Large data transfers in early morning hours putting me over my data limit

I am getting large data transfers labeled Intranet Media Net from two different Iphones in my home. These transfers occur typically in the early morning hours when we are sleeping and when we should be connected to Wifi. ATT suggested that I turn off the option to send updates to Apple, which I did. However, the charges are still occuring. Last night a 35MB transfer has nearly put my daughter's phone over her 200 MB limit. ATT suggested that I turn off cellular data to eliminate these from occuring, but that seems silly. Plus, who is to say that they won't occur when I turn cellular on, in order to use data when I am outside of a Wifi area? Any help would be much appreciated. I don't know if this is an Apple issue or an ATT issue.

How do you get logs out of a TC anyway?
From the latest one you cannot.. no logs at all so that is the direction Apple is moving.. the black box.. well white box that you feed this into and get that out of.. but all the works inside are complete mystery.. that is the end point.. not quite there yet.
Logs from v5 utility or SNMP.. both still working on any of the earlier TC.
You can install v5 on Mountain Lion.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
Give 7.6.3 firmware the heave ho.. and use 7.6.1 and if the TC is more than 18months old.. round about .. even a Gen4 you can go back to 7.5.2.. which seems more solid again.
As stated above.. by the time you get early Gen3.. they can have board faults. and earlier ones are especially not reliable with power supply faults.

Similar Messages

How can I hide early morning hours in iCal?

how can I hide early morning hours in ical??? i'm sleeping at those hours and i really don't need to see them. it would give me a lot more space to see what really matters if i could define myself what hours i would like ical to show. i saw an old post that is locked and doesn't help. also searched the web and didn't find anything. i would be great to solve this very annoying problem. thanks!

yes, it seems so. i guess we can't modify that. =/ maybe some crazy script or programming thing... or something like that would do it, though.

Prevent calendar from showing early morning hours on week view?

I really don't need to see 1AM - 8AM on the week view of my calendar. I went in the settings and tried to say that my day starts at 8AM, but it still shows me the early morning hours. How can I change this?
Thanks!

polishedstaple,
As depicted in this example, that choice only changes the shading of the calendar background for the specified timeframe.
It will not hide the excluded times from being displayed.
;~)

How can I hide the early morning hours on the day view

I'm not even sure why it shows 1AM to 6AM on my day calendar. How can I stop that from showing?

polishedstaple,
As depicted in this example, that choice only changes the shading of the calendar background for the specified timeframe.
It will not hide the excluded times from being displayed.
;~)

My 2007 Intel iMac is waking from sleep on its own during the early morning hours. Not sure why. Is there a way to find out by looking at some sort of log files or something else?

I'm wondering if someone else is having control of my iMac as it randomly wakes up from sleep while I am sleeping sometime during the night. I've woken up with the light from the monitor brightening my room. Need to find out what is causing it to wake up and stay on. Any suggestions?

I've had this same issue lately. Here's one thing to check: System Preferences > Energy Saver > Wake for Network Access should be unchecked.
Mine is unchecked, so the only other thing I can think of is that it might be Time Machine backing up. My iMac is backing up to an external hard drive, and also sharing that drive over the network so two other Macs can back up as well.
Should be an easy theory to test. Turn off AirPort, unplug Ethernet, and let the iMac sit. See if it still happens.

How large of a hard drive can i put in my Macbook Pro (early 2011)

how large of a hard drive can i put in my Macbook Pro (early 2011) and where can i get one?

You can find answers to both at OWC as well as installation tutorials. I think you will find 1 to 1.5 TBs are the largest.

By what time zone does Verizon use to log data usage? When I checked my current usage, there is data used logged in at early morning times and I don't have anyone else who is up at these times.

By what time zone does Verizon use to log data usage? When I checked my current usage, there is data used logged in at early morning times and I don't have anyone else who is up at these times. I also have 1.8+ GB charged to my allowance that I don't understand at all how it is mine because the highest I've ever logged at any given time has been barely 0.5 GB. I'm cruising along at .04-.07 GB and all of a sudden appears a 1.8+ GB deduction/usage and it makes me wonder what the ???? is going on. Is Verizon posting fraudulent usage amounts just to drive up my usage so I have to buy more Gigs?

The time is not the time of actual use, but the time a tower reports the use. The data would have been used anytime prior to that time. Usually, but no always, the usage happened between the time prior and the time reported.
For example:
9:00 AM   1.23 MB
7:05 AM   0.01 MB
1:15 AM 350.03 MB
8:00 PM   23.89 MB
This does not indicate 350 MB was used at 1:15 AM. It really tell you 350 MB was used sometime between 8:00 PM and 1:15 AM.
The times are local time zone as far as I can tell.

I cannot print or send a fileI downloaded Adobe yesterday and have spend 7 hours putting together a document I cannot print or send. If I print it out it only prints the template and not the data entered. I am very frustrated.

I cannot print or send a file I spend 7 hours putting together and am becoming very frustrated. I downloaded this software yesterday and can only print out the template and the data entered does not appear. Please help.

This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Lose Network Connection w/AEBS 802.11n when transferring large data amounts

Hi,
I have a LaCie 500GB external hard drive that is connected to my AEBS 802.11n via a USB hub. Lately, when I am backing up my MacBook Pro to that drive, transferring 5GB or so of data, I notice that my MacBook Pro loses connection with the AEBS (i.e. the network goes down) right smack in the middle of the data transfer. I either have to reboot the MacBook Pro -- or -- unplug and replug the AEBS to reestablish connection.
I was just wondering if this sort of network connectivity loss is being experienced by other people doing large data transfers over the AEBS to an external drive?
Thanks.
Message was edited by: jmFightSpam

I hate to be the one adding a "me too" post, but, me too!
When I try to open iPhoto (library stored on a USB drive attached to AEBSn) the AEBSn crashes, flashes orange once or twice and then restarts. Currently running firmware 7.2 because 7.2.1 wasn't allowing me to reconnect to AirDisks after MacBook went to sleep. If the drive is connected directly to my MacBook there is no problem.
If anyone, anywhere has any idea, I'd be very grateful!

AIX network option to help large data transfers:-

Just to let others know about this if they wish to review and test.
The no command on IBM AIX allows changes that improve large data transfers between AIX boxes and others. We improved our backups and interface transfers with these settings.
TCP Network Parameters
NAME CUR DEF BOOT MIN MAX UNIT TYPE
tcp_recvspace 512K 16K 512K 4K 8E-1 byte C
tcp_sendspace 512K 16K 512K 4K 8E-1 byte C

After copying files all day, it seems that by reformatting the drive but manually selecting a partition and setting it to GPT seemed to have solved the large volume transfers, whereas doing a "simple" erase alone may lead to issues...
Not sure why this is as the "simple" erase on an Intel Mac should basically be doing the same thing (GPT format).
Strange...

Moving large data real-time

Anyone having an idea for moving a large data set from one core's thread to another's thread, in a Real Time system, where it will be put into a DAQ's output buffer? I have an array ,which at the max is 125625 X 23 X I16, which is built column (the 23 dimension) by column (actually it is done in a replace array element mode), that is then is too be "exported" to the other core's thread. There it is to be loaded into the DAQ cards' memory, to be output. I need to be able to do this in a pretty timely manner. When I try to use a Function Global Variable, that is "loaded" one column at a time, it is _slow_ ! Need a faster method!
Thanks,
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

I haven't tried queues for core to core communications before, hadn't considered them, but since some recent revelations have shown that RT lelvel determinism isn't a critical issue I guess that I can examine them as well. Not that some of them necessarily have jitter issues, but I was being conservative. Will put together a trial test case. Thanks, as usual, for your help Ben. Hope the weather in your neck of PA wasn't too bad. Up in Syracuse the are 400% more snow than this time last year, and last year the season had 140+" (norm is closer to 115), and that was in a very truncated winter, not much until third week of January.
Hmm, three stars. Wonder what I said that annoyed someone, or underwhelmed them?
Even weirder is that at the LabVIEW forum level it is showing 4 stars, two voters. Hmmm, too early for me, the coffee isn't hitting (actually not able to drink coffee lately)
Message Edited by LV_Pro on 12-17-2007 09:15 AM
Message Edited by LV_Pro on 12-17-2007 09:19 AM
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

[Bug?] X-Control Memory Leak with Large Data Array

[LV2009]
[Cross-posted to LAVA]
I have found that if I pass a large data array (~4MB in this example) into an X-Control, it causes massive memory allocations (1 GB+).
Is this a known issue?
The X-Control in the video was created, then the Data.ctl was changed to 2D Array - it has not been edited in any other way.
I also compare the allocations to that of a native 2D Array (which is only ~4MB).
Note: I jiggled the Windows Task Manager about so that JING would update correctly, its a bit slow, but it essentially just keeps rolling up and doesn't stop.
Demo code attached.
Cheers
-JG
Unable to display content. Adobe Flash is required.
Certified LabVIEW Architect * LabVIEW Champion
Attachments:
X Control Bug [LV2009].zip ‏42 KB

Hi Jon (cool name)
Thank you very much for your reply. We came to this conclusion in the cross post and it is good to have it confirmed by LabVIEW R&D. Your response is also similar to that of my AE which I got this morning as well - see below:
Note: Your reference number is included in the Subject field of this
message. It is very important that you do not remove or modify this
reference number, or your message may be returned to you.
Hi Jon,
You probably found some information from the forum. The US engineer has gotten back and he said that unfortunately that's expected behaviour after they have conducted some tests and this is what he replied:
"X Controls in the background use events structures. In particular the Data Change Event is called when the value of the XControl changes (writing to the terminal, local variable, or value change property). What is happening in this case is the XControl is getting called to fast with a large set of data that the event structure is queuing the events and data that a memory leak is produced. It is, unfortunately, expect behavior. The main work around for the customer in this case is not call the XControl as often. Another possibility is to use the Synchronous Display Property to defer updates to the Xcontrol, this might slow down a leak."
He would also like to know if you can provide with more details how you are using the Xcontrol, perhaps there is a better way. Please refer to the link below for synchronous display. Thank you.
http://zone.ni.com/reference/en-XX/help/371361G-01/lvprop/control_synchronous_display/
In my application I updated the X-Control @ 1Hz and it allocated at MBs/s up to 1+GB before it crashed, all within a few hours. That is why I called it a leak. I am really worried that if this CAR gets killed, there will still be an issue lingering that makes using X-Controls a major problem under the above conditions. I have had to pull two sets of libraries from my code because of this - when they got replaced with native LabVIEW controls the leak when away (but I lost reuse and encapsulation etc...).
Anyways, I really want to use X-Control tho (now and in the future) as I like all other aspect of them. If you do not consider this a leak, can a different #CAR be raised that may modify the existing behavior? I offer the suggestion (in the cross-post) that the data be ignored rather than queued? Similar to Christian's idea, but for X-Controls. Maybe as an option?
I look forward to discussing this with you further.
Regards
-Jon
Certified LabVIEW Architect * LabVIEW Champion

Loading Matrix Bound to UDO with Large Data Set

Hello Experts,
I have been looking on the forums for the best method out there to effectively load a Matrix that is bound to a User Defined Object (UDO). In short, I will explain to you what I would like to do. I have a form that has a matrix on it bound to a User Defined Object. This matrix takes data stored in other UDO forms/tables and processes it to extract new information.
Unfortunately, the resulting dataset is quite large (up to 1000 rows). I realize if this were just a "report" I could easily do this with a Grid. I also realize if this were just a Matrix bound to a User Defined Table, I could bind it to a DataTable and perform the query that way. However, since this is a Matrix bound to a DBDataSource (as I would like to have SAP handle any updates/finds) I believe my only options are to try and use a DBDataSource.Query method and try to work with Conditions.
The DBDataSource.Query method has not proven to be effective due to the complexity of the query and the multiple tables involved. I have read from others on the forum that I could just load the matrix by temporarily databinding the matrix to a DataTable and then, after it is loaded, switch the databinding back to the DBDataSource but this does not work as it comes back with an error informing me (rightly so) that there are already rows in the matrix.
One final option would be to use the User Interface (UI) to cycle through and update each cell of the matrix with the results of a recordset, but, as I said, this can be a large dataset and that could take hours (literally).
In short, I was wondering if anyone out there can advise me on the most effective options I have. Is there a way to quickly load a matrix bound to a DBDataSource? Is there someway I can load the matrix by binding it to a DataTable and then quickly move this information over to the DBDataSource (I already attempted this and the method I used was as slow as using the UI to update the Matrix)? Are there effective ways to use the DBDataSource.Query method that I do not know much about (and cannot find many examples of how this functionality is truly used)? Should I abandon the DBDataSource (though I believe this is the SAP preferred method) and, if so, is there another technique to appropriately update the database other than using DBDataSource? Others have mentioned handling the updates to the database themselves but I am not sure what this means (maybe it means using SQL UPDATE/INSERT?). Is there a ways to Flush matrix information to a DBDataSource if the DBDataSource was not used in the loading and is not currently bound to the matrix?
Sorry for the numerous amount of questions but thanks for the advise.

        Dim oForm As SAPbouiCOM.Form
        Dim creationPackage As SAPbouiCOM.FormCreationParams
        creationPackage = sbo_application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
        creationPackage.UniqueID = "MyFormID"
        creationPackage.FormType = "MyFormID"
        creationPackage.ObjectType = "UDO_TEST"
        creationPackage.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Fixed
        oForm = sbo_application.Forms.AddEx(creationPackage)
        oForm.Visible = True
        oForm.Width = 300
        oForm.Height = 400
        Dim oItem As SAPbouiCOM.Item
        oItem = oForm.Items.Add("1", BoFormItemTypes.it_BUTTON)
        oItem.Top = 336
        oItem.Left = 5
        oItem = oForm.Items.Add("2", BoFormItemTypes.it_BUTTON)
        oItem.Top = 336
        oItem.Left = 80
Now put and Edit box to DocEntry
        oItem = oForm.Items.Add("3", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oItem.Top = 5
        oItem.Left = 5
        oItem.Width = 100
        Dim oEditText As SAPbouiCOM.EditText = oItem.Specific
        oForm.DataSources.DataTables.Add("oMatrixDT")
        oItem = oForm.Items.Add("oMtrx1", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
        oItem.Top = 20
        oItem.Left = 20
        oItem.Width = oForm.Width - 30
        oItem.Height = oForm.Height - 100
        Dim oMatrix As SAPbouiCOM.Matrix = oItem.Specific
        Dim oColumn As SAPbouiCOM.Column = oMatrix.Columns.Add("#", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "#"
        oColumn = oMatrix.Columns.Add("oClmn0", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "BP Code"
        Dim oLinkedButton As SAPbouiCOM.LinkedButton = oColumn.ExtendedObject
        oLinkedButton.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_BusinessPartner
        ' Now bind Columns to UDO Objects in Add Mode
        oEditText.DataBind.SetBound(True, "@UDO_TEST", "DocEntry")
        oMatrix.Columns.Item("oClmn0").DataBind.SetBound(True, "@UDO_TEST1", "U_CARDCODE")
        oForm.DataBrowser.BrowseBy = "3"

Reg : Daily i got 120 ABAP Runtime Error with in 40 Mins(Early Morning)

Dear Friends,
I got following errors regularly. when i run t.code RSBTCDEL and RSSNAPDL. what can i do? then Regularly morning i got same morethan 120 Error. User is SAPSYS 000 Client. How can avoid this type of ABAP Runtime Error.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          10.06.2009 15:04:23
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "[601] Could not continue scan with NOLOCK due to
      data movement."
     Internal call code.........: "[RSQL/FTCH/TBTCO ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
     "SAPLBTCH" or "LBTCHF19"
     "EXECUTE_BP_JOB_SELECT"
If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System u2192 List u2192 Save u2192 Local File u2192 (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.   Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File-(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program   In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which actions and input led to the error. The exception must either be prevented, caught within proedure
"EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
in the RAISING clause of the procedure. To prevent the exception, note the following:
Client.............. 400
User................ "BASIS"
Language key........ "E"
Transaction......... "SE38 "
Transactions ID..... "D7A155DEA42EF1EEB52A000423BF7C3A"
Program............. "SAPLBTCH"      ( Run a Sap Standard Report RSBTCDEL)
Screen.............. "SAPMSSY0 1000"
Regards
keshav

Hi Juan,
My System is
ECC 6.0
Database : MS SQL Server 2005
OS - Windows 2003 server
SAP Patches level is Basis - SAPKB70016
                               ABAP - SAPKA70016
                               Kernel patch level - 185
when i has update the kernel patches after only i got this error morethan 120 like early morning 4.40 AM to 5.18 AM regularly. what can i do?
Regards
keshav

How to Improve large data loads ?

Hello Gurus,
Large data loads at my client long hours. I have tried using the recommedations from various blogs and SAP sites, for control parameters for DTP's and Infopackages. I need some viewpoints on what are the parameters that can be checked in the Oracle and Unix systems. I would also need some insight on:-
1) How to clear log files
2) How to clear any cached up memory in SAP BW.
3) Control parameters in Oracle and Unix for any improvements.
Thanks in advance.

Hi
I think those work should be performed by the BASIS guys.
2)U can delete the cache memory by using the Tcode : RSRT and then select the cache monitor and then delete.
Thanx & Regards,
RaviChandra

Large data transfers in early morning hours putting me over my data limit

Similar Messages

Maybe you are looking for