Laptop not showing colors correctly

Hi,
We are trying to figure out why there should be a difference
in colors when viewed on a laptop, different colors too than on a
desktop, its NOT my site though.
The link:
www.pcnetsimplified.com
Thanks if you find time to look, and it may be you could know
the answer/solution without even looking. I happen to know there
are several clever Adobe Community Experts here.
Thanks!

It's not an Apple problem, really. Each monitor displays
colors
differently....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"misssulia" <[email protected]> wrote in
message
news:f8fkfh$di$[email protected]..
> Hi SnakEyez02,
>
> Well thanks for the very rapid response!
>
> Oooh dear me he is going to be one very frustrated guy,
I did advise going
> the
> usual route first properties/ settings, and looking at
those by right
> click
> desktop but on a laptop.
>
> I myself do not have the luxury of both enviroments
lolol So the web site
> is
> ready and send everything up but it will look naff for
all on a laptop
> yes?
> ~sharp intake of breath~ How does everyone else cope
with this.
>
> Has anyone contacted Apple about this dreadful problem.
Whats the point in
> paying an x amount of pounds for software only to find
that it does'nt
> display
> correctly on Apple gear.
>
> I am disguted with Apple.
>
> Thanks very much SnakEyez02
>

Similar Messages

Date difference is not showing the correct result for date interval

Hi Expert,
                I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010   for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
      it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit Kumar

Hi Expert,
                Through replacement path.
Thanks and Regards
Lalit Kumar

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Why is Acrobat 11 NOT showing colored backgrounds I have in my ID files?

Why is Acrobat 11 NOT showing colored backgrounds I have in my ID files? I can see them in Acrobat 10 just fine but I would prefer to switch up to 11...

http://answers.acrobatusers.com/PDF-Background-Appears-Grey-screen-paper-Acrobat-X-v10-00- q34894.aspx this fixed worked for me. Thanks for Facebook and https://www.facebook.com/adobeacrobat

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Labels Not Showing Up Correctly in Workflow Manager Web Page

I have installed the Workflow Server 2.6.3 on Red Hat 7.2 against the Oracle 10g database. When I go to the Workflow Manager web page and login, all the labels appear between brackets "[]" and have incorrect names such as the following:
WF_WORKFLOW_TITLE
WFA_WTITLE
OPEN_NOTIFICATIONS
WFA_FINDTITLE
WFRTG_FIND_TITLE
etc......
I ran the Configuration Assistant again and this didn't solve the problem and I've also verified that the mappings in the server configuration file are correct for OA_JAVA, OA_DOC, OA_MEDIA. Looked through workflow installation log and no errors appear. I installed the web server (Oracle Apache Standalone downloaded from OTN in a separate Oracle Home). Any ideas how to fix these incorrect labels or why they're not showing up correctly??
Thanks in advance,
Rich

Hi,
I've not seen the problem myself, but it seems that the language has not created the correct lookups in the WF_RESOURCES table.
If you look for a name of (for example) 'OPEN_NOTIFICATIONS', there should be an entry for the language you are using (US) which translates the prompt for you. If it's not there then you will probably need to add a language through the installer - I don't think there is a SQL file that you can just run to do it. Alternatively, install it in a new environment and then just extract the resources you need from that system and insert them into this one.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Lightroom 4.1 can not show text correctly

lightroom 4.1 can not show text correctly when publish in PDF and blurb format
the text can be show correctly in JPEG format
but lightroom 4.0 can show correctly with the same book.
i cant publish my book on blurb now

I don't think LR4 adjustments can be directly sent to CS4, because CS4 cannot interpret LR4's new processing engine.
I think you have to use Edit In... and create a TIF or PSD and send those to CS4

My storage is not showing the correct space

Hi,
Why my storage is not showing the correct amount of space? I have MBA mid 2013 with 121gb. However my storage show a different value than its suppose to be especially on the apps. I google the problem, mostly its because of the time machine but I never use the time machine. and some of my friend tells its probably a junk. is the third party apps like apps cleaner and clean my mac is helpful? I attached the screen capture of my storage. As you can see the value of apps is 162gb in fact my flash is only 121gb. its doesn't make any sense. Please help.

Do not use third party apps such as CleanMyMac on your Mac. They have no effect what so ever on storage space. Your Mac runs maintenance in the background for you > Mac OS X: About background maintenance tasks
Reindex Spotlight then check the storage > Spotlight: How to re-index folders or volumes

The colors are not showing up correctly on my site like they do in photoshop and explorer.

Why don't the colors show up correctly in Firefox? They are exactly the same color yet firefox shows them as slightly different. I checked them in Photoshop. Same hexadecimal, same RGB. It looks correct in Internet Explorer but does not in firefox. The color is: hexadecimal: #0FCFF3, RGB: 15,207,243.

This can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.<br />
Try to disable color management to test if it is caused by a problem with color management.<br />
You can set the gfx.color_management.mode pref to 0 on the about:config page to disable Color Management.<br />
You need to close and restart Firefox to make the change effective.
See:
* http://kb.mozillazine.org/gfx.color_management.mode
*http://kb.mozillazine.org/about:config

Color picker in iOS 8 app built against AIR 16 not showing up correctly

I am using Flash CS6 to publish a coloring book app for Android and iOS. As of AIR SDK 15, the ColorPicker no longer shows up correctly in iOS, though the code continues to work correctly on Android. I have tried both AIR 15 and 16, and neither works correctly on iOS (only tested against iOS 8).
The color picker from iOS8, AIR SDK 14 (as it should appear):
The color picker from iOS 8, AIR SDK 16 (with black boxes covering each sample):
Functionally they both work and there was no change to the code between the two builds. Anyone experience a similar issue or have ideas on navigating around it?
Oh, here is the code I use to generate the colorpicker, in case it is useful:
//Color picker colorPicker = new ColorPicker();
colorPicker.setStyle("swatchWidth", swatchWidth);
colorPicker.setStyle("swatchHeight", swatchHeight);
colorPicker.setStyle("selectedColor", 0xffffff);
colorPicker.colors = [0x330033, 0x000066, 0x330099, 0x3300cc, 0x3300ff, 0x6600ff, 0x6600cc, 0x660099, 0x660066, 0x660033,0x660000,0x330000,0x000000, 0x000033, 0x000066, 0x000099, 0x0000cc, 0x0000ff, 0x333333, 0x333366, 0x333399, 0x3333cc, 0x3333ff, 0x6633ff, 0x6633cc, 0x663399, 0x663366, 0x663333,0x663300,0x333300,0x003300, 0x003333, 0x003366, 0x003399, 0x0033cc, 0x0033ff, 0x336633, 0x336666, 0x336699, 0x3366cc, 0x3366ff, 0x6666ff, 0x6666cc, 0x666699, 0x666666, 0x666633,0x666600,0x336600,0x006600, 0x006633, 0x006666, 0x006699, 0x0066cc, 0x0066ff, 0x339933, 0x339966, 0x339999, 0x3399cc, 0x3399ff, 0x6699ff, 0x6699cc, 0x669999, 0x669966, 0x669933,0x669900,0x339900,0x009900, 0x009933, 0x009966, 0x009999, 0x0099cc, 0x0099ff, 0x33cc33, 0x33cc66, 0x33cc99, 0x33cccc, 0x33ccff, 0x66ccff, 0x66cccc, 0x66cc99, 0x66cc66, 0x66cc33,0x66cc00,0x33cc00,0x00cc00, 0x00cc33, 0x00cc66, 0x00cc99, 0x00cccc, 0x00ccff, 0x33ff33, 0x33ff66, 0x33ff99, 0x33ffcc, 0x33ffff, 0x66ffff, 0x66ffcc, 0x66ff99, 0x66ff66, 0x66ff33,0x66ff00,0x33ff00,0x00ff00, 0x00ff33, 0x00ff66, 0x00ff99, 0x00ffcc, 0x00ffff, 0xccff33, 0xccff66, 0xccff99, 0xccffcc, 0xccffff, 0xffffff, 0xffffcc, 0xffff99, 0xffff66, 0xffff33, 0xffff00, 0xccff00,0x99ff00, 0x99ff33, 0x99ff66, 0x99ff99, 0x99ffcc, 0x99ffff, 0xcccc33, 0xcccc66, 0xcccc99, 0xcccccc, 0xccccff, 0xffccff, 0xffcccc, 0xffcc99, 0xffcc66, 0xffcc33, 0xffcc00, 0xcccc00,0x99cc00, 0x99cc33, 0x99cc66, 0x99cc99, 0x99cccc, 0x99ccff, 0xcc9933, 0xcc9966, 0xcc9999, 0xcc99cc, 0xcc99ff, 0xff99ff, 0xff99cc, 0xff9999, 0xff9966, 0xff9933, 0xff9900, 0xcc9900,0x999900, 0x999933, 0x999966, 0x999999, 0x9999cc, 0x9999ff, 0xcc6633, 0xcc6666, 0xcc6699, 0xcc66cc, 0xcc66ff, 0xff66ff, 0xff66cc, 0xff6699, 0xff6666, 0xff6633, 0xff6600, 0xcc6600,0x996600, 0x996633, 0x996666, 0x996699, 0x9966cc, 0x9966ff, 0xcc3333, 0xcc3366, 0xcc3399, 0xcc33cc, 0xcc33ff, 0xff33ff, 0xff33cc, 0xff3399, 0xff3366, 0xff3333, 0xff3300, 0xcc3300,0x993300, 0x993333, 0x993366, 0x993399, 0x9933cc, 0x9933ff, 0xcc0033, 0xcc0066, 0xcc0099, 0xcc00cc, 0xcc00ff, 0xff00ff, 0xff00cc, 0xff0099, 0xff0066, 0xff0033, 0xff0000, 0xcc0000,0x990000, 0x990033, 0x990066, 0x990099, 0x9900cc, 0x9900ff, 0x000000, 0x333333, 0x666666, 0x999999, 0xcccccc, 0xffffff, 0xff0000, 0x00ff33, 0x0000ff, 0xffff00, 0xff00ff, 0x00ffff];
colorPicker.selectedColor = color;
colorPicker.x = gWidth - buttonSize - 10; colorPicker.y = 5;
colorPicker.addEventListener(ColorPickerEvent.CHANGE, changeHandler);
//Colorpicker button;
colorPicker.width = buttonSize;
colorPicker.height = buttonSize;
shapeTransform = new ColorTransform();
shapeTransform.color = color;
addChild(colorPicker);

I have exactly the same problem in one of my apps - it worked perfectly well when published with air 14 but I am getting the black squares when published with air 15 or 16.
Anyone know how to get around this or whether there is a solution to the issue?

HP Photosmart 7525 not printing color correctly

HP Photosmart 7525 will not print color from any application.
Operating system: Windows 7 Home Premium.
Grayscale is not on.
Tried printing with discolored background correction
Tried each of the color management options separately from discolored background correction and combined with it.
Replaced the ink, and the result was worse!
The quality report shows no color ink whatsoever, and from the display, it looks like the printer believes it has no color ink left.

Attempted to clean cartridges and align the printer through the display pad: no luck.

Images edited in Photoshop not showing up correctly in Lightroom after saving

Hi,
I recvently got Adobe cloud and upgraded from Lightroom 3 to 4. Since the upgrade I have been having issues with Lightroom not correctly displaying images edited in Photoshop. Instead of the photoshop image it creates a new jpeg and displays that in the library. the PSD does not get loaded into the library.
I am taking a jpeg from my library and shoosing the edit in Photoshop function. I am selecting edit a copy, but have tried it with original and with edit a copy with lightroom adjustments as well with the same results.
In Photoshop I am duplicating the base layer, upscaling the image, running some filters, adding dsome adjustment layers.
I save the image in Photoshop format back to the original folder where the initial jpeg was in the Lightroom library. I save it with maximize compatibility on.
When I go back to Lightroom, the catalog displays two files, the initial jpeg and an identical copy to it, NOT the new photoshop file with alterations. If I go to the folder the images are housed in in Finder using the show in Finder command both images link to the same original jpeg. The photoshop edited file is there in the folder but does not show up in Lightroom unless I drag and drop it.
I have turned off all filters and made sure the sort is sorting by name. The image does not automatically show up in Lightroom after editing. Any suggestions?
Thanks for any help!
PS. I did search the topic and there are threads from 2007 and lightroom 2 but their solution was to start from scratch essentially and I have a carefully tagged, starred, and labeled catalog of 30,000+ images and really don't want to do that

Images that are edited in Photoshop will be displayed automatically in Lr only when the image-file saved in Photoshop is the same as the one opened from Lr.
You say you open a JPG from Lr, then edit it in PS by - among other things - adding some layers. Layers are not supported in the JPG-format so you have to either save it as a psd or as a jpg-copy.
In either case this is not the same image file as the one opened in Lr, so it will have to be imported into Lr to show up. If you would flatten your image after editing in PS and then do a <save> to your JPG - not a <save as> - it will show up in Lr.
PS: the only exception is when you open a Raw image from Lr in PS and you save it in PS in the file format specified in Lr for external editing. The saved file will automatically show in LR.
Message was edited by: web-weaver; PS added

New cube laptop - not showing Maxtor external hard-drive in windows explorer, but showing up in Device manager.

Hi
If anyone is able to give me some advice I'd really appreciate it. I have seen similar issues on here and tried uninstalling then re-installing the driver which seemed to fix the similar issue on someone's Windows 7 system but it doesn't seem
to have worked for me. I also tried using the usb 2 drive rather than the usb 3.
I have a new cube laptop with Windows 8 (which I'm not used to yet at all) and am trying to access the files from the Maxtor hard-drive from my old pc. The hard-drive does not show up under file explorer but seems to appear in device manager. The
laptop makes noises occasionally as if it is detecting some hardware but not showing it.
Can anyone suggest a fix?
Thanks in advance
Sadie

Hi,
Apologize for the late reply.
How about the situation by now?
Could the external hard drive be shown in the
disk management?
Or take a look at the format of that hard drive(list disks) with diskpart command:
A Description of the Diskpart Command-Line Utility
Check if the format is NTFS.
Also please take a look at the following article:
Help! After installing Windows 8.1, my USB drive disappears or file transfers
stop unexpectedly…
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Laptop not showing colors correctly

Similar Messages

Maybe you are looking for