Laptop unable to boot up

Laptop model: 3000 N100 0689 - D8A
During the initial startup screen upon booting up: "To interrup normal start up, press the Lenovo care button". Hanged at this screen for more than 2 minutes.
Some steps tried: 
(1)
Upon Booting up, hit the Esc key show all the stuff on the Bios version, processors, RAM, HDD serial no, till "Mouse Initialized"
Try hitting F1 to enter set up but it just shows "Entering setup ... " afterwhich sentence disappear and nothing happens..
(2)
Remove SATA HDD, boot up, hit the Esc key.
Shows:
Invalid project ID!!! BIOS version ????
(the rest of the processors, RAM and etc details...)
Try hitting F1 to enter set up but it just shows "Entering setup ... " afterwhich sentence disappear and nothing happens..
(3)
Try running a Linux Live CD, with the HDD in the laptop. The CD spins.. and after awhile the CD stops and nothing happens...
For your kind advise if my HDD is actually faulty or is there anything wrong with other components of the hardware.. 
Thank you.
Best Regards, 
Meihuey

>Will I be able to do the things it explains in the link to solve my problem?
Please don't be mad on me but if this article is written by Microsoft then you must ask them. I presume they have tested this method before they offered it as official document.
You are right about recovery installation. When you use it the whole OS will be removed and installed again.

Similar Messages

  • Unable to boot laptop

    Hi, I currently have a serious problem with my Pavilion g4 laptop with Windows 7 Home Premium 64 bit.
    Last night after I finished using my laptop, I closed its lid as I usually do and we both went to sleep. 
    But this morning when I opened it again, instead of starting up normally I got this error: Oxc00000e9 and I was unable to boot Windows. I didn't have any USB devices connected so I'm worried that it might be a problem with the hard drive.
    I tried getting into Safe Mode, but after loading part of the files it stopped working and I was given an option to Startup Repair.
    After that the laptop was stuck for some minutes in a Windows gray screen with cursor before the Repair window appeared. It run and asked me to restart to see if it had worked or not.
    It took some while to restart, the Windows loading icon came up but then instead of booting the system I was sent again to a screen which looked like the Startup Repair one, with the cursor on it but nothing else.
    It was stuck for half an hour on this screen, then this window appeared:
    Windows Script Host
    Script: X:/Rita-tool/Start.vbs
    Line: 93
    Char: 14
    Error: The system cannot find the file specified.
    Code: 80070002
    Source: (null)
    Then I got another window:
    HP Recover
    Create File Fail
    Clicked OK
    Got another Window:
    HP Recovery Manager
    Contact HP Customer Support
    Recovery not supported under current configuration, please enable option for Intel Smart Response Technology and try again.
    After that the laptop turned itself off.
    I am out of warranty by two months, but would like to know if there's anything I can try before taking it with a technician.
    Please help!
    Thank you
    This question was solved.
    View Solution.

    Yes boot to safe mode with command prompt and run chkdsk C:  /r and see if it will repair any bad file structure and if you get bad sectors. 

  • [Solved] Unable to boot (startup job is running)

    Hi there!
    Today I went home and tried to boot my laptop there, but was unable to boot Arch.
    Before I went home I did a system update using  ' sudo pacman -Syu '  and shut the laptop off normally. Right now I get the following message whilst booting:
    " A startup job is running for dev-disk...25EFDCE0.device"
    It fails after 1 min. 30s and shows a time out error for dependency /mnt/6776F38425EFDCE0, and refuses to boot. I waited for 5 min. but the only thing working at that stage is the shut down button (which appears to enter a normal shutdown mode).
    Grub 2 is functioning; Windows 8 boots up fine (same HDD); though all options to boot arch fail because of the 'startup job error message'.
    Do any of you know how I can fix this, or how to boot/fix arch such that I can attempt to fix it? Based on a search trough this forum it might be an error in FSTAB,  although all cases reported on this forum appear to boot normally after the 'a startup job is running 'error message'.
    Many thanks.
    Last edited by Simthadim (2014-10-11 09:43:36)

    Thank you for your response.
    Changing the UUID's to /dev/sdaX did not do it's magic, unfortunately. The ' a start job'  message is gone, the boot however gets stuck at
    /dev/sda2 clean .... (beginning of boot)
    Unfortunately I did not properly save the back-up of my fstab file, so the initial set up is lost. Was able to acces arch using alt+f2 and have restored it manually with
    lsblk -f
    It currently looks like this. I did have a line to automount my data partition (/dev/sda4, label: Data), but didn' t know how to restore that one as that line got deleted too.  My gut says this automount was causing the initial error, but it should boot up normally with the current fstab file, right?
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda2
    UUID=47faa9c6-13d9-4d4f-8744-78766ea7c193 / ext4 rw,relatime,data=ordered 0 1
    # /dev/sda3
    UUID=bd14a274-a365-4511-9a11-151e086a42db none swap defaults 0 0
    UUID=509F9EA61178387E /run/media/simon/Data ntfs auto 0 2

  • [Solved] Laptop hangs at boot.

    Hi,
    Since today, my laptop hangs at boot (after I input my password for disk encryption). If I boot without 'quiet' the last message is "Started LVM2 PV scan on device 254:0" as well as some messages about Bluetooth. After these, simply nothing happens.
    The last change I made to my system before this problem started to occur was to patch xf86-input-synaptics with this patch for palm detection: https://gist.github.com/silverhammermba … caa63c86f1 I'm not sure if this is related, but I can't think of anything else I changed.
    Is there a way I can at least get a shell so I can view dmesg output or try to revert to the default synaptics driver?
    Regards,
    wo0p
    Last edited by wo0p (2015-06-19 21:06:53)

    Thanks, I managed to get to a shell using CTRL + ALT + F2. I was certain I tried that, but I might have been hitting CTRL + ALT + 2 the whole time, quite embarrassing...
    Can I just revert to the repository version of xf86-input-synaptics by removing it with pacman -R and then reinstalling with pacman -S ? If so, this doesn't fix my problem.
    I looked through dmesg and the journal but couldn't see any errors. Is there something I missed?
    EDIT: Thanks for the help, I think the problem was that installing the package had created a config (with .pacnew) in the /etc/X11/xorg.conf.d/ directory which caused the problems.
    I would still like to know if I can revert to the repository version of a package in the way I outlined above though.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 4.0.5-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Sat Jun 6 18:37:49 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=abe988d4-2da5-481b-a713-939e77dfb317 rw cryptdevice=/dev/sda3:luks:allow-discards quiet i915.enable_execlists=0
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c71d9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c71da000-0x00000000c7541fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7542000-0x00000000caa82fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000caa83000-0x00000000caae1fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caae2000-0x00000000cb2e3fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb2e4000-0x00000000cc46bfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cc46c000-0x00000000ccee4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ccee5000-0x00000000ccffefff] type 20
    [ 0.000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cd800000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.40 by American Megatrends
    [ 0.000000] efi: ACPI=0xcb6e8000 ACPI 2.0=0xcb6e8000 SMBIOS=0xcce2d998
    [ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000058000) (0MB)
    [ 0.000000] efi: mem01: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
    [ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
    [ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem04: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f29000) (14MB)
    [ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f29000-0x0000000010000000) (240MB)
    [ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000010000000-0x000000001000b000) (0MB)
    [ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000001000b000-0x000000003675a000) (615MB)
    [ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003675a000-0x00000000373a5000) (12MB)
    [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000373a5000-0x000000008da14000) (1382MB)
    [ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000008da14000-0x00000000bf558000) (795MB)
    [ 0.000000] efi: mem11: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf558000-0x00000000bf598000) (0MB)
    [ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bf598000-0x00000000c62f8000) (109MB)
    [ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000c62f8000-0x00000000c6316000) (0MB)
    [ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c6316000-0x00000000c71da000) (14MB)
    [ 0.000000] efi: mem15: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000c71da000-0x00000000c7542000) (3MB)
    [ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7542000-0x00000000c7548000) (0MB)
    [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7548000-0x00000000c8419000) (14MB)
    [ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c8419000-0x00000000ca483000) (32MB)
    [ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ca483000-0x00000000ca7de000) (3MB)
    [ 0.000000] efi: mem20: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ca7de000-0x00000000caa83000) (2MB)
    [ 0.000000] efi: mem21: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000caa83000-0x00000000caae2000) (0MB)
    [ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000caae2000-0x00000000cb2da000) (7MB)
    [ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000cb2da000-0x00000000cb2e4000) (0MB)
    [ 0.000000] efi: mem24: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cb2e4000-0x00000000cc46c000) (17MB)
    [ 0.000000] efi: mem25: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cc46c000-0x00000000ccee5000) (10MB)
    [ 0.000000] efi: mem26: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ccee5000-0x00000000ccfff000) (1MB)
    [ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ccfff000-0x00000000cd000000) (0MB)
    [ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000022f000000) (4848MB)
    [ 0.000000] efi: mem29: [Reserved | | | | | | | | | ] range=[0x00000000cd800000-0x00000000d0000000) (40MB)
    [ 0.000000] efi: mem30: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem31: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem32: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem33: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem34: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem35: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX303LNB/UX303LNB, BIOS UX303LNB.203 12/10/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
    [ 0.000000] 1 base 0080000000 mask 7FC0000000 write-back
    [ 0.000000] 2 base 00C0000000 mask 7FF8000000 write-back
    [ 0.000000] 3 base 00C8000000 mask 7FFC000000 write-back
    [ 0.000000] 4 base 00CC000000 mask 7FFF000000 write-back
    [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
    [ 0.000000] 6 base 0200000000 mask 7FC0000000 write-back
    [ 0.000000] 7 base 0230000000 mask 7FF0000000 uncachable
    [ 0.000000] 8 base 022F000000 mask 7FFF000000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
    [ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
    [ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
    [ 0.000000] [mem 0x22ee00000-0x22effffff] page 2M
    [ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x22edfffff]
    [ 0.000000] [mem 0x220000000-0x22edfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc71d9fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc6ffffff] page 2M
    [ 0.000000] [mem 0xc7000000-0xc71d9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xc7542000-0xcaa82fff]
    [ 0.000000] [mem 0xc7542000-0xc75fffff] page 4k
    [ 0.000000] [mem 0xc7600000-0xca9fffff] page 2M
    [ 0.000000] [mem 0xcaa00000-0xcaa82fff] page 4k
    [ 0.000000] BRK [0x01b21000, 0x01b21fff] PGTABLE
    [ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xcaae2000-0xcb2e3fff]
    [ 0.000000] [mem 0xcaae2000-0xcabfffff] page 4k
    [ 0.000000] [mem 0xcac00000-0xcb1fffff] page 2M
    [ 0.000000] [mem 0xcb200000-0xcb2e3fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xccfff000-0xccffffff]
    [ 0.000000] [mem 0xccfff000-0xccffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x3675a000-0x373a4fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000CB6E8000 000024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 0x00000000CB6E80B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000CB701590 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000CB6E8218 019372 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
    [ 0.000000] ACPI: FACS 0x00000000CC469F80 000040
    [ 0.000000] ACPI: APIC 0x00000000CB7016A0 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000CB701728 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FIDT 0x00000000CB701770 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x00000000CB701810 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 0x00000000CB7018D8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000CB701918 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB701950 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: UEFI 0x00000000CB701C68 000042 (v01 00000000 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000CB701CB0 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
    [ 0.000000] ACPI: ASF! 0x00000000CB702930 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 0x00000000CB7029D0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000CB702F10 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000CB703A88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000CB706CD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: PCCT 0x00000000CB707068 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000CB7070D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000CB707BA0 006622 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
    [ 0.000000] ACPI: SSDT 0x00000000CB70E1C8 0006CE (v02 SgRef SgPch 00001000 INTL 20120913)
    [ 0.000000] ACPI: DMAR 0x00000000CB70E898 0000A8 (v01 INTEL BDW 00000001 INTL 00000001)
    [ 0.000000] ACPI: BGRT 0x00000000CB70E940 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000CB70E978 001914 (v01 OptRef OptTabl 00001000 INTL 20120913)
    [ 0.000000] ACPI: MSDM 0x00000000CAAE0E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x22eff8000-0x22effbfff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
    [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
    [ 0.000000] Normal [mem 0x0000000100000000-0x000000022effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
    [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
    [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c71d9fff]
    [ 0.000000] node 0: [mem 0x00000000c7542000-0x00000000caa82fff]
    [ 0.000000] node 0: [mem 0x00000000caae2000-0x00000000cb2e3fff]
    [ 0.000000] node 0: [mem 0x00000000ccfff000-0x00000000ccffffff]
    [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
    [ 0.000000] On node 0 totalpages: 2072250
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12925 pages used for memmap
    [ 0.000000] DMA32 zone: 827166 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19392 pages used for memmap
    [ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high res lint[0x24])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] low dfl lint[0x48])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] low res lint[0x49])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] low dfl lint[0x4c])
    [ 0.000000] ACPI: NMI not connected to LINT 1!
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc71da000-0xc7541fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcaa83000-0xcaae1fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb2e4000-0xcc46bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcc46c000-0xccee4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xccee5000-0xccffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcd7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcd800000-0xcfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88022ec00000 s86232 r8192 d32552 u524288
    [ 0.000000] pcpu-alloc: s86232 r8192 d32552 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2039847
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=abe988d4-2da5-481b-a713-939e77dfb317 rw cryptdevice=/dev/sda3:luks:allow-discards quiet i915.enable_execlists=0
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8015668K/8289000K available (5629K kernel code, 840K rwdata, 1784K rodata, 1160K init, 1152K bss, 273332K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] tsc: Detected 2394.256 MHz processor
    [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.03 BogoMIPS (lpj=7980853)
    [ 0.000025] pid_max: default: 32768 minimum: 301
    [ 0.000029] ACPI: Core revision 20150204
    [ 0.026322] ACPI: All ACPI Tables successfully acquired
    [ 0.028669] Security Framework initialized
    [ 0.028673] Yama: becoming mindful.
    [ 0.029045] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.030311] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.030856] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.030863] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.031022] Initializing cgroup subsys blkio
    [ 0.031024] Initializing cgroup subsys memory
    [ 0.031029] Initializing cgroup subsys devices
    [ 0.031030] Initializing cgroup subsys freezer
    [ 0.031032] Initializing cgroup subsys net_cls
    [ 0.031051] CPU: Physical Processor ID: 0
    [ 0.031051] CPU: Processor Core ID: 0
    [ 0.031056] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.031056] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.031963] mce: CPU supports 7 MCE banks
    [ 0.031974] CPU0: Thermal monitoring enabled (TM1)
    [ 0.032002] process: using mwait in idle threads
    [ 0.032005] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
    [ 0.032006] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
    [ 0.032281] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
    [ 0.033915] ftrace: allocating 21316 entries in 84 pages
    [ 0.041185] dmar: Host address width 39
    [ 0.041187] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.041194] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
    [ 0.041195] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.041199] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
    [ 0.041199] dmar: RMRR base: 0x000000cce3e000 end: 0x000000cce4cfff
    [ 0.041200] dmar: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
    [ 0.041202] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.041203] HPET id 0 under DRHD base 0xfed91000
    [ 0.041484] Your BIOS is broken and requested that x2apic be disabled.
    This will slightly decrease performance.
    Use 'intremap=no_x2apic_optout' to override BIOS request.
    [ 0.041495] Enabled IRQ remapping in xapic mode
    [ 0.041496] x2apic: IRQ remapping doesn't support X2APIC mode
    [ 0.042099] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.075131] TSC deadline timer enabled
    [ 0.075133] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (fam: 06, model: 3d, stepping: 04)
    [ 0.075153] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
    [ 0.075157] ... version: 3
    [ 0.075158] ... bit width: 48
    [ 0.075159] ... generic registers: 4
    [ 0.075159] ... value mask: 0000ffffffffffff
    [ 0.075160] ... max period: 0000ffffffffffff
    [ 0.075161] ... fixed-purpose events: 3
    [ 0.075161] ... event mask: 000000070000000f
    [ 0.095289] x86: Booting SMP configuration:
    [ 0.095291] .... node #0, CPUs: #1
    [ 0.109467] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.116159] #2 #3
    [ 0.150974] x86: Booted up 1 node, 4 CPUs
    [ 0.150977] smpboot: Total of 4 processors activated (19161.13 BogoMIPS)
    [ 0.154621] devtmpfs: initialized
    [ 0.156400] PM: Registering ACPI NVS region [mem 0xcb2e4000-0xcc46bfff] (18382848 bytes)
    [ 0.156672] pinctrl core: initialized pinctrl subsystem
    [ 0.156705] RTC time: 20:30:15, date: 06/19/15
    [ 0.156793] NET: Registered protocol family 16
    [ 0.167829] cpuidle: using governor ladder
    [ 0.181188] cpuidle: using governor menu
    [ 0.181212] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.181214] ACPI: bus type PCI registered
    [ 0.181215] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.181275] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.181277] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.181347] PCI: Using configuration type 1 for base access
    [ 0.194800] ACPI: Added _OSI(Module Device)
    [ 0.194802] ACPI: Added _OSI(Processor Device)
    [ 0.194803] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.194804] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.197821] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.200562] ACPI: Executed 8 blocks of module-level executable AML code
    [ 0.206934] ACPI: Dynamic OEM Table Load:
    [ 0.206939] ACPI: SSDT 0xFFFF880224F79000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
    [ 0.207792] ACPI: Dynamic OEM Table Load:
    [ 0.207796] ACPI: SSDT 0xFFFF880224EFA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
    [ 0.208691] ACPI: Dynamic OEM Table Load:
    [ 0.208695] ACPI: SSDT 0xFFFF880224F59800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
    [ 0.210219] ACPI: Interpreter enabled
    [ 0.210227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
    [ 0.210234] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
    [ 0.210245] ACPI: (supports S0 S3 S4 S5)
    [ 0.210246] ACPI: Using IOAPIC for interrupt routing
    [ 0.210268] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.212136] ACPI: Power Resource [PG00] (on)
    [ 0.212420] ACPI: Power Resource [PG01] (on)
    [ 0.212693] ACPI: Power Resource [PG02] (on)
    [ 0.213679] ACPI: Power Resource [PC05] (on)
    [ 0.220550] ACPI: Power Resource [FN00] (off)
    [ 0.220603] ACPI: Power Resource [FN01] (off)
    [ 0.220655] ACPI: Power Resource [FN02] (off)
    [ 0.220707] ACPI: Power Resource [FN03] (off)
    [ 0.220759] ACPI: Power Resource [FN04] (off)
    [ 0.221480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.221485] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.221893] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.222200] PCI host bridge to bus 0000:00
    [ 0.222202] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.222204] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
    [ 0.222205] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
    [ 0.222206] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [ 0.222208] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
    [ 0.222209] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
    [ 0.222210] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
    [ 0.222211] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
    [ 0.222212] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
    [ 0.222213] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
    [ 0.222214] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
    [ 0.222215] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
    [ 0.222216] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
    [ 0.222222] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
    [ 0.222300] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
    [ 0.222309] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf5ffffff 64bit]
    [ 0.222314] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.222318] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.222391] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
    [ 0.222397] pci 0000:00:03.0: reg 0x10: [mem 0xf721c000-0xf721ffff 64bit]
    [ 0.222476] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
    [ 0.222486] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit]
    [ 0.222580] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
    [ 0.222595] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
    [ 0.222648] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.222690] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.222719] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
    [ 0.222734] pci 0000:00:16.0: reg 0x10: [mem 0xf7224000-0xf722401f 64bit]
    [ 0.222786] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.222854] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
    [ 0.222869] pci 0000:00:1b.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit]
    [ 0.222918] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.222959] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.222986] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
    [ 0.223048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.223089] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.223118] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
    [ 0.223184] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.223224] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.223250] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
    [ 0.223307] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.223348] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.223382] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
    [ 0.223542] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
    [ 0.223554] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.223559] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.223565] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.223571] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.223576] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.223582] pci 0000:00:1f.2: reg 0x24: [mem 0xf7222000-0xf72227ff]
    [ 0.223613] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.223670] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
    [ 0.223682] pci 0000:00:1f.3: reg 0x10: [mem 0xf7221000-0xf72210ff 64bit]
    [ 0.223697] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.223776] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
    [ 0.223805] pci 0000:00:1f.6: reg 0x10: [mem 0xf7220000-0xf7220fff 64bit]
    [ 0.224013] acpiphp: Slot [1] registered
    [ 0.224017] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.224292] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
    [ 0.224423] pci 0000:02:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
    [ 0.224907] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.231440] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.231445] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
    [ 0.231518] pci 0000:03:00.0: [10de:1341] type 00 class 0x030200
    [ 0.231534] pci 0000:03:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.231547] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.231561] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.231570] pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.231579] pci 0000:03:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.231660] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.237972] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.237975] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
    [ 0.237977] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.237982] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.238138] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.239089] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
    [ 0.239130] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239209] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239247] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239285] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239323] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.239770] ACPI: Enabled 4 GPEs in block 00 to 7F
    [ 0.239827] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.239900] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.239901] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.239903] vgaarb: loaded
    [ 0.239904] vgaarb: bridge control possible 0000:00:02.0
    [ 0.239990] PCI: Using ACPI for IRQ routing
    [ 0.241093] PCI: pci_cache_line_size set to 64 bytes
    [ 0.241127] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
    [ 0.241128] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
    [ 0.241129] e820: reserve RAM buffer [mem 0xc71da000-0xc7ffffff]
    [ 0.241129] e820: reserve RAM buffer [mem 0xcaa83000-0xcbffffff]
    [ 0.241130] e820: reserve RAM buffer [mem 0xcb2e4000-0xcbffffff]
    [ 0.241131] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
    [ 0.241132] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
    [ 0.241211] NetLabel: Initializing
    [ 0.241212] NetLabel: domain hash size = 128
    [ 0.241213] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.241222] NetLabel: unlabeled traffic allowed by default
    [ 0.241240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.241244] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.243265] Switched to clocksource hpet
    [ 0.246853] pnp: PnP ACPI init
    [ 0.246992] system 00:00: [io 0x0240-0x0259] has been reserved
    [ 0.246995] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.247057] pnp 00:01: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.247087] pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
    [ 0.247149] system 00:03: [io 0x0680-0x069f] has been reserved
    [ 0.247151] system 00:03: [io 0xffff] has been reserved
    [ 0.247153] system 00:03: [io 0xffff] has been reserved
    [ 0.247154] system 00:03: [io 0xffff] has been reserved
    [ 0.247155] system 00:03: [io 0x1800-0x18fe] could not be reserved
    [ 0.247156] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.247158] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.247192] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.247218] system 00:05: [io 0x1854-0x1857] has been reserved
    [ 0.247220] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.247329] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.247330] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.247332] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.247334] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.247335] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.247336] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.247338] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.247339] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.247340] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.247341] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.247343] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 0.247344] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 0.247346] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.247731] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.248169] pnp: PnP ACPI: found 8 devices
    [ 0.253940] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.253949] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.253952] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff]
    [ 0.253958] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.253960] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
    [ 0.253963] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.253966] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.253970] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
    [ 0.253972] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
    [ 0.253973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [ 0.253974] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
    [ 0.253975] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
    [ 0.253976] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
    [ 0.253977] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
    [ 0.253979] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
    [ 0.253980] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
    [ 0.253981] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
    [ 0.253982] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
    [ 0.253983] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfeafffff window]
    [ 0.253984] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
    [ 0.253986] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
    [ 0.253987] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.253988] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.254009] NET: Registered protocol family 2
    [ 0.254153] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.254258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.254368] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.254382] TCP: reno registered
    [ 0.254390] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.254411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.254449] NET: Registered protocol family 1
    [ 0.254459] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.254627] PCI: CLS 64 bytes, default 64
    [ 0.254658] Unpacking initramfs...
    [ 0.419468] Freeing initrd memory: 12588K (ffff88003675a000 - ffff8800373a5000)
    [ 0.419489] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.419492] software IO TLB [mem 0xc2316000-0xc6316000] (64MB) mapped at [ffff8800c2316000-ffff8800c6315fff]
    [ 0.419632] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.419670] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x13
    [ 0.419675] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x13
    [ 0.419681] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x13
    [ 0.419686] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x13
    [ 0.419721] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.419738] Scanning for low memory corruption every 60 seconds
    [ 0.419899] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.419912] Initialise system trusted keyring
    [ 0.420141] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.421107] zpool: loaded
    [ 0.421109] zbud: loaded
    [ 0.421228] VFS: Disk quotas dquot_6.5.2
    [ 0.421250] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.421369] Key type big_key registered
    [ 0.421511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.421537] io scheduler noop registered
    [ 0.421539] io scheduler deadline registered
    [ 0.421558] io scheduler cfq registered (default)
    [ 0.421962] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.421965] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.421974] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 0.421975] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.421977] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 0.421986] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.421987] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.421990] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.421994] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.422004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.422016] efifb: probing for efifb
    [ 0.422032] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 8128k, total 8128k
    [ 0.422033] efifb: mode is 1920x1080x32, linelength=7680, pages=1
    [ 0.422034] efifb: scrolling: redraw
    [ 0.422035] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.425476] Console: switching to colour frame buffer device 240x67
    [ 0.429197] fb0: EFI VGA frame buffer device
    [ 0.429204] intel_idle: MWAIT substates: 0x11142120
    [ 0.429205] intel_idle: v0.4 model 0x3D
    [ 0.429205] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.429389] GHES: HEST is not enabled!
    [ 0.429438] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.429759] Linux agpgart interface v0.103
    [ 0.429798] rtc_cmos 00:04: RTC can wake from S4
    [ 0.429904] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.429928] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.429937] Intel P-state driver initializing.
    [ 0.430057] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.430573] TCP: cubic registered
    [ 0.430824] NET: Registered protocol family 10
    [ 0.431247] NET: Registered protocol family 17
    [ 0.431931] Loading compiled-in X.509 certificates
    [ 0.431964] registered taskstats version 1
    [ 0.433023] Magic number: 3:29:549
    [ 0.433038] clockevents clockevent0: hash matches
    [ 0.433067] acpi PNP0C0F:00: hash matches
    [ 0.433191] rtc_cmos 00:04: setting system clock to 2015-06-19 20:30:16 UTC (1434745816)
    [ 0.433387] PM: Hibernation image not present or could not be loaded.
    [ 0.434000] Freeing unused kernel memory: 1160K (ffffffff818d4000 - ffffffff819f6000)
    [ 0.434003] Write protecting the kernel read-only data: 8192k
    [ 0.434643] Freeing unused kernel memory: 504K (ffff880001582000 - ffff880001600000)
    [ 0.434865] Freeing unused kernel memory: 264K (ffff8800017be000 - ffff880001800000)
    [ 0.441392] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.458172] sdhci: Secure Digital Host Controller Interface driver
    [ 0.458174] sdhci: Copyright(c) Pierre Ossman
    [ 0.461368] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.464831] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.466075] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.466090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.466093] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.466095] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.466097] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.467331] ACPI: bus type USB registered
    [ 0.467357] usbcore: registered new interface driver usbfs
    [ 0.467367] usbcore: registered new interface driver hub
    [ 0.467449] usbcore: registered new device driver usb
    [ 0.467882] SCSI subsystem initialized
    [ 0.469036] libata version 3.00 loaded.
    [ 0.469212] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.469219] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.469295] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
    [ 0.469300] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.469567] hub 1-0:1.0: USB hub found
    [ 0.469579] hub 1-0:1.0: 11 ports detected
    [ 0.472290] AVX2 version of gcm_enc/dec engaged.
    [ 0.472292] AES CTR mode by8 optimization enabled
    [ 0.473751] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.473755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.473912] hub 2-0:1.0: USB hub found
    [ 0.473922] hub 2-0:1.0: 4 ports detected
    [ 0.475776] ahci 0000:00:1f.2: version 3.0
    [ 0.486870] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.486873] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.487298] scsi host0: ahci
    [ 0.487404] scsi host1: ahci
    [ 0.487499] scsi host2: ahci
    [ 0.487602] scsi host3: ahci
    [ 0.487645] ata1: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222100 irq 46
    [ 0.487646] ata2: DUMMY
    [ 0.487647] ata3: DUMMY
    [ 0.487648] ata4: DUMMY
    [ 0.518177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.807120] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.808148] ata1.00: ATA-9: SanDisk SD7SB3Q256G1002, X2150000, max UDMA/133
    [ 0.808151] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.809886] ata1.00: configured for UDMA/133
    [ 0.810105] scsi 0:0:0:0: Direct-Access ATA SanDisk SD7SB3Q2 0000 PQ: 0 ANSI: 5
    [ 0.811845] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 0.811926] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.811929] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.811949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.813282] sda: sda1 sda2 sda3
    [ 0.813602] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 0.833270] device-mapper: uevent: version 1.0.3
    [ 0.833364] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
    [ 0.833785] usb 1-5: new high-speed USB device number 2 using xhci_hcd
    [ 1.207444] usb 1-8: new full-speed USB device number 3 using xhci_hcd
    [ 1.381488] usb 1-8: No LPM exit latency info found, disabling LPM.
    [ 1.420941] tsc: Refined TSC clocksource calibration: 2394.457 MHz
    [ 2.422042] Switched to clocksource tsc
    [ 4.601817] NET: Registered protocol family 38
    [ 5.500920] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.557255] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 5.557386] systemd[1]: Detected architecture 'x86-64'.
    [ 5.557569] systemd[1]: Set hostname to <WOOP-PLUTO>.
    [ 5.581258] systemd[1]: Unit type .busname is not supported on this system.
    [ 5.609266] systemd[1]: Cannot add dependency job for unit vmware-USBArbitrator.service, ignoring: Unit vmware-USBArbitrator.service failed to load: No such file or directory.
    [ 5.609648] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 5.609656] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 5.609676] systemd[1]: Reached target Login Prompts.
    [ 5.609681] systemd[1]: Starting Login Prompts.
    [ 5.609691] systemd[1]: Reached target Remote File Systems.
    [ 5.609695] systemd[1]: Starting Remote File Systems.
    [ 5.609816] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 5.609824] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 5.609831] systemd[1]: Reached target Encrypted Volumes.
    [ 5.609836] systemd[1]: Starting Encrypted Volumes.
    [ 5.610016] systemd[1]: Created slice Root Slice.
    [ 5.610022] systemd[1]: Starting Root Slice.
    [ 5.610045] systemd[1]: Listening on udev Control Socket.
    [ 5.610051] systemd[1]: Starting udev Control Socket.
    [ 5.610064] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 5.610069] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 5.610116] systemd[1]: Created slice User and Session Slice.
    [ 5.610121] systemd[1]: Starting User and Session Slice.
    [ 5.610163] systemd[1]: Created slice System Slice.
    [ 5.610171] systemd[1]: Starting System Slice.
    [ 5.610222] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 5.610228] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 5.610271] systemd[1]: Created slice system-rfkill\x2dblock.slice.
    [ 5.610276] systemd[1]: Starting system-rfkill\x2dblock.slice.
    [ 5.610318] systemd[1]: Created slice system-getty.slice.
    [ 5.610323] systemd[1]: Starting system-getty.slice.
    [ 5.610340] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 5.610345] systemd[1]: Starting Delayed Shutdown Socket.
    [ 5.610365] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 5.610370] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 5.612312] random: nonblocking pool is initialized
    [ 5.620499] systemd[1]: Listening on Journal Audit Socket.
    [ 5.620536] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 5.620543] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 5.620550] systemd[1]: Reached target Slices.
    [ 5.620555] systemd[1]: Starting Slices.
    [ 5.620589] systemd[1]: Listening on Journal Socket.
    [ 5.620598] systemd[1]: Starting Journal Socket.
    [ 5.620608] systemd[1]: Started File System Check on Root Device.
    [ 5.620937] systemd[1]: Mounting Debug File System...
    [ 5.621251] systemd[1]: Mounting Huge Pages File System...
    [ 5.621859] systemd[1]: Started Load Kernel Modules.
    [ 5.621874] systemd[1]: Mounted FUSE Control File System.
    [ 5.622224] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 5.622646] systemd[1]: Starting Apply Kernel Variables...
    [ 5.623622] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 5.623961] systemd[1]: Mounting POSIX Message Queue File System...
    [ 5.624013] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 5.624026] systemd[1]: Starting Journal Socket (/dev/log).
    [ 5.624427] systemd[1]: Starting Journal Service...
    [ 5.624747] systemd[1]: Mounting Configuration File System...
    [ 5.625120] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 5.625185] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 5.625194] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 5.625202] systemd[1]: Reached target Paths.
    [ 5.625207] systemd[1]: Starting Paths.
    [ 5.625476] systemd[1]: Starting Setup Virtual Console...
    [ 5.625513] systemd[1]: Listening on udev Kernel Socket.
    [ 5.625525] systemd[1]: Starting udev Kernel Socket.
    [ 5.625917] systemd[1]: Starting udev Coldplug all Devices...
    [ 5.626783] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 5.626862] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 214 (systemd-binfmt)
    [ 5.627145] systemd[1]: Mounting Arbitrary Executable File Formats File System...
    [ 5.631100] systemd[1]: Started Setup Virtual Console.
    [ 5.637366] systemd[1]: Started Apply Kernel Variables.
    [ 5.638348] systemd[1]: Mounted Huge Pages File System.
    [ 5.638376] systemd[1]: Mounted POSIX Message Queue File System.
    [ 5.638392] systemd[1]: Mounted Configuration File System.
    [ 5.639302] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
    [ 5.639530] systemd-journald[216]: Failed to set file attributes: Inappropriate ioctl for device
    [ 5.640253] systemd[1]: Mounted Arbitrary Executable File Formats File System.
    [ 5.640287] systemd[1]: Mounted Debug File System.
    [ 5.642518] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 5.642721] systemd[1]: Started Set Up Additional Binary Formats.
    [ 5.642901] systemd[1]: Started udev Coldplug all Devices.
    [ 5.650745] systemd[1]: Starting Load/Save Random Seed...
    [ 5.650775] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 5.651626] systemd[1]: Started Rebuild Hardware Database.
    [ 5.651645] systemd[1]: Started First Boot Wizard.
    [ 5.651659] systemd[1]: Started Create System Users.
    [ 5.651982] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 5.655137] systemd[1]: Started Load/Save Random Seed.
    [ 5.673398] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 5.673906] systemd[1]: Starting udev Kernel Device Manager...
    [ 5.673930] systemd[1]: Reached target Local File Systems (Pre).
    [ 5.673941] systemd[1]: Starting Local File Systems (Pre).
    [ 5.674530] systemd[1]: Mounting /tmp...
    [ 5.676222] systemd[1]: Mounted /tmp.
    [ 5.714702] systemd[1]: Started udev Kernel Device Manager.
    [ 5.731901] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [ 5.732762] ACPI: Lid Switch [LID]
    [ 5.732815] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
    [ 5.732819] ACPI: Sleep Button [SLPB]
    [ 5.732867] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 5.732870] ACPI: Power Button [PWRF]
    [ 5.735236] systemd[1]: Started Journal Service.
    [ 5.739454] ACPI: AC Adapter [AC0] (off-line)
    [ 5.740472] systemd-journald[216]: Received request to flush runtime journal from PID 1
    [ 5.741401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 5.791768] [drm] Initialized drm 1.1.0 20060810
    [ 5.797640] ACPI: Battery Slot [BAT0] (battery present)
    [ 5.797836] wmi: Mapper loaded
    [ 5.824171] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.845805] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
    [ 5.846099] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
    [ 5.846103] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 5.846105] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
    [ 5.846107] sound hdaudioC1D0: mono: mono_out=0x0
    [ 5.846108] sound hdaudioC1D0: inputs:
    [ 5.846111] sound hdaudioC1D0: Internal Mic=0x1a
    [ 5.846113] sound hdaudioC1D0: Mic=0x19
    [ 5.846718] sound hdaudioC1D0: Enable sync_write for stable communication
    [ 5.846766] [drm] Memory usable by graphics device = 4096M
    [ 5.846770] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
    [ 5.846773] fb: switching to inteldrmfb from EFI VGA
    [ 5.846791] Console: switching to colour dummy device 80x25
    [ 5.846944] [drm] Replacing VGA console driver
    [ 5.849342] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input8
    [ 5.849463] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
    [ 5.849490] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [ 5.855615] thermal LNXTHERM:00: registered as thermal_zone2
    [ 5.855618] ACPI: Thermal Zone [THRM] (48 C)
    [ 5.858016] thermal LNXTHERM:01: registered as thermal_zone3
    [ 5.858018] ACPI: Thermal Zone [TZ00] (28 C)
    [ 5.858296] thermal LNXTHERM:02: registered as thermal_zone4
    [ 5.858298] ACPI: Thermal Zone [TZ01] (30 C)
    [ 5.858483] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.862994] Bluetooth: Core ver 2.20
    [ 5.863009] NET: Registered protocol family 31
    [ 5.863010] Bluetooth: HCI device and connection manager initialized
    [ 5.863015] Bluetooth: HCI socket layer initialized
    [ 5.863018] Bluetooth: L2CAP socket layer initialized
    [ 5.863024] Bluetooth: SCO socket layer initialized
    [ 5.866422] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 5.867516] Intel(R) Wireless WiFi driver for Linux
    [ 5.867518] Copyright(c) 2003- 2014 Intel Corporation
    [ 5.867886] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 5.867888] [drm] Driver supports precise vblank timestamp query.
    [ 5.868042] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 5.870016] usbcore: registered new interface driver btusb
    [ 5.877889] iwlwifi 0000:02:00.0: loaded firmware version 25.17.12.0 op_mode iwlmvm
    [ 5.880266] intel_rapl: Found RAPL domain package
    [ 5.880269] intel_rapl: Found RAPL domain core
    [ 5.880272] intel_rapl: Found RAPL domain uncore
    [ 5.880274] intel_rapl: Found RAPL domain dram
    [ 5.882922] media: Linux media interface: v0.10
    [ 5.884691] Bluetooth: hci0: read Intel version: 370810011002270d00
    [ 5.886215] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
    [ 5.918064] Linux video capture interface: v2.00
    [ 5.921474] iTCO_vendor_support: vendor-support=0
    [ 5.922849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 5.922892] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 5.922978] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.923412] asus_wmi: ASUS WMI generic driver loaded
    [ 5.930495] fbcon: inteldrmfb (fb0) is primary device
    [ 5.932627] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x184
    [ 5.933078] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
    [ 5.933238] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
    [ 5.933985] asus_wmi: Initialization: 0x1
    [ 5.934961] asus_wmi: BIOS WMI version: 7.9
    [ 5.935116] asus_wmi: SFUN value: 0xa2077
    [ 5.936702] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
    [ 5.937631] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 5.937749] Adding 8388604k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:8388604k SSFS
    [ 5.938748] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
    [ 5.941016] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
    [ 5.943447] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (064e:9700)
    [ 5.945744] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
    [ 5.945833] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150204/video-1257)
    [ 5.945834] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
    [ 5.945879] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input18
    [ 5.945995] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
    [ 5.945999] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
    [ 5.946115] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\SMB0) (20150204/utaddress-254)
    [ 5.946120] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
    [ 5.946121] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 5.949372] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
    [ 5.949434] usbcore: registered new interface driver uvcvideo
    [ 5.949435] USB Video Class driver (1.1.1)
    [ 6.030252] usb 1-8: USB disconnect, device number 3
    [ 6.030362] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-19)
    [ 6.030393] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
    [ 6.030780] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
    [ 6.030895] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
    [ 6.030945] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [ 6.031170] asus_wmi: Backlight controlled by ACPI video driver
    [ 6.032320] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 6.036491] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
    [ 6.054693] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input15
    [ 6.056212] mousedev: PS/2 mouse device common for all mice
    [ 6.497765] bbswitch: version 0.8
    [ 6.497769] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 6.497773] bbswitch: Found discrete VGA device 0000:03:00.0: \_SB_.PCI0.RP05.PEGP
    [ 6.497783] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [ 6.497854] bbswitch: detected an Optimus _DSM function
    [ 6.497904] bbswitch: Succesfully loaded. Discrete card 0000:03:00.0 is on
    [ 6.499057] bbswitch: disabling discrete graphics
    [ 6.499065] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150204/nsarguments-95)
    [ 6.794166] /dev/vmmon[384]: Module vmmon: registered with major=10 minor=165
    [ 6.794169] /dev/vmmon[384]: Module vmmon: initialized
    [ 6.816392] Guest personality initialized and is inactive
    [ 6.816436] VMCI host device registered (name=vmci, major=10, minor=56)
    [ 6.816437] Initialized host personality
    [ 6.847875] NET: Registered protocol family 40
    [ 6.870900] fuse init (API version 7.23)
    [ 6.898024] ppdev: user-space parallel port driver
    [ 7.106012] Console: switching to colour frame buffer device 240x67
    [ 7.110124] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 7.110125] i915 0000:00:02.0: registered panic notifier
    [ 7.148418] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
    [ 7.148675] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
    [ 7.159323] /dev/vmnet: open called by PID 505 (vmnet-bridge)
    [ 7.159334] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 7.159355] /dev/vmnet: port on hub 0 successfully opened
    [ 7.159363] bridge-wlp2s0: device is wireless, enabling SMAC
    [ 7.159366] bridge-wlp2s0: up
    [ 7.159370] bridge-wlp2s0: attached
    [ 7.161385] bridge-wlp2s0: disabling the bridge
    [ 7.172268] bridge-wlp2s0: down
    [ 7.172274] bridge-wlp2s0: detached
    [ 7.549177] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.631166] /dev/vmnet: open called by PID 526 (vmnet-netifup)
    [ 7.631172] /dev/vmnet: hub 1 does not exist, allocating memory.
    [ 7.631183] /dev/vmnet: port on hub 1 successfully opened
    [ 7.649431] /dev/vmnet: open called by PID 528 (vmnet-dhcpd)
    [ 7.649442] /dev/vmnet: port on hub 1 successfully opened
    [ 7.659803] /dev/vmnet: open called by PID 536 (vmnet-natd)
    [ 7.659810] /dev/vmnet: hub 8 does not exist, allocating memory.
    [ 7.659822] /dev/vmnet: port on hub 8 successfully opened
    [ 7.662044] /dev/vmnet: open called by PID 537 (vmnet-netifup)
    [ 7.662051] /dev/vmnet: port on hub 8 successfully opened
    [ 7.672419] /dev/vmnet: open called by PID 542 (vmnet-dhcpd)
    [ 7.672431] /dev/vmnet: port on hub 8 successfully opened
    [ 8.032979] Bluetooth: hci0 command 0xfc8e tx timeout
    [ 8.033056] Bluetooth: hci0 sending frame failed (-19)
    [ 8.140139] cfg80211: Calling CRDA to update world regulatory domain
    [ 10.041263] Bluetooth: hci0 command 0xfc11 tx timeout
    [ 16.036148] Bluetooth: hci0 exiting Intel manufacturer mode failed (-110)
    [ 421.253320] usb 1-1: new high-speed USB device number 4 using xhci_hcd
    [ 421.429257] usb 1-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 421.429265] usb 1-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
    [ 421.439571] usb-storage 1-1:1.0: USB Mass Storage device detected
    [ 421.439662] scsi host4: usb-storage 1-1:1.0
    [ 421.439732] usbcore: registered new interface driver usb-storage
    [ 421.440704] usbcore: registered new interface driver uas
    [ 422.802584] scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 4
    [ 422.803405] sd 4:0:0:0: [sdb] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
    [ 422.804030] sd 4:0:0:0: [sdb] Write Protect is off
    [ 422.804039] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [ 422.804680] sd 4:0:0:0: [sdb] No Caching mode page found
    [ 422.809996] sd 4:0:0:0: [sdb] Assuming drive cache: write through
    [ 422.816610] sdb:
    [ 422.818457] sd 4:0:0:0: [sdb] Attached SCSI removable disk
    -- Logs begin at Sat 2015-05-02 12:41:07 CEST, end at Fri 2015-06-19 22:40:49 CEST. --
    Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Runtime journal is using 8.0M (max allowed 394.6M, trying to leave 591.9M free of 3.8G available → current limit 394.6M).
    Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Permanent journal is using 1.4G (max allowed 4.0G, trying to leave 4.0G free of 120.7G available → current limit 4.0G).
    Jun 19 22:30:21 WOOP-PLUTO systemd-journal[216]: Time spent on flushing to /var is 31.618ms for 2 entries.
    Jun 19 22:30:21 WOOP-PLUTO kernel: Initializing cgroup subsys cpuset
    Jun 19 22:30:21 WOOP-PLUTO kernel: Initializing cgroup subsys cpu
    Jun 19 22:30:21 WOOP-PLUTO kernel: Initiali

  • Unable to boot Z10, stuck on loading screen at 99% after a few hours.

    Hi, I am unable to boot Z10, stuck on loading screen at 99% after a few hours. I did not try to update, nor load any other OS versions.  Running a Bell Canada 10.1.  Tried to pull battery, leave phone boot for 5 hours, still stuck on 99%.  I tried plugging it in BB Link and computer will not recognize it.

    dazedandconfused wrote:
    Every option Im seeing is telling me Im going to lose my data... is this true? I know with other phones ppl are able to mount the device as if it were a hard drive and pull content from it... is this not possible with the Z10? Thanks...
    I understand you are frustrated and seeking solutions, but please don't double and triple post your inquiry.
    I've answered your thread already, here: 
    Re: Z10 stuck on loading logo on starting up
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 2009 Macbook unable to boot in any fashion

    I was recently given a broken Macbook from a friend who didn't want it anymore, and had no interest in fixing it. It's a 13.3" Macbook from 2009 with a 2.0GHz Core 2 Duo processor, 2GB of 1066MHz RAM, and an Nvidia GeForce 9400M. Since I can't get it to boot, and am not super familiar with Apple OS's (I'm more of a linux guy to be honest), I'm not entirely sure which version of OS X it's running, but from the production date my best guess would be Snow Leopard.
    So now to the problem.The first time I turned it on it booted to the login screen with no problem. Unfortunately that was the only time it worked. Now when I press the power button, it goes to the gray screen with the Apple logo, and the progresses to a blank blue screen. After approximately 5 seconds the screen goes black, and flickers in a somewhat periodic manner until I manually turn off the computer. In an attempt to fix it I tried to boot it in safe mode, but experienced the same problem. Next I tried to boot it off of an Ubuntu Live USB, but was unable to access the boot menu, and was therefore unable to boot off the flash drive.
    After doing a bit more research, I tried resetting the PRAM and NVRAM. I started the computer, pressing and continuing to hold the "option-command-p-r" key combination before the gray screen as per the instructions given at http://support.apple.com/kb/HT1379, but encountered the same progression of screens as I previously had, thus the only reasonable assumption is that it did not successfully reset. Next I tried resetting the SMC. I removed the battery, disconnected the the power adapter, and depressed the power button for 10 seconds, but this as well had no effect.
    Next I tried to run fsck by booting into single-user mode. Though it booted to what appeared to be the functional single-user mode command line prompt, after the line ":/ root#" I was unable to type any commands, and once again had to manually shut down the computer. On another attempt to boot is single user mode the message
    :/ root# AppleIntelCPUPowerManagement: initialization complete
    Broadcom2045FamilyUSBBluetoothHCIController::start booting in single user ... will wait for later
    [HCICcontroller][configurePM] power parent ready after 1 tries
    and another try yielded a last line identical to the first line of the above message, with the lower two lines appearing above it.
    I then, tested the RAM by trying all 6 permutations of the two 1GB sticks. With each configuration I tried to boot the computer normally, in safe mode, and in single-user mode, but in all 6 configurations the computer behaved exactly like (with the exception of it spending more time on the gray screen with Apple logo during the normal boot procedure when it was being run in the 4 positions that had only 1GB of RAM rather than the standard 2GB, but that was to be expected) it had been.
    Five notes of interest.
    1) The power adapter she gave me with it is an 85 watt model, whereas the stock power adapter appears to have been a 45 watt version, but this should neither have contributed to my current problem, nor caused any damage to the computer whatsoever
    2) The computer is unable to be turned on without being unplugged and removing the battery first. That is to say, after an unsuccessful boot attempt I must remove then replace the battery in order to try again.
    3) The battery is not defective, and is capable of holding a charge
    4) The screen was replaced at some point in the last 2 - 3 months
    5) I have read of a similar problem occurring with Macbooks that have had a new hard drive installed, but as far as I can tell the hard drive in it is the stock 160GB one that came stock with the computer
    Thank you for taking the time to read this post, and for any advice or help you can provide.

    Despite nobody having answered, I'll keep updating.
    I noticed today that as well as having to remove the battery each time before trying to start the computer, it also will not start if the power adapter is plugged in.

  • Satellite P100-347: Blue screen appears on start up - unable to boot volume

    Recently I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, preinstalled with media centre 2005 edition, and now it fails to startup.
    During the startup process eventually a blue screen is displayed for about a second and then it shutsdown (I manged to make out the words "unable to boot volume" from the blue screen).
    I tried booting with an XP media centre DVD but it only gives me an option of reinstalling the OS with a price of losing all my very important data. Normally I would have recovered the system but I don't want to lose my data.
    Is there anything i can do other than taking it to a technician?

    Hi
    Well, mostly the BSOD appears due to a hardware problem or serious software issue.
    In your case the software problem is possible
    Unfortunately, I think the new OS installation is the best way to get the notebook running correctly.
    Now you want to know how to save the data and files well, I think you should remove the HDD from notebook and should try to connect the 2.5 HDD via external USB controller to another computer. Then you could save the files on the other HDD
    I think, now you know that the regular backups are important and necessary!!!!

  • After installing Mavericks, my laptop no longer boots.

    After installing Mavericks, my laptop no longer boots.  How can I restore it using the internet, or get it to start up again?
    Thanks in Advance.

    If a SMC reset does not restore life, make an appointment at an Apple store genius bar.
    http://support.apple.com/kb/HT3964
    Ciao.
    You might also look at this:
    http://support.apple.com/kb/TS1367?viewlocale=en_US
    Message was edited by: OGELTHORPE

  • Hp laptop won't boot up

    My daughters laptop won't boot up the automatic repaire screen comes on then just goes off and try's to reboot on loop won't do anything

    @Neilco15 ,
    Hello and thank you for posting on the HP support forums.
    Firs thing you will want to check for is any blinking LEDs on your system.
    Here is a link to check out.
    Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
    Please post back with any results.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Hp laptop can't boot

    My laptop can't boot after connecting it to a flatscreen using an HDMI cabble, any help…

    Hi
    please chk for the output options
    >>hold the windows button and press P
    >>if its winows 8 ctrl+C  you have a option  for share select project
    Connecting a TV
    Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
    I am an HP employee

  • Hp laptop doesn't boot with wifi module

    Hi,
    After I changed the motherboard on a hp pavilion g7 laptop i realised that it only boots if the wifi module is out. if i put the wifi module in the laptop won't boot. it starts and remains at a black screen. if i plug the wifi module after booting into windows the laptop works fine even with wifi.

    Hello Deebw,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook does not boot when the WiFi module is attached on your new motherboard, and I would be happy to help you in this matter!
    For further assistance, I will need to know:
    The part number for you wireless module.
    If you replaced the motherboard yourself, or if it was serviced in an HP Center.
    The Product and Model Number of your notebook computer.
    The version of Windows you have installed on your computer.
    If your computer has completed all of its important Windows Updates.
    If you have updated your HP drivers using the HP Support Assistant.
    If this is an on-going, or recent issue.
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HP laptop won't boot at all

    My one and half year old Hp 2000 laptop won't boot at all. When I press the power button, it doesn't show any sign of life at all.
    I have tried Hard test several times yet it didn't fix it.
    Battery charges, power adapter working.
    I have also tried to boot using the AC adapter alone yet my precious laptop isn't showing any sign of life.
    Please how do I fix this? I need to do my assignment and prepare for my exams, and I can't afford a new laptop. Not when the current laptop is pretty new.
    Please help me HP support.
    Thank you in advance.

    Hi @Chichiiii ,
    Thank You for your inquiry.
    I understand that when you power on your notebook it is unresponsive.  You did state that the AC adapter is working and the battery is charging.
    Here is a link to HP Notebook PCs - Computer Does Not Start (Windows 8), which has multiple links to help you determine the issue.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Laptop unable to 'communicate' with hp 3050a printer wirelessly

    laptop unable to 'communicate' with hp 3050a printer wirelessly, could it be the virgin superhub? (been on the phone to Virgin for an hour they said not their problem) i can eprint and print  using a usb cable. Printer displays 'connected' message.
    OS windows 7 64 bit. Tried uninstalling etc, 11 hours on still no joy!

    Hi,
    Did you try HP Auto Wireless Connect?
    1. Restore network defaults from the printer front panel. Wireless>Wireless Settings>Restore Network Defaults.
    2. Download the printer software, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-93470-1&cc=us&dlc=en&lc=en&...
    3. Before you run the sofware, make sure you computer is wirelessly connected to the Virgin and that the connection is a saved profile(automatically connects). You can check this in the Manage Wireless Networks section of the Windows Network and Sharing Center.
    4. Run the software and select the Wireless connection option.
    5. Select Yes to run HP Auto Wireless Connect.
    Please click the blue Kudos star in the post that resolved your problem. Doing so will help other forum members find their solutions too.

  • Unable to boot from cloned MacOS 10.6.8 server

    Hi there,
    we've successfully restored a MacOS 10.6.8 server image to an Intel Xserve. However, there seems to be a boot cache issue. Sometimes I am unable to boot and MacOS Server won't restart. The Xserve restarts twice on the gray Apple screen. Than it's hanging on the gray Apple screen. no disk activity for minutes. I've waited 30 minutes. I had to power down the server. After that the  server boots normally. no errors in verbose mode during startup.
    I am using 3 volumes (all 3 using the same system clone). All Bay drives using the original Apple Disks. They are brand new. <29 hours.
    Resetting the NVRAM a couple of times didn't solve the issue. The booting error is reproducible. This system runs fine and it's really clean. I just installed the latest MacOS 10.6.8 combo Update
    I don't know what else I can I do? I really appreciate any help on this.

    Sorry for the delay in responding.
    Thank you, Peter. The Xserve running fine so far. We've had any boot issue.

  • Envy DV7 laptop will not boot without the power cord being connected

    My laptop won't boot on its own even when the battery indicator reads "fully charged (97%). If I have the power cord plugged into the computer (and the wall), it boots right away. Without the power cord, the "power indicator light" flashes once, the screen brightens to a lighter shade of gray, then it just shuts down.
    I'm thinking I need to replace the battery but I thought it best to check with the experts first...................☺
    Thanks!!
    ETA..........I just saw the post about power cord failure. My power cord is one of those affected and I will be filling out the request for a replacement. Unfortunately my serial number is apparently located inside the battery compartment. I'm wondering if my cord has overheated and caused this boot problem with my computer.

    Hello, @jksweeney 
    Welcome to the HP Forums.
    I see that your having an issue with the power and your notebook. That you've applied to have the power cord replaced as it was part of the recall.
    Please let me know when that has been taken care of if the issue remains. I will remain subscribe to this thread, so that I will be notified if you post again.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

Maybe you are looking for

  • I have a four year old version of Firefox and it won't let me update to the most recent version. Help.

    Current installed version of Firefox is 2.0.0.4 - 2006. I'm trying to upgrade to 3.6.8; while it will download, I don't get a prompt to drag it into the Applications folder. I think my installed version is so old it won't recognize the new one. What

  • Extend chart of account to company code

    Hi Experts, I have created a chart of account. I want to extend all accounts  to particular company code, as mare assignment of chart of account to comapny code (OBY6) does not allow to use these accounts for this particular company code. Please guid

  • Process Thumbnail upon each adjustment

    Initial speed performances of Aperture 2.0 were quite satisfactory. But now, almost each time I apply an adjustment I have a significant delay. It seems that _it is the thumbnail processing that slow down Aperture_. Each time an adjustment I made is

  • Display Work Schedule in ESS

    Hello, I am trying to provide the same functionality that PZ17 transaction (Display Work Schedule) provides in the backend, to the portal. The transaction PZ17 does what I want essentially. Now the problem I have is how do I make it come up in the po

  • Very slow mac after installing yosemite

    I have already tried all the online tips (like turning off transparency etc) but nothing works. I have also run Etrecheck and will include the report: Problem description: Mac very slow after installing yosemite EtreCheck version: 2.1.8 (121) Report