Laptop on but only black screen nand loud beeping

Widescreen compac presario f500

Hello moscoe123,
Thanks for posting on the HP Forums!
I understand the computer will not start properly and a black screen remains. I apologize for the delayed response, but I will do my best to assist you! To troubleshoot the issue, please try the steps in this HP document: Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
The document lists useful steps starting with resetting the product. More specific steps are explained depending on your issue.
In regards to the beeps, there could be a few different causes. Since a beep/sound pattern wasn't mentioned, I'll just provide all this information for you to review, and you can try the suggested troubleshooting:
Computer Does Not Start and the LEDs Blink or the Computer Beeps
BIOS Beep Codes
I believe this troubleshooting will resolve the issue. If not, I would contact HP phone support for further assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thank you for posting on the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Similar Messages

  • TS3274 My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Mac book pro was working normal but after shutdown I try to start but not start only black screen

    My mac book pro was working normal , I shut down proper and I want to start again I press power button for start but not start , only black screen same on shut down position , so how can I start my mac book pro again

    Try SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • Testing app on device shows only black screen.

    Hi,
    I created hello world app, app is working fine on simulator,
    But when I install this app on device, and launch it from devie it shows only black screen. I am not sure whats the possible reason for this.
    Device which I am using is Intex cloud fx.
    Does any here faced this problem?
    Thanks

    Hi Malkit Singh,
    I'm sorry to hear that you're having problems installing a test app that you developed for your Intex Cloud Fx.
    Unfortunately, I have not heard of this issue. Do you have a different Firefox OS device that you would be able to test this on?
    I would also suggest contacting Intex Support for device-specific issues.
    If you believe there might be something wrong with the code in the test app, you can ask developer-related questions on [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow].
    Please let us know if you have any other questions about your new Firefox OS device! =)
    - Ralph

  • Connecting my iphone to mac laptop hung and shows black screen

    whenever i connect my iphone to my mac laptop. laptop hungs and shows black screen. I even tried connecting it to windows causing it to crash.
    Any problem with IOS 6. mine is iphone 4S running ios 6.
    please suggest any solution.

    i have no idea but i will find out.
    it recognises that the livebox is switched on though and asks if i want to connect so does that mean its not the n network
    Message was edited by: hrh_23

  • Laptop + Xfce + Xorg + Catalyst = black screen

    Hello this is my configuration
    Xorg: 1.5.3-4
    Xfce: 2.4.3-1
    Catalyst: 8.12-1
    Card: Radeon Xpress 200M
    after system update when I startx x i get only black screen and can do nothing, keyboard and mouse don't answer only restart help
    this is my xorg.conf
    # Auto-generated by Archie mkxcfg
    # Auto-generated by Archie mkxcfg
    Section "ServerLayout"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "freetype"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "pl"
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "All"
    BoardName "All"
    BusID "PCI:1:5:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    this is my Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux myhost 2.6.27-ARCH #1 SMP PREEMPT Mon Dec 8 22:01:01 UTC 2008 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 21 22:10:47 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "USB Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:5:0) ATI Technologies Inc RC410 [Radeon Xpress 200M] rev 0, Mem @ 0xb0000000/0, 0xfa8f0000/0, I/O @ 0x00009800/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) Primary Device is: PCI 01@00:05:0
    (WW) Falling back to old probe method for fglrx
    (II) ATI Proprietary Linux Driver Version Identifier:8.56.4
    (II) ATI Proprietary Linux Driver Release Identifier: 8.561
    (II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
    (WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
    (WW) Video driver ABI version of the X server is 4.1
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:5:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:6:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:7:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:3) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:4) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:5) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    (--) Chipset Supported AMD Graphics Processor (0x5A62) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:5:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:6:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:7:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:3) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:4) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:5) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) fglrx(0): pEnt->device->identifier=0x97f8188
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): PCI bus 1 card 5 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
    (II) fglrx(0): 10BitPixelFormat disabled by default
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.56.4
    ABI class: X.Org Server Extension, version 1.1
    (--) fglrx(0): Chipset: "ATI Radeon Xpress Series" (Chipset = 0x5a62)
    (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1402)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
    (--) fglrx(0): MMIO registers at 0xfa8f0000
    (--) fglrx(0): I/O port at 0x00009800
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 2.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI RADEON XPRESS 200M Series
    (II) fglrx(0): VESA VBE OEM Software Rev: 1.0
    (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: MS4
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports PCI:1:5:0
    (II) fglrx(0): Using adapter: 1:5.0.
    (II) fglrx(0): [FB] MC range(MCFBBase = 0x1c000000, MCFBSize = 0x4000000)
    (--) fglrx(0): Video RAM: 65536 kByte, Type: DDR SGRAM / SDRAM
    (II) fglrx(0): PCIE card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: AUO Model: 2174 Serial#: 0
    (II) fglrx(0): Year: 2005 Week: 1
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Digital Display Input
    (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 21
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): No DPMS capabilities specified
    (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
    (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 71.1 MHz Image Size: 331 x 207 mm
    (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
    (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
    (WW) fglrx(0): Unknown vendor-specific block f
    (II) fglrx(0): AUO
    (II) fglrx(0): B154EW02 V1
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff0006af742100000000
    (II) fglrx(0): 010f0103802115780a1cf59758508e27
    (II) fglrx(0): 27505400000001010101010101010101
    (II) fglrx(0): 010101010101c71b00a0502017303020
    (II) fglrx(0): 36004bcf100000180000000f00000000
    (II) fglrx(0): 00000000000000000020000000fe0041
    (II) fglrx(0): 554f0a202020202020202020000000fe
    (II) fglrx(0): 004231353445573032205631200a00aa
    (II) fglrx(0): End of Display1 EDID data --------------------
    (WW) fglrx(0): Only one display is connnected,so single mode is enabled
    (II) fglrx(0): Primary Controller - LCD on internal LVDS
    (II) fglrx(0): Internal Desktop Setting: 0x00000001
    (II) fglrx(0): POWERplay version 3. 1 power state available:
    (II) fglrx(0): 1. 337/333MHz @ 60Hz [enable load balancing]
    (==) fglrx(0): QBS disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 12 modes found for primary display.
    (--) fglrx(0): Virtual size is 1024x768 (pitch 0)
    (**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 71.11 1024 1200 1224 1440 768 787 793 823 (49.4 kHz)
    (**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 71.11 800 1088 1112 1440 600 703 709 823 (49.4 kHz)
    (**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 71.11 640 1008 1032 1440 480 643 649 823 (49.4 kHz)
    (**) fglrx(0): Default mode "848x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0 71.11 848 1112 1136 1440 480 643 649 823 (49.4 kHz)
    (**) fglrx(0): Default mode "720x576": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0 71.11 720 1048 1072 1440 576 691 697 823 (49.4 kHz)
    (**) fglrx(0): Default mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0 71.11 720 1048 1072 1440 480 643 649 823 (49.4 kHz)
    (**) fglrx(0): Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 71.11 640 1008 1032 1440 400 603 609 823 (49.4 kHz)
    (**) fglrx(0): Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x350"x60.0 71.11 640 1008 1032 1440 350 578 584 823 (49.4 kHz)
    (**) fglrx(0): Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 71.11 512 944 968 1440 384 595 601 823 (49.4 kHz)
    (**) fglrx(0): Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0 71.11 400 888 912 1440 300 703 709 823 doublescan (49.4 kHz)
    (**) fglrx(0): Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0 71.11 320 848 872 1440 240 643 649 823 doublescan (49.4 kHz)
    (**) fglrx(0): Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0 71.11 320 848 872 1440 200 603 609 823 doublescan (49.4 kHz)
    (--) fglrx(0): Display dimensions: (330, 210) mm
    (--) fglrx(0): DPI set to (78, 92)
    (--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
    (**) fglrx(0): *Mode "1024x768": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 71.11 1024 1200 1224 1440 768 787 793 823 (49.4 kHz)
    (**) fglrx(0): *Mode "800x600": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 71.11 800 1088 1112 1440 600 703 709 823 (49.4 kHz)
    (**) fglrx(0): *Mode "640x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 71.11 640 1008 1032 1440 480 643 649 823 (49.4 kHz)
    (**) fglrx(0): Default mode "848x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0 71.11 848 1112 1136 1440 480 643 649 823 (49.4 kHz)
    (**) fglrx(0): Default mode "720x576": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0 71.11 720 1048 1072 1440 576 691 697 823 (49.4 kHz)
    (**) fglrx(0): Default mode "720x480": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0 71.11 720 1048 1072 1440 480 643 649 823 (49.4 kHz)
    (**) fglrx(0): Default mode "640x400": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 71.11 640 1008 1032 1440 400 603 609 823 (49.4 kHz)
    (**) fglrx(0): Default mode "640x350": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x350"x60.0 71.11 640 1008 1032 1440 350 578 584 823 (49.4 kHz)
    (**) fglrx(0): Default mode "512x384": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 71.11 512 944 968 1440 384 595 601 823 (49.4 kHz)
    (**) fglrx(0): Default mode "400x300": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0 71.11 400 888 912 1440 300 703 709 823 doublescan (49.4 kHz)
    (**) fglrx(0): Default mode "320x240": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0 71.11 320 848 872 1440 240 643 649 823 doublescan (49.4 kHz)
    (**) fglrx(0): Default mode "320x200": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0 71.11 320 848 872 1440 200 603 609 823 doublescan (49.4 kHz)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 4.1
    (==) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (II) fglrx(0): [pcie] 262144 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (II) fglrx(0): Direct rendering enabled
    (II) fglrx(0): AC Adapter is used
    (II) fglrx(0): Interrupt handler installed at IRQ 17.
    (II) fglrx(0): Exposed events to the /proc interface
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
    (II) fglrx(0): detected X.org 7.4.3.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): DRIScreenInit for fglrx driver
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports PCI:1:5:0
    (II) fglrx(0): [drm] DRM interface version 1.0
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:5:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
    (II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7fa5000
    (II) fglrx(0): [drm] framebuffer handle = 0x3000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.56.4
    (II) fglrx(0): Date: Dec 1 2008
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x00004000
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0x1c000000 FBMappedSize: 0x00508000
    (II) fglrx(0): FBMM initialized for area (0,0)-(1024,1288)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1024 x 520
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (II) fglrx(0): DPMS enabled
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Setting up tile and stipple cache:
    16 128x128 slots
    4 256x256 slots
    (II) fglrx(0): Acceleration enabled
    (II) LoadModule: "amdxmm"
    (II) Loading /usr/lib/xorg/modules//amdxmm.so
    (II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [DRI] installation complete
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:5:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports PCI:1:5:0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    Please help
    Last edited by bl0ndynek (2008-12-21 21:33:13)

    Can you Ctrl-Alt-Backspace out of the X server?
    Nothing jumps out at me in your X server log.  You can try paring your xorg.conf down to a minimum and try and let X figure it all out.  Here's mine, for example:
    Section "Device"
    # Identifier "VideoCard"
    # Driver "fglrx"
    # Option "monitor-PANEL" "InternalLCD"
    #EndSection
    Section "Device"
    Identifier "VideoCard"
    driver "radeonhd"
    Option "monitor-PANEL" "InternalLCD"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "VideoCard"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Section "DRI"
    Group "video"
    Mode 0660
    EndSection
    You can comment out (or delete) the "Device" section that has radeonhd in it, and uncomment the fglrx one (I haven't tried fglrx on Arch64 yet, but plan to to see if it resolves some issues I'm having).

  • HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

    Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Logging out does not drop me to console but a black screen

    Recent pacman -Syu upgraded me to latest xorg-server and I have this problem: logging out does not drop me back to console but a black screen and after 30 seconds, a blinking cursor. Nothing works and I have to reboot. If I choose to reboot (instead of logout) I get the same result except that eventually the computer reboots. Using nv - no problems. Using simple nvidia (single screen) - no problem. (I have a monitor and tv-out setup). Problem remains whether I use xfce4 or fluxbox. And the ctrl-alt-backspace keyboard shortcut results in the same black screen. Xorg.0.log tells me nothing. Before the upgrade, no problem.
    I usually use startx and I have ck-launch-session etc in my .xinitrc. I use the latest nvidia-96xx driver and have no other X problem. Everything works, including the tv-out.
    This is a minor inconvenience really and I usually switch to a console and as root killall X if I need to log myself out for any reason. But if anyone as a clue as to why this is so, or suffers the same problem, do let me know. Thanks.

    Thanks guys...
    @ckristi - I don't use kdm. I startx from console when I want to go into X.
    @madtux - I guess I will have to read up on kernel mode setting and KMS - I actually don't know what you are referring to although I have seen KMS refered to in this forum with reference to xorg. Any links? Do note no problems with nv and single monitor nvidia. Hopefully the cure is not worse than the disease.

  • I restored my 3gs iphone and now it shows only black screen with apple mark... dont know what to do?

    i restored my 3gs iphone and now it shows only black screen with apple mark... dont know what to do?

    I would suggest you try to update your iOS 8.0.2 to the latest iOS 8.1.0 with iTunes on your computer. Don't try to do the update on your iPhone, it takes time and some error always occur. After updating to iOS 8.1.0, if your iPhone can't restart properly, try Wondershare Dr.Fone for iOS trial version. It will say that your iPhone is not in normal mode, offering you the option 'restart the device'. Just click the button to let your iPhone restart.

  • IPad2 with iOS7 shows only black screen. Cannot restart. What do we do.

    iPad2 with iOS7 shows only black screen. Cannot restart. What do we do.

    Try a reboot:
    press and hold the home and power buttons until the Apple icon is displayed, then let go.

  • HT201263 my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

    my ipod touch 4th gen isnt work after a long time with 0 percent battery power.Then its not working. computer doesnt respond to my ipod .only black screen is appearing it even not wake up after reset it what can i do please help me

    After being connected to a charging source overnight try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • I see only black screen windows when upload pdf documents in safari

    Hi. I see only black screen windows when upload pdf documents in Safari. Also in old version of Safari, and in old System. In some windows, i can save the document, only now i can see this, open from pdf reader. Thank for some info.

    Back up all data.
    In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • My Old IMac G5 kaput, its on or seems to be on but its black screen can't do anything, though all my pictures I want and my itunes library...I got a Macbook and do use a Time machine, but can't get to old files,

    My Old IMac G5 kaput, its ON or seems to be ON but its black screen can't do anything, though all my pictures and files are there.  I want my photos and my itunes library Can't seem to get them.  ( I have not been able to share them to my phone or lap top anymore ever since my G5 flipped ) I got a Macbook and got it connected to the Time machine.  Trying to Migrate them here from my time machine, but I have not been able to so far. Can somebody help..?
    [email protected]
    Thank you  ;- )

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • When Firefox is opened, nothing shows up but a black screen and the program is not responding. How can I repair this?

    When Firefox is opened, nothing shows up but a black screen and the program is not responding. How can I repair this?
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

    iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

    Did anything happen to prior to your phone acting this way? It sounds like your screen is dead, but it is hard to say without knowing what what the cause.
    1) was this a gradual problem? Did the phone screen start dimming a couple months ago and now has degraded or after some event (known or unknown to you), the phone started behaving this way.
    2) Can you give more specifics on the problem? You said you have a black screen, but also you can see what you're doing on screen. Is the screen just really dim? Is the screen completely black? Does anything else besides attempting to reset the device cause it to flash white?

Maybe you are looking for

  • Because of error 513, no message was created in Support Desk System

    Hello all... Currently setting up Service Desk and when I create a service message in my satellite systems (ECC DEV, QAS, PRD, etc.), I get the error 513 as described in my subject line. I am able to create messages within the Solution Manager enviro

  • ELM - Duplicate Check, Mapping Format, Create BP in Role

    Hi, I have 3 requirements with respect to ELM (CRM 7.0 Ehp1) 1. Update CRM BP, if external ID/ID type combination occurs again 2. Create BP in a specific role 3. Map extra fields With the help of multiple threads, I have found that I need to use BAdI

  • ITunes keeps closing unexpectedly..

    I am trying to upload files (videos) from my music folder into my itunes library. they are previously purchased files from itunes, and whenever i pull them in there itunes closes. ive tried restarting and reinstalling..

  • Coulnd not resolve mx:script "or" mx:operation to a component implementation

    i'm execising flex builder 2's help lessons step by step. i'm coding what the guide tell but i've problem when i use <mx:script> tag or <mx:operation> tag. i couldn't find why it is like that and so i couldn't solve the problem. i'm giving you the 2

  • Customer adapter module

    I'm developing one customer adapter module that calls stored procedure on sender side. I'm not able to stop process when Resultset is empty. As interface is firing every 60s, it is happening quite often and I want to avoid this, like std. JDBC adapte