Laptop not booting after recent Security patch - fixed

I couldn't get me Mac to boot unless in Safe Mode.. After trying all kinds of things like zapping PRAM and deleting Caches, what finally did the trick was one of two things...
I turned off the ADOBE Version CUE from start up items. (I was also running CS3 so that might have been part of the problem)
I also reset the PMU see http://docs.info.apple.com/article.html?artnum=14449
Also here is a good link to save about these kind's of problems
http://www.macfixit.com/article.php?story=20060322080433175
Hope it helps someone.

Similar Messages

Not Booting after recent Security Patch/Java update

My wife has experienced what many have experienced with the recent update.
MacBook not booting after update (i.e. - "I have no name!")
I have tried everything posted on this topic since 2/13/09, but without any success. Does anyone have the fix for this yet?
Things I have tried:
* I can boot in safe mode (holding "Shift" while restarting)
* I cannot boot from an install disk(s) (holding C while restarting) - I have both a black one from purchase, and two gray ones with purchase from MiniMac
* Booting with verbose - gets stuck at same place as everyone else
Operating in safe mode:
* I can run DU and "repair" drive
* I can see and access the CD/DVD
* I cannot see drive in target drive mode (doesn't ever connect the 2 systems)
* I downloaded the update files from apple and reinstalled them individually (via USB ext Drive) with a reboot in between
* I attempted to update & archive, but I cannot run install CD from any systems disks (see above)
Has anyone figured out how to fix this yet?

Same problem than the other guy who is not mentioning the update in the title.
Powerbook 1.67.
System log said "No user defined computer name" and "using blah blah name" or so.
Mac Os X report (for apple) says:
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000003900FF1C PC=0x00000000008FC020
Latest crash info for cpu 0:
Exception state (sv=0x4299D280)
PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
0x000233F8 0x000ABEAC 0xFF9BA29B
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8d8000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
Proceeding back via exception chain:
Exception state (sv=0x4299D280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x43D0D000)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x4299D280)
PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
0x000233F8 0x000ABEAC 0xFF9BA29B
Kernel loadable modules in backtrace (with dependencies):
com.apple.ATIRadeon9700(4.1.8)@0x8d8000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
Exception state (sv=0x43D0D000)
PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

Laptop not booting after recently installing windows 10

I have been tryign to boot my pc all morning it just keeps at the loading screen after the HP Logo, I recently upgraded to windows 10 its been fine beside a few quirks that been fine to work with but it just wont boot up now. Yesterday it was acting werid as the taskbar wouldn't let me do anything but just left click open the programs I have on the taskbar other then that the taskbar didn't work and now today it just won't boot up! Help please!

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 15 TouchSmart 15-r137 Notebook and Notebook does not turn on after a Windows 10 upgrade. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows.
Please let me know how this goes.
Thanks.

Dot net Applilcations are not running after Microsoft Security patches in Sep and Nov 2014

My team did the microsoft security patches of Aug2014 and November2014 on 10 client machines (10 macines 2005) without a hitch. The Client machine (Windows 2005) accepted the patch, but all machines one of the applicaiton(VB6.0 and VB.net2005) is not able to
connect to the server.The event log was filled with SChannel errors indicating code 80 (internal_error), implying something that was deeply wrong with SChannel:
The following fatal alert was generated: 80. The internal error state is 1250.
and
The following fatal alert was generated: 80. The internal error state is 1051.
Has anyone else experienced this issue with this or another update, or have some tips as to how I might better diagnose the issue? Thank you.

Hi,
I have seen a few threads with the same error, please try to uninstall KB2992611 to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Laptop not booting after I Upgraded BIOS

Toshiba Satellite A215-S5849
Originally had issues with the left speaker making a horrible buzzing noise. Searching forums & help boards & the fact that I'm fairly computer Literate I came to the conclusion a OS reinstall was called for.
Since I only use this laptop for DJing theres only a couple of programs on it so it was not too much hastle.
Reinstalled OS Windows 7 updated it & all the drivers & the Buzz was still there.
This is when I read from a couple of users of Toshiba laptops said an upgrade of the BIOS helped them.
So I went to the official Toshiba support page & flashed my laptop using the following BIOS upgrade
ACPI Flash BIOS version 2.00 for Satellite A215 (PSAFGU/PSAFHU) 32/64-bit
Nearing the end of the flash my pc screen went black power lights are on, cord light on, battery light on just no OS
What I've tried.
Unplugged from power supply.
Removed Battery
Left for 20 mins & then tried to reboot.
Same thing happens each time
Power lights come on HD spins for a minute but nothing happens after that.
Any ideas why an official software update would cause my computer to not work & how do I roll back or clear my bios to default specs.

Finally I found a good Phoenix crisis copy at : http://mods.myftp.org/Tools/CrisDisk_and_Pen_Drive?_Recovery.rar
to download my own version of crisis disk with the new v2.0 rom bios. ready to build the floppy by running the crisdisk.bat:
http://rapidshare.com/files/410963513/CrisDisk.zip?.html
I posted this instruction to repair my A215 with these files:
Since finding a solution was a very confusing experience, here is how I fixed it (it should work for most similar models.)
Now read it all the way through because the steps are critical.
I got a Toshiba Satellite A215 PSAFGU (S6814) And after shutting down from overheating during a flash from windows it didn't boot. Black screen and nothing more. Meanning my bios was corrupt
So after lots of trial and error, using an external usb floppy drive I managed to save my laptop.
Maybe people here describe how to do it, but they tell you to download the wrong crisis recovery files and once you try to use your ROM instead of the one on the disk, or try to replace phlash16.exe it just fails. Tried injecting but that didn't work.
Finally I found a good Phoenix crisis copy at : http://mods.myftp.org/Tools/CrisDisk_and_Pen_Drive?_Recovery.rar
unrar and go to the directory, then unrar (you'll see it) CRISDISK.rar .
This copy of crisis with phflash16.exe (in the extracted directory) is a good version that can handle the newest versions of bios ROM.
Now copy your ROM file to the crisisdisk directory renaming the file to bios.wph and thus replacing the existing one.(i used the new 2.0 version ROM from the Toshiba site - in this case its called m10a200.rom)
To prevent 'dos path' errors when building the disk, copy the entire directory to a simple one like c:\cirsis
Build your disk now by running CRISDISK.BAT - the process includes quick formatting, copying the three files, and lastly making it bootable, make sure you go through all the steps. ( at first, i messed the last part by not having it bootable and it failed ofcourse)
once it says it created the disk successfully, put it in your external usb drive (or use the disk you created to make a bootable flash drive by using hp drivekey boot utility available here: http://h20000.www2.hp.com/bizsupport/TechSupport/S?oftwareDescription.jsp?swItem=MTX-UNITY-I23839 I didn't have a chance to test it with usb flash drives, but it should work.)
Now once you connected your media to the usb port on your laptop:
make sure the battery is out, power cord out, hold fn+f, while doing that, plug the cord and then push the power button, release the fn+f key once you see the light on your usb drive/usb floppy is starting to blink. it should pause for a few seconds, and then start reading the disk for a while (not just 3 seconds). Process should not take more then 10 minutes so waiting more then that is a waste(trust me). The computer should reboot byitself if everything is fine. Mine took about 5 minutes but give it 10 just to make sure.
After hours of finding, replacing, injecting, only this worked.
This works for sure, if you follow these instructions with your Toshiba Satellite A215. Don't loose hope - you will recover it.
A good sign is when using the fn+f method and it flashed the usb drive/floppy. It means its 99% recoverable.
Really hope this saves time for others.
This is a solution posted by yarivc on the USA Toshiba site.
http://laptopforums.toshiba.com/t5/System-Recovery-and-Recovery/Toshiba-Satellite-A215-S7422-bios-crisis-recovery/td-p/69185
BTW
to the last poster
If you were to ask 100 customers in any comp store who just purchased a Toshiba Laptop if they knew a OFFICIAL UPDATE from the manufacturers support website would VOID a warrenty I gaurantee not one of them would know that nor be impressed by it.
Further more what screwed up my bios was not the BIOS upgrade but the fact that Toshiba has a install from your desktop (windows) button in the update, researching this I found that one should never use this method because Windows in inherently unstable when it comes to BIOS update.
This option should NOT have been included in the update since its very unstable to do so.
On a side note.
My left speaker buzzing noise is back. But it doesnt seem too annoying right now concidering I saved myself money & headache.

Ntlmaps not running after recent update. (FIXED)

FIXED - Ended up re-writing MAKEPKG, depends, modified patches file and new MD5 sums to build on Python 2.7. Instructions below for anyone who needs them. Cheers - Arkay.
Hi All,
I use ntlmaps in conjunction with corkscrew to create ssh tunnels out through my work proxy to my home network. It's always worked perfectly fine until a recent pacman -Syu.
From looking into it as much as I can it appears that Python 3 has been pulled into the mix where ntlmaps appears only to work with python 2.
In the original effort to fix it I updated to the latest MAKEPKG in the AUR which also doesn't seem to work with either version of Python.
I've attempted to debug the issues in Python though my knowledge of the language is sorely lacking.
The initial error I get is:
File "/usr/bin/ntlmaps", line 31
print 'NTLM authorization Proxy Server v%s' % conf['GENERAL']['VERSION']
^
SyntaxError: invalid syntax
But the code block above appears ok to me. On further investigation (running it line by line in interactive mode), it appeared to be the includes causing the issue at which point I found dos line endings on all the code in the site-python ntlmaps code. After removing all of them and converting back to unix eol's (didn't seem to really make a difference), I still get the same syntax errors. Further looking finds includes to libraries which possibly no longer exist or are depreciated in python 3. "threads" seems to be the main offender, according to the doco it is depreciated but should still work (tm).
I'm pretty much at a loss as to what to do next. I've tried swapping to cntlm but for some reason our proxy won't allow the connections through the way ntlmaps does.
I also just tried to re-install it with aurget. The makepkg worked but the install script failed with:
Byte compiling python modules...
error: command failed to execute correctly
Looking into that now too...
Any help would be much appreciated. Perhaps someone else can attempt to install and run it on their system.
Cheers,
Arkay.
P.S. My system is i686, recently updated.
P.P.S. Apologies to the mods. This should most likely be in the PKGBUILD forms... Please move and remove this P.P.S
Last edited by arkay (2010-10-26 01:00:09)

Ok. For some reason I haven't (yet) been able to get the PKGBUILD working with python 3.
I have however updated everything to work as expected with python 2.7 (specifically ntlmaps-0.9.9.0.1 under python2 2.7-2).
Here's the relevant bits for anyone who would like to build against 2.7 instead (if you have problems with 3).
Filename: PKGBUILD
# Contributor: Graziano <[email protected]>
# Maintainer: John Gerritse <[email protected]>
pkgname=ntlmaps
pkgver=0.9.9.0.1
pkgrel=5
pkgdesc="'NTLM Authorization Proxy Server' (APS) is a proxy software that allows you to authenticate via an MS Proxy Server using the proprietary NTLM protocol."
url="http://ntlmaps.sourceforge.net/"
license="GPL"
arch=('i686' 'x86_64')
depends=('python2')
backup=('etc/conf.d/ntlmaps')
install=$pkgname.install
source=(http://downloads.sourceforge.net/sourceforge/$pkgname/${pkgname}-${pkgver}.tar.gz patches ntlmaps.install ntlmaps.rc)
md5sums=('7ee0a00d5446f39ebbe5f0f90465986e'
'0ba42ac958b124b8e635c1524b26138e'
'a78770387e22c14a37bfdaee25c6594a'
'602132fda99e27efdd636a946e034d6b')
build() {
PYTHONVER=`python2 -c 'import sys;print(sys.version[0:3])'`
cd $srcdir/$pkgname-$pkgver/
patch -Np1 -i ../patches
install -D -m 600 server.cfg $pkgdir/etc/conf.d/$pkgname
PYDEST_SITE=$pkgdir/usr/lib/python$PYTHONVER/site-packages
mkdir -p $PYDEST_SITE/$pkgname
cp -a lib/* $PYDEST_SITE/$pkgname
install -m 644 __init__.py $PYDEST_SITE/$pkgname/__init__.py
install -D -m 755 main.py $pkgdir/usr/bin/$pkgname
install -D -m 755 ../ntlmaps.rc $pkgdir/etc/rc.d/ntlmaps
echo $pkgname > $PYDEST_SITE/$pkgname.pth
echo "echo $pkgname > $PYDEST_SITE/$pkgname.pth"
Filename: ntlmaps.install
# This is a default template for a post-install scriptlet. You can
# remove any functions you don't need (and this header).
# arg 1: the new package version
pre_install() {
/bin/true
# arg 1: the new package version
post_install() {
echo "Byte compiling python modules..."
python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
# arg 1: the new package version
# arg 2: the old package version
pre_upgrade() {
/bin/true
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
echo "Byte compiling python modules..."
python2 /usr/lib/python2.7/compileall.py >/dev/null 2>&1
python2 -O /usr/lib/python2.7/compileall.py >/dev/null 2>&1
# arg 1: the old package version
pre_remove() {
/bin/true
# arg 1: the old package version
post_remove() {
/bin/true
op=$1
shift
$op $*
Filename: ntlmaps.rc
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
case "$1" in
start)
PID=`pidof -o %PPID /usr/bin/ntlmaps`
stat_busy "Starting ntlmaps"
if [ -z "$PID" ]; then
/usr/bin/ntlmaps > /var/log/ntlmaps.log 2>&1 &
fi
if [ ! -z "$PID" -o $? -gt 0 ]; then
stat_fail
else
add_daemon ntlmaps
stat_done
fi
stop)
PID=`pidof -o %PPID /usr/bin/python2 /usr/bin/ntlmaps`
stat_busy "Stopping ntlmaps"
[ ! -z "$PID" ] && kill $PID &> /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon ntlmaps
stat_done
fi
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
Filename: patches
diff -Naur ntlmaps-0.9.9.0.1/__init__.py ntlmaps-0.9.9.0.1_new//__init__.py
--- ntlmaps-0.9.9.0.1/__init__.py 2005-06-10 13:49:35.000000000 +1000
+++ ntlmaps-0.9.9.0.1_new//__init__.py 2010-10-25 12:49:03.820614080 +1100
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/python2
# This file is Copyright 2004 Darryl A. Dixon <[email protected]>
# and is part of 'NTLM Authorization Proxy Server',
@@ -20,10 +20,10 @@
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-import os, sys
+#import os, sys
-ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
-ntlmaps_libdir = ntlmaps_dir + '/lib'
-sys.path.append(ntlmaps_libdir)
+#ntlmaps_dir = os.path.dirname(os.path.abspath(__file__))
+#ntlmaps_libdir = ntlmaps_dir + '/lib'
+#sys.path.append(ntlmaps_libdir)
-del os, sys
+#del os, sys
diff -Naur ntlmaps-0.9.9.0.1/lib/config.py ntlmaps-0.9.9.0.1_new//lib/config.py
--- ntlmaps-0.9.9.0.1/lib/config.py 2005-06-10 13:46:43.000000000 +1000
+++ ntlmaps-0.9.9.0.1_new//lib/config.py 2010-10-25 12:51:35.847799575 +1100
@@ -52,7 +52,7 @@
the config file. Otherwise the function falls back to
'server.cfg' in the current directory. """
- configFileName = configFileDir+'server.cfg'
+ configFileName = configFileDir+'ntlmaps'
optionsList, notUsedArguments = getopt.getopt(argv[1:], 'c:')
diff -Naur ntlmaps-0.9.9.0.1/main.py ntlmaps-0.9.9.0.1_new//main.py
--- ntlmaps-0.9.9.0.1/main.py 2006-01-27 12:35:00.000000000 +1100
+++ ntlmaps-0.9.9.0.1_new//main.py 2010-10-25 12:58:02.445983916 +1100
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python2
# This file is part of 'NTLM Authorization Proxy Server'
# Copyright 2001 Dmitry A. Rozmanov <[email protected]>
@@ -18,17 +18,16 @@
# Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-import __init__
import sys
-import server, config, config_affairs
+from ntlmaps import server, config, config_affairs
# config affairs
# look for default config name in lib/config.py
-conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, __init__.ntlmaps_dir+'/'))
+conf = config.read_config(config.findConfigFileNameInArgv(sys.argv, '/etc/conf.d/'))
conf['GENERAL']['VERSION'] = '0.9.9.0.1'
Save each of the code blocks (cut/paste into an editor) with the filenames given into a directory. Update/check the md5sums in the PKGBUILD for each (dunno how to upload files into a thread so you'll have to check the sums match after pasting/saving and I don't yet have AUR access). Then run makepkg. You should end up with a working ntlmaps for python2.7.
Cheers,
Arkay.
Last edited by arkay (2010-10-26 03:40:20)

Ssh not working after recent security updates

ssh worked fine just 2 weeks ago.
in these last 2 weeks i did several updates, i am not sure which caused the problem.
Symptoms:
when i ssh to another machine and i get a "Segmentation Fault" error; when i scp the error message is "lost connection"
This issue was talked about as re-occurring regularly as
discussed on http://discussions.apple.com/message.jspa?messageID=4532389#4532389
But the remedies or fixes suggested there did not change those errors.
On some other site, it was suggested to use 'ssh -1 '
which actually worked but i could not open X11 xterm window,
which usually worked with 'ssh -X' or recently 'ssh -Y' worked instead.
Question:
Hopefully, the security fixes should give back the basic
UNIX X11 functionality. The question is when ?
(I am curious how many people are experiencing the same problems, as this seems quite a serious problem...)
Victor
MacBook Pro Mac OS X (10.4.9) 2.33 GHz Intel Core 2 Duo

I Just tired my mom's WHITE iphone four bought at the same time as mine (mines black) it is fully updated to IOS7 and it worked! I dont know what it is, but it must be a defect with the black one. I wish apple had an aswer for this one... Mine still doesnt work.

OSX Mavericks won't connect to Wifi automatically after recent (security) patch.

After the recent OSX Mavericks software update I am having wifi connectivity issues. My MBP (retina) won't connect to my preferred wifi automatically and I have to do it manually. Am I the only one having issues after the update and are there any fixes?

I am also having the same behavior, after updating to 10.9.3 WIFI won't reconnect.
I have to turn-off wifi, then turn-on wifi to get connected.

My Laptop B490 not booting after bios update

My laptop not booting after updating bios i used windows 8 OS.
I downloaded Bios from following link.
Bios Download Link
After updating bios, system restarted automaticaly, after that only power led is glowing, screen stays blank.
Help me solve it.
Solved!
Go to Solution.

hi sathish291
Welcome to the Forums.
Can you try the following:
1. Power down the machine, remove the AC adapter and battery.
2. Hold the power button for 30secs and reconnect the AC adapter only then turn the computer ON.
If the machine still doesn't power up normally and boot into WIndows then it's likely that something went wrong (could be a bad BIOS flash or an internal component might have gone defective during or after the BIOS update). In this case, you may need to contact lenovo on how to go about getting the unit serviced.
Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After updating with the recent security patch I now have constant spinning colour wheel almost every key stroke is responded to by the wheel. Can this be fixed?

Since installing the recent security patch I am getting the spinning colour wheel on almost every keystroke in Finder and in Gmail. Any way to speed up - or is this the result of the new security measures?

It would help to give us more information. Etresoft: EtreCheck is a free app developed by one of the contributors to this forum which will generate a system report on your computer. If you can paste the report here we can take a look and see what might be the problem.

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

MacBook Pro will not boot after software update

MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you). MONEY, MONEY, MONEY is the name of the game. They can cause your computer to crash and still charge you!
Does anyone have an answer to why my computer is showing a little gear spinning for hours? I have tried several things with NO luck.
Thanks-

Run through the list of fixes here
Step by Step to fix your Mac

Forms are not opening after applying QSP patches in R12

Hi All,
please help on below issue.
forms are not opening after applying QSP patches in R12.
all services are up and runnin.
E-biz:12.0.6
DB:11.2.0.2
Thanks in Advance.
Regards
Kumar

Hi Hussein,
Thanks for quick respond..
OS version:Red Hat Enterprise Linux Server release 5.5 (Tikanga)
The below list of patches we applied on 10.1.2 home:
===================================
[email protected][P2PDB31] => opatch lsinventory
Oracle Interim Patch Installer version 1.0.0.0.64
Copyright (c) 2011 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : /s02/app/p2pdb31/apps/tech_st/10.1.2
Oracle Home Inventory : /s01/app/p2pdb31/apps/tech_st/10.1.2/inventory
Central Inventory : /u01/app/p2pdb31/inst/apps/P2PDB31_p2pap16d/admin/oraInventory
from : /etc/oraInst.loc
OUI location : /s01/app/p2pdb31/apps/tech_st/10.1.2/oui
OUI shared library : /s01/app/p2pdb31/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so
Java location : /s01/app/p2pdb31/apps/tech_st/10.1.2/jre/1.4.2/bin/java
Log file location : /s02/app/p2pdb31/apps/tech_st/10.1.2/.patch_storage/<patch ID>/*.log
Creating log file "/s01/app/p2pdb31/apps/tech_st/10.1.2/.patch_storage/LsInventory__03-12-2012_18-23-44.log"
Result:
Installed Patch List:
=====================
1) Patch 9974899 applied on Mon Mar 12 04:29:56 EST 2012
Unique Patch ID: 14106915
[ Bug fixes: 7552946 4692585 6790178 7529830 6526074 9974899 8416899 6018059 6024000 6772953 7514592 7529859 5596834 6844221 9892569 5724681 7430171 6471931 5979883 5155185 6060499 5740055 6134487 6912781 6681624 5985742 4473073 7021360 4685283 4635520 6433471 5902630 9288120 7519011 6237650 7195030 5763122 5999450 6917549 6150541 5562810 6647933 9204863 5453754 6153975 5697416 5932346 5573438 7146872 7574599 6682888 7229577 9195865 6655345 6713795 5025985 9213612 7113141 ]
2) Patch 9273888 applied on Mon Mar 12 04:29:10 EST 2012
Unique Patch ID: 14106915
[ Bug fixes: 9273888 ]
3) Patch 8447875 applied on Mon Mar 12 04:28:41 EST 2012
Unique Patch ID: 14106915
[ Bug fixes: 6490362 8447875 8351021 ]
4) Patch 12828135 applied on Mon Mar 12 04:27:40 EST 2012
Unique Patch ID: 14106915
[ Bug fixes: 5220448 6350565 6079585 5458753 9655023 4175906 5901912 6864078 4486132 5896963 11725035 6647005 5095815 4519477 5347751 4691191 4754900 5861360 8290534 5382595 5071931 6370967 5458543 6607951 5179574 4329444 5029950 5464895 5029952 5029954 5738539 5648727 5352587 5631915 4402808 4871035 6455161 5114396 5091108 5584790 4605877 4751932 5751672 5490845 10080564 6753516 8534394 3345756 5933477 7592360 5094098 10183338 5015557 4679094 5675556 5154689 12828135 5222931 5910829 5754150 5227879 4152843 4661844 6079603 5637094 7044603 6016022 4905112 8290629 4581220 4166537 7120513 5276400 7154097 7154098 5408664 5563256 6395024 4146291 6397568 6854919 12419228 9108675 5901877 4768040 5049074 7022400 5960451 5490935 5049077 4542188 4680009 4593539 4555795 12565867 5406923 4359124 5689908 5258410 4969005 3962946 3743912 5648102 9352208 5057964 8836540 3935623 5014128 4873311 4439469 4331689 6705965 4597251 4903532 6055387 9764906 7576788 5650178 5225797 4047969 4554284 5376215 4874628 5401921 5151518 4458415 4700543 7375686 5226235 4900129 5122955 5095648 4561867 5239126 5869471 4712638 5354517 4925103 4745776 5998987 4939157 6404864 4627335 7300525 5501362 4587572 4969029 9119261 6270140 5055442 7334756 6639839 4492467 5222032 5151675 5242647 6999528 6737308 7137797 6864202 4587431 5605370 6647068 9952279 6826532 4335559 5417371 4671216 5065930 9362645 4575854 6130365 5355257 7173149 5243019 6639553 4966417 5884075 4899479 4610820 3837600 5092688 4528572 4449900 4601861 6009358 4226736 6404447 4348230 8785236 5233111 5644862 4197970 ]
5) Patch 12434128 applied on Sun Mar 11 23:48:16 EST 2012
Unique Patch ID: 14106915
[ Bug fixes: 9357234 7379127 9173023 8265594 7135493 12434128 7135488 8298232 9772332 9765884 7156655 7608327 7156648 8537027 9679852 7379122 ]
6) Patch 9593176 applied on Sun Mar 11 19:07:38 EST 2012
Unique Patch ID: 12856826
[ Bug fixes: 5116235 5969391 7573720 6395358 7392832 7526041 8287889 8428638 9200985 6446152 8342525 8319129 8278813 6128859 4407272 7021759 5563375 7369690 7001328 7497460 9499728 9254095 7215354 7164050 7171994 6770810 9084276 7304653 7595761 1947595 8859958 5950737 6722224 7442879 8242418 9463433 6391947 7240862 6652955 7358376 6857221 7329300 8928753 8947375 8974551 9390538 7114153 6025516 7833659 9320023 6460568 7286928 5465339 8272078 7651246 6821297 7350891 6823259 6704955 9293220 5375851 8552429 7261996 8755926 8316127 8359788 7567072 6894576 8348570 8847739 7512736 7231982 7529909 7242694 6998181 6933210 7621923 9148117 5733397 6683962 7142365 6999812 6747939 6251633 3213707 8623626 7170999 7029083 6132689 7657973 7552880 7359193 8928735 8940272 6078303 8866722 6790720 9436383 7000696 5155021 8221857 7319888 4526825 8808264 9902558 8339004 8485711 9148124 7126045 6724714 7175618 6502349 6510297 9124173 7123031 ]
7) Patch 11669923 applied on Sun Dec 11 02:00:51 EST 2011
Unique Patch ID: 13373014
[ Bug fixes: 11669923 10174371 8602992 ]
8) Patch 6400501 applied on Sat Nov 12 20:13:35 EST 2011
[ Bug fixes: 6400501 ]
9) Patch 5394728 applied on Mon Aug 24 14:47:45 EDT 2009
[ Bug fixes: 5394728 ]
10) Patch 3559326 applied on Mon Aug 24 14:46:51 EDT 2009
[ Bug fixes: 3559326 ]
11) Patch 8300196 applied on Mon Aug 24 14:40:34 EDT 2009
[ Bug fixes: 8300196 ]
12) Patch 7140405 applied on Mon Aug 24 14:40:04 EDT 2009
[ Bug fixes: 6764875 6116405 ]
13) Patch 6371228 applied on Mon Aug 24 14:38:32 EDT 2009
[ Bug fixes: 6371228 ]
14) Patch 5917053 applied on Mon Aug 24 14:37:45 EDT 2009
[ Bug fixes: 5917053 ]
15) Patch 7016961 applied on Mon Aug 24 14:35:24 EDT 2009
[ Bug fixes: 7016961 ]
16) Patch 6995251 applied on Mon Aug 24 14:27:40 EDT 2009
[ Bug fixes: 6995251 ]
17) Patch 7121788 applied on Mon Aug 24 13:20:56 EDT 2009
[ Bug fixes: 7121788 ]
OPatch succeeded.
============================================================
we got the error, servlet error in application.log
12/03/05 18:13:15.482 formsweb: 10.1.3.5.0 Started
12/03/05 18:13:39.497 formsweb: ListenerServlet init()
12/03/05 20:26:53.850 formsweb: Broken pipe
12/03/05 20:26:53.851 formsweb: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:100)
at sun.nio.ch.IOUtil.write(IOUtil.java:71)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.writeFullyImpl(Channels.java:59)
at java.nio.channels.Channels.writeFully(Channels.java:81)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:155)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:662)
12/03/12 09:37:34.639 formsweb: 10.1.3.5.0 Started
12/03/12 09:54:40.191 formsweb: Servlet error
java.lang.NoClassDefFoundError: oracle/forms/servlet/MLEncoder
at oracle.forms.servlet.FormsServlet.parseLine(Unknown Source)
at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.5.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.forms.servlet.MLEncoder
Dependent class: oracle.forms.servlet.FormsServlet
Loader: forms.web.formsweb:0.0.0
Code-Source: /s02/app/p2pdb31/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib/frmsrv.jar
Configuration: WEB-INF/lib/ directory in /s02/app/p2pdb31/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib
This load was initiated at forms.web.formsweb:0.0.0 using the loadClass() method.
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2204)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1726)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1682)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1667)
Regards
Kumar

HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing.
I have tried a "hard reset" a number of times with no success.
When the battery is present the white LED flashes 3 times when the power button is pressed.
Please please help.

Hello Cuffy,
Welcome to the HP Forums!
I understand you notebook will not boot after a series of Windows updates.
Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this information helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Laptop not booting after recent Security patch - fixed

Similar Messages

Maybe you are looking for