Laptop screen isn't turning on

Screen isn't turning on just black hooked up to put s source and out transmitted on external monitor.

Hi Heisenburg,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with not booting.
As you have mentioned the system was overheating and have replaced the fan, but still the you are not able to get any display.
As you have also mentioned that the LED indications are glowing but no display on screen, please check are you able to hear the windows start up tone. If yes also please connect the external monitor and check for the display.
If the display appears on the external monitor then there is a issue with the LCD and must be replaced.
Hope this helps! Do post us back for further queries.
Best regards,                                          ​    
Ashwin.S                            
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Random laptop screen Black out / Turn off .

     Hi, 
     first of all my laptop is : HP Pavilion dv6-6160se Entertainment Notebook
    to the problem now
    A few days ago my laptops screen started  out of a sudden shutting down/turning black( no lights at all ). This was happening while using the laptop at random. The screen  had no lights, and if i use a flashlight on it there is nothing. like its turned off completelly.
    Before this happens. Ths behavior varies. Sometimes it flickers from my desktop to a black screen then back on and some times not. Most of the times screen changed to a radom color (green mostly) then becomes black/shuts down.
     NOTE: The laptop keeps runing, i can hear the videos playing so it probably isnt a gpu chip or gpu issue , music and games.
    I searched the web for all kind of reasons that this could happen and tried some of the fixes .
    Here are everything i tried and all or the details i could accumulate in past coupe of days:
    1. If the screen flickers , blacks out and then turns back on i get a message that gpu drivers have stopped working and recovered (  on both amd and intel ).
    2. If the screen blacks out, on rare ocasions if you close the laptop lid and let the laptop go to sleep , when waking up screen works again ( noticable due to screen moving)
    3. I tried installing 4 different drivers all with clear install. ( didn't work)
    4. I tried to  to recover system with restore point. ( didn't work)
    5. I tried to lower the screen brightness. ( didn't work)
    6. tried this trick: 
    Turn off laptop
    Remove battery
    Hold the power buttong for 30-45 seconds
    Plug-in the charger ( dont put the battery in )
    Turn on laptop and see if it works.
    Very Noticable details:
    7.  Since  on of the rare fixes requires to move the lid  i tried shaking the screen a bit or pushing it slightly to different directions. This actually  does the trick and turns the screen back on ( i am right now typing  this after using this "trick"
    So, with this one as a hint there are a couple of stuff i have in mind but i am not sure  and need help since i am not a technician.
    a) There is a loose LCD cable and when i type a little vibration moves it and ends up in a black screen.
    b) I read that if you use a flashlight and you cant see  your desktop it means its a bad inverter.
    c) Can the inverter have a lose cabe instead of the lcd ?
    That's all the feedback i could give you that i can recall now.
    Currecntly the screen looks ok ( maybe its the certain angle it has after i moved it  so i would aprecciate a fast reply before  it goes black again
    EDIT: Tried to play a game for a few mins and i got the black screen again. Closed the lid  so the laptop goes in sleep mode then opened it and it worked. Just for the records.
    EDIT#2: Just tried to play a game again. got the blackscreen, shaked the screen a bit and it worked but for the 1st time i get the message " Application has been blocked from accessing graphics hardware" , Can it be that its the GPU after all or maybe drivers? 
    EDIT#3: Tried to play a game again and it seem to trigger the issue . ( i am currently running the laptop with only the intel drivers installed)
    thanks in advance
    Sincerely,
    Ntas
    P.S. Please feel free to ask me any question if you need more information, i am not a laptop expert but i know   more than the average person
    This question was solved.
    View Solution.

    Hi @Ntas 
    I have read through your post and it seems there are a couple of possibilities, and I noted that you have already tried several of the things I would normally suggest.
    I will however post some of those links anyway for you to review, it is always possible there may be something in one of them that may have been missed or may inspire an idea of the cause. Since you mentioned that sometimes just moving the screen will cause the problem or make it disappear, that does seem like either a loose connection or maybe something like pressure on a part of the display causing the issue.  Of course that last part may just mean the display is on its last legs, but hopefully not.
    First I will give you a link to the service manual, to help you check the connections. Just be careful to read the sections on precautions, to protect yourself and to prevent any other damage.This manual is also useful in that it lists all the compatible parts, so if the display is defective you could use this guide to help order a compatible replacement if you choose to do so. HP Pavilion dv6 Notebook PC - Maintenance and Service Guide
    Here are some other sources, that may be helpful to you.
    Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
    Diagnosing a Liquid Crystal Display (LCD) for Damage
    Also for your convenience here is the drivers page for your notebook.
    HP Pavilion dv6-6160se Entertainment Notebook PC Drivers
    I hope this all helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • My Laptop Screen won't turn on upon start up

    I have an HP Pavillion DV4 laptop and whenever I turn it on the screen never turns on. So I tried to hold the power button down to completely shut it off. Then I waited about 30 seconds then I turned it on again and the screen still would not turn on. What is the problem here because this is driving me CRAZY. If anyone knows the problem, it would be greatly appriciated.

    bulldog43 wrote:
    hi there, I got HP Notebook, I just left my notebook about half an hour and come back, the screen didnt come on, I tried taking battery out and in, pressing the power button, and when I turned it on lights came on and asked me whether windows to start on normal or safe mode, and chose normal then windows wouldn't start, it is all black screen and I can hear windows loading, but black screen, then I tried to put it on safe mode, and windows started on safe mode , but soon as I turned it to normal windows, wouldn't start, so Please let me what should I do, anything I can do, or I should take it to pc repair centers. Hello bulldog43.  
    So, you're able to boot into Windows when using Safe Mode but not normal mode?  To me this implies that the issue is software related.  The most likely cause is the video card driver.  To begin I would suggest trying to reinstall your video card's driver in Safe Mode.  
    I will be happy to locate this software for you and type out some instructions.  I will need your product number for this.  Take a look at this document to see where to locate your product number.
    I will keep an eye out for your reply.  I hope you have a great day!

  • Laptop screen does not turn on after resume from suspend/hibernate

    I use systemctl suspend/hibernate to resume,  but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
    00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
    00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
    00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
    00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
    00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
    00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
    00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
    00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
    00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
    00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
    00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
    00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
    00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
    00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
    00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
    00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
    00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
    00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
    04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] tseg: 009ff00000
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF00000000 write-back
    [ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
    [ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
    [ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000023f000000 aka 9200M
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
    [ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
    [ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
    [ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
    [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
    [ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
    [ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
    [ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
    [ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
    [ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
    [ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
    [ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
    [ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
    [ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
    [ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
    [ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
    [ 0.000000] node 0: [mem 0x100001000-0x23effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
    [ 0.000000] On node 0 totalpages: 1960479
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10155 pages used for memmap
    [ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20416 pages used for memmap
    [ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
    [ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1397.380 MHz processor
    [ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
    [ 0.000046] pid_max: default: 32768 minimum: 301
    [ 0.000053] ACPI: Core revision 20141107
    [ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
    [ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
    [ 0.015021] ACPI: All ACPI Tables successfully acquired
    [ 0.016280] Security Framework initialized
    [ 0.016286] Yama: becoming mindful.
    [ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.020472] Initializing cgroup subsys memory
    [ 0.020479] Initializing cgroup subsys devices
    [ 0.020482] Initializing cgroup subsys freezer
    [ 0.020484] Initializing cgroup subsys net_cls
    [ 0.020487] Initializing cgroup subsys blkio
    [ 0.020510] CPU: Physical Processor ID: 0
    [ 0.020511] CPU: Processor Core ID: 0
    [ 0.020513] mce: CPU supports 6 MCE banks
    [ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
    [ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.021880] ftrace: allocating 21166 entries in 83 pages
    [ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
    [ 0.174081] Performance Events: AMD PMU driver.
    [ 0.174086] ... version: 0
    [ 0.174087] ... bit width: 48
    [ 0.174088] ... generic registers: 4
    [ 0.174089] ... value mask: 0000ffffffffffff
    [ 0.174090] ... max period: 00007fffffffffff
    [ 0.174091] ... fixed-purpose events: 0
    [ 0.174092] ... event mask: 000000000000000f
    [ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.197738] x86: Booting SMP configuration:
    [ 0.197744] .... node #0, CPUs: #1 #2 #3
    [ 0.250891] x86: Booted up 1 node, 4 CPUs
    [ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
    [ 0.252264] devtmpfs: initialized
    [ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
    [ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
    [ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
    [ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
    [ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
    [ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
    [ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
    [ 0.258125] pinctrl core: initialized pinctrl subsystem
    [ 0.258173] RTC time: 18:50:52, date: 02/22/15
    [ 0.258343] NET: Registered protocol family 16
    [ 0.270952] cpuidle: using governor ladder
    [ 0.284279] cpuidle: using governor menu
    [ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.284493] ACPI: bus type PCI registered
    [ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.285035] PCI: Using configuration type 1 for base access
    [ 0.299021] ACPI: Added _OSI(Module Device)
    [ 0.299025] ACPI: Added _OSI(Processor Device)
    [ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.831121] ACPI: Interpreter enabled
    [ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
    [ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.831167] ACPI: (supports S0 S3 S4 S5)
    [ 0.831169] ACPI: Using IOAPIC for interrupt routing
    [ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.843782] PCI host bridge to bus 0000:00
    [ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
    [ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
    [ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
    [ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.844070] pci 0000:00:01.0: supports D1 D2
    [ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
    [ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.844272] pci 0000:00:01.1: supports D1 D2
    [ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
    [ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
    [ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
    [ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
    [ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
    [ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
    [ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
    [ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
    [ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
    [ 0.845242] pci 0000:00:12.2: supports D1 D2
    [ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
    [ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
    [ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
    [ 0.845727] pci 0000:00:13.2: supports D1 D2
    [ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
    [ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
    [ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
    [ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
    [ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
    [ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
    [ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
    [ 0.846982] pci 0000:00:15.0: supports D1 D2
    [ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
    [ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
    [ 0.847225] pci 0000:00:15.1: supports D1 D2
    [ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
    [ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
    [ 0.847466] pci 0000:00:15.2: supports D1 D2
    [ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
    [ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
    [ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
    [ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
    [ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
    [ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
    [ 0.847956] pci 0000:00:16.2: supports D1 D2
    [ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
    [ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
    [ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
    [ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
    [ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.849834] pci 0000:04:00.0: supports D1 D2
    [ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.854860] pci 0000:05:00.0: supports D1 D2
    [ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
    [ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
    [ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
    [ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
    [ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
    [ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
    [ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
    [ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
    [ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
    [ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
    [ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
    [ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
    [ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
    [ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
    [ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
    [ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
    [ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
    [ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
    [ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
    [ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
    [ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
    [ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
    [ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
    [ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
    [ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
    [ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
    [ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
    [ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
    [ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
    [ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
    [ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
    [ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
    [ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
    [ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
    [ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
    [ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.864464] vgaarb: loaded
    [ 0.864466] vgaarb: bridge control possible 0000:00:01.0
    [ 0.864788] PCI: Using ACPI for IRQ routing
    [ 0.874741] PCI: pci_cache_line_size set to 64 bytes
    [ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
    [ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
    [ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
    [ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
    [ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
    [ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
    [ 0.875079] NetLabel: Initializing
    [ 0.875081] NetLabel: domain hash size = 128
    [ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.875101] NetLabel: unlabeled traffic allowed by default
    [ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.877246] Switched to clocksource hpet
    [ 0.884868] pnp: PnP ACPI init
    [ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.886021] system 00:01: [io 0x040b] has been reserved
    [ 0.886025] system 00:01: [io 0x04d6] has been reserved
    [ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.886032] system 00:01: [io 0x0c14] has been reserved
    [ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.886039] system 00:01: [io 0x0c52] has been reserved
    [ 0.886042] system 00:01: [io 0x0c6c] has been reserved
    [ 0.886046] system 00:01: [io 0x0c6f] has been reserved
    [ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
    [ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
    [ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
    [ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
    [ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
    [ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.887277] pnp: PnP ACPI: found 9 devices
    [ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
    [ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
    [ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
    [ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
    [ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
    [ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
    [ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
    [ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
    [ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
    [ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
    [ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
    [ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
    [ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.896259] NET: Registered protocol family 2
    [ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.897360] TCP: reno registered
    [ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.897618] NET: Registered protocol family 1
    [ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
    [ 1.838171] PCI: CLS 64 bytes, default 64
    [ 1.838242] Unpacking initramfs...
    [ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
    [ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
    [ 1.934495] microcode: CPU0: patch_level=0x03000014
    [ 1.934537] microcode: CPU1: patch_level=0x03000014
    [ 1.934580] microcode: CPU2: patch_level=0x03000014
    [ 1.934625] microcode: CPU3: patch_level=0x03000014
    [ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.934766] LVT offset 0 assigned for vector 0x400
    [ 1.934817] perf: AMD IBS detected (0x000000ff)
    [ 1.934854] Scanning for low memory corruption every 60 seconds
    [ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.935315] Initialise system trusted keyring
    [ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.937285] zpool: loaded
    [ 1.937288] zbud: loaded
    [ 1.937658] VFS: Disk quotas dquot_6.5.2
    [ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.937948] Key type big_key registered
    [ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.938508] io scheduler noop registered
    [ 1.938511] io scheduler deadline registered
    [ 1.938546] io scheduler cfq registered (default)
    [ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
    [ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
    [ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
    [ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
    [ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
    [ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
    [ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
    [ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
    [ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
    [ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
    [ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
    [ 1.939552] vesafb: scrolling: redraw
    [ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
    [ 1.955978] Console: switching to colour frame buffer device 144x54
    [ 1.972261] fb0: VESA VGA frame buffer device
    [ 1.972328] GHES: HEST is not enabled!
    [ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.973720] Linux agpgart interface v0.103
    [ 1.973797] rtc_cmos 00:02: RTC can wake from S4
    [ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.974434] TCP: cubic registered
    [ 1.974593] NET: Registered protocol family 10
    [ 1.975020] NET: Registered protocol family 17
    [ 1.975476] Loading compiled-in X.509 certificates
    [ 1.975502] registered taskstats version 1
    [ 1.976231] Magic number: 3:326:848
    [ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
    [ 1.976444] PM: Hibernation image not present or could not be loaded.
    [ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 1.977027] Write protecting the kernel read-only data: 8192k
    [ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 1.979659] random: systemd urandom read with 1 bits of entropy available
    [ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.980576] systemd[1]: Detected architecture 'x86-64'.
    [ 1.980581] systemd[1]: Running in initial RAM disk.
    [ 1.980590] systemd[1]: Running with unpopulated /etc.
    [ 1.980603] systemd[1]: No hostname configured.
    [ 1.980609] systemd[1]: Set hostname to <localhost>.
    [ 1.980655] systemd[1]: Initializing machine ID from random generator.
    [ 1.996373] systemd[1]: Populated /etc with preset unit settings.
    [ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
    [ 2.003390] systemd[1]: Created slice -.slice.
    [ 2.003412] systemd[1]: Starting -.slice.
    [ 2.005054] systemd[1]: Listening on Journal Audit Socket.
    [ 2.005188] systemd[1]: Created slice system.slice.
    [ 2.005200] systemd[1]: Starting system.slice.
    [ 2.005218] systemd[1]: Reached target Swap.
    [ 2.005226] systemd[1]: Starting Swap.
    [ 2.005288] systemd[1]: Listening on udev Control Socket.
    [ 2.005296] systemd[1]: Starting udev Control Socket.
    [ 2.005312] systemd[1]: Reached target Slices.
    [ 2.005320] systemd[1]: Starting Slices.
    [ 2.005335] systemd[1]: Reached target Local File Systems.
    [ 2.005342] systemd[1]: Starting Local File Systems.
    [ 2.005358] systemd[1]: Reached target Timers.
    [ 2.005366] systemd[1]: Starting Timers.
    [ 2.005398] systemd[1]: Listening on udev Kernel Socket.
    [ 2.005409] systemd[1]: Starting udev Kernel Socket.
    [ 2.005430] systemd[1]: Reached target Paths.
    [ 2.005441] systemd[1]: Starting Paths.
    [ 2.005497] systemd[1]: Listening on Journal Socket.
    [ 2.005510] systemd[1]: Starting Journal Socket.
    [ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
    [ 2.007428] systemd[1]: Starting Journal Service...
    [ 2.007472] systemd[1]: Reached target Sockets.
    [ 2.007494] systemd[1]: Starting Sockets.
    [ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
    [ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.021212] systemd[1]: Started udev Kernel Device Manager.
    [ 2.024169] systemd[1]: Started udev Coldplug all Devices.
    [ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.041719] SCSI subsystem initialized
    [ 2.042505] ACPI: bus type USB registered
    [ 2.042538] usbcore: registered new interface driver usbfs
    [ 2.042552] usbcore: registered new interface driver hub
    [ 2.042588] usbcore: registered new device driver usb
    [ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.045154] systemd[1]: Started Journal Service.
    [ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.045840] ohci-pci: OHCI PCI platform driver
    [ 2.045993] QUIRK: Enable AMD PLL fix
    [ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
    [ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
    [ 2.046697] ehci-pci: EHCI PCI platform driver
    [ 2.047833] libata version 3.00 loaded.
    [ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 2.102273] hub 1-0:1.0: USB hub found
    [ 2.102287] hub 1-0:1.0: 5 ports detected
    [ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
    [ 2.159071] hub 2-0:1.0: USB hub found
    [ 2.159085] hub 2-0:1.0: 5 ports detected
    [ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
    [ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
    [ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
    [ 2.215699] hub 3-0:1.0: USB hub found
    [ 2.215713] hub 3-0:1.0: 4 ports detected
    [ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
    [ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.271523] ehci-pci 0000:00:12.2: debug port 1
    [ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
    [ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 2.281694] hub 4-0:1.0: USB hub found
    [ 2.281705] hub 4-0:1.0: 5 ports detected
    [ 2.338086] hub 1-0:1.0: USB hub found
    [ 2.338100] hub 1-0:1.0: 5 ports detected
    [ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
    [ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.338596] ehci-pci 0000:00:13.2: debug port 1
    [ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
    [ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.348396] hub 5-0:1.0: USB hub found
    [ 2.348414] hub 5-0:1.0: 5 ports detected
    [ 2.404806] hub 2-0:1.0: USB hub found
    [ 2.404820] hub 2-0:1.0: 5 ports detected
    [ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
    [ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
    [ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.461571] ehci-pci 0000:00:16.2: debug port 1
    [ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
    [ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.471768] hub 6-0:1.0: USB hub found
    [ 2.471780] hub 6-0:1.0: 4 ports detected
    [ 2.528139] hub 3-0:1.0: USB hub found
    [ 2.528154] hub 3-0:1.0: 4 ports detected
    [ 2.528415] ahci 0000:00:11.0: version 3.0
    [ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
    [ 2.529180] scsi host0: ahci
    [ 2.529664] scsi host1: ahci
    [ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
    [ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
    [ 2.530551] scsi host2: pata_atiixp
    [ 2.530815] scsi host3: pata_atiixp
    [ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
    [ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
    [ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
    [ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
    [ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
    [ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
    [ 3.017307] ata1.00: configured for UDMA/133
    [ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
    [ 3.019278] ata2.00: configured for UDMA/100
    [ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
    [ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.084075] sda: sda1 sda2 sda3
    [ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 3.528901] XFS (sda1): Mounting V4 Filesystem
    [ 3.710527] XFS (sda1): Ending clean mount
    [ 3.935255] Switched to clocksource tsc
    [ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
    [ 4.799287] random: nonblocking pool is initialized
    [ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
    [ 7.417234] ACPI: acpi_idle registered with cpuidle
    [ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 7.544509] wmi: Mapper loaded
    [ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 7.626522] acpi device:2b: registered as cooling_device4
    [ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
    [ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
    [ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
    [ 7.746486] ACPI: Lid Switch [LID]
    [ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 7.746725] ACPI: Power Button [SLPB]
    [ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 7.746880] ACPI: Power Button [PWRF]
    [ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.749951] ACPI: AC Adapter [AC0] (on-line)
    [ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 8.061752] [drm] Initialized drm 1.1.0 20060810
    [ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
    [ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
    [ 8.363138] kvm: Nested Virtualization enabled
    [ 8.363151] kvm: Nested Paging enabled
    [ 8.704039] [drm] radeon kernel modesetting enabled.
    [ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
    [ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 8.832364] AMD IOMMUv2 functionality not available on this system
    [ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
    [ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
    [ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
    [ 9.031523] media: Linux media interface: v0.10
    [ 9.102014] CRAT table not found
    [ 9.102024] Finished initializing topology ret=0
    [ 9.102177] kfd kfd: Initialized module
    [ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
    [ 9.102951] fb: switching to radeondrmfb from VESA VGA
    [ 9.103002] Console: switching to colour dummy device 80x25
    [ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
    [ 9.104059] [drm] register mmio base: 0xFEB00000
    [ 9.104063] [drm] register mmio size: 262144
    [ 9.104144] ATOM BIOS: Toshiba
    [ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 9.104235] [drm] RAM width 32bits DDR
    [ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
    [ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 9.104394] [TTM] Initializing pool allocator
    [ 9.104407] [TTM] Initializing DMA pool allocator
    [ 9.104455] [drm] radeon: 512M of VRAM memory ready
    [ 9.104459] [drm] radeon: 1024M of GTT memory ready.
    [ 9.104497] [drm] Loading SUMO Microcode
    [ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
    [ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
    [ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [ 9.170455] Linux video capture interface: v2.00
    [ 9.179293] mousedev: PS/2 mouse device common for all mice
    [ 9.223473] [drm] Internal thermal controller without fan control
    [ 9.223622] [drm] Found smc ucode version: 0x00011200
    [ 9.223730] [drm] radeon: dpm initialized
    [ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 9.282345] radeon 0000:00:01.0: WB enabled
    [ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
    [ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
    [ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 9.283082] [drm] Driver supports precise vblank timestamp query.
    [ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
    [ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
    [ 9.283145] [drm] radeon: irq initialized.
    [ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
    [ 9.298931] rtlwifi: rtlwifi: wireless switch is on
    [ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
    [ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
    [ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
    [ 9.307058] sound hdaudioC0D2: inputs:
    [ 9.307061] sound hdaudioC0D2: Mic=0x18
    [ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
    [ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
    [ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
    [ 9.369840] [drm] UVD initialized successfully.
    [ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
    [ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
    [ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
    [ 9.789309] usbcore: registered new interface driver uvcvideo
    [ 9.789319] USB Video Class driver (1.1.1)
    [ 9.871399] cfg80211: World regulatory domain updated:
    [ 9.871412] cfg80211: DFS Master region: unset
    [ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
    [ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
    [ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 9.890507] [drm] ib test on ring 5 succeeded
    [ 9.911771] [drm] radeon atom DIG backlight initialized
    [ 9.911776] [drm] Radeon Display Connectors
    [ 9.911777] [drm] Connector 0:
    [ 9.911779] [drm] VGA-1
    [ 9.911780] [drm] HPD2
    [ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 9.911783] [drm] Encoders:
    [ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
    [ 9.911786] [drm] CRT1: NUTMEG
    [ 9.911787] [drm] Connector 1:
    [ 9.911788] [drm] LVDS-1
    [ 9.911789] [drm] HPD1
    [ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 9.911791] [drm] Encoders:
    [ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
    [ 9.911793] [drm] LCD1: TRAVIS
    [ 9.911794] [drm] Connector 2:
    [ 9.911795] [drm] HDMI-A-1
    [ 9.911796] [drm] HPD5
    [ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 9.911799] [drm] Encoders:
    [ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
    [ 10.016569] [drm] fb mappable at 0xC0478000
    [ 10.016576] [drm] vram apper at 0xC0000000
    [ 10.016578] [drm] size 5787648
    [ 10.016580] [drm] fb depth is 24
    [ 10.016582] [drm] pitch is 6400
    [ 10.016970] fbcon: radeondrmfb (fb0) is primary device
    [ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
    [ 10.143532] Console: switching to colour frame buffer device 200x56
    [ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
    [ 10.150312] radeon 0000:00:01.0: registered panic notifier
    [ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
    [ 10.194853] cfg80211: Calling CRDA for country: US
    [ 10.231380] cfg80211: Regulatory domain changed to country: US
    [ 10.231393] cfg80211: DFS Master region: FCC
    [ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
    [ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
    [ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
    [ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [ 10.422003] XFS (sda3): Mounting V5 Filesystem
    [ 10.837256] XFS (sda3): Ending clean mount
    [ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
    [ 11.195453] microcode: CPU0: new patch_level=0x03000027
    [ 11.195496] microcode: CPU1: new patch_level=0x03000027
    [ 11.195601] microcode: CPU2: new patch_level=0x03000027
    [ 11.195693] microcode: CPU3: new patch_level=0x03000027
    [ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
    [ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
    [ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.753012] wlp4s0: authenticated
    [ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
    [ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
    [ 13.758283] wlp4s0: associated
    [ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
    [ 23.961417] PM: Syncing filesystems ... done.
    [ 24.305227] PM: Preparing system for mem sleep
    [ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 24.311542] PM: Entering mem sleep
    [ 24.311898] Suspending console(s) (use no_console_suspend to debug)
    [ 24.320753] wlp4s0: deauthenticating f

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

  • Laptop screen won't turn on

    Screen won't turn on. Nonlights will light up on the keybaord aside from the WiFi light and power light. Normally there is a light for mute, capslocks and the finger mouse. Tapping any one those buttons does not turn the lights on.

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and see that you are having issues with your Notebook PC. I understand that the Notebook PC will not turn on. You had mentioned that the Wi-Fi light and the Power Light do light up on the Keyboard. I  would be happy to assist you, I just need your Model Number (How Do I Find My Model Number or Product Number?) Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. Try restarting once everything is disconnected.  If that does not work, here is a document called HP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP).  Have you tried performing a hard reset?Did you receive any error messages before this happened?You said you do get some lights, do you hear any beeps? Is there blinking lights? HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code.  If the troubleshooting steps get the Notebook to boot back up, please do a Hardware Test. Please follow the provided troubleshooting steps and let me know how it goesHave a great day!

  • Laptop screen won't turn back on after being waked up from pm-suspend

    I installed pm-utils and acpid to make my laptop sleep when the lid is shut.
    To do this I altered my /etc/acpi/handler.sh to look like this
    http://pastebin.com/9DgQQ30Z
    Changing lines 57, 58 and 59 to:
    button/lid)
    #echo "LID switched!">/dev/tty5
    /usr/sbin/pm-suspend
    esac
    The laptop suspends completely fine, and the power light turns from a solid light to flashing. But when I open the lid, the laptop wakes up fine, except for the screen which just stays completely black.
    I can't do anything to get it back on, I even can't switch to any virtual terminals, forcing me to to a hard reboot.
    This happens also when I just run "sudo pm-suspend" normally with the lid open and use the power button to wake back up. Wakes up fine except for the screen.

    First thing that would be helpful to know would be to know what kind of computer you have (e.g. model).
    I actually had an identical problem with my laptop. It ended up being an issue with the wireless drivers included in the kernel. Ultimately had to blacklist them and install the ones from the vendor's website. Anyways, start with the model, and we can try to help you from there

  • Laptop screen won't turn on after sleep, requires reboot

    I close the screen to my Macbook Pro when going to be away for a length of time.  Until recently, the screen would turn on when I opened the computer.  Now, although the computer is on, the screen won't light up when I open it.  The laptop now requires a forced rebook in order for the screen to work.  Will this require a service call?

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Pavilion dv6-2044ca laptop screen won't turn on, unresponsive

    Hi, I have an HP Pavilion dv6-2044ca laptop that was purchased in late 2009, running windows 7. It was working normally the other night when I went to get a drink, and when I came back the screen was off. I couldn't get the screen to turn back on by moving my mouse, so I shut the computer down and restarted it. When I started it back up, it sounded normal, but the screen continued to not turn on. I tried taking out the battery and holding the power button for the power reset method referenced often on these forums, to no avail. I hooked it up to an external monitor but nothing showed up. When turned on, the caps lock and num lock lights won't turn on, however the light indicating it's plugged in, the lights for sound and wifi, and the light indicating the mousepad is turned on all light up. I have made no changes to the hardware or software in weeks. I'm at a loss as to problem solving methods at this point, and would greatly appreciate a more experienced opinion on the matter!
    Kevin

    Try a hard reset. Remove battery and AC power. Hold down power button 30 seconds. Now put AC power to it and try to fire it up. It is a 100 to 1 longshot but worth trying. If that does not work it ain't sounding good. Maybe try removing and reseating the RAM sticks, but other than that a new motherboard might be the only fix. 

  • My mac book from August 2006 screen isn't turning on.

    It powers on but nothing happens. The disk drive engages and the sleep mode light comes on but that's it. I have tried doing the PRAM reset, shift-power reset, etc... nothing, no responses from my computer what so ever. I tried to reboot with the original disk that came with it just after an attempt of turning it on but my computer just ate it and now the disk won't come back out. Does anyone know what I could do?

    Buy a new computer or pay to have this one repaired.

  • Dual Display - Laptop screen won't wake up 50%+ of the time

    My laptop is connected to an external monitor, with the monitor set as the primary display.
    I put the laptop to sleep by closing the lid.
    Often, when I open the lid the laptop screen will not turn on. Just the monitor, and then it acts as if it is a single display. The only way I've figured out how to fix this is to completely shut down the laptop and boot back up.
    This started suddenly last month, right after changing jobs. The new job had an unknown amount of software installed (including MS Entourage) and the entire system encrypted by the new company's IT department. I don't know if these are related, but the coincidence is hard to ignore.
    I also will occasionally not be able to fully wake the computer. I'll get a black screen and a mouse cursor but never get the log in prompt to bring it out of screen saver mode. This problem sometimes occurs with the above issue, but often they are separate. Though this also just started. (I suspect this second issue could just be performance problems with new software bogging down the system over several days). Although the same solution is to shut down the system. It's just that in this case, the only way to shut down is to force it with the power button.

    I have a similar problem that just started recently. I've been using a dual monitor (Wacom Cintiq) since last Novemeber, and now at random times when I attempt to wake up the computer I get a black screen on both monitors. I know the computer is on because of the system beeps I generate while pressing the keys. The monitor just won't come on. Normally I thought the power light below the latch opening would cycle up and down, while asleep, but when this problem happens it is just on. When the lid is opened the light fades out. Computer is running, just no screen. The last time this happened I had to power it down. I've tried disconnecting the Wacom Cintiq monitor, the external keyboard and the Wacom tablet. No Luck.

  • 15" i7 Macbook Pro from early 2011.takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get

    Hello All,
    I have a 15" i7 Macbook Pro from early 2011. The past few weeks, it has been getting increasingly difficult to get on my computer. It takes the mac laptop two or three tries to boot successfully. It would turn on, show gray screen, shut down, turn on again, show gray screen, shutdown, and then turn on, show gray screen, before it can finally get to the dark gray log-in screen. Even when I finally get logged in to start working, thinking it would be okay now, it shuts down randomly.
    I've ruled out the possibility of a software problem because I've just done a clean re-install of Mac OS X Mavericks on my computer just yesterday.
    I did upgrade the RAM recently, about a month and a half ago, from 4GB to 16GB, I went to the apple store four days after that upgrade to have them do a hardware test, and clean the inside of my laptop, which helped with previous heat issues. When they did the hardware test, the hardware was all registered as fine from their system.
    I've tried resetting the SMC, PRAM, and doing the internet recovery hardware test, but to no avail. I thought I could at least find out what parts needed to be replaced from the hardware test but it seems that when the hardware test is almost finished, the computer just shuts down, So I am unable to see the results.
    My computer is also having battery issues, under battery condition, it says "replace now," parts have been ordered, waiting for arrival. But if the battery health is low, it should still boot up fine, it would just hold a significantly less charge.
    Could this be a hard drive issue?
    Has anyone had similar symptoms and how was it resolved?
    Does anyone know what I can do to alleviate this issue?
    I haven't had time to take it to Apple because I'm currently taking a 21 credit semester academically. I'm an art and design student so my computer is basically the bane of my existence. Help! Any constructive advice is welcomed!
    Thank you so much for your input!
    -Christina C.

    Problem description:
    The Hard Disk is failing.
    EtreCheck version: 2.0.11 (98)
    Report generated November 4, 2014 at 7:59:28 AM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 1024 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:3:43
    Disk Information: ℹ️
      TOSHIBA MK7559GSXF disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      HDV4 (disk0s2) /  [Startup]: 749.30 GB (712.10 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [invalid?] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
    User Login Items: ℹ️
      None
    Internet Plug-ins: ℹ️
      AdobePDFViewer: Version: 10.1.1 Support
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
      Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
      Avast Online Security
      Trovi Search for Safari
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          16% mds
          7% WindowServer
          1% loginwindow
          1% fontd
          1% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB com.avast.daemon
      86 MB Google Chrome
      52 MB Finder
      52 MB WindowServer
      41 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      13.45 GB Free RAM
      1.34 GB Active RAM
      944 MB Inactive RAM
      1.43 GB Wired RAM
      1.11 GB Page-ins
      0 B Page-outs

  • My screen has turned black as if the LCD screen isn't working. There is no damage and the phone is still responding to vibrations and there is a dial tone when called. What is wrong with my phone?

    My screen has turned black as if the LCD screen isn't working. I have tried using the lockbutton and home button to turn it on, but it doesn't work. What should I do?

    Your phone is probably broken.

  • Turn off laptop screen when using hdmi

    I have my Macbook connected to a tv using HDMI.  How do I disable the laptop screen when in this mode?

    turn the brightness to zero    turns off laptop screen doesnt affect the TV 

  • Can i turn the Laptop screen off while connecting the TV?

    Dear All,
    I am connecting my Mac to TV 32'' via mini display port converted to HDMI.
    I am using it on MAC OS X 10.6.6, and on Windows 7 Ultimate SP1 also.
    when i am connecting my TV, the 2 screens are on, Laptop screen and TV screen.
    Can i turn the Laptop screen off while connecting the TV?
    how to do this on both operating systems?
    Thanks & Regards,
    Boudy,

    The quick answer is, hook up the tv to the computer, close the lid, then wake the computer up by clicking the mouse while the lid is closed. Not sure if it'll work while running windows, but I'd bet it does if you have the mac drivers installed on the win os.

  • My laptop screen isnt proceeding or turn on quickly

    Hello im from lebanon
    i have a laptop hp compac mini i use it for projects. I have a problem in turning on the laptop. Once i turn it on it takes one hour to see the screen on. Then i can't do anything cause it is toooo slow!
    My small cousin used it and i donno what happened pls help me
    This question was solved.
    View Solution.

    dimakabakibi wrote:
    Hello im from lebanon
    i have a laptop hp compac mini i use it for projects. I have a problem in turning on the laptop. Once i turn it on it takes one hour to see the screen on. Then i can't do anything cause it is toooo slow!
    My small cousin used it and i donno what happened pls help me
    Sounds like your cousin got it infected with malware or virus since you can still see the screen but it takes forever to do anything. Your going to needed to use the HP Recovery Media and wipe it clean and redo the computer to fix the problem.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Maybe you are looking for

  • Time Machine Taking a Long Time to Index

    Hi everyone. I first noticed this today.  My Time Machine is taking a long time to index.  It's stuck on "Waiting for index to be ready (100)" for about 10 minutes at least, it seems.  I did notice earlier today that it had to delete old backups to m

  • Mac Pro small business server; RAID problems

    Our company runs on a small network consisting of 8 workstations (iMac's) and 1 dedicated server: a 1,5 year old Mac Pro running OS X Snow Leopard Server. This machine has 2 hard drives of 1TB each, running in a mirrored RAID configuration. This conf

  • Subportal doesn't change when the user's group is changed, until next login

    Hi, We have two subportals: Physician and Resident. We also have two groups: Physicians and Residents. Users belonging to Physicians see the Physician subportal when they login, and Residents see the Resident suportal. When a Resident becomes a Physi

  • Re: Battery Drains Faster in iOS 5 ?

    Hello, I have marked that Battery drain faster if using apps in iOS 5 then the previous version, but the idle time is better in iOS 5. In my case after fully charged, my phone show 100%  if its in idle mode for 7 hours, but as soon as i start some ap

  • There is NO PICTURE

    I can hear the sound but i cannot see the picture its just black It doesn't work when I tried to fix it. In Verizon box, there is a red light on "relplacing batteries'  I am not sure but I think that is the reason