Laptop startup problem

Hello, I have a Compaq Presario CQ61-319WM and for some days now my computer won't start up. The usual "Q" logo on startup is gone and I don't even need to press the power button, it starts all by itself when I plug in the battery or power cable. When I do so, I can hear a fan and hard drive working, and the caps lock, power and wi fi(red) buttons are on. After a few moments though, everything stops and online the wifi button remains lit, with both red and blue leds on, creating a purpleish color. I tried hard reset but didn't work, can you help?

Hi,
Here are a couple of options you could try.
1. One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
2. Another option would be to remove the HDD, place it in an external caddy - an example is on the link below - connect this to another PC and see if you can access your files.
External HDD Caddy 2.5".
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Dropped Laptop - Startup Problem Now

Laptop took a two foot fall on the side. This has happened before over the course of four years, but this time its problematic.
At startup, chimes and black screen
There's power as the cap locks is green.
Tried reseating the memory
Tried zapping the PRAM (control + option + P + R) before and during the chimes
Tried resetting the PMU (power + control option shift) for five seconds
BUT
I can get it to boot up in firewire target mode and see the drive from another computer. Screen works and displays the firewire bouncing logo. I'm able to copy off any files that I need.
Anyone have any ideas on how to proceed??

Take it to an authorized service center for assessment.

MacBook pro when windows 7 has startup problem and Mac os doesn't work

I installed windows 7 on my MacBook pro and it did work well. But now windows has a startup problem and "startup repair" couldn't solve it, so I can't use both Mac os and windows and my laptop has become completely useless. Any suggestion?

Reboot and hold down command-R at the sound of the chime, that should take you to the Lion recovery partition, if it does go to disk utility and see if you have an OSX partition at all.

MSI GE6020E002 startup problem

I posted before regarding a startup problem where the laptop would not startup, the laptop would power up but the power button would blink orange and blue and the screen would stay blank, the laptop qould work after 2 minutes if the ethernet cable was unplugged. Now the laptop has the same issue except it does not turn on at all. The laptop battery does charge so its not a power issue. What can i do to fix this?

do this disconnect your battery and AC adapter and if you live within EU then you can break warranty sticker and then open back cover and find CMOS battery if you find it disconnect it then hold down power button for 30 seconds to 1 min and then re-connect the cmos battery and put back cover back on and put battery back and AC adapter and then try booting the laptop this shall power bios chip down fully and make it boot up from start again but it does not reset anything in bios i dont think.
Since some times it only requires bios chip to hang out completely to cause laptop from being unable to boot.

Intel SSD 530 startup problems on ThinkPad W520 - Bug in SSD or lack of BIOS support?

The are problems with Intel SSD 530 and ThinkPad W520. Many people, including me, are complaining about startup problems ... see this thread also: https://communities.intel.com/thread/44258
One month ago I bought an Intel SSD 530 240GB to replace the stock HDD of my ThinkPad W520 (4270CTO). When I cold-start the laptop everything is fine, but when I restart it from Windows 7 or even CTRL-ALT-DEL, the drive is not found. Both SSD and W520 has the latest firmware/BIOS.
I had no problems with Intel SSD 335 240GB; Windows starts and restart without problem, but with the Intel 530 it fails when I do restart, the BIOS does not find it after a normal reset. I think BIOS implementation for W520 does not support the newer ATA feature called "Device Initiated Power Management (DIPM) for Software Setting Preservation (SSP)". There is a BIOS update for W530 but not for W520.
Should I assume Intel SSD 530 is and will remain incompatible with ThinkPad W520 or wait for a BIOS update?
W520 | i7-2720QM | NV Quadro 2000M

I am also seeing the exact same issue. I have a ThinkPad W520 and a Corsair Force GS using a Sandforce 2200 series controller. According to the Intel SSD thread, there is some incompatibility between that controller and Intel QM77-chips which is causing the issue.
The symptoms for my laptop are the same. SSD is always recognized on cold boot, but effectively never on warm boot / restart. Will we get a BIOS update that fixes this?
I have dual boot configuration with both windows 8 and windows 7. The issue is happening regardless of what OS I issue the restart from.

I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status:

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html

Dual Monitor Startup Problem on MacPro - Solved

I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3. It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric keypad). This unit was supplied with Lion in December 2011 and has had a startup problem from the beginning as follows:
1 - when starting from a cold start the dual monitor positions are reversed from the correct position
2 - additionally the USB and firewire connected devices (e.g. Wacom tablet, 2 card readers) do not function properly.
The workaround for me has been to start the system, wait for the logon screen, then click restart. Upon restart everything comes up and functions correctly.
Specifics on my setup and starting problems:
1 - My main monitor (Monitor #2) is a large gamut monitor that is located to the right. This monitor is connected to card slot 1 as that is the faster card slot (pcx16). The second monitor (Monitor #1) is an ordinary unit and connected to card slot 2 (pcx4). The monitors are set up as an extended desktop.
2. The Wacom tablet (Intuous 3 wide) is connected to USB port on rear of machine. CF card reader by Delkin is connected to Firewire on rear of machine, and an SD card reader is connected to USB on the rear of the machine.
3. My dock is positioned on the left side of the left monitor. The menu bar is along the top of the left monitor, and all desktop icons are on the left monitor. The right monitor has no items on it.
On a typical cold start, as mentioned above, the apple logo appears on the right and then the logon screen appears on the right.
If I proceed to logon at that point, all the desktop items move to the right monitor and the computer thinks the positions are reversed. In other words, it behaves as though the right monitor (#2) is on the left of the desktop and left monitor (#1) is on the right.
Additionally, the Wacom tablet using either pen or mouse does not map over the full desktop range. If I use either card reader and then eject the card, no further card insertions will be recognized.
To fix this, I simply restart the machine thru the apple menu and everything comes up correctly.
I had discovered, that instead of completing the logon on a bad cold start, I could simply restart from the logon screen and all would work correctly.
On occasion, the logon screen would come up on the left monitor (as it should do) and in that case, if I log on all works correctly.
I have worked with Apple support on the phone, clearing setup ram etc. Have had the unit in to Apple store for hardware check, all OK. Next suggestion was reload OS and start over - no thanks.
SO - Here is the latest.
If I turn off my keyboard and mouse before starting the machine, then wait for the logon screen to appear - It starts correctly, with the logon screen on the left. I can then turn on my keyboard and mouse and all works as it should.
Bottom line - there appears to be a startup issue with Bluetooth devices from a cold start. Note that once the machine has been used for a bit, I can turn it off for short periods of time (e.g. 30 minutes) and it will start correctly even with the mouse and keyboard turned on.

mkaito wrote:
That's how dwm behaves. I believe dwm's multihead support is rather lackluster out of the box. You might want to check out some of the patches they have, and ask around in the dwm hackers thread.
I currently have dwm simply draw status on all monitors, but I'm investigating separate status bars per monitor. We'll see where that takes me. Dwm is a tinker's WM!
i found the patch , thanks!

My Desktop pc & mobile not play any video and in my laptop no problem

i'm using 30 version of firefox in my Laptop, Desktop & Mobile also but in my Desktop pc & mobile i'm unable to play any video and in my laptop no problem.
So if the prob. in my network so it will be not possible.
i think like earlier some time ago flashgot will stop working in firefox now this same mistake is accures again for video.
N yes i've updated my flash player, shockwave, java etc...

With the last Firefox upgrade, some plugins are no longer
enabled until you enable it.
Open the Add-ons Manager by
Pressing the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by; '''Tools > Add-ons.'''
Hot key; '''<Control> ''(Mac: <Command>)'' <Shift> A)'''
On the left side of the page, select Plugins.
BTW; At the top right is a link to check your plugins.

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?

What did you "put as slave?" What Mac model do you have, exactly?

Can anyone diagnose my startup problem from this screen pattern?

After failing to startup my Mac on about 8 consecutive attempts today, I finally got it to boot up, and now I'm afraid to turn it off for fear that I won't be able to re-boot.
Here's a photo of what kept happening:
http://www.doctorkeys.com/startup-problem-screen.html
This screen came up immediately, along with the spinning cog and the apple logo, both rather faint. But then those two disappeared, and all that was left was the gray screen with the pattern as shown in the photo. And that's as far as I got each time.
The display itself seems to be fine, because even when I couldn't use it with the Mac Pro, I was able to hook it up to my MacBook Pro and it worked fine.
Can anybody tell me what's happening?
Thanks,
Bruce Siegel
Message was edited by: Bruce Siegel

Hi-
To be honest, though, I was hoping that the pattern in the photo was so specific and common that someone would look at it and say, "Oh, of course! I've seen THAT one before. Do this and your problem is solved."
I have seen graphics cards produce that type of screen as a result of a few of situations.
One, if the card is miss seated.
One other is if a capacitor on the card has failed, while VRAM failure is another cause.
The first case is easy to fix; remove and reseat.
The second and third require replacement of the failed graphics card.
Cleaning the gold contacts with 99% isopropyl alcohol and thoroughly dusting the card while it is out is a good idea.
I have been able to replace a bad capacitor to restore a card, but luck was a big part of determining which one it was....

Startup problem with Lion OS 10.7.3

Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
Any thoughts? Thanks -

Thanks -
I've reinstalled the OS today and am back up and running.
But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X.

Httpd startup problem

iAS 9i on Sun Solaris
Oracle 8i (8.1.6) on W2000
http port = 7777
After installing iAS 9i on Sun Solaris, i get startup problem with Apache http:
'Syntax error on line 14 of /export/home/ias/isuites/Apache/Apache/conf/mod__ose.conf: AuroraService - directive already in effect for this server'
'httpd could not be started'
After disabling the 'AuroraService inst1_http' in mod__ose.conf file, the Apache http did startup without any problem.
But unfortunedly i can't open http://<host>:7777/pls/portal30.
Any help will do...
null

Thanx Mukul,
You're right, mod__ose.conf appears twice in oracle_apache.conf.
Apache http started now.
But still i can't start the page:
http://myhostname:7777/pls/portal30
The DAD for portal30 is configured with Oracle username: portal30
Oracle password: portal30
connect string: tml000 (is the same as in portal30_sso and is defined in tnsnames.ora)
error message:Internal Server Error
Instead the page http://myhostname:7777/pls/portal30_sso is starting well.
These messages are in error_log: Exception in thread "main" java.lang.NullPointerException
at org.apache.jserv.JServServletManager.load_init(JServServletManager.java:526)
at
org.apache.jserv.JServServletManager.loadServlet(JServServletManager.java:488)
at
org.apache.jserv.JServServletManager.loadStartupServlets(Compiled Code)
at
org.apache.jserv.JServServletManager.init(Compiled Code)
at
org.apache.jserv.JServServletManager.start(Compiled Code)
at
org.apache.jserv.JServServletManager.main(Compiled Code)
Please help.....
null

Startup problems--time for a new machine?

I have an imac G5 that I bought last February. In the last few weeks I've been experiencing serious startup problems. When turned on, the screen goes gray and the lines and pixels fragment and shimmer. It takes a long time to go to the main screen and often the screen isn't stable and freezes. It takes me eight to ten startups to get the system stable.
I've repaired disk permissions, repaired h-drive, reset Pram. Still a mess. My husband wants me to just get a new one and get something that is not an Apple this time. I'm resisting that.
I don't want to lose all my data and I've backed up what I can but I'm worried the data is corrupted and if I load it on to a new machine, I will experience the same problems.
Any advice? I'm not even sure if this is a hardware or software problem. I'm out of warranty so I am on my own, but I'm frustrated to be having these problems with such a new machine.
Thanks for any advice,
Cassandra
iMac G5 Mac OS X (10.4.6)

Cassandra, in addition to Barbara's excellent suggestion: looking to see if you qualify for the program, please make sure that you have an external FireWire drive and clone your drive, (SuperDuper is an excellent choice for backing up, cloning and making scehduled backups).
Let us know how you made out,
Miriam
Rev A 20" iMac G5, 15"iMac G4, 15"iMac G3 DVD Mac OS X (10.4.6)

Startup problems w/ Power Mac G4 (QuickSilver 2002) M8667LL (dual 1 GHz)?

Startup problems w/ Power Mac G4 (QuickSilver 2002) M8667LL (dual 1 GHz)
Starts up with bong and then a long wait then screen comes on with old time smiley Mac and spinning beach ball then another long wait and then OS X loading bar and then a panic screen. Subsequent start, bong, and then hard drive spins for 6 or 7 minutes, then hard drive stops and then nothing. Could this be symptomatic of a hard drive failure?
Thanks very much.

I am pleased to report that I think the problem has been solved. Apparently the strange behavior can be attributed to overheating. After some on line research and the help of people on this list I opened the case and found that the logic board fan was clogged full of lint and dust. After cleaning it I discovered that the fan is inoperable. The computer is now operating with the case open and a small electric fan directed at the logic board heat sink. The computer has been operating flawlessly now for several hours. Will have to replace the bad cooling fan and clean the computer regularly. Thanks so much to all of the people who have responded to my request for help. Would like to mention that a firm with a canine connection charged me over a hundred dollars to report that their diagnosis is a faulty logic board.
Thank you.

Laptop startup problem

Similar Messages

Maybe you are looking for