Laptop's Fan Making noise when i use flash

I am passionate about playing games online, Not that i care about whether or not my computer gets cracked or not, but i am curious now, I want to know why fan of my laptop start making noises and run faster then usual whenever i play games for more than half an hour. I mostly like [various links removed by moderator] and many others.  I just want to know why it happens plus if it can be fixed that would be great.

I've never heard anything from my trackpad save 'clicks' - and I don't recall anyone else coming here with that problem, either.
Since it sounds (no pun intended) like a hardware problem, if I were you I would take advantage of your remaining warranty and take the machine to your local Apple Store or an AASP and have them take a look at it. Could be a swollen battery, a bad trackpad, whatever.
Good luck,
Clinton

Similar Messages

  • I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

    I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

    When my iBook got hot like that, I would take a break and let it cool down.
    You can buy laptop desks that have USB powered fans on them, such as the Targus Chill Mat.

  • My Macbook Air has been freezing now it will not turn on and is making noises when I try, Help?

    My Macbook Air has been freezing now it will not turn on and is making noises when I try, can anybody help I haven't a clue what to do?

    Try the troubleshooting steps mentioned here >  Troubleshooting: My computer won't turn on

  • When i use flash player my computer restarts ?

    when i use flash player my computer restarts ? i turn off Hardware Acceleration but now i can't play game in full screen. what is the problem and please told me the solution.

    What is your operating system & web browser?

  • Phone making noise when not in use

    Hi. I currently have one phone downstairs, and two upstairs. However, during different intervals throughout the day, the two phones upstairs will make a noise, even though no-one is using any of the phones. It is one beep, then followed by another beep about 5 seconds later. It is the same 'beep' that can be heard when someone IS using the phone downstairs, and then hangup the phone. What could be the cause of this noise?
    To make matters worse, whenever this noise occurs, it will invariably disconnect my broadband connection. How can two phones make a noise, when no-one is using any of the phones in the house? Thanks for any answers.

    - if you havve extension sockets then they should be wired to terminals 2 & 5 of the detachable bottom half - your last picture.  I think from your first picture that someone has wired the extension to tyhe same terminals A & B on the backplate of the master socket your first picture.  the incoming BT wires are normally blue/white and white/blue
    I have a socket upstairs, but that is connected like the following. It is actually the wire at the very bottom of the splitter, and not one of the ones that has a filter. One filter goes to the main phone, the other filter for the Sky. Is this classed as an extension socket?
    This is what it looks like upstairs (Ive added a filter, but its pretty much the same):
    - I can see whay DS and Imjolly are getting at with reference to the extension being wired to the back of the NTE itself but it may be the case that the engineer who has installed it has just used an internal 4 wire (which they also use for extensions) from the block terminal, that's the little white box in the second picture down to the NTE5a. If that is the case there is really nowt wrong with that at all.
    Do DS or Imjolly agree or disagree with this? When I put the master socket front back on, I get a reception on the phone, so it must work fine, even without any wires connected, right?
    -You really shouldn't and I can't suggest this, but may be have the rear of the main part looked at, by BT of course, and possibly provide an image of this too. there should only be 2 wires (1 pair) connected to terminals A&B on the rear of this main part.
    Looking at the picture of the master socket from earlier, to do this, would I only have to unscrew the screw that is most central (and not the left and right ones)?
    Firstly have you checked the batteries in your smoke alarm?
    Yup. Its definately the phones.
    Do the phones upstairs plug into telephone sockets or are they just slave handsets that connect to the main base station?
    I think the pictures in this post answer that. The blue and white wire coming out of the splitter are two phones.

  • Powernowd cpu making noise when start some application

    When I start some application my cpu is making noise. Is this because of powernowd.
    I recently started using powernowd. Below is the default settings.
    powernowd: PowerNow Daemon v1.00, (c) 2003-2008 John Clemens
    powernowd: Found 2 scalable units:  -- 1 'CPU' per scalable unit
    powernowd:   cpu0: 800Mhz - 2401Mhz (4 steps)
    powernowd:   cpu1: 800Mhz - 2401Mhz (4 steps)

    Are you sure your CPU makes the noise. I've never heard that CPU's make any noise. Isn't it rather the fan which makes the noise? That could very well be the case, since powernowd is intended to adjust cpu frequency scaling, i. e. reduce cpu threshold if it is not needed. If you then start an application, the cpu may be forced into a higher threshold, which produces heat, so that the fans have to kick in in order to reduce cpu temperature.

  • K8N Neo2 Platinum Chipset fan making noises

    Hey all,
    I just turned on my computer and noticed it was making funny noises.  In particular I believe it is the chipset fan making the noise.  I opened up the computer and got as much dust as possible but when I turn it back on continues to make those noises.  How do I solve this problem? 
    Thanks.
    Update: now the fan is barely even spinning.  :(

    Hi,
    You can use the excellent SpeedFan to monitor your PC and to quiet the northbrige fan. I use it an make that fan to run at 70%. It is enough for make it a lot less noise (for me ..). You can also drive your CPU Fan with it.
    But maybe it is another kind of noise you speak of ?

  • Rear fan making noise - is it fixable?

    Greetings, the lower rear fan of my Mac Pro is making noise - a faint grinding noise - as if the motor has sand inside. Since I bought my Mac Pro at an Apple Store, can the tech guys fix it? Or can I fix it? Or is it even worth fixing?

    The lower rear I believe is an exhaust fan to dump the heat inside.  It can be replaced.  Not sure how difficult that particular fan is.  You could add one of the temperature monitor utilities (iStat Pro, iStat Menus, Temperature Monitor, Hardware Monitor) and keep an eye on some of your temperatures if you can live with the sound.  It may get worse or may not.  No way of knowing if or when it would fail, or if it will fail at all.

  • Can't see any text members when I use flash 8.

    I'm using flash 8 and some of my users are having trouble
    seeing my site because they can't see any of the text!!! In some
    computers it works ok but some users can't see any text member even
    if they upgrade the flash player to 8 version. How do I correct
    this!
    I had had problems with this when I ran a swf directly, I
    couldn't see any text; but when I put the swf into a html file I
    can see the text members that the web page has. Why is this
    happening!!! This did'nt happend with version mx. How can I correct
    this problem!
    Please help!
    Thanks a lot!
    Brenda Sanchez.

    just because people say they have flash 8 doesn't mean they
    actually have flash 8 have any of them navigated to a flash player
    detection site and confirmed they have flash 8? have any of them
    right clicked on an embedded swf and confirmed they have flash
    8?

  • Laptop making noises when opening up...

    My new MacBook is making "creeking" like sounds when I open or move the screen. Is this normal? Is there any way to make the sound go away? It just started doing this...does it just need some more use to help "break it in"?
    Also, I have the black MacBook...which I love, but sometimes my hands tend to get alittle sweaty and this really shows up on the black...any suggustions? It only happens when I'm in front of a big group of people, but I worry that they can see the marks left on the laptop...
    Thanks for your help!

    My white MacBook just started doing this too.
    It's in the shop for RDS + the discoloration issue. I'm curious if anything they replace for the discoloration of the case will make the creek go away. If my MacBook wasn't already going back to the shop for the RSD issue, I would have lived w/ the creek sound.
    I've had good luck with removing sweaty fingerprints from my BlackBerry with this little microfiber cloth that came w/ the BlackBerry. I've seen them at camera stores for a few bucks. They've always worked a lot better for me than anything cottony. <shrug>

  • HP 15-d041TU DVD-ROM HP UJ8FBA makes a noise when not using

    Hi everyone, here comes another problem from my newly bought HP, i sorted out nearly every issue that came along (packed) with this driver less laptop, now i have a issue that dvd rom makes a noise as if pick up is moving every once in 5 minutes, there is no disc in the drive, and i am not using it at all. I opened it and closed it doesn't seem to help. So after numerous searches i did this!
    1. ) Disabled Autorun of Windows 8
    2. ) Did a hard reset, i don't know if it's correct. "Hold the power button for 15 seconds" when computer is swtiched off
    3. ) Updated the bios again, it was updated i think but i did update again i don't know no messages about same bios etc.
    Now so far problem didn't arise, PHEW!
    What could have caused this? has anyone had the same problem? What was the solution worked for you?

    Here's the solution, it's not the drive that makes the sound. it is the hard drive, lol hardrive is located in the right bottom of the machine which i thought it's in the left. Even when i have the drive ejected it still makes the noise so it can't be the drive right?.

  • Remedy fan making noise on Late 2012 27" iMac?

    My iMac started making a noticble noise coming from the internal fan about 2 weeks ago and when I'm working/writing it drives me nuts.  I tried blowing into the back vents with a dust remover compressed air can to no avail.  Anyone have any luck making a fan silent again?

    NEVER EVER blow dust into a computer that makes an issue worse!!!!!!! If you suspect dust then remove the RAM cover and vacuum out the air intake.
    Reset the SMC and PRAM each 3x back to back. If you don't know how please follow the instructions in:
    https://discussions.apple.com/docs/DOC-3603

  • My iphone 4 is not wanting to light up at all ,making noise when getting calls etc. what could be the problem?

    I was trying to figure out why there was a cricle with a lock image in it on the top of my phone , so i was going through settings and couldnt find anything that was out of ordinary .so then i was trying to make room for a software update.The only thing i changed was was putting the little on screen help button. Then phone frozen after i was going through settings again to figure out the cricle and lock image on my home page. Then after a cetain amount of time, When screen time went out it wouldnt let me turn back on screen. But it will make noises from calls and texts and ect still when they come in. But it will not light up when calls or texts come through or notifications. It wont light up when i try to unlock it and or change the volume settings. My screen is blank and black but is still making sounds as if it was still on and working with no picture. Front camera still takes pictures when you hold down top and middle buttons but still not image on screen. Is there any suggestions that i can do myself or do you think i need to take it in myself to have it fixed?
    Thank you so much,
    Grace Wilson
    <Email Edited by Host> .

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Printer making noise when printing

    I have an HP Officejet Pro 8500 Wireless A909g all in one printer. Running on Windows 7 64-bit
    I have started to notice a noise being made by my printer when the print head is moving. Either while printing or when the printhead is being cleaned. It sounds like picking at guitar strings.   When I check the status of my printer, it shows that everything is ok. I ran the HP diagnostic tool and it also showed that everything is working fine.  I checked the printhead health, and it showed that one was exellent and one was ok.
    I have not been able to find any similar issues on the support forum or the HP site.

    How long have you been using the printer? the printhead may be wearing out... as long as it still prints , its ok. YOu may need to replace the printhead in the future.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Optical drive making noise when waking from sleep

    Hello everyone.
    I recieved my MacBook about three weeks ago, and haven't had any problems with it. Hope I never will have.
    One thing that bothers me, however, is that when it wakes from sleep, the DVD-drive makes a noise - as if trying to read a disc that isn't there. The drive is empty.
    This is beginning to get annoying, as I often use my Macbook in small classrooms, where being quiet is a virtue.
    You have any idea what I can do to stop this madness? Hopefully it can be solved via. software, but what say you?
    Macbook 13" White   Mac OS X (10.4.8)   1 GB

    It's normal. I believe the reason why it happens is that most drives, by default, when they have power applied to them, they start scanning to see if a disk is inserted. By this time (machine turns on), the OS or the drivers are not loaded to tell the unit NOT to scan, therefore it happens. Now if the OS or the drivers are loaded they could probably prevent it from doing that. Obviously that's only when the OS is already running and thus the machine is already on.
    Luckily it's only once, but these kinds of issues have a long history to them... For example, back in the Amiga days, the machine would do automatic detection of floppy disks, and the way it did it was by moving the heads to a negative track, which would cause a click every second or so. Extremely smart of the engineers, because the drive wasn't supposed to support such functionality. At the same time it was extremely annoying to have the click happen! Finally some guys wrote some software to fix that, before too many people went insane from the clicking
    Luckily our superdrives don't do something like that every second

Maybe you are looking for

  • I am trying to use 2 MOTU 896's as an aggregate device in Logic Pro 8

    I am using Logic Pro 8 on a Macbook Pro OS 10.6.8.  I am trying to use 2 MOTU 896's as an aggregate device to have total of 16 inputs.  I am daisy chaining the 896's via firewire.  I can select channels 1-16 as inputs in Logic.  I am getting signal i

  • Need help in writing the script in windows to read the file at runtime

    Hi All, I need a help with a Script. I need to read a filename from a directorty based on a specific format. I will be looking for the file in a directory that will have a file added to it each month. The script will need to go out to that directory

  • ChaRM transport route, one development, 2 QA, 2 PRD system landscape

    Hello, We have a customer who has an ERP system with a transport route which is the following: One single Development system which feeds, 2 QA systems and then 2 PRD systems. We are to implement ChaRM and we want to customize the tickets so that ever

  • Calling web service in CE 7.2

    Hi Experts I have to call a webservice in my process. Please provide me documents/blogs on how to call/use web service in process. Regards Jabbs

  • Can't load video

    I rented a movie from the iTunes Store, and get about 2 minutes into watching it when it stops and a "Cant load video" message appears. I've tried everything: signed in and out of my account, restarted the iPad, closed apps, and my operating system i