Large export file when application contains a BI Publisher report

Anyone have an idea why an application export file grows dramatically when a BI Publisher report template is added to an application? I have an application that was 400+ KB and went to 88+ MB just by adding one report query and RTF template. This results in taking over an hour to import the application.

Each RTF Report layout is converted to an ASCII string to allow the import routine to load the rtf as part of the application.
If your template has any embedded graphics e.g. a logo then this SIGNIFICANTLY increases the size of the ASCII encoding of the template.
Hope this helps.

Similar Messages

Exporting Files when publishing

I'm trying to publish a project that consist of two menus.
One on slide one, and one on slide two. In the menus, there are
'click boxes' that I have pointed to files. (pdf, htm, etc..) When
I go to publish, it says the files may require output or something.
The issue I'm having is when I publish this and place it on cd, the
paths to all the files is off. The reason is that it's looking to
the same directory structure that I have on my system I'm creating
this on.
Menubuilder allows these files to be output with the
published item and it works ok. I would use menu builder, but it
doesn't have the roll over image capability. Therefore, I'm
wodering if there is a way to do this with a standard captivate
project. (export files) Thoughts? Any help is greatly appreciated!
:)

MenuBuilder does not support roll-over images, as far as I
know.
I tried an alternate method-
Your projext EXE file, along with the files you are not able
to publish to a CD can be added to an ISO image, and then burned to
a CD. I tried out AVS Disc Creator,
and was able to make an ISO image of the files I wanted to
put onto a CD.
It's free...
http://www.avsmedia.com/DiscCreator/download.aspx
I haven't tried adding a autorun to the iso yet, but I am
sure that it would work as well.

Large export file created during expdp

Hi,
When i execute datapump export for a single table it will make 5.6G export file size. While there is only 39K rows in the table. When i import this export file to another scehma it takes only megabytes. More than 98% size reduction. This is mytable sctructure.
ods.mytable
tb_ID NUMBER(22),
p_ID NUMBER(9) NOT NULL,
N_ID NUMBER(9),
D_NAME VARCHAR2(255 BYTE) NOT NULL,
FLAG VARCHAR2(1 BYTE) NOT NULL,
BODY CLOB
Most size taken by CLOB. Looks like most of data is shrinkable. How can i shrink the table to reduce the table size?
Thanks in advance

You can use Shrink or Move option of alter table command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#i2192484
thanks
http://swervedba.wordpress.com/

Black frames at the end of an exported file when converting from 60p to 24p

I have another export issue that I can't figure out.
I import footage I shot at 23.98fps (on a JVC HD100) using a Kona LH card at 59.94fps DVCPro HD, in which it has a 2:3 cadence. I need to make files that are actually 23.98p DVCProHD. Unfortunately, when I export in Final Cut from the 59.94 original, the new 23.98 file has all of the image, exported correctly, followed by a number of black frames such that the total number of frames in the exported file equals the number of frames in the original file. That is:
If the original 59.94 file was 3s long, that is 60 * 3 = 180 frames. The exported 23.98 file also has 180 frames, but only 3s of image = 3 * 24 = 72 frames, followed by 180 - 72 = 108 frames = 4s 12frames of black.
How can I prevent this from happening, and end up with an exported file that is (e.g.) just the 3s of image, and not 7.5s of which 4.5s are black?
It's true that I can manually clip this black off, but I need to do many clips as a batch, and would really not have to change one clip at a time. It is also true that I can do a batch in compressor, and that this process does not suffer this problem -- that is, there is no extra black -- however, there is another problem: the original 59.94 DVCProHD files are actually 1280x720 with square pixels; the files exported from FCP via the KONA DVCProHD codec maintain this true HD proportion, but the ones exprted through compressor (which does not appear to support the KONA LH implementation of DVCProHD as an option) have the size 960x720 with anamorphic pixels, and I would rather keep the original size. Thus, I would rather export from fcp. If anyone has any insight into how I might resolve this....
Thanks,
Robert Schaller

Thanks. If I understand you correctly, it does seem to export correctly if I paste the 59.94 clip into a 23.98 sequence (you can't nest sequences that have different time bases) and export from there, and it doesn't even have to specify square pixels, etc.: the AJA codec implementation seems to take care of that. There is no longer any extra black, so, per file, that gives the right result.
That, however, is only one part of the problem, though a significant part. Next is, I really would like to do this as a batch process, as I tend to have many clips to do at one time. As soon as I try any kind of batch export, I end up with one of two problems:
1) if I try to batch export from fcp, I'm back to having extra black frames, or
2) if I try to batch export with compressor, I get 960x720 files.
If anyone has any suggestions on how to get the right files in a batch, that would be the next step. Is fcp scriptable? And, if so, can you write a script that takes a clip, pastes it into a blank 23.98 DVCPro timeline, sets the correct in and out points (i.e, in at the beginning and out 1 before the end), exports it with a specified codec and time base, with a name based on the source clip, and then repeats that as needed?
Thanks for any input --
Robert Schaller

LARGER Exported File sizes

I recently upgraded to LR V2 (also use PS CS3)
For some reason my exported file sizes have increased immensely
Typically I would convert from RAW to TIFF with the following settings:
11" x 17" print size
compression: none
Adobe RGB1998
16 bit
resolution 300 DPI
These files would convert at about 90MB (manageable on my system)
They are now converting at a whopping 400MB (aging system can't handle this!)
Is this the new LR V2 standard, is there some setting I need to change?
Any help greatly appreciated.
Rich

No, you must be doing something wrong there. 300 ppi (NOT DPI!) at 11x17 and 16 bits uncompressed should be 90MB as you can calculate with simple math. If you enable compression (highly recommended for tiffs - it's lossless compression) you should be able to cut that in half.

How can I get firefox to highlight downloaded file when opening containing folder in linux mint 13

When I use open containing folder to locate the download, the file is not highlighted which, given the size of my downloads folder, makes it a chore to locate the file (especially when you've forgotten what it's named).
The file manager I'm using is nemo.
I can manually run nemo with the full path to the file as the second parameter via the command line and it will highlight the file.
Is there a config option somewhere that I can change to pass in the full file path and not just the containing folder path?

I have the exact same problem.
The source of the problem is that on Linux there is no single file manager.
I tried to determine if firefox uses xdg-open or some other technique by searching the source but have not found it yet.
If the proper call is used, for most file explorers this function can be realised.
If xdg-open is used, it should be patched, which I also tried and has not yielded results yet.
What would help me pick this up further is the answer to the question: what does firefox use to open the file in the download manager?

Cannot open .CHM file when Application is running in Service Mode.

Hello All,
I have a compiled HTML help file (.CHM) that i am trying to
integrate with my VB 6.0 project.
I am using RH_ShowHelp function (which uses htmlhelp()) to
launch the Help File.
All is fine when i run my program in Application Mode.
But, when i install my app in Service Mode, (running under
SYSTEM account) - it does not work.
I have tried to use ShellExecute API as well, and that does
not work either.
Does anyone have any suggestions on how to get this working
from services mode?
Is there some other function call or parameters needed...
Any input is appreciated.
Thanks
G

Software executed as a service is usually running as a
background task and
is usually executed not by the current logged-in user but by
a special
default "user" named "System". There are a number of
advantages to having
software run as a service... it can run continuously no
matter who's logged
into the system or even if the system is locked.
Mike
"Captiv8r" <[email protected]> wrote in
message
news:es2ku9$5u3$[email protected]..
> Hi G and welcome to our community
>
> Ummm, really showing my ignorance here. What, ummm,
exactly IS this
"SYSTEM"
> account you are talking about? Is this a Vista thing or
what?
>
> Cheers... Rick
(Who proudly purchases "For Dummies" books!)
>

TechTool Pro copying large "deleted" files when I Time Machine my computer

I have TechTool Pro 5 loaded on my MacBook Pro. I've noticed when I Time Machine the computer, about 4 gig is always (or seems to be) copied over to the time machine drive in files named "Trash Deletes". It puts them in my Application Support folder in my library.
Is this TechTool backing up my emptying the trash - if so, it sure is taking up a lot of space o the time machine drive? Hopefully, I'm wrong here. I use "Timetracker" to see what files are being backed up thru Time Machine.
Anyone else out there notice this?
Thanks,
Larry

Although I own an older version of TT Pro I do not have it installed. I do not remember exactly what they install that is running in the background. What you might do, if it isn't in the documentation, is download Easy Find - CNet Downloads or MacUpdate - and use it to search for "techtool" or "micromat" which should find the item or items. However, I'm almost sure you could disable it in TT Pro's control panel for what to install.

An not import an export file when has cross-schema partition by reference

I'm working on a complex system with about 200 tables stored in *5 schemas* on Oracle 11.2.0.2 (database is installed on a Redhat Linux).
There are lots of partitioned tables, and some are partition by reference, and some of the partition by references are partitioned on cross-schema references (the referenced partitioned table and the table which is partitioned by reference are in 2 different schemas).
When exporting these 5 partitions using data-pump everything goes fine, but I could not find a way to import it in another database without errors. And the problem is on creating tables which are partitioned by cross-schema references, and I get an Insufficient Privilege error.
It seems that the impdp first creates all the tables, and then apply the grants (including references grant) and that causes the problem. If it applied grant statements of each table after creating that table there would be no problem.
Is there any way I can overcome this problem?

This is export script:
declare
h1 NUMBER;
begin
h1 := dbms_datapump.open (operation => 'EXPORT', job_mode => 'SCHEMA', job_name => 'EXPORT000185', version => 'COMPATIBLE');
dbms_datapump.set_parallel(handle => h1, degree => 1);
dbms_datapump.add_file(handle => h1, filename => '910202.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
dbms_datapump.metadata_filter(handle => h1, name => 'SCHEMA_EXPR', value => 'IN(''PAYESH_ACCOUNTING'',''PAYESH_CORE'',''PAYESH_CRM'',''PAYESH_LIFE'',''PAYESH_SECURITY'')');
dbms_datapump.add_file(handle => h1, filename => '910202_db4.DMP', directory => 'DATA_PUMP_DIR', filetype => 1);
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
dbms_datapump.set_parameter(handle => h1, name => 'DATA_ACCESS_METHOD', value => 'AUTOMATIC');
dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
dbms_datapump.detach(handle => h1);
end;
and this is the import script:
declare
h1 NUMBER;
begin
h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'SCHEMA', job_name => 'IMPORT000189', version => 'COMPATIBLE');
dbms_datapump.set_parallel(handle => h1, degree => 1);
dbms_datapump.add_file(handle => h1, filename => '910228.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);
dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
dbms_datapump.add_file(handle => h1, filename => '910128.DMP', directory => 'DATA_PUMP_DIR', filetype => 1);
dbms_datapump.metadata_filter(handle => h1, name => 'SCHEMA_EXPR', value => 'IN(''PAYESH_ACCOUNTING'',''PAYESH_CORE'',''PAYESH_CRM'',''PAYESH_LIFE'',''PAYESH_SECURITY'')');
dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
dbms_datapump.set_parameter(handle => h1, name => 'DATA_ACCESS_METHOD', value => 'AUTOMATIC');
dbms_datapump.set_parameter(handle => h1, name => 'SKIP_UNUSABLE_INDEXES', value => 0);
dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
dbms_datapump.detach(handle => h1);
end;

How can I re-export files when lightroom cant find the files?

I am needing help locating my files after I have already exported them. I orginally saved the photos on my desktop then moved them to my external hard drive. I am needing to re-export the photos in High Res and lightroom cant find the files.

There are two possible solutions I know of:
1. Adobe Lightroom - Find moved or missing files and folders
2. robcole.com - LrRelocationServices
R

Can I prevent Mac OS X Lion from opening previous files when applications are launched?

Since upgrading to Lion each time I click on a file (and the program opens) in addition to the file I clicked on also the most recent file I had open in that program opens also. Is there any way to prevent this action?

Uncheck:

Run a large audio file in application

i tried the code available for the audio file
there was a problem
i could'nt run the code with a 5.5Mb ".wav" file
thanking you

i tried the code available for the audio file
there was a problem
i could'nt run the code with a 5.5Mb ".wav" file
thanking you

Popup blocker issue when trying to open XML publisher report in Excel forma

Hello
I am having the XML report in excel format, when i click on output it was blocking by popup blocker i think and when i click 'Control' button on my keyboard and then press the output it will show the window to save or open the excel. I have added my instance name in the popup blocker setting in the 'Allowed' list but still having the isseu... Anybody have any comments on this...

General-D wrote:
We recently upgraded to TestStand 2012, and we are having trouble with the creating a readable report. We have the results set to .xml. Previously we were using TestStand 4.2 and we were able to convert the .xml to .xls using a stylesheet. But this doesn't work now. I’m getting an error – doesn’t have a top level element. We installed TestStand 2012 using a new enterprise site license, and I wondering if we are missing something on the install. I don't see any TestStand 2012 folder in the C:\Program Files\National Instruments\TestStand xxx. Also is there a better way to create reports that are already converted to .xls, so that anyone can read the reports using excel?
Thanks, Dale
I do not think TestStand ships with a stylesheet to do any such conversion, so I am assuming this is a custom stylesheet that you have either written or gotten from a 3rd party. It's possible something is formatted differently in the xml in TestStand 2012 that your stylesheet is not expecting. You might need to debug and modify your stylesheet to make it work with TestStand 2012.
There should be a TestStand folder. Perhaps you are on a 64-bit OS in which case the folder would be located at:
C:\Program Files (x86)\National Instruments\TestStand xxx
Hope this helps,
-Doug

I want to put header while stroing file in application server

Hi Guru,
   Can anybody tell how to put header while stroing file in application server.
in the below pgm data is coming i want to put heading .if we see in al11 transaction the header should come .plese give on eg in the code itself.its urgent
eg:
material number
100
200
declarations...................................................
tables: bkpf.                          " Accounting Document Header
*"Selection screen elements............................................
parameters:
p_burks like bkpf-bukrs.             " Company Code
select-options:
s_gjahr for bkpf-gjahr.              " Fiscal year
Type declaration of the structure to hold Accounting Document Header*
data:
begin of fs_bkpf,
    bukrs type bkpf-bukrs,             " Company Code
    belnr type bkpf-belnr,             " Accounting Document Number
    gjahr type bkpf-gjahr,             " Fiscal year
    blart type bkpf-blart,             "        Document type
    bldat type bkpf-bldat,             " Document date in document
end of fs_bkpf.
Internal table to hold Accounting Document Header                   *
data:
t_bkpf like standard table
           of fs_bkpf.
Type declaration of the structure to hold file data                 *
data:
begin of fs_table,
    str type string,
end of fs_table.
Internal table to hold file data                                    *
data:
t_table like standard table
            of fs_table.
field-symbols: <fs>.
*" Data declarations...................................................
Work variables                                                      *
data:
w_char(50)      type c,
w_file_name(50) type c value 'YH645_050103'.
select bukrs                           " Company Code
       belnr                           " Accounting Document Number
       gjahr                           " Fiscal year
       blart                           "        Document type
       bldat                           " Document date in document
from bkpf
into table t_bkpf
where bukrs eq p_burks
   and gjahr in s_gjahr.
if sy-subrc eq 0.
loop at t_bkpf into fs_bkpf.
    do.
      assign component sy-index of structure fs_bkpf to <fs>.
      if sy-subrc ne 0.
        exit.
      else.
        move <fs> to w_char.
        if sy-index eq 1.
          fs_table-str = <fs>.
        else.
          concatenate fs_table-str ',' w_char into fs_table-str.
        endif.                         " IF SY-INDEX...
      endif.                           " IF SY-SUBRC...
    enddo.                             " DO...
    append fs_table to t_table.
endloop.                             " LOOP AT T_KNA1...
endif.                                 " IF SY-SUBRC...
open dataset w_file_name for output in text mode encoding default.
loop at t_table into fs_table.
transfer fs_table-str to w_file_name.
endloop.                               " LOOP AT T_TABLE...

Hi,
may i know what kind of heading you want to display?
like date, filename, time etc
then modify the below code:
*&      Form send_statistic
     Create the status Report on application Server
   ---> pv_rlines - Total No of Records in Internal table          *
   ---> pv_slines - Total No of Successful records                 *
   ---> pv_elines - Total No of Errornous records                 *
   ---> pv_path    - File Path where the file to be created        *
   ---> pv_flag    - Flag to check for A/c group                    *
FORM sub_send_statistic USING pv_rlines TYPE int4
                               pv_slines TYPE int4
                               pv_elines TYPE int4
                               pv_path    TYPE salfile-longname
                               pv_name    TYPE rlgrap-filename
                               pv_flag    TYPE char1.
CLEAR : i_tab,
          wa_tab.
Convert date to MM/DD/YYYY format
PERFORM date_convert.
Convert Time to HH:MM:SS format
CONCATENATE sy-uzeit+0(2)
              c_colon
              sy-uzeit+2(2)
              c_colon
              sy-uzeit+4(2)
         INTO v_time1.
Build the Output File name
IF   p_sold = c_x
AND pv_flag = c_x.
    CONCATENATE c_objid
                c_us
                c_z001
                c_us
                sy-datum
                c_us
                sy-uzeit
           INTO v_file.
ENDIF. " IF   p_sold = c_x
IF p_cons = c_x.
    CONCATENATE c_objid
                c_us
                c_z008
                c_us
                sy-datum
                c_us
                sy-uzeit
           INTO v_file.
ELSEIF p_sold = c_x
AND    pv_flag <> c_x.
    CONCATENATE c_objid
                c_us
                sy-datum
                c_us
                sy-uzeit
           INTO v_file.
ENDIF. " IF p_cons = c_x
Build the Complete Output File Path
CONCATENATE pv_path
              c_slash
              v_file
         INTO v_outfile.
Populate the data required for output into an internal table and
then transfer the table contents to file on application server
DATA UPLOAD STATISTICS
wa_tab-rec = text-001.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
TITLE
IF   p_sold = c_x
AND pv_flag <> c_x.
    sy-title = text-t17.
ENDIF. " IF   p_sold = c_x
IF p_sold = c_x
AND pv_flag = c_x.
    sy-title = text-t16.
ENDIF. " IF p_sold = c_x
IF p_cons = c_x
AND pv_flag = c_x.
    sy-title = text-t19.
ENDIF. " IF p_cons = c_x
wa_tab-rec+0(7)   = text-002.
wa_tab-rec+7(60) = sy-title.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
Date & Time
wa_tab-rec+0(5)   = text-012.
CONDENSE v_date NO-GAPS.
wa_tab-rec+6(10) = v_date.
wa_tab-rec+60(10) = text-003.
wa_tab-rec+70(15) = v_time1.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
Folder Name
wa_tab-rec+0(18) = text-005.
wa_tab-rec+19(72) = pv_path.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
File Name
wa_tab-rec+0(18) = text-006.
---Begin of addition -Shivakumar - 09-05-2007--
wa_tab-rec+19(72) = pv_name.
---Begin of addition -Shivakumar - 09-05-2007--
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
Records Read
CLEAR v_count.
v_data   = pv_rlines.
v_count = STRLEN( v_data ).
CONDENSE v_data NO-GAPS.
wa_tab-rec+0(46) = text-007.
wa_tab-rec+47(4) = v_data.
APPEND wa_tab TO i_tab.
CLEAR : wa_tab,
          v_data.
Successfull Records
CLEAR v_count.
v_data   = pv_slines.
v_count = STRLEN( v_data ).
CONDENSE v_data NO-GAPS.
wa_tab-rec+0(46) = text-008.
wa_tab-rec+47(4) = v_data.
APPEND wa_tab TO i_tab.
CLEAR : wa_tab,
        v_data.
Error Records
CLEAR v_count.
v_data   = pv_elines.
v_count = STRLEN( v_data ).
CONDENSE v_data NO-GAPS.
wa_tab-rec+0(46) = text-009.
wa_tab-rec+47(4) = v_data.
APPEND wa_tab TO i_tab.
CLEAR : wa_tab,
          v_data.
v_mesg = text-t04.
IF   p_sold = c_x
AND pv_flag <> c_x.
    MOVE i_tab TO i_file.
ENDIF. " IF   p_sold = c_x
IF p_sold = c_x
AND pv_flag = c_x.
    MOVE i_tab TO i_file1.
ENDIF. " IF p_sold = c_x
IF NOT i_tab IS INITIAL.
Open the file on Application server to write the report
    OPEN DATASET v_outfile
             FOR OUTPUT IN TEXT MODE
        ENCODING DEFAULT MESSAGE v_mesg.
    IF sy-subrc <> 0.
      MESSAGE e000(zconversions) WITH v_mesg.
    ELSE. " IF sy-subrc <> 0
Transfer details to the file on application server
      CLEAR wa_tab.
      LOOP AT i_tab INTO wa_tab.
        TRANSFER wa_tab-rec TO v_outfile.
        CLEAR wa_tab.
      ENDLOOP. " LOOP AT i_tab INTO wa_tab
Close the file
      CLOSE DATASET v_outfile.
    ENDIF. " IF sy-subrc <> 0
ENDIF. " IF NOT i_tab IS INITIAL
ENDFORM.                    " Create_Report

Large PDF file sizes when exporting from InDesign

Hi,
I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
Also, why the file sizes are so different.
For example, I have one ID document that is 3MB.
Exporting it at the smallest file size, the PDF file comes out at 2MB.
Then I have another ID document that is 10MB.
Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
Any ideas on why this is happening and/or how I can reduce the file size.
I've tried adjusting the export compression and other settings but that didn't work.
I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
Thanks for any help,
Cathy

> Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
But they're embedded in the PDF.
> It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
Issue implies there's something wrong, but I think this is just the way
it's supposed to work.
Line drawings, while usually fairly compact, cannot be lossy compressed.
The marketing department, though, may compress their very large TIFF
files as much as they like (with a corresponding loss of quality). It's
entirely possible to compress bitmaps to a smaller size than the
drawings those bitmaps were made from. You could test this yourself.
Just open a few of your EPS drawings in Photoshop, save as TIFF, place
in ID, and try various downsampling schemes. If you downsample enough,
you'll get the size of the PDF below a PDF that uses the same graphics
as line drawing EPS files. But you may have to downsample them beyond
recognition...
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Large export file when application contains a BI Publisher report

Similar Messages

Maybe you are looking for