Laptop turns on, shuts back off within 3 seconds and does not POST.

I aqquired a laptop that need some parts installed on it, nothing to major once i got everything installed the pc turns on for a couple seconds then turns off. The battery indicator status shows that its getting power and being charged and the "plugged in" status indicator on front is also lit up.
Its the M45-S265.
If anyone has the slightest thought as to what the problem is feel free to chime in thanks!!

Thank you for using the Toshiba Laptop Forums. Since there have been no posts to this thread in several days, it is being marked "read only" as part of our routine message board maintenance.
If you still need assistance, please feel free to post a new message or contact the Toshiba Customer Support Center at 1-800-457-7777.
Chico

Similar Messages

  • My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

    My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

    Return it for a warranty replacement.

  • My iPad keeps shutting itself off during use.  It does not matter is the battery is 100% charged or not.  Anyone have any ideas as to why this is happening?

    My iPad keeps shutting itself off during use.  It does not matter if the battery is 100% charged or not.  Anyone have any reason this could be happening?

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • IPhone 4 shuts off randomly, will only turn on after hard boot, then shuts back off within 10 minutes

    My iphone 4 just had its 30 pin port replaced and also i believe the battery was just replaced. It will only turn on with a hard start (Holding the wake/sleep + Home) then within the next 10 minutes it shuts back off. I have been trying to recovery mode restore it and it keeps having the problem. I am about to finish another recovery restore. Ill update if this fixes it.

    Whoever replaced the port and the battery made an unauthorized repair, as Apple never replaces parts (except for the battery). Whoever did it broke your phone. Take it back to them, as Apple will no longer touch it.

  • IMac turns off by it self and does not want to turns on later, do i have to feel the fan at the back?

    1.- The imac turned off by it self.
    2.- I tried to turned on pressing the turn on/off button and it did not do anything.
    3.- I disconected the computer form the wall and wait for some minutes, and it did no do anything.
    4.- After about 20 minutes i tried again and turned on by pessing the on and off button.
    5.- The imac turned off again and disconected form the wall and conected to another electrical contact at the wall, adn it did not turned on.  i wait for some minutes and turned on again, but after about five minutes it turned off again.
    6.- I left the imac connected to the wall for a couple hours and i tried to turned onn by pessing the on/off button and it did not turned on.
    7.- I left all night connected form the wall and tried to turn it on this morning and it did not turn on.
    8.- This time, I only disconnected the imac cord form the back of the computer and left it for a couple of hours, then I concected and turned on
    9.- All the times that the computer turned on it started like a restart and no announce or windows appear telling me about an error or something like that.
    10.- One of the times I touched the computer at the back and felt it hot, not too hot, but I do not how normal is.
    11.- I can feel some very, very little air at the back form the vent.
    What do I hve to do?
    What kind of tests can I do to know if the computer's an is working ok?

    Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

    I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button.  I also realized that the upper portion of the volume key does not seem to work properly.  Any solutions?

    i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
    what should i do, i dun like going to the store in exchange for a refurb one

  • Sometimes my back button is greyed out and does not show the previous page i was just looking at!?

    This randomly happens and i can not tell exactly what i do or why.
    All i know is that every time you visit a page,site, picture etc... the back button remembers every page you have just been too in that session.
    However some times the back button goes grey and i can not click on it and it loses all the previous pages i have been to.
    I can reopen the last pages by going to my history but it's really annoying as it takes time and as i surf and look at a lot of things, the back button is crucial for me.

    I am experiencing the same problem with the back button randomly being greyed out and not functional. If I navigate to the same page a second time, the back button is usually functional again... have not been able to associate this behavior with any particular site

  • When I turn it on it is slow to startup and does not ask for my password.

    Snow Leopard 10.6.8
    Macbook late 2008
    So I turn it on and it takes a couple minutes to start up, it takes a while before gettign past the grey screen to the apple loading screen and then just goes straight to the desktop.
    I just erased the drive 2 months ago and put on the OS, I have used it maybe 3 times since then.

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.

  • Playbook shut down and does not power on anymore

    My playbook shut down while reading an email and does not power on anymore. Any idea how to fix this?

    Try holding power for 20seconds. This will do a hard reboot ofthe device. It's was also mentioned that sometimes leaving it plugged in for awhile can help.
    - If you like my response/post, or it helped you find an answer you were looking for, please provide a Kudo - white star to the bottom right of this post. -
    - Please use the search bar at the top, or check out the PlayBook FAQ's for help getting started -
    - Hockey DrillBook -

  • Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

    Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

    It could have powered off. Try holding the sleep button down for a few seconds until the apple logo appears to restart it

  • Phone shutting off when not using and does not start back up by itself

    I bought the LG Revolution phone 2 1/2 weeks ago and since then twice when I have not been using it, it shuts off by itself and does not power back up until I realize it is off and then I hold down the power key to restart it. It also turns off in the middle of using an app but then restarts itself. Is this a known glitch or is something wrong with this particular phone? Since I am after the 2 week mark, can I exchange it? Or am I out $200 for an issue that isn't my fault?

    tiggerpolo81, I know your phone shutting off and on is very frustrating. I will attempt to assist you with some suggestions to resolve this issue. I researched this issue and found that some customers have reported this as an issue and we have also reported it to our device team. We will attempt to address the issue with any future updates for this phone. In the mean time, I recommend checking to see if a third party app is causing the issue. 
    Safe Mode temporarily disables all applications that have been installed via the Android Market. Performing this step is necessary to determine whether a 3rd party application is the cause of an Operating System / Application issue. 
    Enable Safe Mode
    With the device powered down, press and hold the power button (upper-right corner).
    When the LG Logo screen appears, press and hold the volume down key.
    Release the volume down key when Safe mode is displayed at the lower-left.
    This may take up to 30 seconds.
    Disable Safe Mode
    Press and hold the Power button (upper-right corner).
    Select Restart.
    Additionally , if the issue continues we can review your account and device for warranty replacement options. If the phone is within its one-year manufacturers warranty and have no physical or water damage, it can be replaced with the same model. 

  • My iphone 3gs suddenly turned off and does not want to turn back on.

    My iphone 3gs all of sudden turned off and does not want to turn back on.

    Charge it with a wall charger for 15 minutes, then hold the HOME and SLEEP buttons until an Apple logo appears, about 10 seconds.

  • Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

    My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

    take a look at this topic, maybe will help:
    http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

  • 10.9.1 installs, then system turns off and does not restart.

    10.9.1 installs, then system turns off and does not restart. When I eventually turn it back on, it installs again, then turns off.. Endless Cycle.. I have booted to restore disk, found errors that needed to be repaired and tried to repair them but system told me, after a few minutes, its not possible to repair. When I restart back to main disk, it shows the install AGAIN and then turns off.  Much appreciate any Ideas?

    All I can tell you is that:
    Antivirus software, aside from being next to useless on Macs, is a common source of problems with Mavericks.
    Google Drive was incompatible with Mavericks last time I looked.
    WD hard drives have software that comes on the drives that is incompatible with Mavericks, software that comes with the drives that they want you to install on your mac which is incompatible with Mavericks, and in some cases firmware in the hardware of the drive enclosure itself which is incompatible with Mavericks. And all of this software is completely unnecessary. The good folks at WD have really worked hard to ensure that their products won't work with Mavericks. Bless their little pointy corporate heads. I'll bet that's the last WD drive you'll buy.
    Basically you would need to get all this stuff uninstalled from your hard drive before it will reliably work with Mavericks. But even then, it might not work, because old/bad/incompatible software can alter your OS and the kernel such that uninstalling it won't help- the OS/kernel may be damaged such that you have no alternatives other than to erase the HD and start over. And anyway, currently you can't boot your HD to be able to access the Finder so unless you're going to spend a weekend with the Terminal you won't be able to uninstall that stuff in the first place. If I were you I'd just go ahead and erase the HD and install Mavericks from scratch.
    10.9.1 doesn't come on a CD. If you had another (working) mac you could make a bootable installer flash drive with DiskMaker X and an 8 GB key drive DiskMaker X (formerly Lion DiskMaker) , but then you'd still have the same problem, the incompatible software would still be on your HD, unless you erase it first before you try installing Mavericks again. So there's really nothing to gain by having the Mavericks installer on a disk.
    If you have a third party utility like Techtool Pro 7 you might be able to boot from the TechTool disk and repair your HD enough for it to boot.
    Message was edited by: arthur

  • Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Hello QuinnDev,
    Thank you for posting in the Apple Support Communities.  It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on.  I found an article that talks about closed clamshell mode.  You would have to fulfill the following requirements to use your display this way:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    You can find all the steps and the full article here:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/HT3131
    I hope this helps!
    All the best,
    Sheila M.

Maybe you are looking for

  • Can not set up Web Service datastore using HTTPS WSDL DS 4.1

    I have been trying to configure a Web services data store to connect to an HTTPS Wsdl file Here is some background. DS Version: 14.1.1.210 Job Server Windows 2008 if i configure the datastore and leave the field for Keystore path empty, i get the fol

  • Please reply to this query asap

    Create a matrix query to display the job,salary for that job based on department number and the total salary for that job for all departments,giving each column an app: heading JOB DEPTNO(10) 20 30 SUM(SAL) ANALYST 0 100 0 100 SALARY AND JOB AND DEPT

  • Interesting ACE URL Header & Load-balance & SSL on 2 VIPs

    Hi There I have an interesting situation that I am trying to solve. I have 4 websites, each one with SSL Off-Loading on the ACE on the outside. All FOUR websites run on a single server on the inside, but each website is using a different port number

  • How to Use and Filter Table contents after execution of Bapi

    Can anybody guide me how to Use and Filter the table Contents which i got after successful execution of a Bapi I used Component Controller in my Project Ex: My table contains Redundant data for a single column but i want to display the column content

  • Command history in SQLplus

    Hello, How I can get sql command histyory in sqlplus. I am using Oracle 9i version 2 on Red Hat 9. Thank you in advance.