Laptop slow to get connection

I just installed the wrt110 and was having problems with losing my connection when i was on my cordless.. i changed my channel to 11 and it seems to be working better.
My problem now is that my laptop is taking forever to connect to the router each time it shuts down or hibernates...it will show that it has limited access for about 2-3 minutes while it is trying to connect... any suggestions on how to get connection quicker to my laptop... once i am on the speed seems good, it's just getting on that is taking a while...please be very specific, this is my 1st time installing a router, a friend has helped me in the past, but i wanted to see if i could do it on my own this time..
thanks

You can try to turn Off the power scheme or hibernation option on computer .

Similar Messages

When i connect my ipad to the laptop ,it doesnt get connected

when i coonect my ipad 2 to da laptop
its doesnt get connected
but wen i connect it to my pc it gets connected
hence wt m i supposed to do to coonect ym ipad to the laptop

You do realize, even if you get it to connect, you can't sync one iPad to two different computers right?
Beyond that, iPads connect to computers running the latest iTunes. So if your laptop doesn't have iTunes, install it and try again. Also, try different USB ports. Your laptop is likely missing the Apple Device driver. You need to plug into different USB ports to trigger its auto install, or google how to install it.

Domained laptop - slow logon when connected to non-domain network

Hi,
I'm looking for ideas on how to solve or workaround this issue, so any help would be appreciated. Please note that this doesn't appear to be the usual type of "slow login" problem - in fact I'm pretty certain the issue is caused by public DNS
servers which return placeholder IP addresses for unknown domains, rather than correctly reporting them as being unknown, which is making XP "hang up" looking for servers which don't really exist. Either way, it's causing a lot of problems for our remote
users.
The scenario is this. When domain-member laptops are not on the domain network, they can take anywhere between 5-30 minutes to login. This issue only occurs when the network they're connected to presents DNS servers which resolve unknown DNS
hosts/domains to "placeholder" sites. Whilst Windows 7 laptops do also seem to suffer from this, login delays on those are at worst a couple of minutes, whereas the Windows XP machines are affected for much longer.
Maybe a bit more info will make it clearer :)
The AD namespace shares the external domain, and there are public DNS records for the external domain, but obviously not for internal hosts (like DCs). So internally, the FQDNs of the domain controllers are "DC1.company.com", "DC2.company.com" etc.
When the laptop is connected to users home network, users can logon quickly (<30 seconds), as long as the DNS server offered by DHCP on that network doesn't return an IP for hosts/domains which don't exist publicly. If they do, login takes 5-30 minutes.
I've confirmed this by doing a lookup of the domain on the affected networks to ascertain which DNS servers return placeholder IPs rather than reporting that name resolution isn't possible. For example, OpenDNS's servers (208.67.222.222, 208.67.220.220)
return placeholders, Google's (8.8.8.8, 8.8.4.4) don't. Using OpenDNS to lookup "dc1.company.com" returns their placeholder IP of 67.215.65.132, using Google's returns "can't find dc1.company.com: Non-existent domain". OpenDNS is being used
as an example, increasingly ISP's seem to be using redirection, we're getting this issue with BT and Virgin Media networks, plus a couple of others.
So, if I manually set DNS on a laptop to use Google's servers, then connect it to one of the affected networks, login is virtually instantaneous. I remove the manually configured DNS servers and allow DHCP to present the ISP's own servers, login is
seriously delayed.
From this I can only assume that the fact that the names are resolving at all is causing the delay. I've removed possibly contributory factors from the equation, such as roaming profiles, redirected folders, mapped drives, group policy etc which the
workstation might be trying to access and causing a delay, as well as checking that fast logon optimization is active.
At the moment we're having to tell users to not connect to the network until after they've logged in, which you'd think wouldn't be that big a deal but you know what users are like :)
I appreciate this issue really seems due to bad practice by ISPs rather than with Windows itself, but we really need a fix we can apply ourselves. Reconfiguring users' home networks really isn't an option, there's too many of them, plus that wouldn't
solve the problem when they're using other networks (hotels etc). I don't think setting "good" DNS servers manually is an option, certainly I can't think of a way that would still work when they're connected to our internal LAN.
I'm thinking there must be some way we can set a timeout or something on the workstations so they don't spend so long trying to communicate with what they think are domain servers, but dispite much searching, I've been unable to find anything that works.
So, any help would be gratefully recieved.
Thanks

Thanks for the reply Martin, unfortunately it didn't help matters, but after pondering for a while (and eventually kicking myself for missing something so obvious) I did come up with a solution.
Basically, just set up public DNS A records for the internal servers and point them to 127.0.0.1 (setting up a wildcard DNS entry for the domain also pointing to 127.0.0.1 would do the same thing).
Sure enough logon now takes about 5 seconds, even on the Windows 7 machines (which were only taking a minute or so anyway).
Loopback is the best place to point these to, Pointing them to a public server didn't work, and pointing them at a non routeable private IP didn't work either.
To help anyone else confirming this is also the cause of their slow logon issue - when all three conditions are met it's time to mess with your public DNS!
The FQDN of the domain is public (company.co.uk) and not local (company.local).
The DNS servers in use on the network (or the ISP's DNS servers to which DNS requests are forwarded) return placeholder IPs for unknown host addresses, rather than a "non-existent domain or host" error. This can be confirmed by pinging (or doing an
nslookup) on the affected machine, for a host for which no public DNS record exists (ie ping wibble.microsoft.com) - if an IP address is returned then the DNS servers in use are resolving unknown hosts/domains to a placeholder IP.
If you allow the machine to login on the external network, then run a
ipconfig /displaydns you'll see entries for attempts to resolve internal servers themselves, plus lookups relating to the AD domain such as
_msdcs.gc._tcp._ldap.internaldomain.co.uk and such - these shouldn't be there off-domain, and I believe they indicate the machine thinks it's on the domain, even though it isn't.
Hope this helps someone else out.
Ray Von

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!

Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid.

I have a Mac Book Pro, lately if the laptop has been at rest for the night, I need to restart it to get connectivity to the internet. What can I do to cure this problem?

I have a Mac Book Pro, lately if the laptop has been at rest for the night, I need to restart it to get connectivity to the internet. What can I do to cure this problem?

Hi Bluedrake
Please download the CS6 Trials from below link : Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
Follow the instructions to Start your Download ...
Use your Serial Key to Activate them ....

For a LAN network in my office, all laptops are Windows based and the internet is through LAN and other computer get connected with adhoc without the router. My Apple computer nor my iPhone 5 get connected. How do I connect to this Internet?

In the office, All my colleges use Windows laptops. The Internet connection is out of LAN wire installed in one of the computers. Others use Internet by creating adhoc connection. However none of the apple products are being able to connect to this connection.How can i connect my MacBook Pro or iPhone 5 to this Internet network?

Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

Ipad wont charge when connected to laptop but charges when connected to wall outlet

ipad wont charge when connected to laptop but charges when connected to wall outlet

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Slowness in the connection attempt

Hello all!
I have Cisco AP 1200 Series configured with 802.1x with Cisco ACS working integrated with MS Active Directory. Always that I lose connection the Win XP get slowness in the connection attempt. Have somebody here that has adjusted this type of problem?
Thanks.

So when you loose your connection, however that may be... And then your laptop attempts to associate, it take an abnormal amount of time only on XP and not say on windows2000?
Have you reviewd your ACS Failed attempt logs? Do you possibly have more than one ACS server configured on the AP?

I need help setting up a wireless network and getting connected to the internet. I have a RCN cable modem now and tried to install a wireless linksys today and it was a disaster

I have a MAC desktop and RCN cable that I have internet through now. I tried to set up a linksys wireless router today and could not get the network settings right, or figure out how to create the network, or get connected. I was successfull for only a few minutes because my phone and laptop had picked up the signal. However my desktop still would not connect to the internet. I had to restart my cable modem after because even after returning to directly inserting the desktop to the modem I could not get on the internet. I am able to get on now but would like to have wireless for my laptop and phone. Do I have to have an Apple router? Are there any easy steps I can take to set up a network without doing any damage to my desktop? I am so lost and have been getting pop ups and even my time changed.
Please help a new person to Apple!

why dont you go to linksys.com/downloads and get the quick install for your adpter

My Ipod Touch is not getting connected to the itunes its showing error

my ipod dose not get connected in the itunes its goin on showing an error message whn ever i connect kindly help me plz

it says tht the ipod cannot connect to d itunes and on my ipod screen an image only i can c the image is like when u buy the ipod and connect it for the first time to your laptop u can see an image right asking u to connect to the itunes only that image i can c and on my itunes page it shows an error that my ipod cannot connect......

"Get connected" for the dummies please!

Hello,
I bought this Palm TX more than a year ago and although my numerous efforts, still can't get connected to the internet. Would anybody tell me how to get connected in simple steps please?
Please note the following:
- My laptop uses Windows Vista and WiFi enabled
- I am connected to broadband internet through a normal (not wireless) router
- I don't have any home networks
Thank you
Post relates to: Palm TX

The TX is designed to connect to a wireless network. Wifi is built into it for this purpose, and is very easy to use! Wireless routers can be found for around $30 these days.
Since you have no wireless network, you are limited to connecting via BlueTooth through a cell phone, or via the Hotsync cable to your computer. The latter can be accomplished by purchasing a program called Softick PPP from softick.com. (You can also use BlueTooth to connect if your computer has BlueTooth built into it.)
I have connected mine through a cellphone and with my wireless network at home, but never via the cable. It just didn't make sense to me to use my TX when a real computer is 3' away...
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

WLC 5508 : WPA2 enabled SSID - especially Intel & Dell wireless cards are not getting connected

Hi ,
I have one pecular issue in my wireless lan set-up. I have some laptop users who are using below inbuilt wireless adapter/cards :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1 ) Dell wireless 1397 WLAN Minicard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
2 ) Intel Centrino Advanced N6200 AGN
above card are having issue with WPA2 enabled ssid connecitivity. strange is , the same users are getting connected to other wep enabled SSID but its not working for WPA2 SSID.
I have external ACS server which is used for radius authentication. Last time I had put same query in support forum did some workaround.
eq. disabling DHCP proxy option in WLC and moving all DHCP scope in external server.
After doing this workaround this mentioned users are still facing issue. I gone through some cisco document and some forums and came across that there is something to be done in " Session Timed Out " optionin WLC
which is default 1800 sec based on that I tried to capture debug outputs for mentioned above problematic clients and user who is working fine .
I gone through the same debug output and observed :
User who is working fine :
Processing Access-Accept for mobile 00:22:5f:8d:55:84
00:xx:xx:xx:xx:xx Setting re-auth timeout to 1800 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:8d:55:84 setting dot1x reauth timeout = 1800
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:8d:55:84 (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:1f:ca:2c:f3:01 to PMKID cache for station 00:22:5f:8d:55:84
New PMKID: (16)
The User / card which is having issue :
Processing Access-Accept for mobile 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Setting re-auth timeout to 0 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:90:a2:ac setting dot1x reauth timeout = 0
00:xx:xx:xx:xx:xx Stopping reauth timeout for 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:90:a2:ac (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:26:cb:1d:fe:31 to PMKID cache for station 00:22:5f:90:a2:ac
New PMKID: (16)
Please suggest me to do workaround.

Hi,
According to output of working as well as not working wireless cards ,
below is my observations :
Not working wireless cards observation :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client passed the L2 authentication and that, after successful association, it is now going into the DHCP_REQD state
Not-working wirelss card :
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 Stopping retransmission timer for mobile 0c:60:76:3e:8c:49
*Apr 06 11:58:15.869: 0c:60:76:3e:8c:49 10.10.232.137 Added NPU entry of type 1, dtlFlags 0x0
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.137 but after that , I am getting below output
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:ea:e0
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy WLAN LOCP EssIndex:2 aid:50 ssid:USTRI_SECURE
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Username LOCP :   U25744
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy IP LOCP: 0xa0ae889
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy CCX LOCP 4
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy MobilityData LOCP status:1, anchorip:0x0
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 Clearing Address 10.10.232.137 on mobile
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMmProcessDeleteMobile (apf_mm.c:522) Expiring Mobile!
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 0c:60:76:3e:8c:49 on AP 00:1f:ca:2c:ea:e0 from Associated to Disassociated.
working cards ouput :
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 10.10.232.190 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 Stopping retransmission timer for mobile 00:22:5f:8d:55:84
*Apr 06 12:16:28.042: 00:22:5f:8d:55:84 10.10.232.190 Added NPU entry of type 1, dtlFlags 0x0
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.190 and as expected , I am getting below output
*Apr 06 12:16:28.749: 00:22:5f:8d:55:84 DHCP received op BOOTREQUEST (1) (len 321, port 29, encap 0xec03)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP processing DHCP REQUEST (3)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   xid: 0x6eefbbb8 (1861204920), secs: 0, flags: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   chaddr: 00:22:5f:8d:55:84
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   ciaddr: 10.10.232.190, yiaddr: 0.0.0.0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*Apr 06 12:16:28.753: 00:22:5f:8d:55:84 DHCP successfully bridged packet to DS
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:f3:0
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy WLAN LOCP EssIndex:2 aid:10 ssid:USTRI_SECURE
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy Username LOCP : USTR\U17967
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy IP LOCP: 0xa0ae8be
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy CCX LOCP 4
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy MobilityData LOCP status:1, anchorip:0x0
Finally client is getting stuck with DHCP-REQD state ..................
Please look into this and put light on this ............

Just installed a new Airport Exteme. Set up was no problem however we have 3 IPads and 1 Mac laptop and cannot get all devices to access Internet. Every reset of the airport gives a different combination of devices allowed access. Any ideas as to why?

Just installed a new airpot extreme with a modem to use as a wireless system. Setup was successful however with 3 iPads and one laptop we cannot get all devices access to Internet. Each reset of airport extreme results in a different combination of devices that successfully connect. Any ideas as to why?

Well, this is interesting,
Let me tell you coulpe of things I noticed:
- Are you using LEAP as the EAP method? some config examples illustrate configuriong using LEAP with WEP keys. Forget this and use WPA2-AES.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
- in some AP configurations (AP1 for example) I can see that:
wlccp authentication-server client any method_Users
This means that the wlccp client authentication will use the method called method_Users. Let us see what is configured with this method:
aaa authentication login method_Users group Users
This shows us that the method method_Users uses the server group named Users.
let us see what is configured withe the group Users:
aaa group server radius Users
NOTHING!! it is empty!! so when a client tries to connect it will try to autheticate it against the radius server but the radius server group that it needs to check is empty.
so I think you need to either use the correct method under which the server is configured with the wlccp statement. OR you need to configure the method_Users with correct user group that contains a server.
Check and let me know if that works.
Regards,
Amjad

Broadband light blue, can get connection between d...

ADDED ADSL SETTINGS TO END OF THIS EMAIL
Please Help - getting desperate !!!
I have a BT Home Hub 3 and use wireless connectivity to communicate to the following devices -
MacBook Pro
Windows Laptop (used rarely)
iPad
Wireless printer
I intermittently experience a problem where, although my broadband light on the Home Hub was blue and I could get connection from my laptop/ipad to the Home Hub (i.e. on the MAC I can see the BT Home Hub on my Airport indicator and its a bona-fidae connection), there was no internet connectivity. This was an intermittent problem - some days I could surf fine, other days I couldn't get any internet connectivity. Also it is device agnostic - i.e. when the problem occurs it effects all my devices, when it is not evident all my devices work.
I went through the customer support helpline in september and the intermittent problem could not be solved. An engineer came out and replaced my Home Hub in September and things seemed to improve until December when the problem re-occurred and I was sent another new home Hub 3. This didn't solve the issue and at present I would say that 2 to 3 days a week I (randomly) get no internet connectivity.
Throughout the course of investigations several things have been tried with the customer support folks - these include -
Line checks - these confirmed broadband connectivity to the house was mostly fine
frequent resetting of the Home Hub
re-configuration of the Home Hub <-> device channel number. This was done several times and with different 'departments' in BT Support - e.g. once I got connected through to the 'MAC OS' folks who recommended use of channels 5,7 for Macs.
repositioning my devices to make them closer to the Home Hub (no difference as the home hub is very close to where I work in the house anyway)
switching on/off my Plasma TV!! (no difference)
on occasion these things have brought internet connectivity back on-line, but the intermittent problem invariably comes back.
This has become a real pain and its becoming impossible to do any planned work from my home office - any assistance greatly appreciated
ADSL SETTINGS AT the moment ---
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 01:10:50
Downstream:
7.813 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.4 dB / 29.0 dB
Line attenuation (Down/Up):
35.0 dB / 19.0 dB
Output power (Down/Up):
19.9 dBm / 12.7 dBm
FEC Events (Down/Up):
38825 / 0
CRC Events (Down/Up):
3 / 1

liammcquillan33 wrote:
Hi -
not sure why you have moved this into 'Wireless' - I'm not sure its a wireless problem. Can you move it back
You said
"I have a BT Home Hub 3 and use wireless connectivity to communicate to the following devices -"
There is nothing wrong with your ADSL connection statistics.
Try connecting to the home hub using an Ethernet cable to your computer.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Laptop slow to get connection

Similar Messages

Maybe you are looking for