Laptop no longer detects MG2520

The first time I installed my printer like a breeze, after that I've had trouble with it since. Last time installing a new driver worked, but I've tried that this time and it still didn't work. I uninstalled the whole printer thinking I could get it set back up, but my laptop, Dell Windows 8, won't detect the thing and now it won't set up because of it. -.- Please help!

Hi Dazzling1901!
Welcome to the Canon Forums and thanks for your inquiry!
The Forums aren't meant for immediate assistance, but are designed to allow the community to help each other with issues encountered or tips they'd like to share along the way.
If this is a time-sensitive matter, our US-based technical support team is a much more efficient way to get help! They're ready to help 24/7 via Email at http://bit.ly/EmailCanon . You can also reach them by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
We hope this helps!

Similar Messages

My laptop no longer detects my built in webcam

I have an HP G60-635DX notebook. I have a built in webcam which I have used several times before, but now all of a sudden my laptop is not even detecting I have a built in webcam. What to do? I have a Mobile Intel 4 Series Express Webcam. It bums me out. It is the only way I can talk to my boyfriend face to face while he is out of town and now it is not even working!

OK, to start with, may I know if you can you check using webcam with Cyberlink Youcam Software & if webcam is listed in device manager under imaging device....
To get to device manager, follow the below steps:
Click on the Start button and then choose Control Panel.
Click on the System and Security icon.
Note: If you're viewing the Large icons or Small icons view of Control Panel, you won't see this link. Simply click on Device Manager and then proceed to Step 4.
In the System and Security window, click on the Device Manager link located under the System heading.
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Windows XP is no longer detecting the iphone

Out of the blue my desktop is no longer detecting or charging my iphone. It doesn't show up in device manager either.
I have reinstalled all software,drivers and no luck. All services are running.
It works fine on my laptop and charges fine on the wall charger.
I have tried my friends iphone on the desktop and it also does not get detected, so I assume it has to be some software problem.. Any ideas?

Hello,
I have a similar problem now. Only addition is that the phone itself is not working either and when i connect to comp it results in opening of 'Found New Hardware wizard'
Did you find solution to your problem???

My MBP 7,1 wifi connection suddenly stopped working. It was working fine before until the battery emptied. I turned it on but it froze so I tried to reset it. Then, after that it no longer detect any wifi signal in any areas I go.

Hi Everyone. My MBP 7,1 didn't have any wifi issues not until 2 weeks ago. The laptop's battery got empty and when I tried to turned it on, the computer just froze. So I tried to reset it. However, I noticed that the wifi or airport can no longer detect any wifi signal. There were instances that it wouldn't turn on when I shut it off but now, it seems okey. I tried the zapping of PRAM and deleting all the things needed as I saw in different threads but it still not working. The ethernet works fine but I still need the wifi. Its been 2 weeks already. I don't have an Apple Store near me coz I am in southern part of Philippines. Can someone shed light on this? Thank you so much.

Hi!! To add more to the issue, the other day, my airport card is nowhere to be found. It now says no airport card installed which is really crazy. I also noticed that my MBP freezes during start up and I had to zap the PRAM so it would open up. Anyone there who experienced the same thing? I'd really appreciate your suggestions. Thanks!

My 2 notebooks running XP will no longer detect the BEFW11S4 WAP, what can I do?

My 2 notebooks running XP will no longer detect the BEFW11S4 WAP, what can I do?
The connections just stopped yesterday. Both laptops work OK when connected by ethernet cables and my main PC running XP64 connected also by ethernet is not affected.
Both laptops can see my neighbour's wireless network and worked OK with my son-in-laws network last night when I took them over to his house.
Can I assume that the "wireless component has died?
Any recommendations for a direct updated replacement?
I'm currently connected to NTL broadband but may at sometime switch to Sky broadband in the future but I understand that I would not be able to do this with my NTL phone line.

Thanks for the comments Charrie21,
SSID Broadcast is enabled,
Of the 3 leds on the front left:
WLAN ACT is not illuminated
WLAN Link is illuminated [According to the instruction because it is connected to a cable modem],
POWER is illuminated.
Of the 3 leds on the front right:
LINK is illuminated,
ACT is not illuminated,
Diag in not illuminated.
The router has been reset several times.
SSID has been changed several times
Channel number has been changed several times
WAP was previously 64BIt and has been changed to 128Bit
Firmware version is the same date as currently on the Linksys web sute for this model.
I am thinking the "wireless" component is dead.

WRT300N no longer detecting network

Hello,
After a loss of power the WRT300N is no longer detecting the network I have setup. Other wireless networks are shown. I hit the reset button already, and nothing changed. I tried to access http://192.168.1.1/ as suggested elsewhere but I am not getting an internet connection at all when the router is hooked up to my laptop via ethernet (all lights are green on the router except wireless and security). I also attempted to add the router via Vista and it asked for the PIN which I cannot find. I also tried to reload with the Linksys software and it could not detect the router and said to check the connection.
I am using Vista and am relatively computer illiterate. I am a poor grad student who can't pay Linksys $30. I'd appreciate any help or suggestions.
Thank you.

When I got to the third step (Checking the Router’s IP Address), nothing was listed for "Default Gateway" (message below). I cannot get to step 4 (Getting the DNS Servers from a Linksys Router) as I cannot access the site (no internet connection through the router).
Windows IP Configuration
   Host Name . . . . . . . . . . . . :
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
   Physical Address. . . . . . . . . : 00-26-82-49-09-A2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
   Physical Address. . . . . . . . . : 00-26-82-49-09-A2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetLink (TM) Fast Ethernet
   Physical Address. . . . . . . . . : 70-5A-B6-4E-F2-66
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{2FF814D9-BEB6-4F03-AF23-210E0C99C6BA}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{628DD40F-A7FC-4790-A8F8-B3B1F818E8EB}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Network card no longer detected after hdd failure

So yeah, my laptop's hdd crashed, I cloned it to another.
It no longer detects my pcmcia card, model GCS2220.
I tried chrooting the install from livecd and reinstalling kernel, still nothing.
Odd thing is, before I chroot the card works fine, after chrooting ifconfig fails to work with eth0.

Did you bind (mount -bind olddir newdir) /dev and mount /sys and /proc (I mean that's the place wherefrom ifconfig gets its information ) from the livecd's environment into ur chrooted environment ??
Last edited by Onwards (2008-09-24 00:43:11)

Windows no longer detecting my Audigy 4?(Non-P

Hey all. I've had my Audigy 4 (non-Pro) installed and working super for about 50 days, but it started giving me a weird problem. Windows was no longer detecting the card! It was weird. DX Diag, programs like EVEREST... they all report no sound card whatsoever.
Here are my PC specs:
XP Home Edition
Albatron K8X800 Pro
S754 3200+ ClawHammer
x 2 OCZ ELPE 52 MB(2-3-2-5)
Visiontek XTASY X850XT PE
x 80 GB SATA 2 Seagate, x 80 GB Maxtor
Some other things to note:
XP has been repaired. Went from Service Pack , updates, and all the way to Service Pack 2. The card requires XP w/SP2, yes, so I have that covered.
Onboard audio is disabled through the bios. I have AC'97 integrated audio on this.
My motherboard has fi've PCI slots - although I can only access 4 because my video card is in the way, and I have tried three of those and I get the same problem.
I have tried it in other PCs in my house, double-checked each time - so it is not ESD as I originally believed. It works just fine on those PCs. It is being not located only on MY PC.
So guys and gals, I do not know what to do... I am stumped. It's the weekend so I can't call Creative support until Monday. I don't want to request an RMA through my warranty because clearly it's just a problem with my PC. What should I do?!Message Edited by Celsius on -26-2005 07:36 PM

Device not recognized in iTunes

Iphone is no longer detected on itunes/computer it is synched with.

One of my Iphones is no longer detected by the itunes/computer that it is synched with. The computer/itunes does detect other devices. The iphone in question is able to be detected on another computer/itunes.
I updated software oof iphone on another computer. I updated itunes on the computer that does not detect the phone. I rebooted both. I tried software conflict.
Does anyone have an idea how to resolve? I have all of my contacts, apps, photos, music etc on that computer.
When I updated phone software on another computer to see if that was the problem it wiped out all music,apps, photos etc on the phone. I have thee devices with one apple id and they are synched to different computers.

You should try another USB cable, charging and sending data through the cable is not completely the same, sending data is using other contacts inside the plug or docking connector.

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone.

After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone. On my iPhone I now suddenly get the question: Do you trust this computer (after connecting to the usb port)

Try this!
I had the same problem as you an it worked for me.
http://support.apple.com/kb/HT1923

My ipod touch 3rd gen wont turn on or charge and laptop couldnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? help please

my ipod touch 3rd gen wont turn on or charge,laptop doesnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? it happened after i plugged it in a socket then shows not supported with this accessory....help please.........thanks

Try:
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Help! My Vision M is no longer detected by my

After my Zen froze up on me today I was forced to reset. After that my PC no longer detects that is is hooked up. The Zen says that it is docked,but nothing. I have removed and reinstalled my software. I've made sure that it is fully charged, no difference. Any clues anyone? It has worked perfectly since I got it earlier in JAn.

WRONG SECTION! ZEN VISION M's GO IN POTRTABLE MEDIA THINGY! but heres the answer to your problem.. i think atleast. Try going to my computer and see if you can see it. If not, windows media player, and/or creative media source. then if all goes to worrse. Control panel>System>Hardware>Device manager... and see if you can see it

After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
Yet another Leo let-down.....

Air port can no longer detect Time machine or Airport express

I have a Time capsule (last generation) and an Airport Express. TIme capsule was set up a few months ago and working fine. Today I tried to Add the Airport express to the network to use it in another room. Everything semed to work OK and I got the message that the system is added successfully and waiting for AExpress to start. It took for ever so I opened the AIrport utility window again and try to re do i. I am not sure what I did wrong I can no longer detect either of my device with Airport utility to set up a secure network. MY Internet connection is fine and I can connect using the AIrport to other networks that Airport detects in the area fine also. I just don´t see the net work I configured or the devices. I sure would like to know how it got messed up and how to get out of this. I have tried unplugging and restating the time capsule etc as they suggest in Apple manuel. But I have not tried resetting the time capsule. Would this erase the back ups it already has? Please help.

I have a Time capsule (last generation) and an Airport Express. TIme capsule was set up a few months ago and working fine. Today I tried to Add the Airport express to the network to use it in another room. Everything semed to work OK and I got the message that the system is added successfully and waiting for AExpress to start. It took for ever so I opened the AIrport utility window again and try to re do i. I am not sure what I did wrong I can no longer detect either of my device with Airport utility to set up a secure network. MY Internet connection is fine and I can connect using the AIrport to other networks that Airport detects in the area fine also. I just don´t see the net work I configured or the devices. I sure would like to know how it got messed up and how to get out of this. I have tried unplugging and restating the time capsule etc as they suggest in Apple manuel. But I have not tried resetting the time capsule. Would this erase the back ups it already has? Please help.

Laptop no longer detects MG2520

Similar Messages

Maybe you are looking for