Laptop won't boot, can't get into BIOS.

I have a Satellite P55t-A5116, with windows 8.1. The other day I went into the Toshiba password utility and set a user password, and when the machine reboots, nothing happens. No sign in screen, no place to enter the password, nothing. I cannot get into the BIOS, having tried holding down the ESC, F2, F8, and F12 keys. I also tried holding down the Fn key plus the F2, F8, and F12 keys. I have tried to boot with my Toshiba System recovery disc ( that might be a windows 8 disc, I made it when I got the laptop in March), or an Unbuntu disc. Below is a screenshot of what I get when the machine starts. Did the BIOS get corrupted when I entered the password? If I pop out the CMOS battery, will that fix it? Any help and suggestions is much appreciated.
Attachments:
image.jpg ‏966 KB

I'm not sure how setting the password would cause this. You might want to try these suggestions:
What can I do if my Windows 8 laptop won't start?
- Peter

Similar Messages

Can't get into BIOS mode

** i also put this question in O.P. topic, because i think that was the wrong one**
1. Type of computer - HP ENVY dv7-7250nr
2. opporating system- windows 8 64bit
I recently got this computer. It's amazing the only thing that could use a change is the keyboard. I got this as a gaming PC but the function keys can only be accesed when pressing FN. In most computer games the f# keys are your shortcuts. When i go to press mine i have windows changed and the control panal pops up.
So i was looking around and they say you can go into BIOS mode and turn off the hotkeys. Only issue is i can't get into BIOS mode.
I would really appreciate some help on this, i don't want to go out and key a whole-nother keyboard.
Thank you in advance.

Princess.
Turn on the laptop then tap f10.
That should get you into the BIOS.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Z68A-GD55 can't get into BIOS anymore

Just built new Z68 computer gradually over 3 days. Then loaded applications and everything worked great for 2 days. Decided it was done and time to change boot priority in BIOS. Couldn’t get into BIOS. Got splash screen but no further.
Found forum message recommending CMOS reset. Tried button, jumper, remove battery methods. Still can’t get into BIOS. Get BIOS Prompt ("...press DELETE"), but nothing after that except flashing cursor top left of screen. Back to barebones; same result. Screen messages before BIOS prompt: 98, 99, A3. Will not boot MS DOS (Win98 version) from USB drive (would before). I’d appreciate any suggestions. Thx.
Key build steps:
• Ran Memtest barebones 48 hrs.
• Added SSD (ACHI) and Installed Windows 7 Pro. SSD was new.
• Added, formatted HDD
• Enabled multi-monitor in BIOS; added Radeon HD6870; 2 monitors on Radeon, none on internal; installed Radeon drivers.
• Enabled Virtu in BIOS, d-mode; Installed Virtu
Not overclocked.

After replacing the PSU with a Corsair TX650M (650w, 3.3v30A, 5v30A, 12V54A), the barebones config could access the BIOS. Installed everything except boot SSD; still OK.
Before letting the computer boot back into Win7, I connected two old 19" LCD monitors (Microtek C997SD). For setup and testing, I had been using a 24" widescreen. But Win7 had never seen anything but the Microteks, which I intend to use with this computer. Tried to enter BIOS to verify settings were still correct for SSD. Got splash screen -- regular BIOS background, but no Icons (Green Power, Utilities, Overclocking, etc.). Computer locks: PS/2 keyboard (incl. Ctrl-Alt-Del) and USB mouse, do nothing.
Connected widescreen, verified BIOS OK. Shut down and reconnected Microteks, attempted boot into Win7, and all was OK. I just can't use a Microtek to access BIOS.
I hope MSI recognizes how valuable the volunteers here are. Your advice solved the problem at least a couple of days earlier than I would have done on my own. Thank you.

MSI 870-G45 - Can't get into BIOS

So, just built myself a new pc.
It posts, and I have some output on the screen upon boot up, like I see that its detecting my sata hd/dvd drive and everything. Like the topic name says, I can't get into the BIOS. When it posts, its detecting my keyboard and everything, but it simply hangs at the post screen and I cannot get into the BIOS at all for whatever reason that is beyond me. I've tried 2 keyboards, one ps/2 and a usb keyboard, nothing on either (the usb is one I went to wal-mart and got today as I guessed the ps/2 wasn't working correctly or whatever).
Tried clearing CMOS (taking out the battery, resetting the jumper and everything). Still got nothing.
Heres a link to a pic of what output I do have. http://img858.imageshack.us/i/img20110313152042.jpg/ (sorry, don't know how to embed pics into a forum board, not that familiar)

Quote from: littlemanx23 on 14-March-11, 13:10:00
I mean, I'm using a usb keyboard. Should I try a PS/2? I mean I've tried clearing the CMOS a handful of times to no avail, nothing. It just simply hangs at that screen and says CMOS settings are wrong.
I thought you said you'd already tried a PS/2 keyboard and it still hangs?

Can't Get Into Bios.

Hello:
After putting together a new system and installing windows I ran MSI's update util. The first thing I updated was the bios. I did a windows flash. It made the recovery disk and flashed the bios. The machine would not boot after this and I followed the recovery process. Now I can't get into the bios. After the first beep when posting I hit and the machine just hangs. I'm really not sure how stable my system is now. After the recovery I ran the update util again and tried to install some Intel Inf files and after copying 90% the machine hung. I was thinking about re-flashing and re-installing windows.
Thanks In Advance,
Steve Dessent.

Can you post the details on your setup - board, video card, power supply, etc.
And can you clarify where you know stand. If I understand this you flashed to a new bios version, were unable to boot, and you restored the old bios, and are able to boot. Have you gone into the bios to make changes since recovering?

Razr M won't boot - can I get my pictures

My Razr M won't boot - it keeps hanging at the red eye. I've tried all the reboot options short of a factory reset. Before I do that I'm wondering if there is a way to get my photos off the internal memory. I've tried connecting with the USB but it doesn't recognize it since it won't power on. Any way to do this?
Thanks!
Toni

Were the photos backing up to Google drive or any other cloud storage? If they are only on the phone, you may be out of luck... (I have my photos set to auto backup to cloud whenever I am connected to wifi - so even if I lose a few, the majority of my photos and videos are stored in the cloud as well as my phone.)

Strange messages on boot, can't get into system

My computer was ~1 month unbooted and `pacman -Syu`d couple of times at this time. Now at boot it spits out strange messages like this:
(handwritten so there may be typos)
isapnp: No Plug Play device found
Serial: driver ports IRQ sharing disabled
serial : ttyS at I O x f irq = is a NS A
serial : : activated
: : ttyS at I O x f irq = is a A
input: Macintosh mouse button emulation as class input input
PNP: PS Controller [PNP :PS K PNP f :PS M] at x x irq
i c: Detected active multiplexing controller rev
serio: i KBD port at x x irq
serio: i AUX port at x x irq
serio: i AUX port at x x irq
serio: i AUX port at x x irq
serio: i AUX port at x x irq
I was able anyway to boot into my system with Arch LiveCD (kernel 2.6.20) giving kernel root=/dev/sda3 option at boot. I tried compiling 2.6.27.1 and using this new vmlinuz and kernel img (made `oldconfig` from newest livecd /proc/config.gz) , but problem persists. Is it somehow related to I8042 controller? I've set CONFIG_SERIO_I8042=y.
I have also tried adding acpi=off, noapic and irqpoll kernel boot parameters, and with acpi=off I get into
(handwritten so there may be typos)
bus: index io port : [ ffff]
bus: index mmio : [ ffffffff]
*CUT*
NET: Registered protocol family
IP route cache hash table entries: order: bytes
TCP established hash table entries: order: bytes
TCP bind hash table entries: order: bytes
TCP: Hash tables configured established bind
TCP reno registered
NET: Registered protocol family
Trying 2008.6 LiveCD's "boot into existing linux system" reverts into same problem.
So I got no more ideas.
Last edited by femc (2008-12-16 02:40:39)

Yes

Can't get into BIOS on K7N2G-ILSR 6570G

Yesterday I tried to get into the BIOS like I always had done, by pressing delete on start up. I tried numerous times, and for some reason, no luck. I then posted on techguy.org. Someone told me to get a BIOS flush utility from the MB manufact. I went to the website but couldn't find anything that looked like that. Can someone tell me what to look for, and why this may have happened in the first place.

I have spent the last 2 hrs with this computer. I finally tried a different keyboard after I had cleared CMOS and then it wouldn't let me press either del or F1. I was stuck, so changed keyboards and now everything is fine. I also managed to clean all the components and dust it out good while in there. Thanks for your help. I'm back in business!!

Can't get into BIOS on new Z97M-G43 Mobo

I just received all the components (below) for a new build. When I power the system up, I get a screen with the following:
EFI Shell Version 2.31 [4.633]
Current running mode 1.1.2 Map: Cannot find required map name
Press Esc in 5 seconds to skip startup.nsh, any other key to continue
Regardless of what I do, I cannot get into the BIOS. I have tried clearing the CMOS using the procedures documented here on the forum - both removing the CMOS battery and by using the jumper, both with the power off.
I removed all non-necessary connections - USB, HDD, DVD. The only things connected are power and the front panel power, reset and LED.
When I remove 2 of the 4 memory modules and restart, I get a message saying that the CPU or memory changed and to press F1 to go into setup. When I press F1, I only get a black screen. I also get a black screen if I press DEL repeatedly after turning on the system.
I am using a HDMI connection to my monitor.
What is the magic to get into the BIOS, or does this suggest something is wrong with the Mobo?
Many thanks!

Quote
Regardless of what I do, I cannot get into the BIOS. I have tried clearing the CMOS using the procedures documented here on the forum - both removing the CMOS battery and by using the jumper, both with the power off.
remove power cord from the PSU 1st
then do >>Clear CMOS Guide<< and retest
Quote
MEM: GSkill 4x4gb F3-14900CL9D-8GBXL
also try with 1 memory stick only

MSI GE70 2OE Can't get into bios after update

Hello
I had some problems with the intel turbo boost not working properly so I updated my bios with the new version from 2013-09-03. After this update the intel turbo boost works fine but since I can't access my bios anymore. Does anyone have a solution?
Thanks

Problem solved. It seems that after the update you have less time to press delete to enter the bios.

ThinkPad E330 can't get into BIOS anymore

I tried to install Ubuntu on a Thinkpad E330 that had Windows 8 preinstalled, from a USB key. It was a 32 bits version of Ubuntu, just for a trial. I accessed the EFI bios from W8, shifted to legacy BIOS mode and installed Ubuntu w/o any problem, on a set of separate partitions. Works like a charm (although I would like to shift to 64 bits).
The problem is that I would now like to go back to EFI mode to access W8 and install a 64 bits version of Ubuntu for EFI but I cannot access the BIOS anymore to put it back to EFI mode. Although the screen says "press F1 key to enter BIOS" or "Press Enter to interuupt normal boot process", the F1 Key does not work, the Enter key does no better.
I found plenty of posts of people in a similar situation, that tried to clear CMOS (does not work) and all ultimately point to the user "someotherguy" that apparently saved them. I tried to pm him but he does not react to my private messages.
Is there anybody else that could help me here ?
Thanks
Thomas
Solved!
Go to Solution.

For those who like me could not access their BIOS because they put it in Legacy mode:
I must first thank someotherguy for his help.
After different trials, the success was reached by opening the thinkpad (3 little screws) and the CMOS battery. The reboot gave me access to the BIOS and I shifted it back to UEFI mode and thus regained access to Windows 8 (and therefore to the BIOS again).
I will now proceed with Ubuntu installation...in UEFI mode (as I intended initially but did not do because I has a 32 bit version of ubuntu already on a USB key).
Thomas

Dv9000 series - how to get into BIOS

How can I get into BIOS and how can I re-dedicate graphics memory-use there? (Maybe my other's post was too special...)

Oh, THAT's interesting to learn that chances are high, they either changed the whole mobo, or the system wouldn't run stable with damaged graphics memory...(An ugly one: would it be worth exchanging the mobo and do all that counterfeiting data just for the value of the old mobo???) Here's what I found so far: (I used "SIW System Information for Windows"-tool to get the following data, among a lot of other)- Serial-# matches my serial-# as per the original packaging, paperwork and bottom of the machine- Model 103C_5335KV (another way to denote the model KP964EA/dv9787eg?)- NVIDIA 8600M GS with (only) 256MB DDR2 64bits- dedicated video memory 239MB (251199488)- dedicated system memory 0MB- shared system memory 1279MB (1341353984)- Mobo is a Quanta 30CB 79.2E (no serial-# found/supplied by SIW!) I will check the hardware again by "reading out" data with Fn+Esc and/or CPUZ and GPUZ and report back (as said, I think the info there said KP964EA already - just to make sure)... Just for the guessing or "narrowing the problem down":IF my system was running on 256MB before already (and hp advertised wrong data for my rig) - so no change there - what else might cause my games running roughly now and be a reason for the dropped performance-index in windows?Possible that the graphics chip is able to perform with 256MB only and I would need another version of the 8600M GS which IS able to make use of the 512? (Guess no, as the above info TELLS me that there is only 256MB - and no 512MB - available, right?)CAN that be related to some software or driver?Would/might setting up windows anew (or changing from Vista to 7 for that matter) might bring me back to speed? Anyway, let me tell you that I VERY much appreciate your help on this - I am kind of lost on my own here, and I will try whatever I can to get back my "old" great-performing machine.

My laptop won't boot-up,won't let me get to the boot menu . can anyone help me,please.

Laptop won't boot-up,won't bootmenu.

Hi Willrobb1,
I understand your computer will not boot up. Restart your computer and keep press F9 to open the "Boot Menu" or "Boot Device Options". Press Enter to continue.
Here is a document on system restore if you need it. You can restore it to a previous point when it was working correctly.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5218386&tmp...
Hope it helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work?

I have an iPod nano 6th generation and I downloaded 3 music videos but they won't play on my iPod. They only play on my laptop/iTunes. How can I get it to work? I know that my iPod should take music videos because there is a pre-made playlist called "Music videos". Can anyone help me please????

You can sync the music videos, but they won't play on your 6G Nano, because it does not support video playback. Sorry.
B-rock

Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

Thank You. This helps me alot to get into the masters and to see events and photos in a utilitarian way, but it is not as easy as viewing the normal iphoto format to find photos. Can I do something else or did I not do something right to not see normal iphoto in Time Machine ?

Laptop won't boot, can't get into BIOS.

Similar Messages

Maybe you are looking for