Laptop shuts down when connecting Nano...

When I connect my Nano to my laptop running XP, the laptop shuts down and goes dormant for ten-fifteen minutes afterwards. Seems like the iPod is sending a charge to the laptop. Any suggestions or advice? Please help - annoying.
ibm t42 Windows XP

Welcome to Apple Discussions!
Try this...
iPod not recognized when connected to Windows laptop over USB
btabz

Similar Messages

Ipod shuts down when connected to headphones

My ipod nano 6th gen shuts down when connected to headphones. Also, when i use the volume buttons, the speaker icon comes up, but volume does not change. Please help.

Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
iTunes & iPod Hints & Tips
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

MBP shuts down when connecting to power

Since a week or two, my MacBookPro from early 2011 shuts down when connecting the magsafe to power. Also when starting up again it will start up fine and fast from battery, but I need to hold the power button for several seconds when connected to power.
Another problem I had earlier as well is CPU (kernel task) of over 90%, which I now see clearly, only occurs when connected to power. I used to solve this problem by putting the MBP to sleep, but now, when put to sleep, it will shut down.
When on battery, I have no CPU problem and can put machine to sleep without a problem.
I recently started uploading everything to dropbox, and activate caffeine to make sure it will keep uploading. My computer will run for days on power combined with caffeine, but is as slow as **** because of a >90% CPU.
The battery has had a notification for maybe a year, that it needed service, so today I finally bought and installed a new battery, but the problem is not solved. Is this software or could it be my magsafe adapter? Thanks for you help.

It sounds like a problem with the power management inside your MBP. I suggest you call Apple to make an appointment at your local Apple store for them to check it out for you.

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Laptop shuts down when trying to connect

Bought a WRT110, installed software, and everytime the router and the wi-fi on my laptop are turned on, the laptop shuts down and restarts. Anybody have this problem before?

I have the same problem. I just installed a new WRT160N on the desktop but my Toshiba M35x-S311 shuts down when I switch on the wireless connection. What's going on?

Laptop automatically shuts down when connect ipod PLZ HELP

Well basically my ipod 30gb video shuts down when i try to put a video or picture on it however when i put songs on its fine.

All I can offer is these list of solution steps, perhaps it's a software problem or you need to do a SMC or PRAM rest
Step by Step to fix your Mac

X200 hangs during restart or shut down when connected to ultrabase

My X200 hangs during a Windows restart or shut down when I'm connected to my ultrabase. The laptop appears to go through most of the processes to restart/shut down but eventually hangs at a blue screen with unmoveable cursor (note, not a Windows BSOD). I'm forced to perform a hard shut down to turn off the laptop.
This hang at restart/shut down only occurs when I'm connected to the ultrabase.

Just as a thing to try, and this is assuming that you all have an integrated camera, please try this camera driver and let the board know the results:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70600

IP4 AUTO-SHUT DOWN WHEN CONNECTING TO WI-FI

Hi, fellow apple users, my name is ace, I'm from the phillippines. I ordered my Iphone from singapore, using a singapore address of a friend of mine and have it shipped there then delivered to me through Singpost here in the Philippines.
I Noticed that my Iphone 4 Automatically shut-down when it connects to a wi-fi or internet sharing while i'm in the office. Was this normal or there was a problem with my phone, Here is the serial number: 830**0A4T
<Edited by Host>

HI Ace,
Try here: Troubleshooting iPhone Hardware
Click: Connectivity / Network: Wi Fi issues
Carolyn

BlackBerry Desktop Software shuts down when connecting secondary device

All,
I have a main and a secondary phone (used for local SIM when traveling abroad)
After I backup my main device I connect my secondary device to be able to "Restore" and have all my contacts sync on both, but alas, once the secondary device is trying to connect the Desktop Software just shuts down without giving any error
The Backup process itself works great
I use the same cable, same USB Port, both devices have a charged battery and work great on a day to day basis
Main Device: BlackBerry 9900
Secondary Device: BlackBerry 9870
Desktop Software Version: 7.0.0.59 (May 16, 2012 Bundle 60)
Laptop OS: Windows XP Professional SP3
Thanks

I'm not familiar with this particular package, but with similar packages from other carriers there's usually a setting that lets the program control your Network - it may only say Wi-Fi.
The BlackBerry drivers include a Dial-Up connection which is probably getting shut down by the software which kills Desktop Manager.
If you turn off that option, the problem should go away (reboot probably a good idea).
Jerry

Cannot sleep or shut down when connected to TV through DVI

I recently reinvigorated my 2003 Power Mac G5 (Power PC) with a clean install of OSX Leopard and connected it to my TV via a VGA cable and DVI adapter. I soon discovered the computer would not sleep or shut down with the TV connected:
- Selecting "sleep" from apple menu, OR
- Pressing sleep button on original ADC monitor (with both monitors connected,) OR
- Waiting for 15 minute automatic sleep mode:
computer sleeps (tower clicks off as normal) but immediately wakes again
- Selecting "shut down" from apple menu:
computer shuts down completely but immediately reboots
When the G5 runs on only the original monitor, sleep and shutdown commands work as expected.
Aside from unplugging the DVI adapter every time I want to sleep or shut down, is there a solution to this problem?

I've seen the TV problem before, not sure there is a cure, but perhaps one of these...
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID15122041&partno =30011&search=VGA_SWITCH&rsite=&rcode=
The DVI ones don't have high enough resolution...
http://www.pccables.com/cgi-bin/orders6.cgi?action=Showitem&id=ID15122044&partno =81112&search=DVI_SWITCH&rsite=google.comsearc&rcode=

2011 MBP shuts down when connected to external display

I've been using my 2011 15" MBP for about a week now with no problem until today when I tried to connect it to my old 20" cinema display. I have the mini display port hooked up to the dvi adapter and a usb connection hooked up to external keyboard and mouse. Everything works just fine if I keep the lid up on the MBP, but if I shut the lid, the MBP shuts down. Down, not that the big screen goes black & then comes on again. It turns itself off.
Any way I can avoid a trip to the Apple store? In the past, the "geniuses" knew less about external displays than I did. Is there an issue because of the dual graphics cards?

no - I realized later that the machine doesn't shut off it just acts like it. The hard drive stops spinning & the screen remains black no matter what I do. This doesn't happen when I just shut the lid & then go back to working on it.
Then if I shut it again & try to get the monitor to respond, I get a blue screen of death color with a two inch band of blue noise along the left side. Very weird.

Laptop shuts down when I start FCP

Two days ago in trying to resolve an issue (Which I did solve by reading and following another solution later) I "reset my computer's PRAM by doing the following:
1.Shut down the computer.
2.Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3.Turn on the computer.
4.Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5.Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6.Release the keys.
This did nothing that I could notice....Anyway as I said earlier I was able to fix my problem by another means.
BUT TODAY WHEN I TRIED TO OPEN FCP... THREE TIMES IN A ROW THE COMPUTER STOPPED (AND TOLD ME TO RESTART MY COMPUTER by HOLDING DOWN THE START BUTTON FOR SEVERAL SECONDS....BLAH BLAH BLAH ERROR MESSAGE IN ENGLISH FRENCH GERMAN AND JAPANESE!!)
BOTTOM LINE IS THE COMPUTER GOES FROZEN WHEN I TRY TO START FCP
I suspect that reseting my PRAM as per above screwed up my instalation of FCP...?
WHAT IS THE SIMPLEST WAY TO GET MY FCP BACK UP AND RUNNING....
ALL OTHER PROGRAMS SEEM TO WORK FINE, I MOVIE, SOUNDTRACK PRO...FCP IS THE ONLY ONE I'VE NOTICED THAT CAUSES THE COMPUTER TO TELL ME TO RESTART...
IS THERE A GURU OUT THERE THAT KNOWS WHAT I SHOULD DO TO FIX THIS SOFTWARE ISSUE....?
THANKS...
what do you think?
Power Mac G4 Mac OS X (10.4.5)
Power Mac G4 Mac OS X (10.4.5)
Power Mac G4 Mac OS X (10.4.5)
Power Mac G4 Mac OS X (10.4.5)

I am the same guy that posted the above question and to add information for the guru who will solve this issue... once I restarted my laptop after it shuts down...it asks me if I would like to send a report to apple...when I said yes... this is the message that is sent:
panic(cpu 0 caller 0x426293BC):
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000000 PC=0x000000000002EB4C
Latest crash info for cpu 0:
Exception state (sv=0x42664000)
PC=0x0002EB4C; MSR=0x00001030; DAR=0x00000000; DSISR=0x40000000; LR=0x00026878; R1=0x2C612320; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00026878 0x426293BC 0x4262935C 0x425D627C 0x42602A14
0x425EF87C 0x425F0640 0x425F0A4C 0x42606A70 0x425F40AC 0x4261C8A0 0x426110C4 0x4261165C
0x42612CE0 0x000F8FC8 0x0010D1FC 0x0010D478 0x0010D7DC 0x0010DA00 0x000FB124 0x000E1EE8
0x000E1A7C 0x000D3864 0x002AAE28 0x000AB930 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.udf(1.4.1)@0x425d2000
Proceeding back via exception chain:
Exception state (sv=0x42664000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x4270C780)
PC=0x9001C040; MSR=0x0000F030; DAR=0x42FCEFA0; DSISR=0x40000000; LR=0x90B95314; R1=0xBFFFB420; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095138 0x00095650 0x00026898 0x000A7E04 0x000AB780
Proceeding back via exception chain:
Exception state (sv=0x42664000)
PC=0x0002EB4C; MSR=0x00001030; DAR=0x00000000; DSISR=0x40000000; LR=0x00026878; R1=0x2C612320; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x00026878 0x426293BC 0x4262935C 0x425D627C 0x42602A14
0x425EF87C 0x425F0640 0x425F0A4C 0x42606A70 0x425F40AC 0x4261C8A0 0x426110C4 0x4261165C
0x42612CE0 0x000F8FC8 0x0010D1FC 0x0010D478 0x0010D7DC 0x0010DA00 0x000FB124 0x000E1EE8
0x000E1A7C 0x000D3864 0x002AAE28 0x000AB930 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.udf(1.4.1)@0x425d2000
Exception state (sv=0x4270C780)
PC=0x9001C040; MSR=0x0000F030; DAR=0x42FCEFA0; DSISR=0x40000000; LR=0x90B95314; R1=0xBFFFB420; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPCModel: PowerBook5,8, BootROM 4.9.6f0, 1 processors, PowerPC G4 (1.5), 1.67 GHz, 2 GB
Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR2 SDRAM, PC2-4200S-444
Memory Module: SODIMM1/J23REVERSED, 1 GB, DDR2 SDRAM, PC2-4200S-444
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: Jump, , V.92, Version 1.0,
Bluetooth: Version 1.7.8f2, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci106b,4318, sppci_othernetwork, SLOT-A
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
PCI Card: usb, usb, USB20
PCI Card: usb, usb, USB20
PCI Card: usb, ehci, USB20
Parallel ATA Device: ST910021A, 93.16 GB
Parallel ATA Device: MATSHITADVD-R UJ-846, 7.61 GB
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
I just wanted to give this information here in case it will help you resolve this issue for me....
thanks a lot...
Power Mac G4 Mac OS X (10.4.5)

Itunes shuts down when connecting Ipod HELP

Recently when I connect my Ipod to my Itunes a windows error message appears and shuts down itunes for me. The message reads that Itunes has encountered a problem and needs to shut down. I am unable to transfer any music, play songs off my ipod, or delete songs off my ipod. I have reinstalled Itunes several times. All of my songs are stored on my IPOD only so reseting would erase all of them. PLEASE HELP!!!

Yes this used to happen to me also. Heres how to fix it. If this event just started happening after you have downloaded new music, I know how to fix it. Sort your iTunes by DATE ADDED. Then start clicking on the songs or videos, etc. in order from top down. When you click on a certain one(s) and iTunes shuts down, this is what you do:
1. Find the file(s) on your computer by doing a computer search from the start menu.
2. When you locate the file(s), click on it or them and send them into your recycle bin or trash for mac users.
3. Then open iTunes.
4. Locate the file(s).
5. They should have a little ! next to them.
6. When you click on them, iTunes won't shut down.
7. Just right click on the file(s) and delete them again, this time from iTunes.
8. Reset your iPod.
9. Connect it.
10. Your problem is solved!

Shuts down when connected to itunes

I was given an iPod and I think there's something fishy about it. First of all, it looks like an iPod Classic. It says 80GB on the back metal casing (the front is white), but in the setting it says it has 159GB available, but the capacity id s 903MB. When I connect it to iTunes, it says "DO NOT DISCONNECT" and shows up that it's connected for about 1-2 seconds, then the whole iPod shuts down and restarts itself. Is there anything I can do to fix this or is this a worthless piece of junk at this point?

Hi Residae,
I understand you are having issues when connecting your iPod to iTunes. Lets see if the iPod Troubleshooting Assistant resolves this:
iPod Troubleshooting Assistant
Reset
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip:
If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
If the above does not help, please try the remaining 4 steps.
Thanks,
Matt M.

BB Shuts Down When Connecting To Desktop

I just got a BlackBerry Curve and was able to connect and sync with the BlackBerry Desktop Managment software only one time. Since then, nada. Everytime I plug into the USB, the BlackBerry either shuts down immediately (red light comes and BB tries a restart) or the desktop momentarily recognizes the device before it disconnects and shuts down.
I'm running Windows XP and BlackBerry Desktop Managment software version 4.3.0.17
Oh, and I've already uninstralled/reinstalled the desktop software and rolled back my system to an earlier date in case there was some conflict with other software.
I see others are having this problem too, but haven't seen a solution.
Any help would be greatly appreciated!
Thanks.
Message Edited by charper2430 on 05-16-2008 11:35 AM

I had and have the same issue here as well. First time I plugged in my 8330 to my computer it connected fine then wipes the OS and started the whole shutdown reboot thing. After I finally got it to connect to my laptop at work I was able to FINALLY get the OS back on it and use my Curve.
I have tried on 3 different computers and it is only affected by 1 computer. My primary tower at home which is less then 4 months old with a quad core intel. My Pearl was never affected by this issue at all and still works flawlessly. I bought my Curve out right because I wanted the bigger screen and the picture message capability not knowing the headaches that came with it.
I sincerely hope that RIM is working on this because spending the amount of money that I do each month on service and the fact I out 2 blackberry's now and only one is 100% usable really ticks me to no end.
Sorry for the rant folks but I am with you on this. Tried just about everything short of reformatting my computer which I I refuse to even think about doing.
P.S. Forgot to add. Using Vista Home Premium.
Message Edited by whitewolf68 on 05-22-2008 10:34 PM

Laptop shuts down when connecting Nano...

Similar Messages

Maybe you are looking for