Laptop model dv4-1135ee​'s power adaptor is not working

Hi,
From where I can get new power adapter for Pavilion dv4-1135ee model in United Arab Emirates. Power adapter part number is" 463553-002". It also says to replace it with HP spare 463955-001.
BR
VVINAYVISHVA

Just to a Google or Bing search with the part number as the search term to find an online vendor.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Power adaptor doesn't work

    My power adaptor doesn't work at times. I have to jiggle in and hold it in at just the right position, for it to work. Would Apple replace a faulty power adaptor like that? Alternatively, is there anything I can do about it?
    Any help would be much appreciated! Thank you.

    Apple will typically replace a faulty power adapter if you are still within your one year warranty period and there are no clear signs of abuse. Just give them a call... or, if you have an Apple store nearby, bring it in. If you go to a store, you should bring your MacBook in as well just to be sure that the problem isn't related to an issue on the MacBook side vs. just the charger.

  • My laptop keyboard is having problems. I took it if to change my bottom case it worked fine prior and then after just the power key worked. I cleaned everything nothing is bent in the cable. now my power key is not working

    Hi my keyboard is not working I took off the bottom case to change it prior my keyboard was fine and after just the power key worked. I checked everything no portions were bent and it plugged in good. I tried to turn it on this morning and now the power key doors not work??

    Back up all data.
    Triple-click anywhere in the line below to select it:
    pmset -g assertions
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • T440p Fingerprin​t power-on is not working

    Hi , i just recieved my new T440p ,  Fingerprint @ power-on is not working although all config. is done typically in lenovo fingerprint manager pro & fingerprint security settings in the BIOS , i start my laptop it goes through windows normal startup & logon without any request for fingerprint .
    Solved!
    Go to Solution.

    Dear Ahmad
    Welcome in lenovo community
    Have you tried to first to enroll your fingers first , an application called Lenovo Think Vantage should be installed .
    Do you have this application installed ?
    Also you need to check the device manager , it's better to send us a screen shot of it .
    Let us know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT1547 My mac book pro is 3 yrs old and today while watching something on it, it got power off suddenly. And power button is not working, left side round button to battery is not working but when I plugg in to charge it, then this round button shows 4 gre

    I am having MacBook Pro 3 yrs old and today while I was watching some movie on it suddenly it got power off and when I am trying to start it, it's power button is not working even the round button on external left side is not showing battery lights. But when I connect it to chrger then Charger only gives green light and even the external round button only shown 4 green lights (if charger connected). I don't know what to do now

    Sounds like you need a #1SMC Reset
    1. SMC reset
    >>Instructions to reset SMC
    Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
    Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc.  If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
    Will not hurt the machine resetting if it's not broken.
    Other related hardware problems (optional):
    Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
    Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
    Apple: Laptop won't power up   Apple: Computer won't power up  Troubleshooting optical drive
    Magsafe problems   Magsafe problems more

  • My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

    My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help

    What ipad,  which model samsung?  Are you attempting HDMI, VGA, or an RGB connection.  Ipad 2 supports mirroring into an HDMI at an output of 1080.  Ipad 1 is limited to only a few apps capable of the output, such as Youtube.
    page64,65 of the latest ipad manual has more details.
    Samsungs are good and should switch with the input - but sometimes you will have to select from the menu manually.
    If in doubt, contact the customer support at samsung UK.
    Also check - Settings/Video, that you have it enabled for Home Sharing.  Apple Id  which will be your .me.com  email plus your apple ID password.  I am not too sure about  this as I cannot remember the exact order I set things up in - but page 89 of the manual references Home Sharing for sharing ipad/itunes content on a home pc/mac - so I would think it applies to content relayed to a tv or monitor too.

  • Printer Power button in not working,no light indication

    Hi,
    HP Deskjet F2400 Series
    My Printer Power light is not working, and Indicator lights are also not blinking. but Scanner is working fine. Also an error message showing "Cover is open".but the cover is closed properly. There is a problem with printer.
    kindly, provide the solution.
    Thanks,

    Hi RamyaVemuri,
    Welcome to the HP Forums!
    I see that your printer power button is not working, and that their is no light indicators.
    I think this guide should help. 'The Cover is Open' Message Displays on the Computer.
    If that doesn't work, please respond with the type of printer you have as their are multiple Deskjet F2400s. Finding Your HP Product Model Number.
    Hope this helps, thank you for posting.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Satellite A660 - Broadcom internal wireless adaptor is not working

    Hi all,
    My first post to this board - I have a new Toshiba Satellite A660 notebook - have only had it for about 4 weeks and it has turned out to be a disaster for me...
    FIRST - I spend weeks getting everything on and configured the way I want it - then the hard disk starts to die...
    I just got it back from the Toshiba service centre and NOW the wifi has stopped working...
    The internal broadcom wireless adaptor is not working - but according to windows and the built in diagnostics it IS working...
    HOWEVER - when I try to use wireless with the built in adaptor it can't detect any wireless networks...
    I then plug in my backup usb netgear wireless adaptor and I can pick up and connect to both of my home wireless networks...
    I am going overseas in a few weeks and need to know that my notebook is going to work/be reliable and not have any more problems - if anyone can help me with this it would be much appreciated.
    John.

    A further update for you all...
    Okay - went back to the Toshiba service centre - the first dead hard disk was replaced by them - but the REAL problem not spotted - it looks like my laptop came out of the Toshiba factory with a faulty motherboard - this in turn has now fried the second hard drive - and now - with a new motherboard and THIRD hard drive it looks like the hardware side of things MIGHT just be solved - but NOW I still have the problem that because the motherboard has been screwed since day one (I only bought this laptop in November 2010) it has basically stuffed/corrupted all of my backups - so now the service centre is charging me 60 dollars to get a set of disks so I can re-image the system myself when I have the chance - and then spend a month putting back all the applications and configuration and data the way I had it after the first few weeks of buying it (at that stage I thought I was good to go and had the perfect new laptop and setup for work...)
    So - I'm heading off overseas in a couple of weeks - my 3 year extended warranty from Australia will not be of any use to me where I am going - not covered - but am STILL hopeful that I'll get the rest of the problems sorted - still can't run the toshiba hdd protection software for more than a few days without it dying and having to be reinstalled and the toshiba pc health monitor does not work at all - when I go to install it it doesn't recognize the bios or whatever - and on top of that I'm using third party hard disk monitoring software (because the toshiba stuff doesn't work on this toshiba laptop - but the third party stuff does) - well, anyway - the third party software is telling me the hard disk has reallocated sectors count error - and there is a CAUTION showing all the time - which I guess indicates that there is now a hard drive problem with the third hard disk (?)
    Anyway - if ANYONE has had a similar run of bad luck to mine with the A660/O7U - I'd really like to know...
    John.

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Is there anyway to power off an I-phone 4s if the power button is not working?

    Is there anyway to power off the phone if the power button is not working?

    Assistive Touch. Tap Settings App > General > Accessibility > Assistive Touch > ON > at bottom of screen tap button > Device > press and hold Lock Screen icon > when slide to power off appears > slide it. To turn iPhone ON connect to Power Source with USB cable, charger or USB port of computer.
    All iPhone 4S have full Warranty Coverage. Make Genius Reservation and take iPhone to Apple for resolution.

  • I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

  • My ipad has a black screen and the power button is not working. Help!

    This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago  when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?

    Have you tried to give it a reset?
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.

  • How can i restart my phone if the power button is not working?

    My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
    Also, I use the on-screen assistance icon but it does not have a power off option.

    demeece wrote:
    My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
    Also, I use the on-screen assistance icon but it does not have a power off option.
    That's correct.  Because how would you turn it back on again if the screen was off and your power button was on the screen?
    Yo need to fix the button, or try letting the iPhone die out completely, then connect it to power and after it's charged for a while, see what happens when you press the Home button.

  • My iphone power button is not working. What can I do?

    Hello, I bought an iphone 5 last year and it still in warranty . It has some regular scratches for the use but it never felt down.
    The power button is not working now and I sent to an apple retailer here in Brazil (SOMA - Revenda APPLE Solution Expert e Assis. Tecnica Autorizada) to fix it. They refuse to do it saying that the button is not working because of  the scratches what I believe is not true. And the retailler suggest to me to buy a new one.
    And more, I receive the iphone with the factory configuration and I don’t know why.
    I would know what can I do to fix the iphone. And How can I use the warranty here in Brazil.
    I couldn't find an e-mail from apple.com support to report this.
    I will stay in US next december. I can fix my phone in an Apple Store?
    I'm very dissapointed with the technical assistance here in Brazil.
    Thank You

    Meaning that you cannot restart or reset the phone?  If you haven't tried already, try both options.
    Otherwise, you can do a backup & restore, or even a restore as new (only after a successful backup).
    If the issue persists, then look at a replacement. Either it will be a hardware defect (free if within warranty), or physical damage ($49 with AppleCare Plus, $149 without it.)

  • Ac power adapter is not working

    i bought this item apox. 9/10 months ago from Tesco so i dont know if i have any cover?
    HP Photosmart Plus All-in-One Printer - B209a
    ac power adapter is not working and i ready own hp printers and dont want to have to splash out on another.
    please help... 
    This question was solved.
    View Solution.

    Hi,
    You should still be under warranty, but if not you should be able to buy one from HP Parts Surfer.
    I hope this helps
    JonW
    I work for HP

Maybe you are looking for

  • Error message when I try to sync my ipod touch it my itune account.

    I recently drop my ipod and I am getting a new one but i need to download my music to my itune account before I replace it.. I got an error message when I tried to sync my ipod with itunes saying that i needed the latest version to connect to itunes.

  • Change in login/logout behaviour?

    Hi all, I used to start my wm automatically from tty login using the following in .profile: if [[ ! $DISPLAY && -z `pgrep -u $USER xinit` ]]; then xinit & exit fi This would automatically start the wm and then logout, freeing up the tty, but the X se

  • Canvas with tab page

    i have a content canvas(blockA) with 2 tab pages(tab1 and tab2) on it. each tab has its own block (blockB and blockC, but they are not master-detail, they are populated by cursor). on the content canvas, i have a column such as DEPT. when i key up or

  • When I attach a file to email, it prints out instead

    I'm running Reader on MacBook -- my attachments to email are printing out instead of attaching. . .?

  • OAF Personalization Property description resource

    I'm trying to extend a Stacked Layout region on a standard page by using Personalization. However, it seems impossible without knowing what the Properties on the Personalization page are for. I did some research and "Oracle Application Framework Pers