Laptop not responding

can anyone tell me what to check my laptop turns on and has full charge on battery but will not open up any programs.

What Model Number?  What Operating System? 
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

  • Laptop not responding after hibernation mode is set off

    I had kept my laptop in hibernation mode before going out..After coming back when i pressed a key, the screen remained blank..i doubted if battery was down so plugged it in too, but no change. I can only see the green light for battery on and also the sign just near the power on button showing green light..the sign is a circle with a slanting z .. please help

    Clear out the cache memory.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.com/blogspot.com

  • I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either.

    I just updated itunes to 11.1.3 on my laptop and now it won't open. It does not respond to trying "safe mode" either. Anyone have an idea as to what to do?

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • My keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random.

    my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
    Is it a damaged keyboard ?
    The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.

    No one here works for Apple, so we don't know what Apple might or might not do.  If it's a genuine defect, they will of course repair it under warranty.  It is not their responsibility if it effects your ability to work or not, so that's on you.
    If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you.  And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
    Your only choice is to take it in for repair.

  • I have a Windows Vista desktop and an old XP laptop, both run Firefox perfectly. However, my Toshiba Satellite T135 laptop will not run ANY version of Firefox--constant "not responding" messages. Chrome and IE9 work perfectly. Help!!

    To mostly repeat my question, I am a longtime Firefox user on both an XP laptop and a Vista desktop. So here I get the most "capable" computer of all, a Toshiba Satellite T135 laptop, 64-bit Windows 7, 4G RAM...and it won't run Firefox at all! I have installed an uninstalled both Firefox 3, and just now, Firefox 4. No changes. When I open the software, it usually just locks up for a minute or so, and I finally get a "not responding" message at the top of the screen.
    Obviously there is something corrupt in the guts of my laptop. But both IE9 and Chrome work very well--Chrome is blazing fast. I still prefer Firefox because it works best with some particular software I use for work...but I have to go to one of my older computers to do it!
    ANY solutions out there? This seems like a very odd problem.
    Posting from the Firefox website...using Google Chrome!

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • TS3219 my ipad2 when connected to my laptop is not responding nor accepting the connection

    my ipad2 when connected to my laptop is not responding nor accepting the connection. My ipad was blocked to  return  to main menu while trying to updating  its IOS. How can we return to main menu?

    Take it to Apple

  • Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

    I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router  to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support.  The advisor took over my screen and we check that my laptop was synchronising   with I phots and it was.  The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

  • My Firefox Mozilla is reduced to a tiny rectangle (upper left of screen) and does NOT RESPOND to my attempts to use the Firefox browser. What happened? Would Firefox please RESTORE the Firefox browser to my laptop.

    I changed to Mozilla Firefox from Internet explorer months ago. Very pleased with features, service, etc. A couple of weeks ago, I got an update message while doing some work but did not install the update at the time. Another update message came up with an accompanying, confusing note indicating some dangerous possible consequences if I did not install the update.
    A few keystrokes later and my screen seemed to go haywire, and my laptop would not respond to my cursor. I shut down. When I restarted and went to the Firefox shortcut icon a tiny (1"x 1/4") replica of part of the normal Yahoo!/Firefox screen appeared and continues to do so each time I attempt to use Firefox. I'm now back to Internet explorer. HELP me get back to using Mozilla.

    Right-click on the Firefox image in that little Firefox window and see if '''Maximize''' is available in that context menu. If so, click on Maximize.
    To be clear, Yahoo!/Firefox is a modified version of the official Firefox program and may have faults that aren't in the official version.

  • Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only

    Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only the last dot is blinking. The power cable used to light up green initially but now the green light is gone. I have tried SMC reset, which didn't work. What are my options?

    Macbook Pro2067 wrote:
    <snip>
    What are my options?
    Take it to an authorized service center.

  • Open email & top of bar says fire fox not responding & get script error on page asking to stop script or continue. Loading most mail or sites is slow now that I returned from Japan and using same laptop. Any ideas?

    my laptop stops responding when I open email right in the middle of writing email or checking email and when I open bookmarks. Up the top it says firefox not responding and a script error block opens asking me to continue or stop script. It give me this same error all the time no matter if I select continue or stop script.

    As far as email sites go. The "Adblock Plus" extension with at least the "EasyList US" filter subscription would probably help. I does block a lot of unnecessary Script files whose sole purpose is to provide advertising. You can of course add additional filter subscriptions or filters of your own.
    There are many extensions that can cause such problems, and you may have to go through your extensions.
    One thing you might do is eliminate Problematic Extensions that you are not using, but mainly check to see how the create problems and you may have to make a choice between extensions. The Unresponsive Script Warning page lists some extensions with problems (thought it listed more) and describes how to check through your extensions to help find which extension is the problem Sometimes the message will tell you.
    * '''Problematic extensions''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Problematic_extensions
    * '''Unresponsive Script Warning''' - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Unresponsive_Script_Warning
    * Firefox hangs - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Firefox_hangs
    Here are some extensions I had a problem with, and don't use them any more
    : http://dmcritchie.mvps.org/firefox/infolister_listing_fx4.htm#scriptbusy
    * Line Marker, Firefox 1.0 - 1.5.0.* ALL (2.0.2006072201)
    * Quick Sum (0.1), presumably good for Firefox 2.0
    * Translate (0.6.0.9), Firefox 0.9 - 1.5.0.* ALL
    * gTranslate (0.3.1) [30KB], Firefox 1.0 - 2.0.0.* ALL
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it, but take your time and try to make sure you pick the answer that helped you, and tell us which extension or script you found to be the problem.</small>

  • Laptop touchpad, arrow not responding

    My mousepad/arrow pointer do not work unless I am safe mode. When I do a regular boot, I am able to point the arrow, but the program will not respond. I have no way of doing anything unless I am in safe mode.  

    Hi Kokorokas,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with touchpad not responding in your Lenovo U530 laptop.
    Connect an external mouse and check for the issue, also try to boot the system in safe mode and check for the issue.
    Try to check in different applications and also try to uninstall the drivers and restart the system and check for the issue.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • HT1212 My  fully charged iPhone screen is black and not responding. what can I do to get it to work again? I have never syncd on iTunes. I connected to my laptop and iTunes app displays error msg saying phone is locked and unlock phone to connect.

    My fully charged iPhone has a black screen and is not responding but has Siri and sound.  I connected to laptop and iTunes gives error msg indicating phone is locked and I to enter passcode. but I can't enter the passcode because the screen is black. I have never syncd with iTunes. What can I do to get my  phone back?

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Every new function causes (not responding), takes a long long time for each operation, everything else on new I7 laptop is fast.

    I installed firefox 4 and it starts slow but every function I try causes the term (not responding) on top and it can take several minutes for the function to finish executing. My PC is only 6 mos old with I7 processors, run Panda security software, I did all that your Troubleshooting instruction said to try but still not working correctly.

    Hi AquilaXXIII,
    What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
    update first,
    Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
    http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
    Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
    Understanding Cluster Validation Tests: Storage
    http://technet.microsoft.com/en-us/library/cc771259.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Opened the pop up password recovery window and it said not responding and when started responding all my passwords from the laptop and desktop were gone

    I opened the options>>security>>saved passwords pop up and clicked on show passwords and it said *not responding* for a bit and when it started responding my 100+ passwords and user names were all gone and the window was totally clear....any idea how to recover all those passwords?

    You need a backup copy or previous versions of the key3.db and signons.sqlite files to restore the passwords stored via the Password Manager.
    *http://windows.microsoft.com/en-US/windows-vista/Previous-versions-of-files-frequently-asked-questions
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Hello, I have tried downloading a music track and then backing up my phone, on the version of itunes i had on my laptop overnight. This morning myiphone is not responding and it has the connecting lead wire symbol and the itunes symbol on the screen.

    Hello, I ha tried downloading a music track, and tried backing up my iphone 5s last night. I left it connected overnight. This morning my 1phone 5s is not responding it shows the connection lead and the itunes symbol on the screen. I have tried pressing the home and power separtely for over 10 secs, and have pressed them together for over 12 secs, and there is no response.
    kind anyone please advise.

    You will need to do a restore
    Use iTunes to restore your iOS device to factory settings

Maybe you are looking for

  • Issue with 1131 AP

    AP 1130 (Autonomous) is converted in to LWAP and it has go the recovery image of “c1130-rcvk9w8-tar.123-7JX” We tried to associate with WLC in L3 mode by enabling DHCL option 43, LAP is initially getting associated with WLC and downloading the la

  • Is Role blocking possible?

    Hi All, There are many derive roles created in development and moved to quality and production environment. 1.Now is it possible to block selected bulk of roles for user assignment ?(So that these set of roles can not be assigned to any user in quali

  • Facing problem with RFC connections

    In the Maintenace View for RFC connections, when I press the 'Apply' button I am getting the message"You have no authorization to display the destinationu201D for all the 4 destination IDs" Can somebody suggest on how to overcome this problem? Thanks

  • Paper Gets Ejected

    I am using reports 6i. Report is Bitmapped. My report has 8.5 inches width and 5.5 inches height. I am using Panasonic dot matrix printer. I want that after printing my report that is of 5.5 inch height, the paper should not get ejected but it should

  • Forms 10g Screen flashing

    We are currently upgrading our Oracle Forms 6i applications into Forms 10g. During this process, we have encountered a screen flashing issue. The application is coded in such a way that there is one form that remains open and it keeps calling other f