Larch-4 testing, can also 'livify' existing Arch installation
I've uploaded a testing repository for larch-4 to:
ftp://archie.dotsrc.org/projects/archie/larch/testing
It has some added features which need testing - especially with USB, which is difficult for me to test because my computers are rather old and don't support USB boot.
It should now be possible to adjust the session-saving behaviour without modifying the larch scripts - additional scripts (hooks / event-handlers, call them what you will ...) can be placed in a 'scripts' folder in the root directory of the boot device (using the profile mechanism) to adjust loading and saving of overlay files. Initial description (sorry, it's still rather sketchy) in the session-saving doc page.
The home directory is now a separate sqf (not overlayed).
Added options to mklarch to build a CD/USB-stick from an existing Arch installation. This can be done, for example, from a live CD (using the -x option) or even from the system itself while it is running (option -X). This could be rather dangerous - don't do it on your main installation. I've tried it out - without obvious damage - on a test installation, and it looked quite promising, but be careful.
Added option -r to mklarch to ensure regeneration of base and system sqfs when 'reusing' an installation (with options -b, -x, -X).
Changed the place where the live CD is built (default /home/larchroot) and the structure within this folder. The installation is now made directly to this location and the building is done in subfolder .larch, where the final iso also lands.
To use it, just copy the larch-setup.sh script to an empty folder and run it (as before). Then you have the new mklarch set up and ready to go.
Feedback welcome.
spookykid wrote:
Hi gradgrind, this tool is really what I'm looking for. I have 3 partitions: /dev/sda1 -> swap; /dev/sda2 -> reiserfs (partition where my system is installed); /dev/sda3 -> reiserfs (partition where I'm running mklarch script). I want to try larch but I have a few questions.
1) To create a LiveCD from my current arch setup I only need to run
./mklarch -X
If you're running the system you want to save, yes. But from your description it sounds like you're doing something else. Do I understand correctly that you have some other system unrelated to sda2 on sda3 and you want to run mklarch from sda3? And what you want to livify is sda2? Then you need to do something like:
# mount -o dev,exec /dev/sda2 /mnt/sda2
# ./mklarch -x /mnt/sda2
Note the small 'x'.
spookykid wrote:2) Is it possible to add gensplash to larch?
Sorry, I have no idea about gensplash. If it's supported by Arch then it should work with larch too, but it's not something in which I have any interest.
spookykid wrote:3) For what I've read about larch I can have a system installed with 4 GB and that will fit on a 700 MB CD?
I hope I didn't write that. You might need that much free space to build a 700MB CD, but a more accurate estimate of what fits would be about 2GB. If you want more you'll need correspondingly more free space and a DVD or a large USB-stick.
spookykid wrote:4) Larch will only go for my /dev/sda2 partition (where i have my system) or will it add all available partitions to the live image?
It just packs up what it finds at the mount point, so if you've got other stuff mounted within the system (I guess in your case you probably haven't) don't be surprised if it tries to pack that up too. I think (I hope!) it ignores stuff mounted within /mnt and /media, but I'd have to look at the code again to be sure. For people who have /home or /var or whatever on separate partitions it is necessary to mount these before running mklarch.
If you use 'mklarch -X' (big 'X') to build a live CD from the currently running system, all the mounts should be ok anyway, but I think that in general building from a separate system, as you seem to want to do might be slightly safer.
In any case, please back up anything important before running mklarch - just in case! It runs as root and could do all sorts of nasty things. I don't think it will, but don't blame me if it feeds your grandmother to the ravenous bugblatter beast of Traal
Similar Messages
-
Install windows 8 on an existing arch installation
Hi Friends, I don't know if this is the correct place to ask but after many hours of googling, I am asking this question. I had two operating systems installed on my computer which I dual booted with grub: Windows 7 and Arch linux (Archlinux is still intact on my computer). Windows 7 got corrupted with virus and now it has become unusable. so, I decided to install Windows 8 in place of it. so, Friends, can Windows 8 be installed keeping the arch installtion safe ? Has anyone tried this method in which is linux is pre-installed and you have to install a new version of windows. I dont want to lose my arch linux installtion. If you want more information about my system partitions , I am willing to give it to you.Please Help.
I searched on Internet but found only the installation methods in which windows is installed first and then linux is installed. Many thanks.
Last edited by Pranavg1890 (2013-05-24 20:32:37)Thanks Friends for your Replies.
But I think Somewhere I read that Windows Detects the linux partitions as unusable and formats them too. so, can anyone give me a confirmation for this?
My Partitions are as follows:
/dev/sda : ( 500 GB Hard-disk)
1) /dev/sda1 : System Reserved ( Windows 7 ) (100 Mb) (ntfs)
2) /dev/sda2 : Windows 7 ( Actual windows 7 installations) (362 Gb) (ntfs)
3) /dev/sda3 : Arch-Root ( actual arch linux installation) ( 50 Gb) (ext4)
4) /dev/sda4 : Extended partition in which the below partitions are included
/dev/sda5: Arch-Home ( seperate home partition ) ( 100 Gb) (ext4)
/dev/sda6: Swap Space ( 2 Gb ) (swap)
/dev/sda7: Arch-Boot ( grub is installed on this partition) ( 500 Mb) (ext4)
Please can anyone give me re-assurance for what I want to do. Cause Installing another operating system is a big step unless and until you unterstand follow it clearly.
Also, will I be able to boot Arch-linux from win 8 boot loader conidering my partition set-up ( To be specific , I want the Win 8 BootLoader's Mouse and touch funcionality)
Please Guide me step by step.Many thanks.
Last edited by Pranavg1890 (2013-05-24 21:22:09) -
Suggestion to arch installer...
I'm a newbie to arch. I just moved debian/ubuntu to arch, but I'm not a distro hopper. I'm now fascinated to arch, but I'm also frustrated to arch installation system.
I don't care installing os by console(ncurses). It's quite simple and efficient. I often installed debian/ubuntu in this way previously.
My suggestion is
1. partitioning
after cfdisk and we go through /arch/setup. Yes! "kiss" principle is important. Everything should be simple. but, we might lose "integrity" in the view of installation. cfdisk - partitioning (format stuff) - editing /etc/fstab the separated steps also make sense to me. However, in my opinion, will it be better that they merged into one step? I'm a newbie That's why I didn't find the way to keep(preserve) the previous partition. Whenever I tried to mount ie. "/home" it just formats. I solved this problem to skip the step, not to mount, and I edited /etc/fstab at the end.
2. choosing packages
we can choose base/base-dev packages. I love this because it provides the way to build the really minimalistic system. About 100 packages, I think most of people can't memorize exactly what they are, what they do. Will it be better to show short description like which utilites are installed, which daemon works, what they do... I believe that the user-friendliness during installation doesn't harm the system efficiency or compactness.
I hope the arch keep this way.. however, a bit kinder or nicer...mairoo wrote:Dieter@be, Thank you so much! It's really helpful. I answered "no" and it really worked what I thought. I'm not good at English cuz my mother tongue is Korean. I hope the feature-request FS#13040 is accepted sooner or later. the way of curses menu during kernel compile could be a good model. Finally, I hope "the menu" could be a bit more /intuitive/ for poor english skilled people like me.
So, you tried again, you answered 'no' to the 'recreate?' question and this allowed you to choose a mountpoint and it automatically put the needed line in fstab, without overwriting your partition?
Suggestions for better menu's are welcome also. There is also a ticket open for a translated installer (i18n or i10n or whatever it's called), but I'm personally not convinced if it's worth it. It will depend mostly on contributions from other people. -
Autopopulate archiso from an existing archlinux installation?
(not entirely sure this is correct forum section for this, but it's at least closely related)
has anyone created a script to automatically populate archiso with the relevent data extracted from an existing arch installation?
so you can basically clone your current setup to an iso file, ready for live use as cd or usb.
or are there scripts that bypass archiso and can independently create a nicely squashfs'd/lzma'd iso, automatically, from the current installation?
... i want a "and-the-monkey-pushes-the-button" solution.I was looking for the same, so i made a
pacman -Q|cut -d " " -f 1 >packages.list
but to my 'bug' surprise, mkarchiso is unable to locate any pkg i installed from aur.
Is there a way to tell mkarchiso to use local packages?
-EDIT-
I've tried to create .pkgs via bacman and put them in /var/cache/pacman/pkg, but still not avail:
#> bacman caps
#> mv caps-0.4.4-1-i686.pkg.tar.gz /var/cache/pacman/pkg/
#> make all
error: target not found: caps
make: *** [root-image] Error 1
#> pacman -Q caps
caps 0.4.4-1
Last edited by kokoko3k (2011-05-24 07:57:17) -
[Solved] Can't boot into Arch after deleting some partitons
About 6 months ago I installed Arch on a machine that used to run Ubuntu. Had some trouble at the time getting to boot into Arch but somehow managed. Now eventually decided to delete the old Ubuntu partitons to free up some space using gparted. Arch partition number changed from sda12 to sda6.
On rebooting after deleting ubuntu partitions with gparted, I got an ubuntu splash screen and a whole lot of ubuntu boot options. Somehow these were all contained in my Arch's /boot/grub/menu.lst. Arch is all on one partition and no separate boot partition (which I had with Ubuntu - maybe I haven't deleted that and this is the problem?). Will need to check that out.
I can chroot into Arch and did the following -
grub> find /boot/grub/stage1
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+16 p (hd0,5)/boot/grub/stage2 /boot/grub/menu.lst"... succeed
ed
Done.
grub>
The Arch /boot/grub/menu.lst had a whole lot of ubuntu stuff in it but I edited to the following -
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
title Arch uuid
#root (hd0,5)
uuid d15cf4f9-18ca-4ec5-95bc-db0f6f264736
kernel /boot/vmlinuz26 root=/dev/sda6 ro vga=775
intrd /boot/kernel26.img
title Arch hd
root (hd0,5)
kernel /boot/vmlinuz26 root=/dev/sda6
intrd /boot/kernel26.img
I have a bootinfo script which gives the following (from the chroot environment) -
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
sda6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
mount: /dev/sda6 already mounted or sda6 busy
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /etc/fstab
sda4: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.cfg /grub/core.img
sdb1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 417,690 6,554,519 6,136,830 82 Linux swap / Solaris
/dev/sda2 25,414,954 1,465,144,064 1,439,729,111 5 Extended
/dev/sda5 25,414,956 1,360,287,809 1,334,872,854 83 Linux
/dev/sda6 1,360,287,873 1,423,198,349 62,910,477 83 Linux
/dev/sda7 1,423,198,413 1,465,144,064 41,945,652 83 Linux
/dev/sda3 6,554,520 25,414,829 18,860,310 83 Linux
/dev/sda4 * 63 417,689 417,627 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 1,953,523,711 1,953,521,664 83 Linux
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2a95d85a-45fe-4584-88dd-0ee20e651ec5 swap
/dev/sda2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="2"
/dev/sda3 32495e1a-227c-4d23-9f63-b1319def0dd9 ext3
/dev/sda4 d6dc69b0-967d-4886-b62d-8c0d6be06b41 ext3
/dev/sda5 37971286-b8d3-4a1b-9f94-4008288fed6d ext3 data
/dev/sda6 d15cf4f9-18ca-4ec5-95bc-db0f6f264736 ext3 30GB-02
/dev/sda7 eb736131-b558-4404-9b83-7f1e6d9e76ae ext3 var
/dev/sda: PTTYPE="dos"
/dev/sdb1 0e83045d-a0bd-4d36-b61d-bdb905130dc2 xfs 1TB-04
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda12 / ext3 (rw,commit=0)
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1 = swap
/dev/sda1 none swap sw 0 0
# /dev/sda3 = root
#UUID=32495e1a-227c-4d23-9f63-b1319def0dd9
/dev/sda3 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda4 = boot
# UUID=d6dc69b0-967d-4886-b62d-8c0d6be06b41
/dev/sda4 /boot ext3 relatime 0 2
# /dev/sda5 = home
# UUID=670eee83-0a3e-429c-863f-b9ecced9f97e
/dev/sda5 /home ext3 relatime 0 2
#/dev/sda6
#UUID=37971286-b8d3-4a1b-9f94-4008288fed6d
/dev/sda6 /home/ben/Data ext3 defaults,relatime 0 0
# /dev/sda7
# UUID=fdb14ca4-d71d-489f-a00e-6e608770674c
/dev/sda7 /var ext3 relatime 0 2
# /dev/sda8
/dev/sda8 /opt ext3 relatime 0 2
# /dev/sda10 - Arch
/dev/sda10 /mnt/arch ext3 relatime 0 2
# Not sure what this is doing here
# Have commented it out - May be the reason why xbmc and mythtv were crashing on dvd insert and play
# /dev/hda /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /dev/sde1
# uuid appears to be 644406B3570C1846 -> ../../sde1
#/dev/sde1 /home/ben/Data/TVRecordings-1TB01 xfs defaults,relatime 0 0
#1TB-01
UUID=76f3823a-81dc-45c9-a0b7-2bc6c3beb2f8 /media/1TB-01 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-02
UUID=59cbf7a1-7008-40d0-96ed-c6f231823d4f /media/1TB-02 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-03
UUID=0e936800-3c53-4b87-abc8-19be0ffca7f9 /media/1TB-03 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 750GB-02 ext3 Partition
# UUID giving problems, trying with dev
# UUID=c23b9c9a-66fc-4256-9211-73156c1ac64a /media/750GB-02_ext3 ext3 defaults,relatime 0 0
/dev/sde2 /media/750GB-02_ext3 ext3 defaults,relatime 0 0
============================= sda4/grub/menu.lst: =============================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-26-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-24-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-23-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-22-generic
title Ubuntu 10.04.1 LTS, memtest86+
root (hd0,3)
kernel /memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
============================= sda4/grub/grub.cfg: =============================
# DO NOT EDIT THIS FILE
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 32495e1a-227c-4d23-9f63-b1319def0dd9
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-26-generic ...'
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-24-generic ...'
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-23-generic ...'
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-22-generic ...'
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-22-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Arch Linux (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26.img
menuentry "Arch Linux Fallback (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26-fallback.img
#### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
# From Arch grub menu.lst
# (0) Arch Linux
#title Arch Linux [/boot/vmlinuz26]
#root (hd0,0)
#kernel /vmlinuz26 root=/dev/sda3 ro
#initrd /kernel26.img
#Note: With a separate boot partition, omit /boot from the path, (i.e. type set prefix=(hdX,Y)/grub and insmod
(hdX,Y)/grub/linux.mod).
#This introduces the "linux" and "initrd" commands, which should be familiar (see #Configuration).
#An example, booting Arch Linux:
#set root=(hd0,5)
#linux /boot/vmlinuz26 root=/dev/sda5
#initrd /boot/kernel26.img
#boot
###menuentry "Arch1" {
###insmod ext2
###set root='(hd0,10)'
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
###search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UU
ID
###linux /boot/vmlinuz-26 root=635d7d02-3f5b-4af6-9c74-16b2af8cc7fd ro quiet splash # ARCH'S ROOT UUID
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch2" {
###insmod ext2
###set root='(hd0,4)' #= TRYING UBUNTU'S BOOT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch3" {
###insmod ext2
###set root='(hd0,10)' #= TRYING UBUNTU'S BOOT IN HD FORMAT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
### END /etc/grub.d/40_custom ###
=================== sda4: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: initrd.img-2.6.32-22-generic
.0GB: initrd.img-2.6.32-23-generic
.1GB: initrd.img-2.6.32-24-generic
.1GB: initrd.img-2.6.32-26-generic
.0GB: vmlinuz26
.0GB: vmlinuz-2.6.32-22-generic
.0GB: vmlinuz-2.6.32-23-generic
.1GB: vmlinuz-2.6.32-24-generic
.0GB: vmlinuz-2.6.32-26-generic
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
[/quote]
Output of fdisk -l from chroot is -
[quote]Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000b084
Device Boot Start End Blocks Id System
/dev/sda1 417690 6554519 3068415 82 Linux swap / Solaris
/dev/sda2 25414954 1465144064 719864555+ 5 Extended
/dev/sda3 6554520 25414829 9430155 83 Linux
/dev/sda4 * 63 417689 208813+ 83 Linux
/dev/sda5 25414956 1360287809 667436427 83 Linux
/dev/sda6 1360287873 1423198349 31455238+ 83 Linux
/dev/sda7 1423198413 1465144064 20972826 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00025bd3
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953523711 976760832 83 Linux
I need to post this now and come back from a different machine to note the error messages I am now getting on boot. ...
Note that when I boot and press esc to get the menu I get the menu.lst I created (in the second quote) above in /dev/sda6, ie the one with the Arch hd and uuid entries - so grub is looking there and finding that menu.lst, but something goes wrong after that.
OK. Have now booted the machine and after pressing esc and selecting the uuid entry (the same thing happens with the hd entry) I get a whole lot of stuff, but what seems relevant is (typing it out) -
List of all partitions:
No filesystem could mount root, tried:
Kernel panic - not syncing: VS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.39-Arch #1
If anyone can help I'd really appreciate it. This is my MythTV machine so the WAF is about to take a big dive!
If I could just install grub to the MBR as if this was a new installation of Arch that would be great.
I am really lost as to what is going on, which I'm sure is evident.
Thanks a lot
belbo
Last edited by belbo (2011-08-12 13:31:23)Hi. Unfortunately that didn't help.
So next, based on this post https://wiki.archlinux.org/index.php/Ke … el_version I chrooted into Arch and (a) rolled back and (b) reinstalled my kernel but that didn't help either. I suspected it wouldn't because the kernel was working fine before I deleted the partitions in question.
[2011-08-08 23:32] ==> Image generation successful
[2011-08-08 23:32] upgraded kernel26 (2.6.39.3-1 -> 2.6.39.3-1)
I then did a pacman -Suy and the linux package has now replaced kernel26. ( See this wiki entry http://www.archlinux.org/news/changes-t … filenames/). I didn't change anything in menu.lst owing to this and it seems there is no need to. Unfortunately this hasn't helped either - still getting the kernel panic.
Pacman.log relating to the new kernel package below -
[2011-08-09 00:22] Running 'pacman -Suy'
[2011-08-09 00:22] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:23] Running 'pacman -Suy'
[2011-08-09 00:23] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:26] removed python-mygpoclient (1.5-1)
[2011-08-09 00:26] removed kernel26 (2.6.39.3-1)
[2011-08-09 00:26] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-09 00:26] upgraded grub (0.97-17 -> 0.97-19)
[2011-08-09 00:26] upgraded icu (4.8-1 -> 4.8.1-1)
[2011-08-09 00:26] upgraded linux-firmware (20110512-2 -> 20110727-1)
[2011-08-09 00:26] >>> Updating module dependencies. Please wait ...
[2011-08-09 00:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-09 00:26] ==> Building image from preset: 'default'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [autodetect]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-09 00:26] 7079 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] ==> Building image from preset: 'fallback'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-09 00:26] 23360 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] installed linux (3.0.1-1)
I don't think I've mentioned that my old menu.lst seems to have disappeared and so must have been on one of the partitions that were deleted. I did have 2 Arch installations when I was setting things up months ago and that menu.lst may have been on the other partition but pointing to this partiton's kernel for booting. Presumably that's possible since this partiton is definitely the one I have been using for the last several months (confirmed by log and other files updated in the last few days etc). Even so, I suppose that probably wouldn't be relevant to this issue, since grub is finding the menu.lst on this partition when it boots so it is looking in the intended place now.
It seems I'm at a bit of a dead end. It seems these kernel panics are usually because there is something wrong with the kernel - which there wasn't with mine (and presumably the kernel in the new linux package is fine) or there is a typo in menu.lst (I can't see one and nobody has pointed one out yet) or menu.lst is pointing to the wrong partition (mine is pointing to the same partition and /boot directory that is found by grub - which is where my boot image is located - so it seems to be correct). I have nevertheless tried editing the menu.lst entry when booting to boot from different partitions but so far that hasn't worked either.
If anybody has other ideas I'd really appreciate it.
If not, some suggestions on re-installing would also be appreciated. I have a recent tar archive of the partition, but presumably reinstalling that wouldn't be of much use since it would just put back what is currently there. I guess that I need to format the partition, create a separate boot partition, do a fresh install of Arch into the formatted partition (and with boot in the new boot partition). And then restore my tar backup (excluding the boot directory) into the formatted partition?
Any assistance greatly appreciated.
Thanks
belbo
Last edited by belbo (2011-08-08 23:17:49) -
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options. -
Can you dual-boot arch linux with Windows 7 ?
Here is my current dilemna; I have Windows still on my netbook for the only reason that I use it for gaming .
Other than that I have Linux Mint dual-booted with it .
Now my question is, can I just instruct arch to install into the already existing linux partition, formatting it and making it it's home, or do I have to delete it, thus rendering my computer inoperable until I successfully dualboot arch with it ? o_O
Or should I take a different approach altogether, and triple boot my netbook with arch, mint, and windows, and then from there delete the mint partition and allocate the free space accordingly using easeus partition master (another reason I still have windows) ?
Please help . D:
PS. I HATE Windows but only kept it because apparently not everyone shares the Linux view of technology . >.>
Last edited by AstarothMastemaRavenclaw (2011-02-06 16:42:35)if youre happy with your partition layout u can just install arch ofc.
while installing you will be prompted to select mount points and create filesystems ( you can skip the partition step )
select your current / partition for, well, /
and /home for.. /home.
the installer will then create new filesystems there (formatting those partitions) and set mountpoints -
Hello; I am using Numbers '09 version 2.1 (436). I tried unsuccessfully to upgrade at one point. Now can't open existing documents. Message "The index.xml file is missing". How can I correct this ?
Thank you
TomI't not iWeb that got damaged but the domain file. The index.xml file is inside the domain.sites file that's located in your Users/Home/Library/Application Support/iWeb folder. Do you have a backup of that file you can revert to? If so then do it. Otherwise a long shot but try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
At what percent e-tester can identify java applet objects. Plz see message.
Hi,
Me new to this group.
I am here to find out whether e-tester can test java applet or not.
I am testing a web application which is completely Java applet base.
Envirnment used jdk1.1.8 and Jre1.4.
I have been trying to identify applet object used in our application.
problem i faced:
when i set java option in option seting for both Microsoft applet and sun system applet. where my system having jdk1.1.8 and jre1.4.
Recording on above envirnment I am able to record my application but i can not play that. On this case I marked Abbot script generated.
when uninstall jdk and jre.
I am able to record and play my application still some step. But I am not able to customize it.
this application also uses StarTree a hyporbolic tree API from
"Business Object" now bought by SAP (this api used inside applet
frame).
Is any one work on e-tester to automate in and out of an application which is built in java applet.
Can some one help me to figure out where I am doing wrong.
Before this I worked on e-tester year back to automate one of our application and still we are doing our regression on that.
Expecting some helpWhen you say customize, are you referring to parameters? They is handled differently with applets. I believe there is documentation on this.
-
How to test whether a table exists in database?
How can I test whether a table exists in a database before I execute a query? If the table doesn't exist, I want first create a default table with certain name so that I can always display something in JTable.
Thanks!Hi,
There are tow ways :
The first one is :
- load the list of tables of the Database in a Vector for exemple by using methode DatabaseMetaData.getTables () and you can test if the table exist or not in the vector by using methode Vector.contains(Object o).
The code seems Like that :
// Loading List Of Tables
// you need to load the list of tables at the begening of
// your class
Vector listOfTables = new Vector();
try
rs = yourConnection.getMetaData().getTables();
while (rs.next())
listOfTables.addElement(rs.getString(3));
catch(SQLException exp)
// When you need to test the existance of table name
// you add this line
if(listOfTables.contains(tableName))
// your code
The second one :
try
//execute your query
catch
//Create your default JTable
I hope that my response can help you!
Ciaou,
Anis -
When I try to download Lightroom it tells me that it is no longer supported on the platform that Ii currently have. As stated I am using PS, InD and Illist all from the Creative Cloud without any problems, what gives?
Hi,
When you say you get an error message running the MacOS x installer disc, is it when you boot on the CD or when you insert the disc in your SuperDrive during an open session? Have you tried booting from the CD and running the Apple Hardware Test? From your list of trouble, it looks like a bad RAM, or maybe a corrup hard drive sector, but it could be something else entirely. Next time you boot, try verbose (press Command-V right after the gong), you'll see every step of boot on screen, it'll give some indication as to what makes your MBP hang up. You can also try to run AppleJack in Single-User mode (first install AppleJack ; download from here : http://applejack.sourceforge.net/ ; install as admin is required ; boot in SU by pressing Command-S at the gong): it's done wonders on my machine more than once...
"Oh, one more thing"... Is there anything connected to your MBP via USB/Firewire/Bluetooth? If so, try and unplug/disconnect everything, then boot up, just so we can rule a bad driver out. -
Can't open existing/create new files after reinstall
I had the trial version installed to test the software and everything was running fine until I started having some issues with my computer. So I ended up reinstalling the trial version and now I can't open existing XLF files or create new ones. Both the "new" and "open" icons are now grayed out.
Hi,
Issuess if Opne and new are grayed out..
Make sure you take a fresh copy of Xcelisu and reinstall the entire application again.
If any other issuess please let me know i am happy to help you... -
The application "Dropbox - test" can't be opened -1712
I created two additional dropbox applications though Automator and they have been working fine with no problem along with my own normal Dropbox application. I have them all set to open on start up along with Google Drive so that they appear in the top bar on my Macbook Pro. They are also in the sidebar on Finder.
The problem i am having is that when i start up my Mac, my normal original Dropbox opens and syncs however the other two don't open. When i go to Applications and click on either of the two to open then i am getting the message - The application "Dropbox - test" can't be opened -1712.
I have been reading about this online and went to the Activity Monitor and forced quit these and they show up in red when i search for them. But then i still have no luck in opening them. I have allowed Applications to be opened from Everywhere in the System Preferences - Security section too.
Its very strange how i have had this working with no problems and then it suddenly stops.
Any help or suggestions anyone can give would be really appreciated.
Thanks!Where are you choosing to download the install files too? What is the status of the download in the Adobe Support Advisor?
-
Have been using successfully Acrobat 8 Standard, version 8.3.1 for years. Suddenly can not digitally sign anything because software can not find "existing digital ID file?
Are you still using Acrobat 8? If not read further.
All Acrobat versions prior to 11.0.07 had a security flaw that they allows signing with certificates that had "Extended Key Usage" (EKU) restricted to certain certificate uses and those did not include document signing. Most frequently those were certificates with "Client Auth" or "Server Auth" in EKU. Acrobat/Reader 11.0.07 fixed this problem, which also means that while previous versions accepted such certificates for signing 11.0.07 and later do not. -
I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..
1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install
Maybe you are looking for
-
How do I make my old iphone work like an ipod touch without the sim card?
I upgraded to a 3G iPhone and love it. I want to be able to use my old iPhone like an iPod touch, but when I ran a sync it wouldn't let me do anything without a sim card and now it's useless and empty. Is there a way to bypass the activation and get
-
Muse auto detecting desktop vs. mobile layout
Hi, In my site which is under development at www.gary-online.com/ncmobile If I view it on my mobile device I see the 'desktop' version of the site. I would expect that Muse would detect that this site has two possible layouts (a desktop and a mobile
-
SOA Suite to accept non-SOAP HTTPs Post
Is it possible to configure BPEL or ESB to accept an old fashion HTTPs post? I looked at the Bindings samples, but unless I'm missing some files they appear to be posts rather than accepting a post. Thanks in advance.
-
Bug in wifi/wireless connection with captive portal in UK/London ?
With my macbook pro (10.6.4) & iphone (iOS 4), I do not manage to have an easy connect on free wifi captive portals in London. They all are new connections (unknown networks before). * dhcpd lease seems to be instable. I can get wifi connection (with
-
How can I display Task's "Resent Changes" or "Updates" or "History" in the project site
Hello, When a task is assigned to a team member, the team member may keep sending frequent updates "Status" for the task to the approving whenever he finishes anything in the task. These updates can be shown in the Task Details (in PWA). My question