Laptop slows down after about 6 hrs.
I have a Satellite M500-ST6444 with Windows 7, 64 bit.It is about 17 months old. After it is on about 6 hrs., windows live mail goes very slow, when switching between emails. And same for explorer 9. When try to open another program, it takes many minutes to load. The wheel (old hourglass) just keeps spinning. Fan is running at 64% and cpu temp is about 64%. It takes about 30 minutes to get it to shutdown. AAfter reboot, all is ok, for about 6 hrs. It started doing this about 3 weeks ago. Any ideas? Thanks, Howie
Satellite M500-ST6444
Let's make some tests after things slow down, Howie.
What happens when you boot into Safe Mode?
Start your computer in safe mode
Also, what happens when you boot normally into another account. If necessary, create one.
Create a user account
Don't discount the possibility that your hard drive is failing. Components going bad tend to malfunction when they warm up. That would account for the slowdown as reads and writes must be repeated. Keep your backups up to date.
-Jerry
Similar Messages
-
Lenovo 3000 N100 laptop shuts down after about 1 minute
Despite being plugged into AC power, my Lenovo 3000 N100 shuts down after about one minute. It boots properly but suddenly shuts down. I have not used this laptop much since purchasing it in 2006 and have seldom used it on battery power alone. Any suggestions before I buy a new battery? Maybe I am mistaken, but shouldn't the computer work on AC despite a depleted battery?
Hi Charleydog and welcome to the community,
Take the battery out and unplug the ac. Hold the power button down for about 15 seconds. Do it twice. Then plug only the ac in and see if it fires up.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Sattelite LAptop slow down after 1 sek blue screen
Hy Together sorry for my bad english.
This morning after working a little bit with word. a blue screen appeared fpr 1 sek an the Laptop crashes.
Now it is still starting windows but is too slow to work.
Need from start up to the first window screen nearly 15min. An it is not possible to work.
Now it works with Vista
In this way i wanted to install win vista with the recovery CD but in cant format Drive C. If i put the CD in i have only the possibility to start the normal windows. Can someone please give me some Ideas where I have to look. Perhaps something is damaged?
In which way can i clear the Drive C an reinstall Windows Vista?
Or is it possible to install Windows7? My Laptop has two Graphic Apapters an a Raid HDD System.
Thanks a lot
WingerHi and thanks for joining the HP forums. Please see the information at the link below for help resolving your issue:
http://www.laptopproblemfixed.com/laptop-shuts-off-when-ac-adapter-plugged-in/.
Thanks.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue. -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
System slow down after lion update 8/18/11
Has anyone else had a problem with their system slowing down after downloading the system update for Lion on 8/18? My system is not nearly as responsive and is only about two weeks old and have not installed any software other than Microsoft Office 2011 when I bought the machine. Any ideas?
Ok my system is booting and shutting down faster now.. This method worked for me:
First, I repaired the permissions:
1) Open up Disk Utility
2) Select your hard drive
3) Now select Repair Disk Permissions.
Then, I deleted the caches folder:
1) From the Finder's Go menu, select Go To Folder, and go to this folder: /Library
2) Delete everything inside the Caches folder (This might require the Admin Username & Password)
Finally, go to System Preferences and click on Startup Disc then click on your boot drive (In my case I've selected my HD labeled "Macintosh HD Mac OS X, 10.7.1". Now do a restart by clicking on the Restart button. If you don't have a Startup drive selected your mac will waste time at boot searching for a suitable boot drive !
I Hope this works for you as well.
Cheers! -
Laptop broke down after installing kernel 3.0
My laptop died little after installing kernel 3.0 (the "linux" package). Details:
- Laptop model: ASUS K50AB-SX029L, it was exactly 2 years minus 10 days old (based on the purchase date); specifictions here.
- using cpufreq frequency scaling (ondemand) and the catalyst drivers for video - if this is useful.
- the laptop used to get heated when the ventilation became obstructed by dust; however, the sensors worked, it used to instantly shut down when it was intensely used and too hot in the room.
- after I installed linux-3.0, I noticed some error message early at boot time, something about "soft restart" or "soft reboot" and something about "device" (not configured, maybe) - I don't remember well.
How it happened: I installed kernel 3.0 yesterday, rebooted, then built/installed the AUR ATI drivers (catalyst-utils, catalyst, lib32-catalyst-utils), rebooted again and then I left it building an AUR package. When I came back to it, the desktop was frozen, I forced a shutdown using the power button and since then, every time I turn it on, it gets powered, the fan is spinning and the USB external drive starts, but nothing else happen - no display, no boot, no spinning HDD. I removed its CMOS battery, but the same.
Now, since too many possible factors coincide - I installed kernel 3.0 for the first time, laptop was 2 y.o., it was used somehow intensely along the time, its warranty was just expiring - it is of concern to me what happened, if possible to find out. I mention that it was 2 years old because another laptop left me down before, after the exactly same period of using Linux (Arch for like 4 months on that one), different model and different brand (Acer). What is of interest:
- someone else's laptop breaking down coincided with updating to kernel 3.0?
- someone else's laptop broke down after 2 years or similar of using Linux/Arch daily? Any difference in reliability compared to using other OSs?
- any insight in the reliability/durability of the notebook hardware in general (things that may not depend on the OS)? I mean if it was supposed to die anyway after 2 years of usage - which sounds too short to me, btw - maybe it was just a big coincidence that it happened right after linux 3.0 was installed. But there is a need for some arguments supporting this hypothesis, while searching the web comes with a lot of irrelevant or contradictory information.
- if the case, how could the malfunctioning/misconfiguration of the OSs in general, Linux in particular, damage the hardware? I think overheating is out of question when the sensors work, but I'm open to information on this subject.
- what data (logs, etc) could be relevant and how should I analyze it, after retrieving it off the dead laptop HDD?MoonSwan wrote:Funny thing, my netbook's battery (an asus eeepc) pretty much died at exactly 1 year and 362 days old. Coincidence? I don't know.
Inxsible wrote:In my opinion, if you buy a laptop from the "Home and Home Office" section --- no matter what company, you most often get shitty computers that last all of 1 -2 years if you are lucky. My HP dv9000t mobo got fried exact 2 weeks after the warranty expired. Then fixing that, the wireless broke down, then the lcd got dead pixels. I think this is not a coincidence... Lenovo Thinkpad T series is what I went with after I gave up on the HP.
+1 on both. I had a kernel panic in my head this AM, too, but if you ask me it sounds suspiciously like a planned 2-year lifecycle on the products. Sack of middle fingers to the OEM retail products divisions.
Last night I had started compiling a kernel and was working on my thesis (which has nothing to do with computers besides using a word processor). Did a $ sudo pm-suspend and went to sleep when the machine finished compiling. This morning I'm at my desk with a multimeter and trying to find a local place that carries SATA to USB assembly.
BIOS won't come up, screen won't turn on, I'm definitely not getting to GRUB--pressing enter repeatedly and waiting does not lead to the hard disk thrashing at all. Yanked the battery, tested the adapter, cycled the power switch b/c I can't find the CMOS jumper and there's no repair manual for this thing. I realize I did leave a single USB fan and a USB light (turned off) plugged in during the suspend, but am having a hard time thinking that drawing power at USB spec (5V/100mA max) from USB could have done this especially with the A/C power source available. I'm not familiar with the actual suspend process, but a 5V rail is a 5V rail when it's got power, right?
I'm not going to start yanking individual components just yet, I actually want to get sh!t done today. The machine in question has a manufacture date of January 2009 stamped on the bottom.
Mfg Date: 2009/01/07
So two years, seven months and about three weeks of life. Even with a backup of mission-critical files from last week, this sucks--losing 60 hours of work is FTL. Fingers crossed that whatever zapped it didn't get to the disk. I'm still kinda shocked about all this. Get it? Shocked? Har har X-(
I'm not going to blame the 3.0 kernel though I was tempted. "But I didn't even install the new kernel... how can this be"? I thought maybe I blew up my processor or something by compiling, running libreoffice, VLC and firefox all at once... hardly. Bad timing on a new kernel, maybe, or I managed to piss off some DelHewlitSUSway god, or something. I've had battery/power issues on this machine almost since day one, but never any indication of impending doom.
I agree completely with the advice to get laptops from a "small business" or institutionally-oriented line, like Lenovo/IBM's Thinkpads, and even thought about Mac this morning, but don't have a trust fund. I'm writing this on a second-hand Thinkpad R series almost six years old. The LCD screen and/or cable are damaged, the disk spins at an underwhelming 4300 RPM or whatever and I have to keep the fan at max levels all the time but at least it f-cking boots up.
Sorry if this is a thread hijack, but if you can't get to BIOS you can't get to BIOS. After confirming it's not a video issue the only options are to yank all parts not necessary to booting up, clear the CMOS by finding the jumper or battery or trying to cycle power via the switch (for, like, 5 minutes), and reinstall parts one-by-one until replicating the issue. If you can't get that far, the mobo, BIOS or processor is probably nuked. -
Lightroom workflow slows down after modifying an image
Hi fellow users,
Lightroom 4.3 runs smoothly if I work on unmodified images.
However, if I apply modifications on an image, retouching it afterwards becomes much slower, even if I render a preview AFTER I made modifications on the image.
I tell you an example: I import a raw file to the program and I render it`s preview. Then I retouch the image - it works very fast, no waiting time, no Loading overlay.
Where the problem starts: I import a raw file, I apply some modifications on it (for example a preset), then I render it`s preview - then I want to do more modifications on the image, which becomes very slow.
I was monitoring the cpu usage of the computer. In the first case, the cpu usage during modifying the image is normal.
In the second case, it goes up to 100%.
It seems that applying modifications on an image makes working on it slow, no matter if you have the most up-to-date preview or not.
Anyone knows if it is normal or not?
Is there any solution to this?
Thanks,
Tamas
My configuration:
Windows 7 64 bit (up to date)
Lightroom 4.3 64 bit
Fast PC
lightroom settings:
camera raw cache: 20gb
video cache: 10gbFirst of all, you can forget about the preview rendering, that's irrelevant. Previews are only used by the Library module, not the Develop module. In Develop, it's handled by the ACR cache.
Now, as for slowing down after initial adjustments, that's a variable I haven't looked out for. But it could well be correct (it would explain some weird results I got across two machines recently).
In general, Lightroom 4 performs well below expected standards on some systems, while others fly along, and it seems nobody can explain why. Long story, do a search on this forum and you'll come up with several lengthy threads. The problem is that there are so many variables in this that it's almost impossible to even define what "slow" means. And now you've added another (interesting) one... -
Windows 8.1 gradually slows down after hours. Speed returns normal if restart "explorer.exe".
I have Windows 8.1 Pro (x64) installed on Alienware M17x. The slowdown mostly appears as slow response in the situation such as open a folder/window, open/close/switch tabs in IE, drag window, and there's also cursor lag. It gradually
slows down after system boot, noticeable after 3-4 hours, really slow after 8-9 hours.
I have thought about many possible processes which can cause this issue, and then I found out that it's caused by "explorer.exe". If I kill "explorer.exe", the speed suddenly becomes normal. Then, I restart explorer.exe
again, it stays normal, and then it still gradually slows down again after hours.
I have checked driver or software compatibility. Also, CPU usage and Disk usage is normal.
Please give some advises, reasoning, or solutions.SaccoSVD
The process that is causing the problem is called sidebar.exe and I am curious why it is running on a win 8 machine as I dont believe it is built in. (It seems to have over 22,000 instances launched so I suspect either malware or a broken app)
It is usually associated with a Vista machine, or updated win 7 machine. Did you do do a clean install? Have you run a malwarebytes scan?
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag -
Why do my loops slow down after many iterations
My Vi seems to freeze up or slow down after several iterations of the loop. This is an Analog Input Capture VI.
Attachments:
Final_Main_VI_with_working_amp.vi 456 KBFirst of all, thank you for your contribution. You are right to say that I have no need in changing the AI Config every time that the loop runs. But as this is supposed to be a soft-scope, I need to be able to update the parameters associated with AI Start while the loop is running (e.g. trigger level).
I have tried to move the AI Config subVI out of both loops but the error as a result is: "No transfer in progress for the specified source."
I also need a sampling rate of exactly 96kHz. I realize that the laptop clock cannot attain this value. Do you know how I could get exactly 96kHz.
Attachments:
Final_Main_VI_with_working_amp.vi 498 KB -
Server slows down after a while
Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.UNIXProcessForker.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
at java.lang.UNIXProcessReaper.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
at java.net.ServerSocket.implAccept(ServerSocket.java:243)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting on
monitor [0xbc5ff000..0xbc5ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting on
monitor [0xbc7ff000..0xbc7ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting on
monitor [0xbc9ff000..0xbc9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
at java.lang.Thread.sleep(Native Method)
at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnableThere are several threads like the one below. I would think that they are the
problem. But I don't know what they are doing - doesn't look like any application
code.
Mike
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38 nid=0x5a9f
runnable [0xbe3ff000..0xbe3ff8c0] at java.net.SocketInputStream.socketRead(Native
Method) at java.net.SocketInputStream.read(SocketInputStream.java:86) at weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
) at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24) at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
============================================================
Daniel Hoppe <[email protected]> wrote:
Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after
a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering
if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.UNIXProcessForker.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
at java.lang.UNIXProcessReaper.run(Native Method)
at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
at java.net.ServerSocket.implAccept(ServerSocket.java:243)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
at java.lang.Object.wait(Native Method)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting
on
monitor [0xbc5ff000..0xbc5ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting
on
monitor [0xbc7ff000..0xbc7ff8c0]
at java.lang.Object.wait(Native Method)
at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting
on
monitor [0xbc9ff000..0xbc9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
at java.lang.Thread.sleep(Native Method)
at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable -
Slow down after installing Lion OS
My Macbook pro later than 2009 model slowed down after installing the new OS Lion
any suggestions to speed it upFirst suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
http://www.apple.com/support/macbookpro
What you do not need is some gizmo to "speed up" or clean caches etc.
Maybe you need to make more room on your hard drive, or add more RAM.
For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
http://www.apple.com/support/lion -
Compleat system slow down after current updates
Has anyone learned why we all seem to have a compleat system slow down after the current set of updates? Everything works, but is VERY slow to respond. Even iTunes 7.1.1 plays video choppy now. Audio track plays fine however. Odd.
-Apple //GSFirst of all, try repairing your permissions with Applications> Utilities> Disk Utility. Select the hard drive you're running off of and then click the Repair Permissions button.
If that doesn't work I'd do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Then run the combo update(s) instead of the consecutive ones. That seems to be working for a lot of people, but it will probably take a while. -
System slow down after upgrade to 10.10.2
Still have a slow down after updating to 10.10.2
Tried everything I can think of.
Get spinning color wheel for a long time when opening even small files. Scrolling through folders, cursor hangs for a moment. opening and saving takes much longer.
Used HD repair and repaired permissions and diagnosed HD. No problems.
Looking at Activity Monitor, I don't see anything that stand out-
-CWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering. -
Has anyone noticed MacBook Air slowing down after installing Maverick
Has anyone noticed MacBook Air slowing down after installing Maverick?
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Maybe you are looking for
-
Problems recording real instruments
The other day, me and my band tried to record some songs. We recorded drums and then guitar. We then tried recording bass (by plugging straight into my computer) and it would keep cutting out. What I mean is that I would start recording, and then it
-
How do I get Facetime to connect on my Macbook Pro?
Hi guys, For some reason Facetime is not connecting to anyone anymore. I cannot receive incoming calls and when I dial out, it just rings and rings and other party will tell me that they are not getting anything from me. I've read the Facetime Troubl
-
External display, don´t connect after the upgrade to Lion?
I frequently use an external display when working. Now after the upgrade to Lion the mini dvi port seem to work. Signal goes though but no picture. Display works fine with my other Mac. Really need this to work. Pleas help me out and I´ll buy a new M
-
i have had my phone about 3 weeks. At first every time I plugged it into my imac iphoto would open and ask me to import pics from iphone. Now it no longer does that and every time i open iphoto, whether my phone is connected or not,iphoto asks me to
-
How settlement amt is calcuated in CO88 for process order in 2 currencies
Hi, How the settlement amount is calcuated in CO88 settlement accounting document in local currecny and group currency. When we are converting local currecny amount with exchange rate which has picked in BKPF Table from local to Group it is n