Laptop-mode doesn't want to start when work on AC

Hi all,
I've noticed, than dispite I've set ENABLE_LAPTOP_MODE_ON_AC variable in /etc/laptop-mode/laptop-mode.conf on 1, when I'm switching on my laptop being on AC power, laptop-mode is not actually activated.
So, if I check /proc/sys/vm/laptop-mode, I'll get 0 value. After rc.d restart laptop-mode or after workin on battery, everything is ok, and cat /proc/sys/vm/laptop-mode prints 2.
Does anyone faced with this problem? May be, there is a way to make laptop-mode daemon do restart on system boot?
Thank you!

flan_suse wrote:Do you have acpid installed and acpid in your DAEMONS array? I would also place acpid before laptop-mode in the DAEMONS array.
Sure.
But today I've noticed, that laptop-mode is actually running before I login KDE. Looks like a problem is in KDE power management tools.

Similar Messages

Ipad doesn't want to start (french user)

Hello
My ipad doesn't want to start anymore.
Everything was ok but when i have tried to start it, anything was wrong.
The screen is dark and when i try to start it, there's only a light.
I have tried to stay on "start button", but nothing appears.
I have tried to update through a windows computer but i can't because there is a password on my ipad...
Sorry for themistakes, but i'm french.
Anyone can help me?

i have this message in my computer: "itunes could not connect to the ipad because the ipad is locked with a password. Enter code so that the ipad can be used directly by itunes".
But my ipad's screen still stay black

[Solved]Last update broke my X. Now it doesn't want to start

Hi everyone,
I updated my 64 bit Arch today, and when i rebooted the X server didn't start. When I type in "startx" I am getting error message which says something like "Failed to load module nvidia (module requirement missmatch, 0)", but i can load nvidia module with "modprobe nvidia" then when I type in "startx" again everything is the same. How do I overcome this problem. I think I have been using this version of nvidia driver since 2011-08-17 but today my kernel version changed. Can this be the problem and what should I do in this case? I tried downloading the same driver from the nvidia site, so I can build it on my system with the new kernel but I ended up with the same error. I'm thinking of trying the new 285 BETA driver but probably this won't help either. Please give me some hints on what should I do. If this is not the proper place for my post, please excuse me
Last edited by raxbg (2011-09-01 14:26:00)

Thank you laloch, this did the job, but triggered another problem ->
Buttons problem: http://img690.imageshack.us/img690/5505 … 11436r.png
the buttons outlines don't show up and the background of the dock at the bottom is also broken and so is the windows titlebar. Is this somehow related to the IgnoreABI option or is the driver incompatible with the new kernel? I am using compiz btw... but everything elese seems to be working good(except that xbmc doesn't want to start).
Moderator edit
Please do not include images of this size in your posts: https://wiki.archlinux.org/index.php/Fo … s_and_Code
Last edited by bernarcher (2011-09-01 12:43:54)

MacBook Pro doesn't want to start up anymore.

My MacBook Pro doesn't want to start up anymore.
When I turn it on, it turns on, followed by a white/light grey screen with apple logo. After a while a loading wheel appears beneath the logo and a loading bar beneath it. The loading bar loads to about 1/5 and then disappears, leaving the computer stuck on the the white screen with the apple logo and the loading wheel.
I tried to reset the PRAM, but it didn't help, it only got the startup sound to play when I turn the MacBook on.
What can I do about this? Hopefully I don't need to lose my files.
Thanks in advance,
Emil

lonelyplanet wrote:
Seems like I have to use my Time Machine backup drive to reinstall the OS.
No you don't.
OS X can be reinstalled all by itself leaving the programs and files alone, provided the drive is working correctly.
I'm not quite sure how to recover the files from Macintosh HD that I don't want to be deleted during this process.
The TM drive is almost useless because you can't boot from it to recover your latest files with.
That's why I gave the link for the undelete boot drive, you create and boot from that, access your internal drive and grab files, then you can restore from TM or other things, like the repair list of fixes I gave you.
Could you help me a little on how to backup files manually most easily?
The problem is your machine isn't booting to grab the files.
So you need to create a external boot drive, then you can access the internal boot drive directly and grab files out of your Music, Pictures, Movies, Documents folders (etc) to the external boot drive.
Most commonly used backup methods
Or is there a way to do this without deleting all of the files in my user folders on Macintosh HD?
Yes, you can choose to create a
Create a data recovery, undelete boot drive
and recover your filesnow , or you can chose to try fixing the machine without recovering your files, but your taking your chances as we don't know how seriously wrong it is yet.
If your willing to take a risk then proceed through this list, Step 1 - 8 etc., until the machine boots up.
Step by Step to fix your Mac
If the machine doesn't boot up then you need to create the external boot drive to get the files before proceeding with further steps.
If this is too much for you, then call a local PC/Mac data recovery/repair service and they will handle it for a large fee.

I got gray screen on my imac and doesn't want to start up

I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
I have mavrick OS and my firmware password is enabled. ?
Any help
I tired to hold CMD+S or V when it starts up but doesn't help !!!

zaza2009 wrote:
I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
http://support.apple.com/kb/ts2570

HT201406 Hi there, my iPad doesn't want to start anymore and it's fully charged

Hi there my iPad doesn't want to start anymore and it's fully charged?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Hi i changed my apple ID and password and the old apple ID is still poping up asking for password i type in and doesnt bring to page i want . this started when i treid learning about icloud

hi i changed my apple ID and password and the old apple ID is still poping up asking for password i type in and doesnt bring to page i want . this started when i treid learning about icloud

See the iCloud FAQ: your iCloud account is tied to the Apple ID used to set it up: Creating an iCloud account: Frequently Asked Questions

Bonjour keeps dying and doesn't want to start back up.

Hey guys,
On a bunch of our machines, after being upgraded to 10.6, bonjour appears to die completely. Sometimes I can get it to work again via CLI, sometimes I can't. All of our printers for our Macs are shared out via bonjour on a 10.5 Server. The majority of the machines are running 10.6.7, some are still on 10.6.6, but the problem has been around since at least 10.6.4, as far as I can remember.
Any ideas why this is happening or how to fix it?
Jason

zaza2009 wrote:
I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
http://support.apple.com/kb/ts2570

Reference to SR # 3-10116579281, Server Sun v240 doesn't want to start up

Reference to SR # 3-10116579281, Server Sun v240 doesn't want to start up , it starts up for few seconds then shut down by itself
S/N of the server : FN64720058

Thanks whiteychs very much, you direct me about these packages.
I installed system again and choose only core packages and that connected to my wifi:
iw
iwlwifi-5000-ucode
wireless_tools packages
and after reboot on fresh install wifi starts working corectly
thanks again

My mac mini doesn't want to start up

Hi All
my mac mini(no intel) doesn't want to start up.
I tryed all what I need but nothing!
The power buton doesn't work.I just use it for the net.
Any idea for my problem?
Thanks
Message was edited by: jannhewi

Does the mini show any sign of life at all? Have you checked the outlet to make sure it has power, and tried plugging the mini into a different mains socket?
If the mains power is OK, and the mini is completely dead, then there are really only two possible problems: either the power 'brick' is faulty or the mini has suffered a hardware failure. If you can try your power brick with another mini, or borrow another power brick and try it with your mini, that would identify which.

Why do I have such a hard time when I connect to facebook games it doesn't want to start the game it sending me a message about apps...what does that mean?

why do I have such a hard time when I connect to facebook games... firefox doesn't want to open the game the message is sending that their something with the apps..what does that mean?....what is plugin...what do I do for that?

The usual explanation is that it is a licensing issue. It's not Apple refusing to support an MS product (they support loads of others, like QuickLook for Office docs). MS won't let Apple have it. (The Linux-based solutions are third-party reverse engineered.)
That having been said, I've never had a problem plugging an NTFS drive and reading files from it. Why does it take you an hour?
I've never had a problem with a Mac-formatted USB thumb drive not writing either. It's possible that the hardware/software that Apple uses is more sensitive to cheaper thumb drives, but I'm guessing here.

My Lifedrive doesn't want to start...

Hi everybody,
My Palmone lifedrive refuse to start when pushing the sliding button. I hope my datas are still in. I tried a reboot with the reset hole it worked a while but my computer doesn't recognize it for synchronization since my windows 7 hasn't any driver for it and I lost the install CD. Furthermore I can't find it on the net. As it went off now, it's impossible to start it again. So I need help to first know if my datas are still alive somewhere, to find the way how to eventually change the battery (if it appears to be the issue) and to find the appropriate driver for my device working with windows7.
Thanks in advance for your help.

From this side of your computer screen, we cannot tell you what is wrong with your LifeDrive!
They had a problem with the hard drives being very fragile - it's possible yours has broken also. If that's the case, then your data might be gone.
Syncing to Windows 7 has been covered over, and over, and over again in the Windows HotSync section of the forum. You should be able to easily sync via Wifi. Read the sticky threads about "Win7 and Vista instructions" in that section.
Bottom line, it sounds like your device is broken and needs repairs. We've recommended two websites many times here - usedpdaparts.com or directfix.com. They offer parts and repairs. Usedpdaparts offers an upgrade for Lifedrives that removes the hard drive and inserts a Compact Flash socket in its place, with a 4gig memory card to hold data.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

MacBook Pro doesn't want to boot when cd rom is connected

Hello,
I have an issue with my MacBook Pro (2009) model.
When I'm connecting CD-ROM (internal one) computer doesn't want to boot nither from DC ROM nor from HDD.
As soon as I am dissconecting CD ROM system is booting up without any problem.
Please advise.
Thanks,
Dubbster

Hi Dubbster,
Welcome to the Apple Support Communities!
I understand that your MacBook Pro is not booting when you have the Mac OS X Install DVD inserted. Do you get any boot options when you hold down the Option key during startup? Please reference the following article and let me know if you need further assistance.
Startup Manager: How to select a startup volume
http://support.apple.com/kb/ht1310
I hope this helps,
-Joe

My iPad mini doesn't want to start.

It use to work fine. I have put it on the charge and when I came back, it did not want to start. I have tried the reset (press and hold the home button and the on button for 15 seconds) but nothing happen. What can I do?

It happened the same with my Ipad but it is Ipad2 not Ipad mini. If you have some answers or if you done something please advice me on [email protected]

My Ibook doesn't want to start up.

After watching a DVD on my Ibook last night. My Ibook stopt working because I forgot to plug it in to the socket. A couple of hours later I wanted to start my Ibook up again. And got problem. My Ibook isn´t coming further then the grey start up screen with the apple logo and the little grey wheel that is spinning.
This is really getting scary. Please help

Welcome to Apple Discussions!
Is your data backed up? If it isn't I'd buy Prosoft Data Rescue and an external hard disk that is Firewire to copy your information to prior to troubleshooting.
Once you are sure all your data managed to get on the external hard disk, or that you are backed up, follow these instructions to take care of the gray screen:
http://docs.info.apple.com/article.html?artnum=106464

Laptop-mode doesn't want to start when work on AC

Similar Messages

Maybe you are looking for