Large downloads hanging

I was going to post this in the Safari discussion forum but this has been happening with both Safari and Firefox and I think it's another Lion problem. I'm trying to download a file from our B2B site and everytime, the download stalls and eventually just hangs. No problems with PC users downloadind the file. No problems in Snow Leopard. Hard disk is only 20% full. Lots of memory (8 GB). Could there be a special setting in network preferences somewhere that I need to configure? I can't post the URL to the file here as it is a private link. Thanks for any ideas or suggestions/

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • PC FREE - what about large downloads?

    I want to give an ipad to someone, to use " PC FREE ". 
    Will they be able to download large content directly over the iPad's 3G connection?  I currently can't download a TV show from iTunes to my iPhone over 3G, for example. 
    They don't have broadband, only dialup. 
    I guess they could get a MiFi modem over 3G so that the iPad could "be connected with WiFi", but would seem crazy since the iPad has 3G built in.

    I didn't think about it until Dahveed brought it up, but basically, if you're worried about "large downloads", then not having broadband will be quite expensive.  AT&T & Verizon have data caps.  And a 10GB plan from Verizon will cost $80/mo.  Even the Mi-Fi from Verizon has a data cap, so a lot of "large downloads" will get you into trouble.  It's not the Wi-Fi on the iPad you need to worry about.  It's the fact that you're still connecting over cellular 3G.
    The one current plan I could think of recommending is a Mi-Fi from Sprint.  Sprint's WiMax 4G is unlimited so a 4G Mi-Fi from Sprint, while still costing $60/mo, would avoid overage charges.  The catch is you must be in a 4G area, because you're capped to 5GB of Sprint data in 3G areas.  And that is just what Sprint is offering for now.  They just got the iPhone so who knows if their network can take the strain, thus perhaps Sprint's unlimited data may go away.  I'm told that Verizon's LTE 4G will be unlimited...for now.  If that is so, then a Verizon LTE Mi-Fi (if and when it's availalble) would do...for now.
    Realistically, advise the person you're giving the iPad to that they must watch what they do on the iPad.  No streaming.  (No Netflix, no Pandora, etc.)  General web surfing is fine and occasional Youtube is okay.  But no full length movies (unless they're using Sprint on WiMax.)

  • Firefox can't handle large downloads.

    Whenever I try to download a large file, the download stops partway through. There's no particular pattern to when it stops; sometimes it'll freeze up within the first minute or two, sometimes it'll get almost to the end before dying. In any case, the download speed for that download drops to zero, and won't pick back up under any circumstances, even though I still have full internet connectivity for general browsing and can even download smaller files no problem. It might have more to do with the filehosting services that provide these large downloads, but it happens for any large file, no matter where I'm download from. I've had it happen on Megaupload, Fileserve, Hotfile, Uploaded.to, Zomg Uploads, and a number of private file servers. If the server in question plays nice with Flashget I can use that, but I can't use Firefox's built-in download capabilities for anything larger than a few dozen MB.

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
    You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See http://kb.mozillazine.org/Unable_to_save_or_download_files

  • Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

    Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

    Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

  • CC downloader hangs at 41% every time

    I am trying to download a trial of Illustrator CC but the download hangs at exactly 41% every time. This time (the fourth time) I've left it running for 6 hours and it still hasn't budged past 41%. I don't receive an error -- it just sits there, at 41%. I don't know what's wrong. I successfully installed Photoshop CC before.
    I've already tried uninstalling and reinstalling CC to no avail. My internet connection is fine -- I've been downloading other things without problems all day. Can someone please suggest a solution? I've found threads that have posed similar problems but no one seems to have fixed it.
    I generally love Adobe's products, but I've never been more frustrated than I am now with Creative Cloud.

    I'm having the same problem today. I'm trying to install previous versions of Premier pro (CC & CS6), using the Creative Cloud application manager. Running on Mac OS 10.10.1
    It keeps freezing at 41%

  • Leopard NAT downloads hanging at random intervals?

    Hey guys,
    Tried upgrading to Leopard Server 10.5.2 for the first time today, with mixed results. Our office has computers that are given 192.168 addresses from DHCP on Leopard Server, and we use NAT+Firewall on Leopard Server to route traffic to the internet. Nothing fancy.
    The new problem: downloads hanging at random intervals.
    Things cruise just fine at first, but at some point -- sometimes at 4 MB, sometimes 20 MB, sometimes 200 MB -- transfers completely hang, and data would stop transferring.
    Not just web data -- I had a number of remote SSH sessions simply freeze in the middle of typing.
    This is using stock NAT and stock Firewall and stock DHCP.
    Anyone else seen this, or is it just me?

    This is happening to me as well. All web traffic will stall for about 20 seconds then startup again. It's really starting to get annoying. Can't find anything in the logs - the server is barely being taxed at all for disk/proc/network. I can't figure it out but my coworkers are starting to get ****** that ever 10 minutes the network goes out then back on.
    I can still hit the machine internally via SS or Server Admin or SSH. Its happening on the external interface.
    Anyone else seeing this?

  • Broken connection in the middle of large download

    I recently purchased a HP laptop, Windows 7. I added it my wireless system BEFWS4 V4. It works just fine with downloading most things. But the connection is interrupted in the middle of large downloads such as a movie.  HP checked things out remotely and claims that the router must be the problem. Is that reasonable, and if another router is required. Can you suggest something that will be relatively easy to install. By the way my home computer is running XP.
    Thanks,
    Sid

    Read here...
    http://homecommunity.cisco.com/t5/Wireless-Routers/Getting-disconnected/td-p/349502

  • Bootcamp assist support software download hangs, bootcamp assist support software download hangs

    bootcamp assist support software download hangs in the middle -about 20% level - any solution? please

    The proxy setting is an issue for some, System Preferences/ Network/ Advanced/ Proxies/ make sure everything is UNchecked.
    The Apple server is extremely slow and unreliable for some people so it's just a matter of retrying a few more times.
    Here's what a quick search turned up.

  • Download hangs

    I've just got my Apple TV, connected to a Dual G5 via Ethernet. Have a Cable Modem connected to a hub, to which both the G5 and ATV are connected.
    My problem is that I can't get anything to download. ATV connects to the net. I can get the first 45 seconds of You Tube videos or Software update downloads, but then the download hangs and won;t resume.
    Tried restarting ATV, but still the same issue...

    I actually noticed the problem while trying to update from 2.4 to 3.01. Strangely, although I ordered ATV after 3.01 was released, it's still shipped with 2.4... Anyway, the update will start downloading and then just hang.
    Meanwhile did a factory reset. Watched a YouTube video of 2 min without hangs! Wow, thought the problem was solved. But the next one hung 2 min into the video. The 3rd one hung after a few seconds.
    When watching movie trailers, the blue download bar shows fast progress and indicates a full loading of the preview. However, after ~ 30 seconds, the preview hangs, and the blue bar goes from full to 30 sec. Then it goes to full until the next hang and so on...
    I have a very fast cable modem connection (130 mbps). When downloading software updates from Apple, I usually can download at a speed of >2MB/sec (Mega Byte!).
    ???

  • 2 approved updates gives large download size

    Hi All,
    I've been using WSUS for some time and I have one thing that happens that I would love to understand why.
    When I approval windows security definitions why do I end up with a large download.
    Today I approved windows defender definition and windows security definition and the download was 2 files at 750mb.  We have approx 30 PC's in WSUS but I would have thought the download would have been no more than 50mb.  
    Am I missing something?  I tried searching but I just couldn't find anything.  Sorry if this has been asked and answered many times.
    Regards,
    Chris
    This topic first appeared in the Spiceworks Community

    Yes. It will have all VM related files in it. I would say it's less. Its an Appliance and it will need minimum of 2GB worth of files to work.
    If it were built on windows you would be downloading an OVA of at least 8GB

  • ITunes Downloads Hanging & Freezing

    We seem to be experiencing difficulties when downloading music from iTunes on multiple of our workstations. When a user signs onto their personal iTunes account and tries to download songs they have previously purchased, the download begins, but shortly into the download (1-5 MB), the download hangs, and the time remaining counter begins to increase. After 30-90 seconds, the download then resumes, the song starts to download again, but it then hangs again. The download does eventually complete, but the total download process takes 3-5 times longer than it should (with multiple freezes).
    I've noticed this issue mainly with our Dell Precision workstations with Broadcom NetXtreme 57xx Gigabit Controller. When uninstalling Symantec Endpoint Protection, the downloads still experience issues. We're running the newest BIOS on each workstation, have downloaded the latest version of iTunes, and have updated the network adapter drivers. 

    I am having the same problem with 8.2.1, which seems to be related to whether my iPhone is connected or not. If my iPhone is connected, it hangs, regardless of whether it is connected upon startup, application launch, or connection after the application has been launched. When I open the "force quit" window, I can see iTunes' status change to "not responding" when I connect my iPhone.
    I trashed all my preferences, even went so far as to trash iTunes 8.2.1 and reinstalled 8.2, but it didn't help. Trying to install an even earlier version of iTunes won't work either, because the earlier versions can't find my iTunes library.
    I wish that Apple would provide a customer service/support line for downloads and updates of its own software.

  • Ios 6.1.6 download hangs

    I am trying to update my friend's iPod Touch 4th gen. OS X and iTunes on her Macbook Air are current.
    I can't download the ipsw file. It gets to about 20% or so and then hangs.
    I can't even get to the updating process, because I always get an error on the download saying the network connection has timed out.
    I have also tried dowloading the ipsw file separately on a PC with the same problem. It gets to about 20% and then just stops downloading.
    This is a PC that never has any problems dowloading large files.
    I have turned off firewalls and so on to no effect. The problem stays the same.
    Thank you!

    No Screen shot visible.
    iPad Recovery Mode = http://support.apple.com/kb/ht4097
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • New Mac Version Flash Player Download Hangs Up at 95%

    I've been unable to download the newest version of Flash Player to my Mac 10.8.5, because the download always hangs up at 95% complete.  I've tried restarting my computer without success.  What is going wrong and what do I do to complete the download.  Previously my Flash Player worked fine, but I was notified that I need to upgrade to the new version.  Now I have no Flash Player working.  Any help you can provide will be much appreciated.  Thank you.

    Hello again, Mike.
    Okay, I did as you said:
    1)     I found the downloaded file in my Downloads folder that I downloaded from the Adobe website.  The file name is: 
    AdobeFlashPlayerInstaller_12_ltrosxd_aaa_aih.dmg
    2)     I then double-clicked on the icon so the Install Adobe Flash Player icon appeared.  I believe doing this is what you called "mount the dmg."  I this is not what you wanted me to do then I need an explanation of what mount the dmg means.
    3)     The window with the Install Adobe Flash Player did not look exactly like the window in the PDF you sent me.  Instead of just showing a small icon in the upper left corner with the file name under the icon Install Adobe Flash Player.app, the window that appeared has a large red band withe the Adobe logo in the upper left corner and a large lowercase "f" in the right side of the red band.  The icon appeared below the red band and the file name was to the right of the icon and showed "Install Adobe Flash Player" and did not include the ".app" at the end.
    4)     I then did a Control click on the Adobe Flash Player icon and which opened the same window that you showed in your response.
    5)     I click highlighted on "Show Package Contents," which took me to the Finder window with the Contents folder.
    6)      I click highlighted on the "Contents" folder and found inside slightly different list than you showed.  My list of contents inside the Contents folder is:
         _CodeSignature
         info.plist
         MacOS
         Pkginfo
         Resources
    7)     Although the list was not the same as the list you identified, both your list and my list did include a folder called "Resources."
    8)     I click highlighted the Resources folder and found a different list than the long list you identified.  I found these contents inside the Resources folder:
         app.bundle
         app.icns
         en.lproj
    So … there was no COCOA installer to run … and I am still stuck and still need your help.
    Thanks,
    Bruce

  • CS5.5 Download hang at ~50%

    Hello,
    I'm trying to download CS5.5 design premium trial, but the adobe dowloader hang at ~50%, the size of file created is 4.080.784Kb.
    I've tried 5 times to download this, and it always hang at ~50%.
    Is it really possible to download it?
    Isn't it possible to provide a direct link to download with firefox or ie?

    (update:) I've also tried downloading other elements, such as CS5.5 master and I've got the same problem. It seems that EVERY downloads stop before the end...
    What does it mean? That Adobe doesn't want users to downlaod trials?

  • Copying large files hangs at "less than a minute"

    hi,
    When copying large files around my intel mac mini system the Finder appears to freeze just before the end - when the dialog window is telling me that there's "less than a minute" left. It doesn't happen ALL the time, just enough times to be a real nuisance.
    Killing the finder doesn't help - I need to power off to regain control of the Finder.
    This recently started to happen after I opened up the mac mini to add more memory. Not sure if this is related - everything else seems to be ok. I have a mixture of USB and Firewire external drives - the mac mini is used to hold all my HD camcorder files and process the iMovie rendering to disk.
    I'm running the latest version of os x with all the updates.
    Any suggestions?
    P
    Mac Intel Mini   Mac OS X (10.4.8)  

    Hi,
    Hello! It's likely a firmware issue with an external
    drive. Check the ext drive's site to see if there's a
    firmware upgrade. Tom
    Thanks for the reply Tom. I've downloaded a firmware updater from the Lacie site, and I'm apparently uptodate. However, I also have a USB Seagate external drive, but the Seagate site seems to only provide support for Windows. grr.
    Is this a known problem with certain drives/firmware?
    thanks,
    P
    Mac Intel Mini   Mac OS X (10.4.8)  

Maybe you are looking for

  • How to find out what a string contains?

    I'm in the process of writing an XML parser for a project that I am working on. There will be one field in the XML that can be used to store an int, a date, or a string. I need to figure out a way to determine if that field contains an int, a date, o

  • Superdrive eats install disc!

    My friend bought a brand new, sealed Macbook Pro 2.16 Intel Core 2 Duo yesterday. He went to reinstall the OS and put the virgin Install disc into the virgin machine. The disc appeared on the desktop and displayed all the appropriate options. He chos

  • Will my mac external cd-rom work on a pc?

    The cd drive on my old pc quit working, but I'm trying to load a game from a cd. I loaded the game on the Mac, using Parellels, but can't get it to reopen. So, I need to get the game on my pc. Any suggestions?

  • Locate my old mobile me account and can't get exchange email to work through the add an email account (exchange) feature under settings.  This is my first Mac

    I am a new Mac user on a mac book pro I7  I am trying to migrate my information from my PC so I can keep my Ipad and Mac Book pro synced.  Secondly I am trying to get my Exchange server email to work.  I have lost both settings password, and user nam

  • Using define for the user variable/

    Hii, I am trying to define a user variable and then using this variable trying to output the result. plz help 1 define ename = 'TURNER' 2 declare 3 result number(7,2); 4 begin 5 select sal into result from emp 6 where ename = '&ename'; 7 dbms_output.