Laptop's getting blocked when re-docking

Hello we have a mixture of windows 7 and windows xp laptops that are typically docked during the day. We are having an issue that when someone undocks there laptop to switch over to wireless (which has not been rolled to ISE yet) when they come back to there desk and re-dock they get blocked by ISE. We are using EAP-TLS for our windows machines to authenticate. The solution we have found that has been working is to disable/enable the NIC. Has anyone else seen this issue before?

Storm we we resolved by installing Cisco's anyconnect client with the Network Access Control. From there we built a couple of profiles for the wired and wireless networks. Hope this helps.

Similar Messages

  • Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram, Lately Photoshop CC 2014 in my PC gets blocked when doing

    Últimamente Photoshop CC 2014 se  detiene fusionando las capas al hacer panoramas. Primero  edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
    Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
    Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
    Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

    Últimamente Photoshop CC 2014 se  detiene fusionando las capas al hacer panoramas. Primero  edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
    Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
    Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
    Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

  • Keep getting blocked when downloading

    I keep getting blocked when trying to download.  McAffe tested their product with my system and told me to contact Adobe.  Any suggestions?

    Assuming you are talking about downloading Adobe Reader, I would suggest to try going here
    ftp://ftp.adobe.com/pub/adobe/reader/
    proceed to the version that best suits you, and download and install it.

  • My iphone get blocked when I recieve phone calls

    when I recieve phone calls my phone get blocked it shows somebody is calling  me in black color but when  I want to return to the main screen it get blocked and I have to turn off to use it

    What leads you to believe that you are entitled to an upgrade because of a hardware issue?
    Warranty only entitles you to the same model/capacity device as replacement.
    If you are out of warranty, you pay out of warranty replacement cost which is $199 (regardless of model/capacity).
    If you are eligible for full-discount upgrade, that would be the better route to go.
    If you are not eligible for full-discount upgrade, the most economical solution is warranty or out of warranty replacement.

  • IPod touch gets hot when in dock without charger

    My iPod touch gets hot after a while when I put it into a MT-035 universal dock without a charger. I use this to connect to my stereo.
    My iPhone stays cool in the same situation.

    Yes, it is normal for the iPod toi get quite warm with heavy use like gaming and videos.

  • Port blocked when Tomcat is made a windows service

    Hi All
    I have a web application which listens on some port for server response .That port gets blocked when Tomcat is made a windows service.But if i run tomcat normally this problem does not occure.So i am not getting what is exact problem?

    Huh?
    As a guess you mean that you when you run Tomcat the server port doesn't work.
    The difference is because in one case you are running as one user and in the other you are running as a different user. On windows you are probably running 'without' a user because you didn't explicitly set one up.
    The solution is to use an explicit user. That is also the way you should test. Log in as that user and run tomcat from the command line as that user.

  • Firefox have some promlems and it block when is opeining hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

    Firefox have some problems and it block when is opening hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

    I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

  • How to get sound when my laptop is hooked to my tv w/hdmi cable?

    how to get sound when my laptop is hooked to my tv w/hdmi cable?  it's a hd tv and my mac's os 10.6.8
    tried using an external speaker both w/the computer and then the tv, but neither worked......
    Message was edited by: bevmex

    Hi,
    Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
    Next, connect your notebook via HDMI to your Tv.  Right click the speaker icon in the Taskbar and select Playback Devices.  Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Output fax not getting triggered when sales order credit block is released

    Hi Experts,
    I am working on an issue.
    I have one sales Order which has credit block.
    when we release the credit block via vkm3, then the output fax gets triggered.
    I have another sales order which has credit block,
    when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
    If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
    Any advice on this please.
    Regs,
    SuryaD.
    Edited by: SuryaD on Oct 21, 2010 9:34 PM

    Hi Brad,
    Thanks for your response.
    Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
    Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
    I went to Go to -Determine analysis for both orders 1 and order 2.
    in both the analysis i am able to see the output ZFAX.
    *Analysis Output*
    *Order 1                                                                    Order 2*
    1. ZFAX                                                                   1.   ZFAX
        10(Z010)                                                                 10(Z010)
           0000122426                                                              0000122427
    2.  ZFAX                                                                   2.   ZFAX
    When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
    There in just 2 differences as below.
    In the above screen,
    1.Order 1 ==> has some value 0000122426
    2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
    Diagnosis
    Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
    In the above screen
    1.Order 2 ==> has some value 0000122427
    2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
    No more information is available.
    Please guide as to how to initiate the debug for output processing ?
    Which screen where to switch on debugger.
    where to look further?
    Regards,
    SuryaD.
    Edited by: SuryaD on Oct 22, 2010 11:41 AM

  • When I connect my iphone4s to itunes on  my laptop I get this error...itunes was unable to load data class info from sync serv

    When I connect my iphone4s to itunes on  my laptop I get this error...itunes was unable to load data class info from sync serv

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

    I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good.  Once I disconnect the Express, everything is good again.
    I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension.  Most of the time I get an error trying to update the Express.  But when it seems to be set up perfect, the entire house can't get to the internet.  Just when it looks right, it is so wrong.
    If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it.  I'm left to the conclusion that the Express is faulty.  I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

    I finally got it working.  I was trying to set it up ethernet.  My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode.  So everything I initially tried always resulted in 'wireless'.  Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it.  So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
    So here's the weird part.  When I finally tried 'continue' (vice manual), I would get 4 options.  One would be 'ethernet' extended.  So I would select it, it gave me green lights, all looked good, and still the same problem.  This is when I got frustrated.  I thought I had exhausted all possible combinations.
    But somehow when trying continue again after another restore, I only got 3 options.  One was the same ethernet extended option (can't remember what the missing 4th one was).  And this time it worked - it gave me the big green circle with the checkmark saying it was successful.  I don't know what I did different, but I know now that it won't work if 4 options come up to choose from.  It will work if only 3 options come up.  And success if only verified by the big checkmark.  Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
    As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it.  Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with.  It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
    Thanks for the response.  I really do appreciate it.
    Aiport Extreme Gen5 - internet access and router
    Airport Express Gen2 - connected via ethernet, extending my wireless
    - configured while connect directly to the Extreme, but now on a switch (16-port hub)
    Using Airport 5.6.1
    1) Restore Defaults from Base Station menu
    2) Following restart, Select Continue
    3) Of the 3 option presented, select 'ethernet.... extend network...'
      - if 4 options are present, may not work
    4) Wait for the green circle with the big white checkmark.
    5) Connected Express to the switch where a cable went to other end of house - works.
    Dead-zone went from 2mbps to 24mbps.
    I probably spent 4 hours chasing my tail in anger.  The correct way took about 5 minutes total.
    Thanks again.

  • My ipod is not working at all when i plug it into my laptop i get an itunes sign and below that plugin sign

    My ipod is not working at all when i plug it into my laptop i get an itunes sign and below that plugin sign also it says new software found however it first asks me to install the software disc which i dont have it with me now can you plz check for the same and reply asap...please thanks.

    The link I and Ingo provided included:
    1. Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    That is more than quicktime and iTunes.  Follow all the instruction in the link for removing and reinstalling the Apple software.

  • On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found.  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found.  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
    I have to clear this everytime I boot up?

    With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

  • When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

    When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

    Hi dones49,
    It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
    To find the file, use the information in this article to navigate through the iTunes media folders -
    Locate and organize your iTunes files
    If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
    Download past purchases
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • When I attach a JPG file in my email and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it." Anyone know why and how to fix this problem?

    When I attach a JPG file in my email message and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it so that they can save it." Anyone know why and how to fix this problem?

    Your Windows friend should ask in a Windows forum why his email client won't open attached jpg files. We have no idea what email client he is using or how his Windows security is configured.

Maybe you are looking for