Laptop taking really long time to restart after battery drain

Last night I had a weird experience with my mid-2011 MacBook Pro; I went out to dinner and came back to find the cat had kicked the power cord out, draining the battery. I've had this happen before and wasn't too worried; it's always just restarted after I plugged it back in. This time, however, I plugged it in (getting, perplexingly, a green light on the cord) and nothing happened except for the sleep light slowly flashing; it didn't respond to any pressing on the power button, and the sleep light disappeared if I unplugged the cord. The battery test button on the side got one flashing light (meaning, I believe, a dead battery), which also didn't work if the computer was unplugged.
I left it plugged in while I hunted for info on the problem and about an hour later had just decided that I was going to have to take it in to the Genius Bar when it suddenly booted up. The cord light turned orange and it proceeded to fully recharge over the next two hours.
Is this normal behavior after a battery drain? Should I be concerned? Is it worth taking the computer in to get the battery checked, or some other element of the comp? (some of the things I looked at were talking about the logic board, which is not a happy thought)
iStat Pro claims the battery is at 41% health, 111 cycles, which I would think would mean it has some life in it yet.
Anyway, I'd appreciate any advice anyone can offer.
Thanks!

Battery Health: 41%
It is better to get it checked at Apple Store.
If Extended AppleCare is not purchased, Mac is under limited warranty for 1 year
from the date of purchase.
Make use of that warranty.
Best.

Similar Messages

  • External hard drive taking really long time to reformat

    I'm reformatting a Seagate 2TB external hard drive that connects using USB 3.0 to my 2014 Macbook Pro (OS X 10.9.4).
    For some idiotic reason (because I had never used it before and wanted to see what happened), when I went to reformat the drive in Disk Utility from FAT32 into 'Mac OS Journaled (Extended)' I selected the option for "7 Pass Secure Erase".  It initially told me it should take "1 day, 7 hours", which seemed like a lot but was consistent with what other Support Communities people have said for such a large drive.
    It's now been reformatting for 20 hours, and the estimated time remaining says "1 day, 1 hour".  The progress bar has moved and it says it's on pass #3, but this seems like it's taking an abnormally long time.  Has something gone wrong?  For reference, I did a 1-pass into reformat into FAT32 on a similar 1TB external and it only took me around 20 minutes (so I estimated the new one would take ~5 hours (20 * ~2X storage space, 7 passes). I know "estimated time" on a computer always defies the laws of mathematics, but if "6 hours" is actually 20 hours, will I really be waiting for another 80 hours?  Can I do anything to speed this up?
    More importantly, can I stop the reformat and try it a gain with 1-pass, now that I've initiated the idiot way of doing it?  I don't want to screw the drive up or make it unreadable, it's brand new, but I don't want to have to leave my laptop on for the next 3 and a half days.
    Please help!  Thanks so much!

    SquareWarren wrote:
    I'm reformatting a Seagate 2TB external hard drive that connects using USB 3.0...
    ...I know "estimated time" on a computer always defies the laws of mathematics, but if "6 hours" is actually 20 hours, will I really be waiting for another 80 hours?  Can I do anything to speed this up?...
    I don't know which Seagate external you're using but my experience with a number of GoFlex externals has been that very little thought was given to ventilation, and, as a result, the drives tended to overheat. Watching the transfer rate using Activity Monitor during normal backup use, I found that after running a while and getting hot, the transfer rate went from MB's to KB's/sec. You're not actually transferring anything but the drive is being written to, so I'd expect the write speed to drop and what is already going to be a long process will just get longer. Sorry.

  • AME Taking Really Long Time To Open Encoding Settings

    With the release of the 2014 versions of AME, I have experienced really long wait times when opening the encoding settings for a job. For example, if I add a 1920x1080 image sequence to the encoder, pick Quicktime as the container and any of the available codecs, clicking on the codec name to open it's settings causes a really long delay, maybe 3 minutes, before the settings dialog will open. I am using a Macbook Pro with Yosemite. Previous versions before 2014 version never had this issue. Is this a known issue?
    thx

    This is a known issue with running AME on Yosemite. We are working with Apple on the issue and hope it will be fixed in an upcoming OS update.

  • Mail taking REALLY long time to REPLY.

    Hi, whenever I REPLY to an e-mail it seems to take ages before the message will appear.
    Ie, I'm reading a message, hit reply and then I have to wait thirty seconds before it finally brings up the new message with the old one attached.
    I can understand in large e-mails where there may be lots of graphics etc, but most of the time I receive plain text e-mails (free from all html) and it seems to take forever.
    Does anyone know a way in which I might be able to "reset mail" like you can reset SAFARI, without loosing my e-mails and accounts. (sounds a bit stupid.)
    TIA for any help.
    Dan Walters
    danielwaters(at)mac.com

    Hi Dan.
    How many accounts do you have and what type are they (POP, IMAP, .Mac)?
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
    Try disabling Search .Mac For Certificates in Keychain Access > Preferences if it’s enabled. Take a look at the following articles for an explanation of why this could be the problem:
    http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
    http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither/

  • IPhone 6 Plus keeps restarting after battery drain

    Hello.
    I recently was talking with FaceTime with my iPhone 6 Plus charging (the battery was very low). I unplugged it for a few seconds so I could connect it to my Mac, but it shutted down. Now it keeps doing the same thing:
    -Boot up
    -Shut down
    -Show battery icon with red
    And it repeats.
    Well, it didn't start doing this long ago, only a few minutes. What should I do? Leave it for a few hours or do something? Please help quick!
    Info:
    iPhone 6 Plus with iOS 8.1.1 with 16 GB memory
    By the way, when I unplug it, it will stop doing it.

    Did you ever find a solution? My battery on my 6 Plus drained all the way down. Phone wouldn't turn on. Put it on charger that it normally charges with and get:
    1.) Battery with slight red indicator
    2.) Phone restarts
    3.) Gets all the way to my home start up screen then turns off
    4.) Cycle and repeat
    I can't get past that and it doesn't seem to be charging (has been over an hour). Just a never ending cycle of rebooting. I have tried
    1.) Using different cables and outlets/charger bricks
    2.) Holding on/off and home button to try to force restart
    Nothing works.

  • HP Laptop takes a long time to load home screen

    Last Night, I decided to update my laptop because I looked at my updates and I did what I was supposed to. It was taking a long time to restart, so I shut it off and turned it back on. My laptop said it was installing updates, so when it finished updating.  I turned if on, and it went to the Hp screen where it started loading, once that screen went away the laptop went to a black screeen, and it stayed like that for about 5-10 minutes. So I turned it off and turned it back on about five or six times when I decided to press the B and windows keys, so my laptop did a bios test. Once that finished, It went straight to the HP logo, and then it just went to a black screen. I dont know if it did this because I restarted my laptop way too many times last night, or because I decided to update the laptop. Help! 

    Please check your sqlnet.ora.
    Please try this:
    SQLNET.AUTHENTICATION_SERVICES= (NONE)
    NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME, LDAP, ONAMES)
    take care that first directory path is set to tnsnames.

  • After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?

    After the last iOS 7.1 update my phone is taking a really long time to receive and send pictures over messaging. Is there a fix?

    iMessages or MMS?
    MMS and SMS are exchanged over a carrier's cellular network only. Contact your carrier regarding a problem with MMS/SMS.

  • So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • PC taking a LONG time to load everything before the win logo, after BIOS update.

    Every single time I turn on my PC, it takes a REALLY long time to start the first DOS-like screen and then it takes another while before the windows logo shows up. About 4-5 mins before the win logo. It used to be fast and sweet before updating my MSI MB BIOS...
    It all started when I updated the BIOS the first time (I just thought it was something good to do). The start up took a long time like 25% of the times and it got worse every month. I tried changing the config in the BIOS but nothing helped, so recently I decided to update the BIOS again with a flash drive step by step as indicated in the MSI website with their software, only to find out that the problem got worse and that it happened 100% of the times I turn my PC on.
    When the start-up is slow, it gets stuck in that black pre-DOS like screen, showing a "B4" in the bottom right corner. After that the usual first screen with some info shows up for about 3 seconds, then it all goes black again and shows some other pair of codes on the same corner (B2, A4,....)
    Today I tried manuallly reseting the MB to see if it helped (I removed the battey for a while, then used the reset CMOS button to make sure). It did not help at all. I have tried changing the hard drives from IDE to AHCI but windows 8 won't start: after showing its logo for a while, it shows a blue screen of death with the sad smily :( and tries to reset (I have to manually reset it afterwards). I have one 2TB WD green hard drive and one SSD in which I have windows 8 installed.
    I found some text today on the MB MSI website on the BIOS versions page... which I didn't see at the time, and it shows up only in my smartphone: "We recommend to only update to the M8 class module if you have an Ivy bridge processor. There is no way to go back to the previous M module after the update" (this is from memory by the way)
    Something to add, I used the Crystal Disk Info software to check my drives and it showed the were in good condition. Then used CrystalDiskMark 3.0.3 to test them and got low numbers in my opinion; for the WD green
       Sequential Read : 76 MB/s, Random Read 512KB : 26 MB/s, Random Write 512KB : 41 MB/s.
    And for the SSD
       Sequential Read : 167 MB/s, Random Read 512KB : 161 MB/s, Random Write 512KB : 111 MB/s
    My relevant PC parts are:
    Intel i5 2500k (sandy bridge)
    MSI Z68A GD65 (B3)
    SSD Mushkin Chronos 120GB SATA 6GB-s (windows 8.1 installed here) (MKNSSDCR120GB)
    2TB Western Digital HD (WD20EARS)
    2x Ati 6950 crossfire
    I also already tried turning it ON with everything disconnected, changing the video card slots, using only one... etc.
    Any ideas on how to fix this or what's causing it? I really need some help here...  If you need more info, I will be checking this constantly and will deliver your requests.

    Quote from: dan.djh on 30-November-14, 23:06:20
    I already fixed the IDE to AHCI problem, which was the minor one. Solution for this: Use regedit to change HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\"Error Control" to 0 and delete StartOverride. Then you should be able to go into BIOS and change to AHCI mode. You'll need to do this again if you ever start up in IDE mode.
    But I still need to fix the main one which is the slow startup... please help!
    B4 is a USB problem! what USB devices do you have plugged in? (if its a keyboard and/or Mouse please say what they are like make and model!)

  • EHP4 ACT_UPG phase taking a really long time

    I'm still working on the EHP4 installation and for some reason the ACT_UPG phase in Step 5 - Pre-Processing, is taking a really long time, currently 7 hours and counting.  This phase apparently "Activates ABAP Dictionary Customer Objects".  I didn't think we had that many (relatively), in our system.
    Just wondering how long this phase took for those of you who have gone through implementing EHP4?  I'm running SQL 2005 on W2K3 all 64-bit on fairly decent hardware.
    Thanks!
    Tom

    Hi,
    Usuall Preprocessing phase takes very long time...
    But there are few steps which can increase the performence,...
    1) Depends upon how many parallel R3trans processes you have taken during configuration phase...
    2) Also, you can increase performence by changing some memory parameter in shadow system...For this run RSMEMORY program in SE38 then it will show you some parameter you can increase the moemory according to your hardware...
    3) Also, it will be good if you increase parameter db_cache_size in your database....
    Hope it helps
    Thanks
    Sunny

  • Hyperion Financial reports-taking long time to open after migrating to 9

    Hi,
    Financial reports version 7 are migrated to system 9.
    Problem that we are facing now is that reports take ling time to open.
    Can anyone suggest how to improve the performance .
    before migration to system 9 financial reports was working fine but now it is taking a long time to open

    Are they taking a long time to open in the studio or in the workspace?
    There could be lots of reasons:
    Have there been server changes with the migration?
    Have there been any changes in dynamically calculated dimensions?

  • Hyperion Planning Web URL is taking Too long time to respond

    Hi,
    When Users are accessing Hyperion Planning URL web link its taking too long time to respond.We restarted the services after these for 2 hours it works fine after that again same issue.Please advise.

    Hi John,
    Follwing is the Log noted: when URL is slow:
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
    [8/15/12 10:17:21:204 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
    [8/15/12 10:17:21:220 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.HspRuntimeException: There was an error during the save process.
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1478)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:133)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:457)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:515)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:300)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
    [8/15/12 10:17:21:236 GMT+08:00] 00000019 SystemErr R      at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1551)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R com.hyperion.planning.olap.EssbaseException: ESSG_ERR_OPERATIONFAILED (1100027)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseGridAPI.HspSaveGrid(Native Method)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssGConnection.hspSaveGrid(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.loadOrSaveForm(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.olap.HspEssbaseJniOlap.saveForm(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.db.HspFMDBImpl.saveFormGrid(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.SaveFormGrid(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.hyperion.planning.HyperionPlanningBean.Save(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at HspEnterData.Handle(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at HspEnterData.doPost(Unknown Source)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1213)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:658)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:526)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    [8/15/12 10:17:21:251 GMT+08:00] 00000019 SystemErr R      at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:764)

  • Photoshop CS3 Taking a Long Time to Open

    This is a message for anyone whose Photoshop CS3 is taking a really, really long time (2 or 3 minutes) to load, and gets stuck on reading the Preferences.
    YES, I DID try trashing my Preference file, and letting Photoshop rebuild it. But that did not work. It still got hung up on loading Photoshop.
    What I found was that, somehow (and I'm still not sure how), I had many, many, many duplicate Tool Presets for all of my tools. They were duplicates of the default Tool Presets. In some cases, there were 50 or 60 duplicate Tool Presets for certain tools (i.e. Crop 8x10).
    I used the Preset Manager to DELETE all of the duplicate Tool Presets. I did not just trash all the presets, because I wasn't sure which ones were custom presets that I had set up, and I wasn't sure if I had saved all my custom ones.
    After deleting all of the duplicate Tool Presets, Photoshop CS3 now takes SECONDS to open. It's opens very quickly.
    Hope this helps someone out there.
    Dave.

    MacBook (13-inch Early 2009), Mac OS X (10.7.3)
    My macbook has become very slow
    have about a third of my disk storage free
    The startup disk may need repairing.
    Use Lion Recovery  to repair the startup disk or reinstall the Mac OS X.

  • I just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm

    i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Rank Function taking a long time to execute in SAP HANA

    Hi All,
    I have a couple of reports with rank function which is timing out/ or taking a really long time to execute, Is there any way to get the result in less time when rank functions are involved?
    the following is a sample of how the Query looks,
    SQL 1:
    select      a.column1,
                    b.column1,
                    rank () over(partition by a.column1 order by sum(b.column2) asc)
    from         "_SYS_BIC"."Analyticview1"         b
                    join          "Table1"            a
                      on          (a.column2 = b.column3)
    group by  a.column1,
    b.column1;
    SQL 2:
    select    a.column1,
                    b.column1,
                    rank () over( order by min(b.column1) asc) WJXBFS1
    from         "_SYS_BIC"."Analytic view2"         b
                    cross join                "Table 2"               a
    where      (a.column2  like '%a%'
    and b.column1  between 100 and 200)
    group by  a.column1,
                    b.column1
    when I visualize the execution plan,the rank function is the one taking up a longer time frame. so I executed the same SQL without the rank() or partition or order by(only with Sum() in SQL1 and Min() in SQL 2) even that took a around an hour to get the result.
    1.Does anyone have an any idea to make these queries to execute faster?
    2. Does the latency have anything to do with the rank function or could it be size of the result set?
    3. is there any workaround to implement these rank function/partition inside the Analytic view itself? if yes, will this make it give the result faster?
    Thank you for your help!!
    -Gayathri

    Krishna,
    I tried both of them, Graphical and CE function,
    It is also taking a long time to execute
    Graphical view giving me the following error after 2 hr and 36 minutes
    Could not execute 'SELECT ORDER_ID,ITEM_ID,RANK from "_SYS_BIC"."EMMAPERF/ORDER_FACT_HANA_CV" group by ...' in 2:36:23.411 hours .
    SAP DBTech JDBC: [2048]: column store error: search table error:  [2620] executor: plan operation failed
    CE function - I aborted after 40 mins
    Do you know the syntax to declare local variable to use in CE function?

Maybe you are looking for

  • Custom delta extractor: All data deleted in source table in R/3

    Hi everyone, I have made a custom delta extractor from R/3 to a BW system. The setup is the following: The source table in R/3 holds a timestamp, which is used for the delta. The data is afterwards loaded to a DSO in the BW system. The extractor work

  • I cannot update anything on my imac

    Everytime I push "Software Update" in the top left hand corner, I get the mesage: "Software Update cant check for updates because of a network problem. Software cannot connect to the update server." I run through the diagnostics and it comes out sayi

  • Load External URL in Container

    I want to have a page with my menu that pulls external urls and places it within some type of container on the same page. Is this possible? Every tut or example on the web that I seem to find can load urls either in a _blank or _top using the navigat

  • AOL AIM and iChat

    HI, My AIM does not work all the time.. sometimes it lets me in and most of the time it either closes the application abruptly saying that it has unexpectedly closed. After the error message, if I try to sign on again it keeps trying to sign me on un

  • Need to Upgrade phones for work No Upgrade for 15 months

    Is it possible to add two lines to my family plan, get the promotional phones and then activate the promotional phones on the main line and second line? How long would i Have to keep those two new lines activated? Any other suggestions?