Laptop monitor goes blank

Can Flash cause a laptop monitor and the attached monitor to go blank when playing a game on facebook using firefox latest version? I have this version installed 11.7.700.225

I saw another thread in which people were wondering why you'd want to run a machine with a lid closed. For one thing, the external monitor resolution is much better w the lid down. It appears you have to have the laptop plugged in in order to get the external screen to stay live when you close the lid. This is kind of a pain because one of my desks is upstairs and one is down and sometimes I just want to run upstairs and work for 1-2 hours without bothering with the power cord, etc.

Similar Messages

Pavilion f1703 monitor goes blank 2 seconds after start-up

When the computer is turned on, the monitor only functions for a couple of seconds before it goes blank..power light shows it to be working.
If I turn the monitor off at the front power switch, and turn it back on, the same thing happens..2 seconds of normal then blank.
In the couple of days leading up to this, the screen had a slight "flicker" effect going on.
All ideas greatly accepted!!

I am having the identical problem. I hooked this monitor that a friend gave me and it worked great for several days. There were no flickerings or any indications of a looming problem. Then it started going blank after 2 secs and continues to do that. I did see a warning about the "power saver", or something like that, was in operation. Unfortunately, I can't get it to stay on long enough to go into the menue and see if there is anything I can change there. Any help would be appreciated.

HP Omni 220-1050xt Monitor goes blank at random times and will not light up.

Recently my computer screen starting going blank without any warning. One minute it is fine and I am working away, then the screen turns black and no key sequence will bring it back. I have selected a power scheme that has never, never, never set in the categories. I also sent my screen saver to None. I took it to Staples to run a diagnostic which responded with no errors. Within 15 minutes of running, the screen was blank and the computer was unresponsive.

Hello @jlh41,
I understand that you are experiencing an issue where your HP Omni 220-1050xt Monitor is going blank without warning. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Laptop monitor goes black after connection external vga monitor

Hey,
I have a Qosmio G50-10H, running windows 7 32-bit. After connecting an external monitor the internal laptop screen goes almost black. It's possible to see some elements on screen, but it's to dark grey to work on. It does not respond much to color or brightness adjustment (black to really dark grey). The main trouble is when disconnection the external monitor the internal monitor still is dark grey and still isn't responding much to adjustments. It's so dark on the brigthest adjustments that it is impossible to work on. I have downloaded latest driver for support, but still same problem.
Any suggestions?

Hi buddy,
That means the internal monitor is always dark grey even you start the notebook without external monitor?!
Well, in such cases it could be a LCD inverter malfunction. This part controls the backlight of LCD and if its defective, you can see a picture but its very dark/grey.
By the way: Do you notice the same behavior if you are in BIOS setup? So you can check if its Windows related problem or not.
In worst case you need help from an authorized service provider. They can check what the problem is exactly.

IBM Thinkpad Monitor goes blank after a few miniutes

Hi,
I have aT43p with an ATI Mobility FireGL V3200 running XP Sp2. For the past couple of weeks the screen goes blank (Black) after several minutes. I can use the Fn-F7 to toggle the monitor between LCD and external monitor (which is not attached) and back to LCD (or dual display) and the LCD works again!, but alas only for several more moments and then it goes blank again and I have to re-toggle. I find that if I run on only battery power I get several extra minutes before Blacks-Ville. The same effect can be achieved by putting her to sleep and then waking her.
I should mention that there is a slight pink tinge to the display during the initial splash screen (while the option to enter the Bios via blue Access IBM button), but this goes completely for subsequent screen displays.
I can connect across the LAN using VNC and can see windows (as one would expect).
I have gone to the support area and downloaded all drivers and reinstalled to no avail. I have also checked the Monitor connections, but there is no obvious loose connection. I have also run a in-depth virus analysis (using ESET NOD) and an Adaware sweep, again with no positive result. I have also gone into MSCONFIG, disabled as much as I can and I have also rolled back using System Restore to a time before the issue presented.
Nothing that I have done to date has made the slightest difference.
The screen Blacks even if I go straight to Bios which inclines me to think that the problem lies outside of Windows.
If anybody has any ideas or suggestions I would really appreciate it.
Thanks
Dave
Message Edited by ddempsey on 08-10-2008 05:48 AM

Hello ddempsey,
I can confirm all your problems (except the "slight pink tinge"- sure it is not
a reflection or so?), I've got them on my a21p since a couple of years as well.
I am using an external monitor after I tried all software possibilties and was
fed up with the toggling. colours are still excellent, I contradict a dying
as such, a digital display is either on or off, not fading away.
in desperation I replaced the inverter card (part number 12P3053) as a
last resort but without any success.
so I was happy to find one with exact the same problem and I hope
by jumping on your train that someone comes up with a solution.
have you tried this:
if you do not boot windows, leaving a plain start screen
either by pressing pause or later f8 the display shuts down
in the same way, thereby proving that the problem
is beyond an explanation due to a higher resolution task.
this arouses a suspicion whether the ATi Rage Mobility graphic card
(messing up in all brands of notebooks - see copious complains in the www)
might be the cause. unfortunately ATI been bought by AMD
but the support of its successor for old cards is a disgrace compared
what Lenovo still delivering for ancient IBM users!
regardsDamian
Message Edited by Anvil2k8 on 08-20-2008 05:16 AM

Premiere Pro 5.5 program monitor goes blank, please help!

I started a super simple brand new project in Premiere Pro 5.5, importing only simple, small resolution png files (to create an animation), and my program monitor goes completely blank. This started happening right when I updated the driver for my video card. I run a Windows 7 64-bit machine, with NVidia Quadro 2000, driver updated (333.11), source footage is png files, my OS is up to date, I use just a single monitor, there are no error messages at all, when I try to scrub, my program monitor stops working (it shows a still image), then suddenly it goes completely black! I have no third party effects, plug-ins or hardware installed. And yes, my Mercury Playback Engine GPU Acceleration is good. I am completely stumped since the project is barely started. Does anyone have any ideas?!

started happening right when I updated the driver for my video card. I run a Windows 7 64-bit machine, with NVidia Quadro 2000, driver updated (333.11)
So... have you tried a different driver?
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
You MAY need to use an earlier driver
-Old Drivers http://www.nvidia.com/Download/Find.aspx?lang=en-us

Start up has pink vertical lines then monitor goes blank on iMac

I was working on my computer when all of a sudden the screen went grey with 5 vertical pink lines appeared. I have switched the monitor off, but now it starts up with the pink lines then goes to a blank screen, what is the problem?

Sounds like a hardware problem ..
You can run the Apple Hardware Test
Or take your Mac to an Apple Store or Apple certitied repair provider listed here.

External monitor goes blank

The backlight went out on my Toshiba laptop so I hooked up a new(er) flat screen monitor to it. The Windows XP startup windows _begins_ but never gets _to_ my desktop. Windows XP startup runs for about 20 seconds and then the monitor reads 'no signal.'
I simply want to access information (files, folders or photos) on the Toshiba before I sent it to laptop paradise forever.

Hi
Usually you should be able to switch to external monitor using the key combination FN + F5.
I think this key combination would not work in safe mode since safe mode loads only some essential system processes.
So if you are able to boot the Windows OS in normal mode then check FN + F5
You could also try to change the display settings in graphic display properties -> last tab Settings (to get the display properties click right on desktop and choose Properties )

Program monitor goes blank when editing certain clips

A few days ago a 2 new problems occurred.
1.
The project I have is sett to 720, 24 fps.
The clips I use is from 5D MK3, shot in 720, 50fps.
Some of the clips I made duplicates of, and interpreted to 24fps for a slomo effect.
The 24fps clips works fine on the timeline. But the one that still has 50fps will go black in the program monitor when I try to edit them on the timeline.
It doesnt matter what I do, ripple edit or just shorten, still gets black. If I drag the marker over tha clips it shows fine though, but when editingt hem, just black.
2.
The second problem is regarding the very last clip in the timeline.
The last frame, orjust some visual error after the last frame, now has the right part of the program monitor screwed up. A part of the screen is black.
All this started like 2 days ago, after I upgraded my 2xSingle license to full CC. I had PS and PPro before.
Whats going on?
Some facts:
- Premiere Pro CC 7.1.0 (141) - All updated
- Win 7 64bit (all updated as of 2013-11-30)
- 64 GB ram
- Clips from Canon 5D MK3, 720, 50fps, IPS codec
- No other software running, restarted several times
- Geforce 480GTX, Asus P9X79, Intel Core i7 3820 3.6 GHz, Corsair 32GB (4x8192MB) CL10 1866Mhz
- GeForce Drivers 331.82
- Never had this problem before
- Mercury Playback Engine GPU Enabled (disabled doesnt solve the problem)
Please Advice
// Magnus Svensson
2 screenshots

As I wrote, " I can drag the ends of the in/out points, BUT I cant drag the selected area in the source monitor"
Again, the source monitor was just a comparrison, to show that this wasnt a problem only with the program monitor. I posted the image since you didnt understand what I meant.
There are apparent issues with inserting theese clips on the timeline or editing them. I'm sorry if my bad english messes this up
I guess you'll have to include all the info I have written to get a grip of the situation, so I will try to clarify again for you, if you think it will help
- The project I have is sett to 720, 24 fps.
- The clips I use are from 5D MK3, shot in 720, 50fps.
- Some of the clips I interpreted to 24fps for a slomo effect.
- I have QT installed
- All drivers updated
- The interpreted 24fps clips works fine on the timeline.
- But the one that still has 50fps will go black in the program monitor when I try to edit them on the timeline.
- It doesnt matter what I do, ripple edit or just shortens/makes longer, it still gets black.
- If I just drag the marker over the clips in the timeline it looks fine.
- If I interpret to 1-48fps, it works fine. Only 49-50 fps screws it up
- Some problems occur in the source monitor. I CANT drag the full grey selection with the handle in the middle I made with in/out points, as shown in the picture
- I tried to make a new project, same problems.
- Everything worked fine a cople of days ago
I hope this makes it easier to locate the issue.
Thanks

Monitor goes blank randomly

I have a MacBook Pro (Retina, 13-inch, Late 2013) and for whatever reason my monitor will go blank and everything keeps working such as sound, etc. It comes back and it happens a few times a day. This occurs with two different brands monitors although both are connect via DisplayPort to HDMI and I've also done HDMI to HDMI. I have occasionally connected an external monitor via DisplayPort to HD15 and no blank outs.
The only common part is my MBP and the monitor connecting via HDMI. Different cables, different brand monitors, etc. I am running 10.10 and this has happened with for quiet a while from 10.8 until now.

I am using the Thunderbolt display on a PC with the ASUS P8Z77-V Thunderbolt enabled mother board. I have a dual display setup with and smaller VGA monitor.
The Thunderbolt display blacks out randomly. Sometimes I can use the resolution tool from my secondary display, reset the resolution down and the Thunderbolt comes back on. Other tiomes that doesn't work and I have to re-boot. This happens several times aq day. I thought it might be the motehr board, as this is fairly new technology in the PC/Windows world.
Next time it happens, I'll see if I can use the flashlight trick - maybe get it repaired at Apple.
Thanks

Second monitor goes "blank" when first monitor goes full screen in Mtn Lion.

Hello Apple community. I am using two monitors and when I put a program like iTunes in fullscreen mode (with the arrow symbol in top right) the second monitor displays that grey patchwork and I can't move windows over there.
My question: Is there any setting to change this (so I could have one screen in fullscreen mode and the other screen on the desktop) or is this just the way it is?
Any info would much appreciated!
Thanks
-MP

mizatt wrote:
My question: Is there any setting to change this (so I could have one screen in fullscreen mode and the other screen on the desktop) or is this just the way it is?
It's just the way it is.
BetterTouchTool (free app, in the app store) has a little feature that resizes your windows to full size when you drag them near the top edge and returns them to the previous size when you drag them down again. I find this useful when using two monitors (saves you having to resize them manually).

External monitor going blank!

Hello,
I have a exrernal Dell 24' monitor that has been working 100% ok for years on my macbook now am running 10.7.2.
I use the mac in clam mode and using the Dell as the main monitor.
Today I have a problem as after around 10mins of uses the monitor went to sleep! pluging the monitor in to other devices helped to provide its fine.
I rebooted the macbook and still the monitor would not come on!
I done the Shift + Control and power, Command + Option + R+P and the booted in to safe mode and this restored the display :-)
But it kepts on happing every few hours and even sometime the display will come it by its self!
Are odd!
Please can someone help?

Reset the PRAM
http://support.apple.com/kb/ht1379
Reset the SMC
http://support.apple.com/kb/ht3964
If you have another computer or device that could you attach to the monitor to check if it does it over multiple devices?
Also do you have another external monitor or projector to hook up and see if the same thing happens there?
Rule out if it's the MB or if it's the monitor. If you're still under AppleCare, or even if you're not, and are unable to do the above then I would suggest getting it taken in. Schedule a Genius bar appointment to get it looked at.

Monitor going blank

Need help - Sometimes when I am on the computer for a good amount of time and watching a video or news clips, the screen goes black. the sound and works but I have to hit "any key" to get the screen to come back on. what causes that and how do I fix it? Thanks in advance, Ken

Open the Energy Saver pane of System Preferences and check the display sleep setting.
(51714)

HP2311x Goes blank/black when connected to my hp Pavilion HPE

Last month, my monitor started to go blank periodically and with increasing frequency. The system setup is:
Windows 7 Home Premium (64 bit)
GeForce GT 530 video card
8 Gb RAM
Intel Core i7-2600 CPU @ 3.40 GHz
I have:
Cleaned the video card
Upgraded to the lastest GeForce driver
Updated the monitor driver
Factory reset the monitor
Changed the connector wire from DVI to HDMI
Connected another monitor to the HP Pavilion (works fine)
Connected the HP 2311x monitor to my Chromebook using HDMI (works fine)
Connected the monitor to my son's laptop (works fine)
The only time that the monitor goes blank/black periodically is when it is connected to the HP Pavilion HPE. A new monitor may solve the problem but as the monitor works with other computers I do not think that it is dead yet.
From the actions of the monitor it seems to switch off and then back on again.
Any ideas as to what to do to fix the issue?

Hello @phil1001,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your monitor goes black when connected to your desktop computer, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Monitor or TV is Blank after Starting the Computer. This should help return the video display to your desktop computer through the monitor.
If the issue persists after completing all of the steps indicated in the resource above, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Mac mini (late 2012) HDMI video going blank randomly in Yosemite 10.10.1; sometimes comes back on with snowy screen

Wow, this reminds me of what happened with Mavericks 10.9.0 until 10.9.3 and later were released and fixed this problem.
My monitor is a Dell S2440L connected to my Mac mini late 2012 via an HDMI cable.
The monitor goes blank randomly and sometimes a snowy screen like you would see when watching a UHF
channel on an old CRT TV shows up when the video comes back on. This happens while in the OS.
I also have power management problems again with computer not sleeping properly and my Magic Mouse
being able to wake up the computer despite "Allow Bluetooth devices to wake this computer" being unchecked.
I also have Wake for network access, power nap and start up after power failure unchecked as well.
Computer sleep and display sleep are set to "never" as I always had it with Mavericks.
These problems occurred after shutting down my Mac and restarting it this morning.
I know using a VGA cable will fix it but I don't want to do that.
Sorry for sounding frustrated but I'm not alone. So many people are having the same issue
of HDMI video blanking out while in the OS.
I love the look of Yosemite but wish I was back with Mavericks 10.9.5 where everything worked
flawlessly and I really mean flawlessly. It was magical. Not a single problem.
I guess we have to wait for 10.10.2 or 10.10.3.
I don't want to go back to Mavericks but if my screen keeps blanking out then my computer is of
no use for work or multimedia.
I'm sorry about the rant.
If anyone has figured out a workaround until Apple can issue another point release, please let me know.
I already tried resetting the SMC and NVRAM several times to no avail.
Thanks in advance.
I appreciate any help.
Paul

EtreCheck version: 2.1.2 (105)
Report generated 13 December 2014 at 9:03:00 AM GMT+7
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL S2440L - forced RGB mode (EDID override) 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:53:11
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.62 GB (150.23 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2 : 249.49 GB (172.23 GB free)
USB Information: ℹ️
Apple Inc. iPhone
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/DAEMON Tools Lite.app
[not loaded] com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Support]
/Applications/TemperatureMonitor.app
[not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Support]
/System/Library/Extensions
[not loaded] com.novatelwireless.driver.3G (2.1) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSB (3.0.11) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSBDev (3.0.11) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.1) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[invalid?] com.tencent.xin.WeChatHelper.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uHD-Agent UNKNOWN (missing value)
Google Drive Application (/Applications/Google Drive.app)
MacFortHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      5% WindowServer
      0% BBLaunchAgent
      0% AppleSpell
      0% fontd
      0% Google Drive
Top Processes by Memory: ℹ️
241 MB Safari
172 MB mds_stores
155 MB com.apple.WebKit.WebContent
120 MB spindump
103 MB Google Drive
Virtual Memory Information: ℹ️
11.13 GB Free RAM
3.86 GB Active RAM
998 MB Inactive RAM
1.19 GB Wired RAM
2.15 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 08:10:23 AM Self test - passed
Dec 12, 2014, 03:44:20 AM com.apple.WebKit.WebContent_2014-12-12-0...diag [Details]
Dec 11, 2014, 11:05:33 PM RimAlbumArtDaemon_2014-12-11-230533_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:23 PM RimAlbumArtDaemon_2014-12-11-230523_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:12 PM RimAlbumArtDaemon_2014-12-11-230512_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:02 PM RimAlbumArtDaemon_2014-12-11-230502_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:55 PM RimAlbumArtDaemon_2014-12-11-230455_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:42 PM RimAlbumArtDaemon_2014-12-11-230442_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:30 PM RimAlbumArtDaemon_2014-12-11-230430_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:20 PM RimAlbumArtDaemon_2014-12-11-230420_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:11 PM RimAlbumArtDaemon_2014-12-11-230411_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:06 PM RimAlbumArtDaemon_2014-12-11-230406_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:03:57 PM RimAlbumArtDaemon_2014-12-11-230357_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:37 AM RimAlbumArtDaemon_2014-12-11-101037_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:26 AM RimAlbumArtDaemon_2014-12-11-101026_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:16 AM RimAlbumArtDaemon_2014-12-11-101016_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:08 AM RimAlbumArtDaemon_2014-12-11-101008_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:59 AM RimAlbumArtDaemon_2014-12-11-100959_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:44 AM RimAlbumArtDaemon_2014-12-11-100944_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:34 AM RimAlbumArtDaemon_2014-12-11-100934_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:31 AM RimAlbumArtDaemon_2014-12-11-100931_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:53:22 AM SystemUIServer_2014-12-11-095322_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:03:41 AM discoveryd_2014-12-11-090341_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:02:02 AM discoveryd_2014-12-11-090202_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:00:58 AM RimAlbumArtDaemon_2014-12-11-090058_Pauls-Mac-Mini.crash
Dec 10, 2014, 09:55:37 PM QuickTime Player_2014-12-10-215537_Pauls-Mac-Mini.crash

Laptop monitor goes blank

Similar Messages

Maybe you are looking for