LAPTOP VAIO SVT15112CSX audio drivers that work with windows 10

Upgraded to Windows 10 (7/31/2015) VAIO SVT15112CSX but the audio (sound qaulity) was horrible.  After some trying I found that installing the Windows 8.0 audio drivers from the Sony Support area for the latop made the sound work great again. I installed the patch (1) then rebooted. After that installed the audio driver (2) (not sure if you have todo it that way, but it worked for me).  Everything else appears to work fine so far.  :-) Support area: http://esupport.sony.com/US/p/model-home.pl?mdl=SVT15112CXS&LOC=3#/downloadTab Files from win8.0 64 bit:  (there are no audio files in win 8.1 64 bit area).Description of files:(1) File DescriptionAudio Driver Registry PatchRelease Date2/01/2013Version2012 10/15File Size1.00 MBDOWNLOADThis utility installs the originally shipped version of the Audio Driver Registry Patch. (2) File DescriptionRealtek® High Definition Audio DriverRelease Date1/03/2013Version6.0.1.6695File Size132.26 MBDOWNLOADThis utility will install the originally shipped version of the Realtek High Definition Audio driver.

 
Hi condor, 
Welcome to Sony Community! 
I believe the right model name of your unit is SVT15112CXS and not SVT15112CSX. Based on eSupport website, the drivers and software for Windows 10 will be released on November 2015. Those drivers are specifically made for Windows 8, but I am glad that it works well with Windows 10. You may stick with these and wait for the updated drivers once released and install on your laptop. 
Thank you for posting your experience condor.  You post might be very helpful to other users experiencing the same issue. I'll bookmark this thread for future reference. 
Best regards,
Vincent 
If my post answers your question, please mark it as "Accept as Solution"
 

Similar Messages

  • I would like to buy a HP printer that works with Windows 8 preview.

    Understand that HP will not release drivers for existing printers until August at earliest and that is OK....I have 3 HP Laserjet 1020s that have been great and will buy a new HP printer if it will work now with Windows 8 preview.  Any suggestions or any fixes/patches for 1020 that work.  Also interested in any non-HP printers that work with Windows 8 preview?  Prefer HP but will buy first printer that works from any mfg. as I would like to give Windows 8 a real try.   Believe HP is missing boat by not putting a patch out for some of their printers as soon as possible as I am not the only HP user looking to buy any printer that works with Windows 8.

    JohnW just posted this...should take care of your issue
    http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...

  • External audio controllers that work with FCP

    Is FCP cabable of working with external audio control interfaces such as the kind that work with Logic?
    If so, any recommendations on which ones work well?
    Cheers,
    Jesse.

    take a look at the Mackie MCU (control surface only) or the Tascam FW1082 (control surface/mixer hybrid)
    ... or any product that support the Mackie Control protocol or Logic Control should work.
    smaller, interesting interfaces at the moment include
    the FireOne http://www.tascam.com/details;8,14,104.html
    and the AlphaTrack http://www.frontierdesign.com/Products/AlphaTrack
    larger more extensible setups would include
    the Tascam FW1884 http://www.tascam.com/catalogue;47,14.html
    with additional FE-8 units for up to 128 tracks http://www.tascam.com/products/fe-8.html

  • Drivers that work with 4 gig of

    Can Creative give any indication of when they will release a set of drivers that work properly on a system that can address 4 gig of ram please. As memory prices are currently so low there are a lot of users migrating to Vista 64 so they can use 4 gig of ram or more so I was wondering when Creativie will stop embarassing themselves with the current drivers that they have and actually address the 4 gig ram issue. I know a lot of users don't have a problem using 4 gig and a creative card but I also know an equal number do and I'm willing to bet the users that don't have very few pci or pci-e devices in their machines. From what I can tell if you have several pci or pci-e devices then the creative drivers crap out - probably because they are pushed beyond the 32bit address space. Please creative fix this URGENTLY - it's not like I'm the first person to complain about it and you can only deny it for so long, you really are embarassing yourselves by not addressing this issue!

    Ok I guess I should probably have included some details of the problems instead of just ranting. The problems I am seeing on my system are as follows.. - using the new drivers with 4gig in vista 64 just produces constant static (very loud and much like an untuned TV). Remove 2 gig and it works fine - or remove all other pci / pci-e cards and it works fine. 2 - using the previous drivers occassionally work. That is they will work most of the time but after rebooting the sound will occassionally vanish. The drivers will still be installed and the device listed as working correctly in device manager however there will be no sound. At this point you have to either remove 2gig of ram or resinstall the drivers to get sound working again. I am pretty sure that the problem is with either the creative drivers or the x-fi card itself because?I have?seen?plenty of?posts from other?users suffering with similar problems . For reference my motherboard is an Asus P5B Deluxe, I have an Nvidia 8800GTS card in my primary pci-e slot, a hauppauge nova t-500 tv card in one pci slot and the creative x-fi in another pci slot and am using?4gig of Geil DDR2 ultra ram with a core 2 duo 6600 processor. I have tried moving the x-fi card to a different pci-slot and this makes no difference, I have tried using a different brand tv-card in a different slot and this also makes no difference. It does appear to me that the drivers have major problems when pushed to use a certain part of system memory - hence the reason it works when there are no other expansion cards in the sytstem (or 2gig less addressable space and no need for any bios memory mapping to take place). I hope that better explains the problems. P.S. I realised when I made the post that there would more than likely be replies stating 'works for me' or 'I have no problem'. If it works for you with similar hardware configuration then great there is still hope that I can get my system working correctly.

  • HELP....ne​ed a good sound card that works with Windows 7 64 bit

    I've searched the internet and I'm seeing that folks are struggling with getting sound cards to work with Windows 7 (particularly the 64 bit systems). I know there are stability issues with the 64 bit system but I'm looking to install a decent sound card to improve stereo sound from my HP Pavilion (h8-1260t). The onboard sound is OK, but I'm looking for higher fidelity and the shortcomings of the stock sound chip is noticeable when played through my hi fi system.  Don't really need 'surround sound' (I'm not a gamer) but I'm assuming any card that comes with this feature will also produce a quality stereo signal.  I also like to archive music from steaming sources and have found a significant loss of sound quality once the track is saved.  I'm assuming a good sound card will help with this.  Any advice would be greatly appreciated.

    Spauld, welcome to the forum.
    I suggest finding a sound card that you like and contacting the manufacturer's Customer Service to assure its compatibility with Win7 64-bit.  They are the experts on their products.  While I am not a fan of dedicated sound cards because their drivers are conflict prone, I would buy a Creative Soundblaster.  They have been proven over time.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Mics and audio interfaces that work with Camera Connector

    FYI: After playing with the Camera Connector I have been able to connect USB recording gear for use with MultiTrack DAW app on the iPad. The Blue Yeti, Samson's GTrack and Roland's Cakewalk Audio Interface all work for inputting audio. All three have internal headphone jacks which work for monitoring both the input and multitrack recordings.
    One caveat with the Yeti: it appears to be almost at the limit of the power that the iPad's USB Camera Connnector can supply. Some headphones and earbuds shut down the mic. Sennheiser HD280 phones work fine, but some of the Sennheiser buds don't.

    It has been reported before that a lot of USB audio devices (e.g., headsets, microphones). As an example see:
    http://www.electronista.com/articles/10/04/24/ipad.has.native.usb.support.for.ma ny.devices/

  • Audio INTERFACE that works with Garage Band??

    Any suggestions for a good inexpensive audio interface? Fast Track is awful.... Something about 250 or under?
    Want to plug guitar into device, device into MAC - and lay down tracks.

    ZoohGirl wrote:
    Do the second two in the top row work with Garage Band
    there isn't such a thing as "working with GB", if it works on a mac it will work with GB
    and ProTools?
    i know very little about protools, though they tend to be more proprietary
    can we plug them in (to guitar and MAC) and roll?
    yes
    Or is a mic needed??
    "needed", no. there are both 1/4" as well as XLR jacks, as you can see in the pics. you can use either.

  • Hp printer drivers that work with 10.9.4

    I had a new hard drive installed on my iMac with OSX 10.9.4. It then would not print to either the HP psc 2510xi Photosmart (USB cable) or the networked HP Officejet 7000, both of which had worked with 10.9.2. I downloaded new drivers from HP and Apple: HP Printer Drivers v.2.26.1 for OSX. When I try to Add a printer I get the message: Can't install software because it is not currently available from the Software Update server. HP support labeled my Photosmart obsolete and sold me an Officejet Pro 8100. Same problem even though it came with a CD with printer drivers. Same messages.

    Do you have a backup of your HD made prior to the drive failing?  If so go into the HD/Library/Printers folder and copy the "hp" folder into the same location on your new hard drive.
    Reboot, go to the System/Printers & Scanners preference pane, remove the printer and add it back again. 

  • I have some expensive programs that work with windows, would they work with the Mac

    I have always had windows and I have some expensive programs that I like to work with and was wondering if they would work on the IMac.  I have been considering changing for years but someone said my programs wouldn't work with Mac.  I have IPods, IPad and IPhones, so I am a little familiar with Apple

    No, not unless you install Windows on the Mac.
    A Windows app needs Windows. An OS X app needs OS X.
    You can install and run Windows and Windows apps natively on an Intel Mac.

  • HT3669 I am looking for a Printer which has the "Booklet" option built in with drivers that work with os Mountain Lion 10.8.3

    I need the booklet option on a printer (laser or inkjet) but am unable to find with a driver for my imac os10.8.3 

    So from your post I would assume that you have a file consisting of separate pages, such as a eight page Word document, and you want to be able to print this as a booklet. Do you want the booklet folded and saddle stitched as well?
    I've seen this facitlity on copier-based office devices that have a mechanical saddle-finisher/booklet unit. But I have not seen a consumer product with the same.
    If you are happy to fold the printed pages into a booklet, and you don't have more than four pages so stapling is not necessary, then there could be software available that will change the page order and print the individual pages in a 2-up mode in the correct order (ie pages 1 & 4 on the outside and pages 2 & 3 on the inside). A quick search found Create Booklet for Mac.

  • Unable to get Saffire Pro 26 audio interface to work with Windows 8.1

    Can anybody help with compatibility issues between Windows 8.1 (64 bit) and Focusrite Saffire PRO 26 audio interface? I'm using a Firewire PCIe Card. Focusrite registration page pointed me to an installer called saffire-pro-2.61.exe. This installer times
    out on a page called 'Installing device driver (1 of 2) waiting for the Saffire PRO to be connected to the computer (The Saffire Pro device is connected and a powered up and appears in the Device Manager as a device called Focusrite SAFFIRE_PRO26 which is
    listed under the Other devices section of Device Manager with a yellow exclamation mark which appears to be a catch 22 (after all I'm trying to install the drivers). No answer from Focusrite support (due to holidays). Many thanks for any help you can give
    (particularly if someone knows that it should work!).

    Brilliant. This has moved me on.  I wasn't impressed when Focusrite registration presented me with drivers from 2011. You'll probably tell me finding the latest drivers is easy but somehow I failed to find anything in my panic. I have a second issue
    now (Pro Tools 11.2.2 could not initialize the Saffire) but your response seems to have solved the first issue. Thanks!

  • Is there an HP Toolbox that works with Windows 7 64-bit?

    I run Windows 7 64-bit with HP LaserJet CP1525nw color printer (networked).  I can't get HP Toolbox to work.  I recently tried to reinstall.. but when I try to run it, error message tells me the driver is not installed, which, of course, is not true.  However, on another Windows 7 64-bit PC on the network, Toolbox runs fine.

    Hi Grey_Ghost,
    Try installing the software from the following link and let me know if the issue persists:
    CP1520series_nw_full_solution.exe
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Ipod Nano -Itunes version that works with Windows professional 2000

    Hi - Just purchased a Ipod Nano but I have Windows professional 2000. Is there a version I can download. Thanks Dianne

    THANK YOU, THANK YOU, THANK YOU, THANK YOU!!!!!
    This works great! I was just about to give up when I found your post 2 days ago. I have searched and searched for it again to say how much I appreciate your information. Winamp works just great with my Ipod Nano 3rd gen. and Windows 2000. My daughter is thrilled, and I don't have to resell my Ipod Nano now, as I purchased mine from ebay for x-mas.
    Thanks My Chile friend!
    Cindy in Austin TX

  • Is there a driver for the PXI-8310 that works with Windows 7?

    The only one I can seem to find is for XP.

    Hello LouisTI,
    Unfortunately there is not a Windows 7 driver for the PXI-Cardbus8310, as this is a legacy device which is currently going EOL (End of Life). The XP driver for the 8310 (which you may already have found) can be downloaded here:
    http://joule.ni.com/nidu/cds/view/p/id/370/lang/en
    If using Win 7 is critical, we recommend the PXI-ExpressCard 8360 as a replacement for the 8310:
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/202294
    Hope that helps!
    James M.  |  Applications Engineer  |  National Instruments
    James M. | Applications Engineer | National Instruments

  • Need audio drivers for hp media center pc m7780n that works on windows 7 ultimate 64 bit

    need drivers that works on windows 7 ultimate 64 bit.

    Hi:
    You can download the latest audio drivers from the Realtek site below. Accept the agreement. Download and install the first one on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    Paul

Maybe you are looking for