Laptop Ram upgrade

i have a hp 1301 tx laptop and i would like to know about my ram upgradation well on properties i saw my ram type is D ram 1333 and i have ordered for kingston 2 gb ram which has 
Memory Type: 2 GB (64 x 256 MB) 1333 MHz DDR3 SO-DIMM
Memory StandardDR3-1333/PC3-10600
it will work with my laptop ??
This question was solved.
View Solution.

Hi:
I sure hope so, since you ordered first and asked questions afterward. 
Yes, if that is what your PC's memory specs state, that memory you ordered should work just fine.
There are several HP 1301 tx notebooks out there, so I don't know which one you have.
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&dlc=en&lc=en&os=228&sw_lang=&tool=&query=hp+1301+tx+
Paul

Similar Messages

  • HP 240 G3 Laptop RAM Upgrade Help

    Hi! I just purchased a HP 240 G3 laptop, and would like to upgrade RAM to 8 GB.Here are the laptop specs as obtained from HP support assistant: Model: HP 240 G3 Notebook PCProduct No.: M1V30PA#ACJProcessor: Intel(R) Pentium(R) CPU  N3540  @ 2.16GHzOS: Win 8.1Current RAM: 2GB  Hynix Semiconductor 1333MHz (DDR3) Can I go for a 8GB Transcend 1600 MHz, or should I just get 1333 MHz?Laptop supports upto 8 GB as per seller's brochure.There is only one slot. Any help would be greatly appreciated!Cheers.

    Here is the Manual: Service manual The Manual actually says if I am reading it right that the Bay Trail models have 2 memory slots. I am skeptical. Does yours have a service cover for the memory? If not, it is going to require motherboard removal to get to it.  It appears that DDR3L-1600 memory is compatible with all versions of this model of laptop although some will downclock to 1333.  The Official HP Part number for an 8 gig module is: 8-GB (PC3L, 12800, 1600-MHz) 693374-001  If this is "the Answer" please click "Accept as Solution" to help others find it.  

  • RAM upgrade on Satellite L300-20D

    I was wondering if the laptop L300 - 20D.
    Can get a ram upgrade. It has 1024 MB RAM 800MHZ. And i need 1500 MB .

    Your notebooks RAM can be upgraded up to 4 GB.
    For upgrade you can use follow RAM modules:
    512MB DDR2-667 - PA3511U-1M51
    1GB DDR2-667 - PA3512U-1M1G
    1GB DDR2-800 - PA3668U-1M1G
    2GB DDR2-667 - PA3513U-1M2G
    2GB DDR2-800 - PA3669U-1M2G
    Bye

  • Ram Upgrade for T60

    Hi,
     I have IBM T60 laptop with 1 GB ram.  I want to upgrade the ram to 2 GB.  According to the lenovo site I need to install this ram
    2GB PC2-5300 NP DDR2 SDRAM SODIMM.
    40Y77352GB PC2-5300 DDR2 SDRAM SODIMM
     http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62761
    Should we have to install the ram recommended by IBM/Lenovo for T60.
    Are there any alternatives from a different company.

    Welcome to the forum!
    Any laptop RAM spec'd at PC5300 or higher will work. You can shop around for the best deal you can find. FYI, IBM or Lenovo don't manufacture their own RAM sticks, but get it from other companies (Hynix, Samsung, Elpida, Micron) and re-brand it.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Intel Rapid Start stops working when RAM upgraded

    I have a brand new ENVY dv7-7212nr notebook running Windows 8 64-bit.
    This machine has Intel Rapid Storage Technology which caches hard disk data (I think on the 32GB SSD) and Intel Rapid Start Technology which stores active memory in the SSD cache (I think) when the computer enters a hibernation state.
    The first thing I did was upgrade the RAM from 8GB to 16GB.  It works fine, but then I get an error message "your system does not appear to have intel rapid start technology enabled."
    HP provides very little information on this, basically none.  I assume the memory is being cached on the SSD, but I don't know how to verify this.  Also I notice that acceleration is not enabled under the Rapid Storage Tecnology applet for either drive.
    I called tech support twice but the techs knew nothing about upgrading RAM beyond the usual and couldn't get it to work either.
    Does anybody even know exactly how the SSD is being used in my system?  That would be valuable information to me.
    Thanks in advance!
    This question was solved.
    View Solution.

    Thanks for reading my reply.
    The "little SSD" is still a drive and not a chip, although you are right that it is little and it is attached to the motherboard. It is little because its form factor is not the typical 2.5 inch size but what's call "mSATA". In fact, the service manual for this dv7-7212nr laptop shows you how you can remove and replace or upgrade this mSATA SSD:
    Below is a comparison of how small the mSATA form factor is to other drive sizes (from Left to Right: mSATA, 1.8", 2.5", 3.5"):
    So if I want to replace the mSATA 32 GB SSD with a 64 GB SSD, I would have to get a mSATA SSD, not the typical 2.5" ones. So for this dv7-7212nr laptop, there can be 3 total drives installed: one in the mSATA slot and two in the 2.5'' drive bays. However, the default configuration as sold by HP only has one mSATA 32 GB SSD and one 750 GB SATA hard drive, with the remaining drive bay empty.
    This dv7-7212nr laptop does contain all the latest (and perhaps more complex) technologies and HP probably does not expect the typical user/consumer to go and muck around all the default settings. However, if one is curious and willing to make the effort to learn, the material is just a google search away.
    Here are the instructions for setting up Intel Rapid STORAGE Technology (aka Intel Smart Response Technology): http://download.intel.com/support/chipsets/sb/intel_smart_response_technology_user_guide.pdf
    For this dv7-7212nr laptop, you can ignore steps 1-4 because the BIOS is already configured properly from the factory (unless some changes were made by the end user).
    Here are the instructions for setting up Intel Rapid Start Technology:
    http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide_v11.pdf
    For this particular laptop, ignore steps 1-7 but it is important to do this first: set up Intel Smart Response Technology as above, making sure to allow enough space on the SSD for a hibernation partition that is equal to or greater than the total size of RAM installed. Then follow steps 8 to the end of the guide.  It is important to set up Intel Smart Response before Intel Rapid Start because Intel Smart Response will destroy all partitions and data on the disk (if you set up a hibernation partition for Intel Rapid Start first, it will be removed when you set up Intel Smart Response).
    I have successfully ENable and DISable these technologies on my laptop using the above guides (with my modifications). WARNING: back up all data before trying any of this.
    In your case, I agree that you can also disable Rapid START and just use the whole SSD for acceleration along with the 16 GB RAM upgrade.
    [Edit: update link]

  • Battery drains while sleeping after RAM upgrade

    Installed 16 GB of RAM and a Hybrid/SSD 1 TB internal HD on MacBook Pro 15" mid 2012 and now the battery drains while the computer is in sleep mode, about 1-3 % per hour. Before the RAM upgrade (stock 4 GB of RAM) there was no noticeable battery drain, so I assume it has to do with the upgrade. I read that it takes more power to maintain 16 GB of RAM during sleep, so my questions are as follows:
    Is 1-3% per hour normal?
    Will resetting the SMC help the issue?
    Does the Hybrid HD have anything to do with this?
    I am not too happy about the battery drain as it happens that I don't use my laptop for some time and prior to the upgrade the loss of battery charge was not an issue at all. Is this the price I have to pay for maxing out my RAM or is there a way (resets, settings, etc) to reduce the amount of battery loss
    Thanks for your input.

    Hi everybody. I have the same question. I have a macbook unibody late 2008. I have recently upgraded the OS to Yosemite. In order to have a smoother functioning of the system I have immediately replaced my original 2Gb (1+1) RAM with 8 Gb (4+4). Since then, I have noticed a dramatic reduction of my battery charge during sleep mode. Now after 8 hours of sleep it goes from 100% to around 65% (before it was 95%). Is it a natural consequence of having installed a larger RAM or there could be anything wrong with my settings?
    I have read a couple of articles about standby mode and standbydelay setting but this does not apply to my model of macbook.
    Here is my pmset -g result:
    Active Profiles:
    Battery Power        -1*
    AC Power        -1
    Currently in use:
    hibernatemode        3
    acwake               0
    lidwake              1
    halfdim              1
    sleep                20 (sleep prevented by AddressBookSour)
    ttyskeepawake        1
    sms                  1
    hibernatefile        /var/vm/sleepimage
    disksleep            10
    displaysleep         2
    Thanks a lot for any comment / suggestion /hint.
    Bye

  • Lenovo G40 ~ 70 ram upgrade problem

    I bought a lenovo G40 ~ 70 laptop and I wanted to upgrade my ram.It contains 4gb ram and I wanted to upgrade it to 8gb .What type of ram card should I buy and after the upgrade will my computer have problems? thank you.

    Hi Ayato,
    Welcome to the Forums  
    As per the query we understood that you are looking for RAM upgrade for your Lenovo G40-70 laptop.
    As per the specification of this model , the maximum memory supported by this model is upto 16GB DDR3L 1600Mhz.Hence I would suggest you to look into DDR3L RAM as the RAM slots in the laptop will only support the same. And "L" in DDR3L refers to low voltage.
    Click here for the model specification.
    Hope this helps. Do post back if the issue persists.
    Best regards,         
    Ashwin. S

  • U310 RAM Upgradable? Voided Warranty?

    Hi --
    I am a tentative Lenovo buyer and was am set on getting the U310 Ultrabook.  I do notice though that it only has 4 GB of RAM.  I would ideally like to upgrade this upon getting the laptop.  Is this possible?  I have researched it and cannot find any answers for this particular model.  I just do not want to buy the laptop and find out that it does not have an extra slot to upgrade the RAM so I am stuck with 4 gig.  If this is the case, then I may just spring the extra $100 or so and get the U410 Ultrabook.
    Secondly, will doing anything like this by myself void the warranty?  I certainly would not like that to happen.  
    Let me know and if anyone has any advice on the U series; I'm hoping to buy today before this sale is over.
    Thanks!

    I just upgraded and wanted to share some notes.  The quick answers are:
     - Yes, opening the case voids the warranty (and needs to be done carefully)
     - Yes, the machine can run 8GB of RAM
     - and (bonus) you can use the mSATA SSD drive as a regular SSD drive--and upgrade it as well
    The only potential hiccup is that you may need to flash BIOS version 65CN21WW for the RAM upgrade to work.  Initially my machine would not boot or POST with the 8GB stick.  After flashing this version things went smoothly (aside from needing to re-apply BIOS settings to get Windows 8 to boot again).
    Here's more details:
     - my machine is the non-touch screen i3 based system
     - I used the Crucial memory advisor to locate the 8GB stick of RAM and a 240GB mSATA SSD
     - There are useful YouTube videos showing how to remove the back panel.  Basically you pry off the rubber feet, unscrew the 4 screws you'll find, then (VERY) carefully work your way around the space between the back panel and the silver plastic
    For my dual-boot setup:
     - Fully shutdown Windows (being sure not to use Intel Rapid Start--you want it to be a complete shutdown)
     - In the BIOS disable IRST
     - Switch the drives to AHCI mode in the BIOS (you'll need to reload Windows after doing this)
    From there I installed Windows 8.1 to a 250GB partition on the 500GB spindle drive.  Ubuntu GNOME 13.10 went on the entire SSD, with the other 250GB of the spindle drive available for slower-speed storage.  With my increased storage I'll be considering if both OS's should reside on the SSD for performance, with extra storage on the larger drive.

  • RAM Upgrade for 17" MacBook Pro (2.4 GHz, Core 2 Duo)

    I am looking to upgrade and max out the RAM slots on my 17" MacBook Pro (2.4 GHz, Core 2 Duo). Will the CORSAIR 4 GB (2 x 2 GB) DDR 667 (PC2 5300)? The item I am looking at can be found here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2153340551%201328023 882%201327924738%201328123897&name=DDR2%20667%20%28PC2%205300%29.
    Thanks!

    Here's a better deal than NewEgg.
    http://dealmac.com/Corsair-4-GB-2-x2-GB-PC2-5300-Laptop-RAM-Kit-for-20-after-reb ate-6-s-h/262711.html

  • RAM upgrade on HP EliteBook 8730w

    Hi, I just bought two new hynix 4GB SODIMMs (4GB 2Rx8 PC2-6400S-666-12) and tried to install them into my laptop without luck. The computer starts with black screen and after a second or two the numlock and caps lock indicator LEDs starts to flash in blocks of three. The computer won't boot past this. From what I can gather 8GB RAM upgrade is possible and the mentioned RAM should be the correct one. Could either or both RAM sticks be faulty? Any help is greatly appreciated!

    Hi,
    Generally, it's best to upgrade memory with matching modules so a suitable upgrade can be seen on the following link.
    http://www.crucial.com/store/listparts.aspx?model=​Pavilion%20dv6-3225dx&Cat=RAM
    If your notebook already has 1 x 4Gb Module and you just wish to purchase an additional one, use an application such as CPU-Z to match the specifications to your existing memory ( check the Memory and Spd tabs ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Lenovo Idea Centre Q190 RAM Upgrade ?

    I have Lenovo Idea Centre Q190 = 57313947 = core i3 2365M 1.4 Ghz with 4 G RAM,  can i upgrade that memory  from 4GB (Current) to 8GB from corsair.com = http://www.corsair.com/us/vengeance-8gb-high-performance-laptop-memory-upgrade-kit-cmsx8gx3m1a1600c1...
    Thank you in advance.
    Solved!
    Go to Solution.

    hi wildhorse,
    Welcome to Lenovo Community Forums!
    This Upgrade is Fine
    Bios in this systems does not have any restriction on RAM Brand and Model
       The Speed and other properties matched to your desired RAM model.
    You should have no problem with this.
    This is the Maintenance manual of your unit.
       I hope you can find details on Physical RAM Replacement on this Manual.
    IdeaCentre Q190 Hardware Maintenance Manual (English) 
    ideacentre_q190_hmm_en_20121219.pdf
    3.05 MB.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Ram upgradation

    Hi,
    I wanted to upgrade the ram of my dv6 6155tx laptop from 4gb to 12gb by adding a 8gb Transcend JetRam DDR3 8 GB Laptop RAM (JM1600KSH-8G) in the second slot. So is it compatible with my laptop ?
    This question was solved.
    View Solution.

    Your laptop can take up to 16 gigs but uses DDR3-1333 not DDR3-1600. The memory you want to buy might downclock and run fine but there are no guaranties. Ideally you want to install 2 of the same modules or at least the same size and speed modules so that the memory runs as "dual channel" which is faster. Oddly, 12 gigs may actually be slower than 8 gigs in dual channel. 

  • Toshiba Satellite L750-1LM PSK6RE-01N00RG5 Ram Upgrade and Maximum Capacity help

    Hello, I have Toshiba Satellite L750-1LM PSK6RE-01N00RG5 I want to upgrade my ram. How much is the maximum capacity of ram ? Through a command in linux I found it is 16GB (8gb and 8gb)Is there any limitation in speed?In my ram slots says 1.5v if I buy 1.35v will be a problem? Is this ram compatible with my laptop?RAM CORSAIR CMSO8GX3M2A1333C9 SO-DIMM 8GB (2X4GB) PC3-10666 DUAL CHANNEL KIT Size: 8GB (2 x 4GB kit).
    Memory Type: DDR3 PC3-10600 204-pin SODIMM
    Bus Speed: 1333 MHz.
    Timings: 9-9-9-24.
    Power: 1.5 V.
    Additional features: Non ECC Memory. I know from Kingston Support that this ram is not compatible with my laptop        RAM KINGSTON KVR1333D3S9/8G 8GB SO-DIMM DDR3 PC3-10600 1333MHZ VALUE RAMand that I cannot buy any Kingston memory due to they stop supporting my laptop.

     
    Satellite L750-1LM (PSK6RE-01N00xxx)
    According to the spec above, there are two slots and you can have up to 8 GB of DDR3 RAM (1,066 MHz).
    Toshiba peddles this: 4GB DDR3 (1066MHz) PA3677U-1M4G
    See the section Additional Memory Module, which begins on p. 3-17 of the User's Manual (attached).

  • Compaq Presario C303NR Doesn't Completely Start-up after New RAM Upgrade

    Hello Paul,
    This is Tammy. I finally made time this morning to upgrade the ram in my laptop, model C303nr. And, I'm in desparate need of help because something went horribly wrong.
    The laptop boots up to my desktop, but then I get nothing but moving vertical lines, much like tv snow, but more structured. I've taken the new memory out a couple of times and tried to re-seated it, but I get the same results. Moreover, when I tried to put the old memory back in, the exact same thing happens. Have I completely broken my laptop?
    Can you or someone out there please help me. This is my first attempt to do something like this and I feel absolutely heartsick over the results.
    Clinging to hope for a fix,
    Tammy
    This question was solved.
    View Solution.

    Hi Paul,
    After the other tech responded by asking me to connect the laptop to an external monitor to check the video card, I decided to take another go at the ram first. Note: My only external monitor is packed knee-deep in a storage room and would have been a nightmare to unearth, so going toe-to-toe again with the ram seemed considerably less challenging at that point.
    I have a small hand-held vac that I use only for blowing dust off of figurines, so I pulled it out and blew the inside of the laptop out as best I could without taking the entire bottom cover off. Then I blew the old ram off for good measure. After I re-installed the old ram, the laptop booted and the screen about windows not shutting down properly came up. (Note: Because of my earlier problem with the ram, I had to do a hard shut-down.) Safe-mode was one of my options, so I chose it. After fully booting into safe-mode everything appeared okay... no vertical, moving, snowy lines. I shut the laptop down and then started it again in normal mode. (Note: Didn't use restart. Did it the long way.) The laptop booted fine again.
    Somewhat encouraged, I decided to take a chance on the new ram. So I blew it off for good measure too and installed one stick. Restarted and everything worked just fine. Shut it down and started it again. Everything still okay. Blew the second stick off,  installed it, and restarted the laptop... fully expecting something to go wrong here. Nothing did. Shut the laptop down and started it again. All surprisingly okay. I hadn't used this laptop since our previous modem/router went out, so I had to set-up wireless connection. All remained okay... and appears to still be okay. Currently running, though it is not the one I am typing this message with.
    In summary, the only thing I can figure out is that I inadvertently introduced dust into either the ram seat or onto the ram itself. Or, that in spite of the ram appearing well seated to a novice, it wasn't. (I had read someone else's thread that indicated this as being a possibility.)
    (Note: I went into such detail above in the event this thread might help someone else at a later date with his/her own ram upgrade problem.)
    A much relieved and grateful...
    Tammy

  • Powerbook G4 17" motherborard failure after RAM upgrade???

    Thank you in advance for any advice.
    I have an original, first generation PB G4 17" that I've used for 5 years. Recently, I had to replace the AC supply because the former one was bent when the laptop fell out of a chair. When I took it in to an authorized dealer here in Taiwan, to test the power adapter, I decided to upgrade the RAM from 1GB to 2 GB. Before I brought it home, it seemed to work at the store, although I thought I did not appreciate any performance boost when I opened multiple apps. Anyway, after I got home, I tried to turn it on, but it would not turn on. Thinking the battery was depleted, I hooked it up to the new AC adapter (Apple brand), and lo and behold it would not boot. I would shut it down by pressing the on/off button or just disconnect the power source (adapter and battery). It started to beep three times after multiple attempts. I took it back to the store, and got my original RAM reinstalled, and the same three beeps occured. I just got a call from the service center and was told that the motherboard has failed. Does any of this make sense? I have never had any trouble like this prior to the RAM upgrade. I just replaced the HD about 6 months ago. I'm just sick to my stomach...Any suggestions? Any input would be much appreciated.

    Welcome to the Apple discussions.
    We could discuss how you'd benefit from the additional memory, however, since the system isn't working, let's focus on the beeps.
    When you start the system, it goes through some tests (called the power on self test or POST) before loading the operating system. If it finds any errors, it beeps, and the beeps are:
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    3 beeps means it doesn't find any memory that passes the POST test. The fact that this started up after the service center installed the memory upgrade is suspicious, however, if it worked in the store then stopped working later, it may just be unfortunate timing.
    There are some company's on the internet that claim they can repair the logic boards, otherwise, Apple's solution is to replace them. In the US, some Apple stores offer a 'fix everything' service for $350, which is less than specifically replacing the logic board - perhaps there is a similar service in Taiwan.

Maybe you are looking for