopped working suddenly on my HP i-7 DV6! I tried everything!
Hi guys! Thanks to anyone seeing this. My laptop's integrated microphone stopped working suddenly. I have daily skype meetings and it worked perfectly fine but today it suddenly didn't work. I didn't make any significant changes before that.
I tried uninstalling and installing the drivers from the website but when I uninstalled, the new drivers said that a device is missing. I cannot paste the error message exactly how is written for you because it is in greek. but the translation is that a device part is missing or something.
after that I've done a system restore went back 4 days and I have now my drivers back but the microphone still isn't working.
I figured out that if i plug my apple headphones i can hear audio but it doesnt detect my recording. (i dont know if it's supposed to anyway!
Thanks in advance to anyone that might have a solution!
Windows 8
HP Pavilion DV6-2150EV
Product Number: VY101EA#B1A
Serial No.Thank you for this. You are amazing for trying to help me. I kept on not being able to find the solution for 2 days and no voice application worked until yesterday evening. I logged into an online shop and bought a headset costing £10. As long as I entered my details and pressed PAY, my girlfriend called me on skype and voila, she could hear me. I think there might be something wrong with the insides of my laptop! Might be a significant amount of dust and dirt.
Thank you very much again. If this happens again I will read this post again carefully and get back to you.
Best Regards
Michalis Odysseos -
Bluetooth device stopped working suddenly.
Hello,
My bluetooth controller was working till yesterday and stopped working suddenly today i am not sure what caused the problem, I use a bluetooth headset and when i tried to connect it today i saw that it was failing and when i tried to reboot the system then everything is gone, the logs seems to throw some strange errors. Please see my system configuration below.
Linux computergeek 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
I can see the bluetooth device in the "lsusb".
Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Also i can see the "btusb" module is loaded properly and I haven't upgraded my kernel recently.
But "hciconfig" and "hcitool" gives me below error and i cannot bring the hci0 interace up.
[root@computergeek]# hciconfig -a hci0
hci0: Type: BR/EDR Bus: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:3 acl:0 sco:0 commands:4 errors:1
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: SLAVE ACCEPT
[root@computergeek]# hciconfig hci0 up
Can't init device hci0: Connection timed out (110)
[root@computergeek]# hcitool dev
Devices:
From Bluetooth control,
[root@computergeek]# bluetooth
bluetooth = on
[root@computergeek]# bluetoothctl
[bluetooth]# power on
No default controller available
[bluetooth]#
My "dmesg" output says this.
[ 4510.619589] Bluetooth: hci0 urb ffff8800ae373240 failed to resubmit (113)
[ 4510.619959] Bluetooth: hci0 urb ffff8800ae373300 failed to resubmit (113)
I tried every solutions on the other thread but nothing seems to help!
Any help would be greatly appreciated!!
Thanks
Last edited by vpraveenn (2015-02-17 21:05:16)I have the same bluetooth controller (0cf3:3005, Atheros AR3011) on my laptop (ASUS K53SV) and have the exact same problem. Bluetooth works for a while until tx errors start showing up:
[24952.326871] Bluetooth: hci0 command 0x0c1a tx timeout
[24954.332842] Bluetooth: hci0 command 0x0c52 tx timeout
[24956.338826] Bluetooth: hci0 command 0x0c24 tx timeout
[24958.344882] Bluetooth: hci0 command 0x0405 tx timeout
[24993.806536] Bluetooth: hci0 command 0x0408 tx timeout
[25033.899824] Bluetooth: hci0 command 0x0408 tx timeout
[25048.548327] Bluetooth: hci0 command 0x0c14 tx timeout
[25051.014213] Bluetooth: hci0 command 0x0c14 tx timeout
[25075.805968] Bluetooth: hci0 command 0x0408 tx timeout
Resetting the bluetooth device works sometimes but not always. There is always a chance that the device will just become unresponsive to any kinds of commands:
# hciconfig hci0 reset
Can't init device hci0: Connection timed out (110)
I've tried various methods (block/unblock them with rfkill, `rmmod btusb` & `modprobe btusb`, etc) but none works after the device is "dead". The only way to recover seems to be powering off the laptop (simply rebooting doesn't fix the problem).
Last edited by PkmX (2015-02-18 14:55:38) -
Sony vaio SVF14N16SGS TOUCH screen stop working suddenly help me to fix this
hi alli buy sony vaio SVF14N16SGS and calibrate a touch screen i working with laptop but approximately befor 20 minute laptop touch screen stop working suddenly!!!!!!!!!!!!!i am very disapointment from sony Corporation for this bull******e bug please help me to fix iti appreciate it
Hi Jimmy_N,
Thank you for considering Sony Community!
We're sorry to hear this issue. Please follow the troubleshooting steps here to isolate the issue:
Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
Reinstall driver - Go to Device manager -> Human Interface Devices -> right click and select Uninstall (DO NOT DELETE). Restart the computer. The driver will be reinstalled.
Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS go to Exit tab -> Get Default Values -> Save the changes and Exit.
Update drivers from Sony's support website or from where you purchased the laptop.
Your Vaio SVF14N16SGS is not a U.S. model. We do not have the drivers and software that support your computer. For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"
-
Helix keyboard stops working when dock battery reaches 3%
My other post has more details but the title says it all. My Helix keyboard stops working when dock battery reaches 3% even though the tablet battery has a charge. This seems to happen every time. A hard reset of the dock gets the keyboard working again. Any ideas on how to fix this?
This is my daughter's college computer so I have not used it. I just get the panic call when it locks up.
Is there any way to get a warning when the battery is low? I assume that it has a light on the base but I can see how she could miss it when focused on what she is doing. I am not sure it comes on since the tablet battery still has capacity. I find it odd that this happens when the tablet battery still has a decent amount of charge. Effectively it eliminates a fair amount of the battery capacity available for the computer.
I have other electronics that force you to shut done at low battery levels. I am surprise that a high end laptop performs this way. -
Mouse and keyboard stop working with Mavericks
This has happened twice now since installing Mavericks.
I'll be working along, and then all of a sudden, I am not able to click with my mouse and my keyboard stops working. I AM able to move the cursor around on the screen. But, I am not able to click on anything and I can't use the keyboard to force quit the finder. The only way to get unstuck is to press the power button on the front of the Mac to shut it down and then restart.
I am using a wired Apple Keyboard and a wireless Apple Magic Mouse. My Mac is a MacPro 2 x 2.3 GHz Quad-Core Intel Xeon Mac.
Like I said. this has never happened before. But it's happened twice since installing Mavericks.Everytime I restart my computer, especially for updating maverick, my keyboard and attached mouse (both apple for an Imac) stop working. When I plug in an other keyboard, I can get into my Imac again. Would this SMC apply to this problem as well?
What should I do?
thanks, hb -
U530 Touch Keyboard stops working after a period of time
I just got a new Ideapad U530 touchscreen laptop yesterday. After a few minutes the keyboard stops working. I uninstalled a few of the Lenovo multimedia programs I don't need. Is there a bios update or a driver I should update after purchase?
Moderator Note; subject edited
Solved!
Go to Solution.The reset didn't work partially. I reinstalled the Comodo firewall and the keyboard stopped working again. I uninstalled it and installed the free Zonealarm.
-
Expanded keyboard stopped working correctly after updating my system from OSX 10.8.6 to OSX 10.9.1 and now 10.9.2. The keypad numbers do not work although the numbers along the top of the keyboard work fine. Moving the keyboard back to computer still using 10.8.6 and it works fine.
See if zapping the PRAM works. Check out KB Article: http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
Maybe you are looking for
-
How to print a specific cell in numbers
how to print a specific cell in numbers?
-
I followed steps on arch frontpage (I guess), but now my system can't boot. So i booted to newest arch cd and wanted to chroot to this installation and I can't. # arch-chroot /mnt chroot: failed to run command /bin/sh: No such file or directory Yea,
-
I'm trying to get to "www.enoriver.org." A window appears asking me to choose an application--I choose Firefox. Then another window opens titled "Another Application" and asks for a file name at the botto0m of page. I choose Firefox from the list of
-
Material available date in cross-company business
Hello guys, I encountered a question in <b>cross-company business</b>. 1. create PO with ME21N; 2. create outbound delivery against PO with VL10B. I found material available date in outbound delivery is always the same as delivery date in PO. why?
-
Trackpad Fix for All Macbook Pro and Macbook Models.
Apple has issued a update for the Trackpad but the update is only compatible with the newer unibody Macbooks and Macbook Pros. I have made the following patch that is compatible with all Macbook Pro and Macbook models with trackpad issues. Don't forg