Laptop Lenovo ThinkPad T510 NTFDARI Core i7 620M opinion
Hello guys,
I want to buy this laptop with following configuration:
Procesor: i7
Model: 620M
Frequency: 2660 Mhz
Memory: 4096 MB
Memory Frequency: 1066 Mhz
Memory type: DDR3
Storage: 500 GB Hard disk (7200 RPM)
The laptop will be used to running complex queries in SQL Server (as client) and different applications in same time and for this is required a performant laptop. My question: is enough performant the above model for what we need? I know there are cheaper alternative from other brands but we have to use Lenovo. Is worth 2200-2300$ this model or can we find an i5 processor alternative (also cheaper) with same performance?
Thank you for your effort.
Corsa wrote:
Hello guys,
I want to buy this laptop with following configuration:
Procesor: i7
Model: 620M
Frequency: 2660 Mhz
Memory: 4096 MB
Memory Frequency: 1066 Mhz
Memory type: DDR3
Storage: 500 GB Hard disk (7200 RPM)
The laptop will be used to running complex queries in SQL Server (as client) and different applications in same time and for this is required a performant laptop. My question: is enough performant the above model for what we need? I know there are cheaper alternative from other brands but we have to use Lenovo. Is worth 2200-2300$ this model or can we find an i5 processor alternative (also cheaper) with same performance?
Thank you for your effort.
You can buy a new T520 with similar specs for that price.
Similar Messages
-
[SOLVED] Thinkpad T510 - Intel Core i7 - Integrated Graphics
Hi,
i recent bought a ThinkPad T510 4349-2RG with an Intel Core i7 M 620 built-in. There is also an NVIDIA NVS 3100.
According to the Intel-Homepage, my CPU should have an integrated GPU (http://www.intel.com/products/processor … ations.htm).
The NVIDIA card just works fine with the latest binary driver. But I would also like to use the integrated Intel GMA (Battery life) and/or bumblebee.
The problem is that the Intel GMA dont get recognized by the kernel, but its also not visible in BIOS (normally there should be an option to select between "Intel integrated" "discrete" and "Optimus" - i've updated to the latest BIOS version 1.44). I double-checked this with a live CD of Ubuntu Linux 11.04 (also only NVIDIA).
Is there any option to get this running?
Output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
[ 0.000000] BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf76c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf76c000 - 00000000bf778000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf778000 - 00000000bf77b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf77b000 - 00000000bf78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 43492RG/43492RG, BIOS 6MET84WW (1.44 ) 03/29/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f68b0] f68b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bf766000-bf76c000
[ 0.000000] RAMDISK: 378a4000 - 37c4a000
[ 0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf7ef2e1 00094 (v01 LENOVO TP-6M 00001440 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ef400 000F4 (v04 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7ef7d1 0F34F (v01 LENOVO TP-6M 00001440 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf6e7000 00040
[ 0.000000] ACPI: SSDT 00000000bf7ef5b4 0021D (v01 LENOVO TP-6M 00001440 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bf7feb20 00052 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feb72 00084 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7fec2e 0003C (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bf7fec6a 00038 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bf7fedbe 000A4 (v16 LENOVO TP-6M 00001440 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee62 00176 (v01 LENOVO TP-6M 00001440 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fefd8 00028 (v01 LENOVO TP-6M 00001440 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6e591a 0084B (v01 LENOVO TP-6M 00001440 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 00000000bf77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf778000 0049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf27c
[ 0.000000] 0: 0x000bf282 -> 0x000bf35f
[ 0.000000] 0: 0x000bf40f -> 0x000bf46f
[ 0.000000] 0: 0x000bf70f -> 0x000bf717
[ 0.000000] 0: 0x000bf71f -> 0x000bf76c
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1012637
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 764999 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[ 0.000000] PM: Registered nosave memory: 00000000bf35f000 - 00000000bf371000
[ 0.000000] PM: Registered nosave memory: 00000000bf371000 - 00000000bf3f2000
[ 0.000000] PM: Registered nosave memory: 00000000bf3f2000 - 00000000bf40f000
[ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf668000
[ 0.000000] PM: Registered nosave memory: 00000000bf668000 - 00000000bf6e8000
[ 0.000000] PM: Registered nosave memory: 00000000bf6e8000 - 00000000bf70f000
[ 0.000000] PM: Registered nosave memory: 00000000bf717000 - 00000000bf71f000
[ 0.000000] PM: Registered nosave memory: 00000000bf76c000 - 00000000bf778000
[ 0.000000] PM: Registered nosave memory: 00000000bf778000 - 00000000bf77b000
[ 0.000000] PM: Registered nosave memory: 00000000bf77b000 - 00000000bf78b000
[ 0.000000] PM: Registered nosave memory: 00000000bf78b000 - 00000000bf78c000
[ 0.000000] PM: Registered nosave memory: 00000000bf78c000 - 00000000bf79f000
[ 0.000000] PM: Registered nosave memory: 00000000bf79f000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf000000 s82176 r8192 d24320 u524288
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995159
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3913576k/5111808k available (3803k kernel code, 1061260k absent, 136972k reserved, 3404k data, 556k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2659.762 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.17 BogoMIPS (lpj=8865873)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000087] Security Framework initialized
[ 0.000092] AppArmor: AppArmor disabled by boot time parameter
[ 0.000341] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001352] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001814] Mount-cache hash table entries: 256
[ 0.002092] Initializing cgroup subsys ns
[ 0.002094] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.002096] Initializing cgroup subsys cpuacct
[ 0.002119] Initializing cgroup subsys memory
[ 0.002132] Initializing cgroup subsys devices
[ 0.002133] Initializing cgroup subsys freezer
[ 0.002135] Initializing cgroup subsys net_cls
[ 0.002136] Initializing cgroup subsys blkio
[ 0.002173] CPU: Physical Processor ID: 0
[ 0.002173] CPU: Processor Core ID: 0
[ 0.002178] mce: CPU supports 9 MCE banks
[ 0.002186] CPU0: Thermal monitoring enabled (TM1)
[ 0.002193] using mwait in idle threads.
[ 0.002908] ACPI: Core revision 20110112
[ 0.046003] Setting APIC routing to flat
[ 0.046400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079318] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05
[ 0.184270] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.184275] ... version: 3
[ 0.184276] ... bit width: 48
[ 0.184277] ... generic registers: 4
[ 0.184278] ... value mask: 0000ffffffffffff
[ 0.184279] ... max period: 000000007fffffff
[ 0.184279] ... fixed-purpose events: 3
[ 0.184280] ... event mask: 000000070000000f
[ 0.194351] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.207564] Booting Node 0, Processors #1
[ 0.320658] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.330605] #2
[ 0.443696] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.453626] #3 Ok.
[ 0.566717] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.569973] Brought up 4 CPUs
[ 0.569977] Total of 4 processors activated (21287.06 BogoMIPS).
[ 0.572103] devtmpfs: initialized
[ 0.573048] NET: Registered protocol family 16
[ 0.573151] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.573153] ACPI: bus type pci registered
[ 0.573289] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.573306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.626058] PCI: Using configuration type 1 for base access
[ 0.626414] bio: create slab <bio-0> at 0
[ 0.627742] ACPI: EC: EC description table is found, configuring boot EC
[ 0.631332] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.722020] ACPI: SSDT 00000000bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.722304] ACPI: Dynamic OEM Table Load:
[ 0.722306] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.722404] ACPI: SSDT 00000000bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.722696] ACPI: Dynamic OEM Table Load:
[ 0.722698] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.743120] ACPI: SSDT 00000000bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.743438] ACPI: Dynamic OEM Table Load:
[ 0.743440] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.752996] ACPI: SSDT 00000000bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.753290] ACPI: Dynamic OEM Table Load:
[ 0.753291] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.764288] ACPI: Interpreter enabled
[ 0.764290] ACPI: (supports S0 S3 S4 S5)
[ 0.764305] ACPI: Using IOAPIC for interrupt routing
[ 0.769164] ACPI: Power Resource [PUBS] (on)
[ 0.772489] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.790239] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.790241] HEST: Table not found.
[ 0.790243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.790253] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.790291] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.790309] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.790324] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.790337] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.790349] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.790362] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.790387] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.790612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.790654] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.790656] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.790657] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.790659] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.790660] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.790662] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.790669] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.790682] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.790695] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.790715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.790717] pci 0000:00:01.0: PME# disabled
[ 0.790762] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.790789] pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit]
[ 0.790862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.790866] pci 0000:00:16.0: PME# disabled
[ 0.790894] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[ 0.790918] pci 0000:00:16.3: reg 10: [io 0x1800-0x1807]
[ 0.790929] pci 0000:00:16.3: reg 14: [mem 0xf2424000-0xf2424fff]
[ 0.791035] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.791058] pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff]
[ 0.791069] pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff]
[ 0.791079] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.791147] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.791151] pci 0000:00:19.0: PME# disabled
[ 0.791180] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.791203] pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff]
[ 0.791289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.791293] pci 0000:00:1a.0: PME# disabled
[ 0.791321] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.791341] pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit]
[ 0.791415] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.791419] pci 0000:00:1b.0: PME# disabled
[ 0.791445] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.791518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.791523] pci 0000:00:1c.0: PME# disabled
[ 0.791549] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.791622] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.791626] pci 0000:00:1c.1: PME# disabled
[ 0.791652] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.791728] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.791732] pci 0000:00:1c.3: PME# disabled
[ 0.791760] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.791836] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.791840] pci 0000:00:1c.4: PME# disabled
[ 0.791876] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.791900] pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff]
[ 0.791986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.791990] pci 0000:00:1d.0: PME# disabled
[ 0.792013] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.792086] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.792199] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.792224] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.792235] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.792245] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.792256] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.792266] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.792276] pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff]
[ 0.792321] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.792325] pci 0000:00:1f.2: PME# disabled
[ 0.792347] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.792367] pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit]
[ 0.792396] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
[ 0.792440] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.792466] pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit]
[ 0.792577] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[ 0.792588] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
[ 0.792600] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.792612] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.792621] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.792629] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.792681] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.792693] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
[ 0.792779] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.792781] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.792783] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.792785] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.792841] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.792846] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.792850] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.792857] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.792994] pci 0000:03:00.0: [8086:4239] type 0 class 0x000280
[ 0.793051] pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
[ 0.793229] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.793255] pci 0000:03:00.0: PME# disabled
[ 0.793326] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.793331] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.793335] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.793342] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.793396] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.793400] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.793404] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.793411] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.793533] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805
[ 0.793555] pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
[ 0.793687] pci 0000:0d:00.0: supports D1 D2
[ 0.793688] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.793693] pci 0000:0d:00.0: PME# disabled
[ 0.793743] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880
[ 0.793765] pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
[ 0.793897] pci 0000:0d:00.1: supports D1 D2
[ 0.793899] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.793904] pci 0000:0d:00.1: PME# disabled
[ 0.793949] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
[ 0.793971] pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff]
[ 0.794103] pci 0000:0d:00.3: supports D1 D2
[ 0.794104] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.794109] pci 0000:0d:00.3: PME# disabled
[ 0.794175] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.794179] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.794184] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.794190] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.794260] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.794264] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.794269] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.794276] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.794278] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.794279] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.794281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.794282] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.794284] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.794285] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.794317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.794387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.794408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.794426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.794446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.794466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.794560] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.797337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797382] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797418] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.797464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797549] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.797629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797706] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.797709] vgaarb: loaded
[ 0.797759] PCI: Using ACPI for IRQ routing
[ 0.797761] PCI: pci_cache_line_size set to 64 bytes
[ 0.797850] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.797852] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[ 0.797855] reserve RAM buffer: 00000000bf35f000 - 00000000bfffffff
[ 0.797858] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[ 0.797861] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[ 0.797864] reserve RAM buffer: 00000000bf76c000 - 00000000bfffffff
[ 0.797866] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.797962] NetLabel: Initializing
[ 0.797963] NetLabel: domain hash size = 128
[ 0.797964] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.797975] NetLabel: unlabeled traffic allowed by default
[ 0.797989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.797993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.800008] Switching to clocksource hpet
[ 0.800954] pnp: PnP ACPI init
[ 0.800967] ACPI: bus type pnp registered
[ 0.801465] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.801466] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.801468] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.801469] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.801470] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.801471] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.801473] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.801474] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.801475] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.801476] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.801478] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.801479] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.801480] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.801481] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.801482] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.801484] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.801485] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.801536] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.801538] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.801539] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.801541] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.801543] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.801544] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.801546] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.801548] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.801550] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.801551] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.801553] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.801555] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.801556] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.801559] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.801560] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.801563] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.801572] pnp 00:01: [bus ff]
[ 0.801603] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.801614] pnp 00:02: [bus 00-fe]
[ 0.801617] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.801619] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.801620] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.801621] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.801623] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.801624] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.801625] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.801626] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.801628] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.801629] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.801630] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.801632] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.801633] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.801634] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.801636] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.801637] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.801638] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.801639] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.801669] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.801905] pnp 00:03: [io 0x0010-0x001f]
[ 0.801906] pnp 00:03: [io 0x0090-0x009f]
[ 0.801908] pnp 00:03: [io 0x0024-0x0025]
[ 0.801909] pnp 00:03: [io 0x0028-0x0029]
[ 0.801910] pnp 00:03: [io 0x002c-0x002d]
[ 0.801911] pnp 00:03: [io 0x0030-0x0031]
[ 0.801912] pnp 00:03: [io 0x0034-0x0035]
[ 0.801913] pnp 00:03: [io 0x0038-0x0039]
[ 0.801914] pnp 00:03: [io 0x003c-0x003d]
[ 0.801915] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.801916] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.801917] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.801919] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.801920] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.801921] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.801922] pnp 00:03: [io 0x0050-0x0053]
[ 0.801923] pnp 00:03: [io 0x0072-0x0077]
[ 0.801924] pnp 00:03: [io 0x164e-0x164f]
[ 0.801925] pnp 00:03: [io 0x002e-0x002f]
[ 0.801926] pnp 00:03: [io 0x1000-0x107f]
[ 0.801927] pnp 00:03: [io 0x1180-0x11ff]
[ 0.801928] pnp 00:03: [io 0x0800-0x080f]
[ 0.801930] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.801931] pnp 00:03: [io 0x1600-0x1641]
[ 0.801933] pnp 00:03: [io 0x1644-0x167f]
[ 0.801934] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.801936] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[ 0.801937] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.801938] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.801939] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.801940] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.801942] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.802000] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.802002] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.802003] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.802005] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.802007] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.802008] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.802010] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.802012] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.802014] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.802016] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.802017] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.802019] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.802021] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.802024] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.802027] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.802048] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.802071] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.802077] pnp 00:05: [io 0x0000-0x000f]
[ 0.802079] pnp 00:05: [io 0x0080-0x008f]
[ 0.802080] pnp 00:05: [io 0x00c0-0x00df]
[ 0.802081] pnp 00:05: [dma 4]
[ 0.802102] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.802106] pnp 00:06: [io 0x0061]
[ 0.802128] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.802133] pnp 00:07: [io 0x00f0]
[ 0.802141] pnp 00:07: [irq 13]
[ 0.802162] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.802168] pnp 00:08: [io 0x0070-0x0071]
[ 0.802172] pnp 00:08: [irq 8]
[ 0.802194] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.802199] pnp 00:09: [io 0x0060]
[ 0.802201] pnp 00:09: [io 0x0064]
[ 0.802205] pnp 00:09: [irq 1]
[ 0.802225] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.802234] pnp 00:0a: [irq 12]
[ 0.802257] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.802507] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.802532] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.802723] Switched to NOHz mode on CPU #0
[ 0.802766] Switched to NOHz mode on CPU #1
[ 0.802790] Switched to NOHz mode on CPU #2
[ 0.802827] Switched to NOHz mode on CPU #3
[ 0.803136] pnp: PnP ACPI: found 12 devices
[ 0.803138] ACPI: ACPI bus type pnp unregistered
[ 0.809007] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.809010] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.809011] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.809014] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.809016] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.809019] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.809020] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.809025] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.809029] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.809036] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.809037] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.809042] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.809046] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.809053] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.809056] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.809061] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.809066] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.809073] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.809074] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.809079] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.809083] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.809089] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.809090] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.809096] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.809100] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.809113] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.809115] pci 0000:00:01.0: setting latency timer to 64
[ 0.809122] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.809126] pci 0000:00:1c.0: setting latency timer to 64
[ 0.809133] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.809137] pci 0000:00:1c.1: setting latency timer to 64
[ 0.809144] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.809148] pci 0000:00:1c.3: setting latency timer to 64
[ 0.809154] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.809158] pci 0000:00:1c.4: setting latency timer to 64
[ 0.809166] pci 0000:00:1e.0: setting latency timer to 64
[ 0.809169] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.809171] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.809172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809173] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.809175] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.809176] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.809178] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.809179] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.809180] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.809182] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.809183] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.809185] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.809186] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.809188] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.809189] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.809191] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.809192] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809193] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.809195] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.809196] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.809250] NET: Registered protocol family 2
[ 0.809382] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.810140] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.811876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.812095] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.812096] TCP reno registered
[ 0.812105] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.812123] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.812327] NET: Registered protocol family 1
[ 0.812454] pci 0000:01:00.0: Boot video device
[ 0.812477] PCI: CLS 64 bytes, default 64
[ 0.812522] Unpacking initramfs...
[ 0.857049] Freeing initrd memory: 3736k freed
[ 0.857674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.857678] Placing 64MB software IO TLB between ffff8800bb000000 - ffff8800bf000000
[ 0.857679] software IO TLB at phys 0xbb000000 - 0xbf000000
[ 0.857724] Simple Boot Flag at 0x35 set to 0x1
[ 0.858111] audit: initializing netlink socket (disabled)
[ 0.858121] type=2000 audit(1307283181.596:1): initialized
[ 0.858513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.860249] VFS: Disk quotas dquot_6.5.2
[ 0.860346] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.860468] msgmni has been set to 7651
[ 0.860628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.860658] io scheduler noop registered
[ 0.860660] io scheduler deadline registered
[ 0.860695] io scheduler cfq registered (default)
[ 0.860786] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.860808] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.861983] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011100000, using 4032k, total 4032k
[ 0.861984] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.861986] vesafb: scrolling: redraw
[ 0.861987] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.968425] Console: switching to colour frame buffer device 160x50
[ 1.066719] fb0: VESA VGA frame buffer device
[ 1.066729] intel_idle: MWAIT substates: 0x1120
[ 1.066730] intel_idle: v0.4 model 0x25
[ 1.066731] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.066771] ERST: Table is not found!
[ 1.066819] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.269059] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.289528] 0000:00:16.3: ttyS0 at I/O 0x1800 (irq = 17) is a 16550A
[ 1.342184] Linux agpgart interface v0.103
[ 1.342250] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.346699] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.346724] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.346788] mousedev: PS/2 mouse device common for all mice
[ 1.346843] rtc_cmos 00:08: RTC can wake from S4
[ 1.350225] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.368707] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.368742] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.368818] cpuidle: using governor ladder
[ 1.368930] cpuidle: using governor menu
[ 1.369080] TCP cubic registered
[ 1.369082] NET: Registered protocol family 17
[ 1.369089] Registering the dns_resolver key type
[ 1.369166] PM: Hibernation image not present or could not be loaded.
[ 1.369169] registered taskstats version 1
[ 1.369764] rtc_cmos 00:08: setting system clock to 2011-06-05 14:13:03 UTC (1307283183)
[ 1.369887] Initalizing network drop monitor service
[ 1.371869] Freeing unused kernel memory: 556k freed
[ 1.372006] Write protecting the kernel read-only data: 6144k
[ 1.374036] Freeing unused kernel memory: 276k freed
[ 1.379233] Freeing unused kernel memory: 820k freed
[ 1.414655] <30>udevd[108]: starting version 171
[ 1.795803] SCSI subsystem initialized
[ 1.809210] libata version 3.00 loaded.
[ 1.814738] ahci 0000:00:1f.2: version 3.0
[ 1.814756] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.814819] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.814859] ahci: SSS flag set, parallel bus scan disabled
[ 1.814905] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.814907] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.814912] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.834923] scsi0 : ahci
[ 1.835114] scsi1 : ahci
[ 1.835275] scsi2 : ahci
[ 1.835441] scsi3 : ahci
[ 1.835597] scsi4 : ahci
[ 1.835756] scsi5 : ahci
[ 1.836192] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41
[ 1.836195] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41
[ 1.836196] ata3: DUMMY
[ 1.836197] ata4: DUMMY
[ 1.836199] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41
[ 1.836202] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41
[ 1.857446] Refined TSC clocksource calibration: 2660.001 MHz.
[ 1.857456] Switching to clocksource tsc
[ 2.153375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.154602] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.154609] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.154838] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.154845] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.155842] ata1.00: ATA-8: HITACHI HTS725032A9A364, PC3ZC70F, max UDMA/100
[ 2.155847] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.157009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.157015] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.157216] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.157222] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.158183] ata1.00: configured for UDMA/100
[ 2.158419] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72503 PC3Z PQ: 0 ANSI: 5
[ 2.475905] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.478447] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.478687] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.480225] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT10, max UDMA/66
[ 2.482926] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.483159] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.484661] ata2.00: configured for UDMA/66
[ 2.486427] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT10 PQ: 0 ANSI: 5
[ 2.805075] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.124275] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.138114] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.138157] sd 0:0:0:0: [sda] Write Protect is off
[ 3.138160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.138177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.140674] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.140675] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.140862] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.181948] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.182662] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.561285] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.402659] <30>udevd[721]: starting version 171
[ 5.616621] ACPI: acpi_idle yielding to intel_idle
[ 5.735472] fuse init (API version 7.16)
[ 6.027584] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.027967] ACPI: AC Adapter [AC] (on-line)
[ 6.033128] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 6.035503] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.035505] ACPI: Thermal Zone [THM0] (55 C)
[ 6.041710] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 6.041730] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.041916] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 6.042077] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 6.049877] Non-volatile memory driver v1.3
[ 6.059884] ACPI: Lid Switch [LID]
[ 6.059942] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 6.060605] acpi device:0c: registered as cooling_device4
[ 6.060954] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.060959] ACPI: Battery Slot [BAT0] (battery present)
[ 6.061014] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input3
[ 6.061019] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 6.070674] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.070713] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.080171] ACPI: Sleep Button [SLPB]
[ 6.080265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.080270] ACPI: Power Button [PWRF]
[ 6.094462] wmi: Mapper loaded
[ 6.119199] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.120805] iTCO_vendor_support: vendor-support=0
[ 6.255308] usbcore: registered new interface driver usbfs
[ 6.255333] usbcore: registered new interface driver hub
[ 6.255381] usbcore: registered new device driver usb
[ 6.255833] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.255940] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[ 6.256006] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.264694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.264718] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.264723] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.264733] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 6.264753] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.264757] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.264776] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.277774] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 6.277776] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.279704] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.283605] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 6.283623] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
[ 6.296289] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.296427] hub 1-0:1.0: USB hub found
[ 6.296432] hub 1-0:1.0: 3 ports detected
[ 6.296507] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.296510] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.296518] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.296544] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.296547] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.296554] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.304884] sdhci: Secure Digital Host Controller Interface driver
[ 6.304886] sdhci: Copyright(c) Pierre Ossman
[ 6.306021] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 6.306036] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.306060] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6.306067] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 6.306109] Registered led device: mmc0::
[ 6.306154] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 6.316265] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.320131] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 6.320137] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
[ 6.332863] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.332976] hub 2-0:1.0: USB hub found
[ 6.332980] hub 2-0:1.0: 3 ports detected
[ 6.333103] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.333112] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.333275] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 6.359105] cfg80211: Calling CRDA to update world regulatory domain
[ 6.408944] WARNING! power/level is deprecated; use power/control instead
[ 6.422229] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.422238] firewire_ohci 0000:0d:00.3: setting latency timer to 64
[ 6.426433] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 6.426435] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.426436] thinkpad_acpi: ThinkPad BIOS 6MET84WW (1.44 ), EC 6MHT44WW-1.19
[ 6.426437] thinkpad_acpi: Lenovo ThinkPad T510, model 43492RG
[ 6.427467] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 6.427632] thinkpad_acpi: radio switch found; radios are enabled
[ 6.429394] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.429879] Registered led device: tpacpi::thinklight
[ 6.429909] Registered led device: tpacpi::power
[ 6.429964] Registered led device: tpacpi::standby
[ 6.430024] Registered led device: tpacpi::thinkvantage
[ 6.432085] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 6.432190] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 6.433196] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 6.482754] firewire_ohci 0000:0d:00.3: irq 43 for MSI/MSI-X
[ 6.482808] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 6.512966] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:ff:35:0a:f1:53
[ 6.512970] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.513038] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 6.513160] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.523606] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 6.605540] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 6.690249] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.711176] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 6.717350] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.717428] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.717460] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.720938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.720939] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.720992] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.721001] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.721041] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 6.729127] hub 1-1:1.0: USB hub found
[ 6.729174] hub 1-1:1.0: 6 ports detected
[ 6.737518] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 6.737520] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 6.737538] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 6.737612] iwlagn 0000:03:00.0: irq 45 for MSI/MSI-X
[ 6.821935] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 6.823671] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.823675] hda_intel: Disable MSI for Nvidia chipset
[ 6.823724] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.838298] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 6.857486] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[ 6.879747] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.960609] nvidia: module license 'NVIDIA' taints kernel.
[ 6.960613] Disabling lock debugging due to kernel taint
[ 6.965263] hub 2-1:1.0: USB hub found
[ 6.965341] hub 2-1:1.0: 8 ports detected
[ 6.981344] firewire_core: created device fw0: GUID 5cff35ff0af153ff, S400
[ 7.031306] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
[ 7.187532] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[ 7.353763] usb 1-1.6: new high speed USB device using ehci_hcd and address 5
[ 7.513384] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[ 7.645548] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
[ 7.645677] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 7.645694] usbcore: registered new interface driver usbhid
[ 7.645695] usbhid: USB HID core driver
[ 7.709967] Linux video capture interface: v2.00
[ 7.719955] Bluetooth: Core ver 2.15
[ 7.720090] NET: Registered protocol family 31
[ 7.720092] Bluetooth: HCI device and connection manager initialized
[ 7.720094] Bluetooth: HCI socket layer initialized
[ 7.725241] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 7.726401] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[ 7.726462] usbcore: registered new interface driver uvcvideo
[ 7.726464] USB Video Class driver (v1.0.0)
[ 7.758706] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.758969] usbcore: registered new interface driver btusb
[ 7.779741] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.779747] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.779755] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.779763] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.779767] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.779885] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.19 Mon May 16 23:32:08 PDT 2011
[ 8.276265] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 8.463589] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.602283] Adding 5276876k swap on /dev/sda2. Priority:-1 extents:1 across:5276876k
[ 11.373150] coretemp coretemp.0: TjMax is 105 C.
[ 11.373202] coretemp coretemp.2: TjMax is 105 C.
[ 11.535629] thinkpad_ec: thinkpad_ec 0.40 loaded.
[ 11.537879] hdaps: initial mode latch is 0x05
[ 11.538022] hdaps: setting ec_rate=250, filter_order=2
[ 11.538240] hdaps: device successfully initialized.
[ 11.538282] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input11
[ 11.538405] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input12
[ 11.538480] hdaps: driver successfully loaded.
[ 12.724831] tp_smapi 0.40 loading...
[ 12.725385] tp_smapi successfully loaded (smapi_port=0xb2).
[ 13.850893] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 13.903961] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.462951] NET: Registered protocol family 10
[ 15.463466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.463569] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.483544] wlan0: authenticate with 00:04:0e:ed:fd:00 (try 1)
[ 22.485591] wlan0: authenticated
[ 22.529427] wlan0: associate with 00:04:0e:ed:fd:00 (try 1)
[ 22.534940] wlan0: RX AssocResp from 00:04:0e:ed:fd:00 (capab=0x11 status=0 aid=2)
[ 22.534944] wlan0: associated
[ 22.537651] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.636802] padlock_aes: VIA PadLock not detected.
[ 23.420441] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 28.197892] EXT4-fs (sda5): re-mounted. Opts: barrier=1,data=ordered,commit=15
[ 28.203962] EXT4-fs (sda6): re-mounted. Opts: commit=15
[ 33.568008] wlan0: no IPv6 routers present
[ 816.256803] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2026.078172] usb 1-1.4: USB disconnect, address 4
Output of lspci -v
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Lenovo Device 2193
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-cdefffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Lenovo Device 215f
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f2427800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06) (prog-if 02 [16550])
Subsystem: Lenovo Device 2162
Flags: 66MHz, fast devsel, IRQ 17
I/O ports at 1800 [size=8]
Memory at f2424000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
Subsystem: Lenovo Device 2153
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at f2400000 (32-bit, non-prefetchable) [size=128K]
Memory at f2425000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 2163
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f2428000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Lenovo Device 215e
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f2420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
MemoSort of solved...
NOTE!
While almost all new ThinkPads have integrated Intel HD Graphics, on those ThinkPads with a Descrete NVIDIA GPU, the Intel GPU is disabled and cannot be enabled. There is no support for Switchable Graphics.
NOTE!
Contrary to the statement above, you can select the GPU in the BIOS of recent models with Nvidia Optimus, e.g. the T510 4384GEG. Windows seems to be able to switch between the GPUs, too.
http://www.thinkwiki.org/wiki/Intel_HD_Graphics
I guess there is no way getting this to work, unless Lenovo unlocks this feature via BIOS-update.
Greetings -
I recently (about 2 months ago) purchased a Lenovo Thinkpad T510 laptop. Ever since I got it, I have the brightness on 50%, and only use it to surf the internet. My battery life is 2:50 at the maximum.
I have a warrenty for the laptop, could I call in and get another battery for free?
It is quite inconvienent to have to charge and recharge at least twice every day. It makes portability almost impossible.
Solved!
Go to Solution.Do you have discrete graphics? If so, it sounds about right for an untweaked system. There are a few tricks to battery life optimization with the NVidia GPU involving PowerMizer.
http://somemorebytes.com/wp/index.php/software/nvpmmanager/
Enable PowerMizer, and use Max power save on battery.
Also put your CPU into the lowest speed in Power Manager's advanced mode (battery only; AC should be adaptive).
Also, defrag.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Lenovo Thinkpad T510 body cleaning
Hey so I just got a T510 and I have realized that the back of my laptop is full of my finger prints due to opening and closing the screen. Now my question is, what cleaning tools do I use to wipe it off and make it look brand new again? This is probably the only thing I hate about this laptop, that every time you touch it, it leaves a mark
Please help me !
Thanks
Solved!
Go to Solution.Hi and welcome to the forum!
I use a microfiber cloth and small chunk of water to clean my gears, but if something is really dirty and can't be cleaned through water then I apply tiny amount of soap to the wet cloth.
There are many products available in the market too, but I don't trust any, YMMV.
Lenovo Blogs has some tips too:- http://lenovoblogs.com/designmatters/?p=121
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)
Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik
-
Lenovo Thinkpad T510 click keys defective
Click keys are acting up, sometimes with both right click keys not working, and othertimes with the left click key operating like the right click key, with the right click key not working at all, and therefore no traditional left click key operation available. This issue affects both the red lined click keys and the touchpad click keys. .. Thoughts? Thanks.
Sometimes when one set (i.e. the touchpad) of keys freaks out, the other set also appears to act up.
Try Mouse > UltraNav tab and try disabling the touchpad, then the Trackpoint. If disabling one of those sets fixes it, then that set if probably faulty.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Thinkpad T510 Windows 7 No wireless adapter found & device manager network adapters exclamations
Lenovo owners,
I was wondering if you could help.
I’m having issues with my laptop(Lenovo thinkpad T510) all of a sudden and cannot pinpoint a solution and it seems my laptop is getting progressively slower.
One day upon startup I could not obtain a network connection either wirelessly or even while connected. (I’ve never had a problem & even earlier that day , and even turned it on later that evening and had no problem, and now these issues are back.) I searched for connections and received a ‘no wireless adapter found’. I checked my device manager and noticed the yellow exclamation point next to all under network connections. When clicking on the driver the message ‘This device is not working properly because Windows cannot load the drivers required for this device.’
I tried updating the driver under driver tab, but to no avail, or I have the most current.
I’ve searched Lenovo forums stating to uninstall drivers and install but many people still have the same issue.
Does this sound like manufacturer issue or virus type relation?
Now my laptop seems to running slower and slower upon startup and shutdown.
Anyway anybody can help would be appreciated. I’m starting to get backlogged on work.
& Yes, the switch on the side of my laptop is turned onFree AVG and Malwarebytes yep. Ive performed scans on both and no threats detected.Diagnostics results shown below. States exactly what Device Manager did and once i try to reinstall driver I get the Device status code 31 window(shown on the right). I've tried reinstalling drivers and restarting but no change in status. The only thing that happened since i that happened when i shut down my working laptop and when i turned it on and ran into these issues were Windows Updates upon shutdown. Any chance a wacky update could wreck havoc on all my drivers?
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules -
ThinkPad T510 Ethernet Card Driver on Debian Lenny
Hello,
I just bought my first Lenovo laptop, a Lenovo ThinkPad T510, and received it just yesterday. I partitioned the HDD and installed Debian Lenny on it. During the installation, Debian was unable to detect a network connection and throws up saying that it can't find a network connection and that if I knew the driver for it, I can select it from a long list. I was using direct Ethernet connection.
So from the list, I tried about 15 of them (just the ones I thought are possible candidates) and no success. I managed to install Debian without configuring that. I can boot into Debian, but I can't connect to the Internet via Ethernet so I can't get the wifi driver or anything. This is so weird. This is the only computer that Debian has ever complained about Ethernet drivers in my experience.
Any help, advice, suggestion is much appreciated.
Thank you in advance. =)Hello,
Thanks for the response. I don't like Ubuntu or prefer it over Debian. I managed to solve this however (despite my lack of update here). I'll list the steps for Debian Lenny ( base install) for those who still wish to stick to it.
1. Download e1000e driver from Intel's website. Unpack and install. Once set up, Ethernet will be working.
2. Download the package iwlagn, which requires a kernel upgrade. Wifi should work after a restart and boot into the new kernel.
The only problem with the new kernel is the brightness/dim controls are no longer working. The following can be set up via alias for easier controls, but they seem to require root. It's not the best way, but I hadn't messed with it much because Squeeze was going to be released soon at the time.
echo 4 > /proc/acpi/ibm/brightness
echo 5 > /proc/acpi/ibm/brightness
I'm currently not on my laptop but I believe 4 is dim and 5 is bright. Or vice-versa. Easy enough to test it yourself.
But that's about it. Everything else ran fine. Since Squeeze is finally released, I will be trying it real soon. =)
Thanks for your efforts!
Kays -
Hi gang, new member and new owner of the mighty Thinkpads
My questions for the forum are as follows:
I purchased a stripped T510 with no battery , caddy or hard drive.
I purchased a new 6 cell battery and hard drive caddy and now have a problem deciding which ssd to choose.
I have my eye on:
OCZ Agility 3 60gb ( agt3-25sat3-60g )
OCZ Vertex 2 90gb ( oczssd3-2vtx90g )
Or any intel ssd thats at least 60gb
I understand the T510 is limited to its sata 2 controller(3gb/s) and it is fine. Im not going to use my laptop to break any speed records. I will be getting an ultabay and adding a cheap 320gb hard drive 7925DDfor storage or just use my external enclosure and the delicious eSata port ( i get excited about my laptop easily) so I am not worried about the difference in ssd capacity all that much(60 gb vs 90)
What I am interested in is the experience of the forum in regards to what ssd the T510 will play nice with.
Should I stay away from OCZ or Intel? I can update firmware if necessary but would like a good dependable ssd to use.
Windows 7 will be my OS.
Thanks for any advices.
Lenovo Thinkpad T510 | [email protected] | 4GB PC8500 | Win7Welcome to the forum!
I'm currently using several Intel 320 series SSDs along with a Crucial M4 (lenovo version, known as Micron C400) and these would get my highest recommendations.
My experiences with OCZ have been mixed, and I'm being kind here. The customer support in itself left a *lot* to be desired.
My $0.02 only.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
[SOLVED] Bumblebee: Failed to initialize GPU with Lenovo ThinkPad W530
SOLVED: See post #20
After years, I decided to come back to the wonderful distro, Arch and back to the forums. Yay!
However, I installed Arch to my new laptop - Lenovo ThinkPad W530 and it uses NVIDIA Quadro K1000M alongside Intel graphics with Optimus technology. Arch is running fine, but I cannot run applications through optirun and I get:
[exitium@rambutan ~]$ optirun -vv nvidia-settings
[ 485.536478] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 485.536909] [DEBUG]optirun version 3.2.1 starting...
[ 485.536922] [DEBUG]Active configuration:
[ 485.536927] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 485.536931] [DEBUG] X display: :8
[ 485.536934] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 485.536938] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 485.536941] [DEBUG] Accel/display bridge: auto
[ 485.536945] [DEBUG] VGL Compression: proxy
[ 485.536948] [DEBUG] VGLrun extra options:
[ 485.536952] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 485.536972] [DEBUG]Using auto-detected bridge virtualgl
[ 485.537190] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 485.537204] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 485.537209] [DEBUG]Socket closed.
[ 485.537223] [ERROR]Aborting because fallback start is disabled.
[ 485.537229] [DEBUG]Killing all remaining processes.
As seen, it says "Failed to initialize the NVIDIA GPU". I have tried different solutions found from these forums and several other places but none of them have worked - the problem remains same. Does anyone have idea how I could fix this? I read somewhere else that there could be issues with newest nvidia drivers - is this possible?
bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
Option "UseDisplayDevice" "none"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Thank you in advance!
Last edited by Exitium (2013-12-18 11:29:54)Hi!
Exactly the same issue here. Notebook -> Thinkpad W530
Currently running on:
linux 3.11.3-1
nvidia 325.15-8
nvidia-utils 325.15-1
bbswitch 0.7-14
Error:
username@hostname ~ $ optirun -vv nvidia-settings
[ 839.449203] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 839.449495] [INFO]Configured driver: nvidia
[ 839.449729] [DEBUG]optirun version 3.2.1 starting...
[ 839.449774] [DEBUG]Active configuration:
[ 839.449817] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 839.449836] [DEBUG] X display: :8
[ 839.449856] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 839.449875] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 839.449890] [DEBUG] Accel/display bridge: auto
[ 839.449909] [DEBUG] VGL Compression: proxy
[ 839.449936] [DEBUG] VGLrun extra options:
[ 839.449953] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 839.449996] [DEBUG]Using auto-detected bridge virtualgl
[ 839.450294] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 839.450344] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 839.450373] [DEBUG]Socket closed.
[ 839.450398] [ERROR]Aborting because fallback start is disabled.
[ 839.450419] [DEBUG]Killing all remaining processes.
dmesg output:
[ 81.162604] bbswitch: enabling discrete graphics
[ 81.396637] pci 0000:01:00.0: power state changed by ACPI to D0
[ 81.396663] thinkpad_acpi: EC reports that Thermal Table has changed
[ 81.483200] nvidia: module license 'NVIDIA' taints kernel.
[ 81.483205] Disabling lock debugging due to kernel taint
[ 81.488096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 81.488289] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
[ 81.488294] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 325.15 Wed Jul 31 18:50:56 PDT 2013
[ 81.665938] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 81.670434] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670528] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670594] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670659] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670723] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.670960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.671192] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 81.671258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.879826] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.905471] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 85.905479] NVRM: os_pci_init_handle: invalid context!
[ 85.905481] NVRM: os_pci_init_handle: invalid context!
[ 85.905486] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
[ 85.905490] NVRM: os_pci_init_handle: invalid context!
[ 85.905491] NVRM: os_pci_init_handle: invalid context!
[ 85.930135] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930442] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930719] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.930990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931526] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.931794] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932062] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932329] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932595] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.932862] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933129] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933396] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933662] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.933942] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934197] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934452] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934706] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.934960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935215] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935469] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935722] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.935976] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
[ 85.940508] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
[ 85.940517] NVRM: rm_init_adapter(0) failed
xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bu … PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau -
Premiere CC crashes on launch on Lenovo ThinkPad W530/Quadro K2000M
Hey everyone!
I can't get Premiere Pro CC to launch on my new laptop--Lenovo ThinkPad W530 with Quadro K2000M graphics. On launch I get "Adobe Premiere CC has stopped working."
The K2000M is on the approved list, so I was hoping that wouldn't be a problem. But uninstalling the nVidia drivers does actually allow me to open Premiere, so clearly that is the problem. I went to the Lenovo site and I'm using the most up-to-date driver (9.18.13.1270/8.15.10.2725/G5DE43WW).
Things that didn't work that I've seen elsewhere on this forum:
- signing out of and into Creative Cloud
- running Premiere in Windows 7 compatibility mode
- running Premiere as administrator
Any help in getting the program and the nVidia running at the same time would be appreciated...I have a project coming up shortly.
Matt Levie
If it helps, here's the problem signature:
Problem signature:
Problem Event Name: BEX64
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.1.4
Application Timestamp: 52aed7f3
Fault Module Name: StackHash_1dc2
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0000000000000000
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 1dc2
Additional Information 2: 1dc22fb1de37d348f27e54dbb5278e7d
Additional Information 3: eae3
Additional Information 4: eae36a4b5ffb27c9d33117f4125a75c2Unfortunately, the crash data you posted doesn't give us any clues.
It looks like the driver you're on is very fresh: 2014-1/5. Another user recently reported a different problem on a Lenovo w/ the K1000M (http://forums.adobe.com/message/5987620#5987620). Don't know yet what driver he's on, but if he's also on a new one, I'd begin to suspect a bug in the driver.
Some additional data could be illuminating. Premiere installs a utility called GPUsniffer. You'll find it here: C:\Program Files\Adobe\Adobe Premiere Pro CC. However, unless you read quicker than I do--and I mean waaaay faster--launching it from there won't do much good. You'll have to open the command console, navigate to the path above, and type gpusniffer.exe. (Let me know if you need more explicit instructions for getting around in the console.) Then copy the report and paste it here.
edited to add: To help determine if the current Lenovo K2000M driver is at fault--and possibly get yourself back in business--please roll back to an earlier driver. -
The new laptop Lenovo ThinkPad Edge E540 I7-4712M 8GB, Windows 8.1, use it for a 2 week.
Laptop bad start (sometimes you have to press the start several times), not always wakes from slееp.
Today in Device manager there was a yellow triangle on the Intel(R) Management Engine Interface.
Properties:
On tab General - This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE
On tab Events - Device PCI\VEN_8086&DEV_8C3A&SUBSYS_502817AA&REV_04\3&e89b380&0&B0 was configured.
Driver Name: null
What can I do about it?Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Hallo,
bin im Forum neu. Ich bin der Bernhard und habe folgendes Problem:
Mein Laptop Lenovo Thinkpad T60 hat das Problem dass wenn ich ihm vom Strom nehme dann müsste er an der Batterie weiterlaufen. Leider schaltet sich das Gerät immer wieder aus.
Früher habe ich das Problem nicht gehabt. Da wir in einer Autowerkstatt arbeiten muss der Computer zum Fehlerauslesen immer wieder vom Strom genommen werden. Die Batterie ist übrigens auch gut.
Hat jemand eine Idee was das sein könnte? Kann es ein Softwarefehler sein oder ......
Vielleicht kennt ja jemand das Problem.
Danke
LG aus Tirol
BernhardDie Ursache ist recht einfach: Der Akku ist kaputt. Die Angabe im Energiemanager ist leider nicht immer aussagekräftig, da dieser nicht defekte oder abgetrennte Akkuzellen erkennt. Das Abtrennen der Akkuzellen übernimmt eine Elektronik im Akku, um Brand- oder gar Explosionsschäden zu verhindern. Der Akkuzustand wird jedoch über separate Datenleitungen abgefragt und dort wird dem Rechner eine volle Akkuzelle gemeldet.
Also: Neuen Akku kaufen.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection -
Lenovo ThinkPad Yoga 14 - Intel Core i7
When will Lenovo ThinkPad Yoga 14 with Intel Core i7 and 8GB RAM appear in stores? And where can i buy it?
Hi , welcome to Plug-In!
I checked in with the team to find we unfortunately do not have news on the Lenovo Thinkpad just yet. Sign up to our newsletter so you're up to date on the latest! -
Lenovo thinkpad L412 blue screen when i move my laptop
i am using lenovo thinkpad L412 laptop
my screen gets blue screen when i move my laptop. if i dont move it it just works fine.
i tried to update my stytem for latest driver and software but still problem doesnt go away.
i also run the diagnostic test for hardware but it doesnt show any problem.You can't have a blue screen in bios, blue screens are a "feature" of Windows OS.
What is the error code mentioned on the blue screen? This could give information about the nature of the problem.
You could also try to boot from a Linux Live cd distribution, such as Ubuntu for example (no need to install it, just boot from it). If the Live cd works well then most probably this is not a hardware problem but drivers related as somebody already suggested.
Please tell us the machine type of your laptop, the operating system used and any hardware changes you have made (added memory, changed hard disk etc). Give as much details as possible!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Maybe you are looking for
-
USB Thumbdrive causes "Mass Storage Device Not Responding"...
Everytime I connect a thumbdrive to my MBP, I cannot eject it. I always get the "disk in use" message. When I go into Activity Monitor, I see "Mass Storage Device Not Responding" and it's eating up a lot of system resources. After a short period of t
-
Dynamic column heading in csv export not working
Hi, I have a SQL report where the column headings are defined dynamically. for an example let's say I have a report SELECT NAME, TODAY'S_DATE FROM TABLE A. Under report attribute column I have defined column heading as "&P_todays_date.". This item ha
-
Sql_trace does not work for Java app using Oracle JDBC thin driver
Hi, I'm using Oracle 8.1.7. I enabled sql trace at instance level by setting sql_trace and timed_statistics to true in init.ora. I restarted the db instance. I wrote a stand-alone java application which used Oracle JDBC thin driver(classes12.zip) to
-
How to insert more than one row in an Oracle table in one go
Hi All, I am working on a file-XI(BPM)-Oracle scenario. I am sending an xml file to XI via a file adapter. On the receiver end i am using a jdbc adapter to insert the row in the database. There is a transformation step within the BPM which is convert
-
Using 2..02 on my zen micro and windows does not see my player through the usb port. Is it true that I need to upgrade XP to service Pack 2? I'd like to avoid this if possible. Does anybody else use this firmware with SP ?Thanks!