Large Export Not As Good With 8.0.1? Plus...

So I've exported my 1st video since the update - Large 540. I've exported several times in fact, after quitting and relaunching too. I can immediately see the quality is simply not as good as before. For all intents and purposes, the 540 exports looked almost the same as the 540 imports. Not any more.
Plus every time I export now, the video level adjustments are not being carried over into the export. Has anyone else noticed either of these issues? I'm guessing no since I can't seem to find a thread on this.
Thanks, guys.

Hey Chris, thanks for responding, in my above post I mentioned my troubleshooting:
Since updating my iPhone 5S (T-Mobile) to both 8.0.1 and then 8.0.2 I've had more issues than I've ever had with any iOS in the past (with the exception of iPhone 4 running iOS 7, but clearly that is an older phone, not a 1 year old model like the 5S). Have tried resetting, powering off, etc too by the way.

Similar Messages

When ever I launch my safari, it will stay on for about a minute and then quits on me. It has a "safari quit unexpectedly" dialog box with a bunch of codes that I can send a report to apple. im not very good with this kind of thing, plz help!

Im not very good at troubleshooting, but I have played around with the system preferences. My airport connection is fine as well as the ethernet. Firewall says its not connected, (im not sure if that matters or not?)
I have subtracted my network from the list, restarted, and then put it back and and restarted...nothing seems to be working. Iam in the middle of a correspondace course and i really need my internet back...any suggestions would be greatly appreciated!
Thank you

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Then GULP, check for this...
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.

I have iPad 2 with wifi and no 3G. I want to use iMessage to talk to a friend in Russia from here in the UK. For some reason I can't send messages to her. Please try to make your answers basic and easy to follow as I'm not any good with technology :)

Hi everyone!
I'm wanting to use iMessage to talk to a friend in Russia. She has iPhone 4s and I have ipad2 wifi only. For some reason I can't send messages to her but I can to UK iPhones.
Please could you make your answers easy to understand and in plain English I I'm not good with technology and I'm not up to date on the jargon :)
Thanks in advance to anyone who can help!

Hi everyone!
I'm wanting to use iMessage to talk to a friend in Russia. She has iPhone 4s and I have ipad2 wifi only. For some reason I can't send messages to her but I can to UK iPhones.
Please could you make your answers easy to understand and in plain English I I'm not good with technology and I'm not up to date on the jargon :)
Thanks in advance to anyone who can help!

TS1363 is there an easier way to connect my ipods and phones so that my devices are recognised in my itunes?as i am not ver good with pcs..thanks

i am having trouble with my laptop/itunes finding my devices?i am unable to transfer anything from my itunes to devices as i dont really no what i am doing?is there an easier way to sort this so that my devices can be found and recognised?thankyou

Rather than creating your report directly from a SQL statement use the "Sql Query (PL/SQL Function Body returning Sql Query)" option and re-write your code in PL/SQL. PL/SQL gives you greater control and allows you to test the "null" values and add where clauses to your SQL query based on whether or not a value was selected in the SELECT list.
For example, I have a report parameter screen that has a state drop down list that returns a value of -1 if no state is selected. I can, therefore, code:
IF :P6_STATE_CODE != -1 THEN
query := query + " WHERE state_code = ' ||
:P6_STATE_CODE ;
END IF ;
I have a more complete example if you would like to send me an email ([email protected])
Jeff

Please help, jsp page wants missing ";" but not to good with jsp?

I have a JSP page called ftplogin.jsp
I want the jsp page to call a ftpbean.
It will pass server, username and login into the ftpbean.
It will then set the directory and finaly retrieve a a document from it.
The ftpbean works but my jsp page doesn't. Please help with compilation problem?????
Please also tell me if the syntax of accessing the bean is correct?

<html>
<head>
<title> FTP Login </title>
</head>
<body>
<%@ page import= "ftp.* " %>
<jsp:useBean class="ftp.FtpBean" id="ftpbean" scope="session" />
<%
try
String servername = request.getParameter("serverName");
String username = request.getParameter("username");
String password = request.getParameter("password");
ftpbean.ftpConnect(servername, username, password);
catch(Exception e)
%>
Sorry but your must have entered an incorrect login ingotmation.
You are not allowed to login.
Please leave the ftp portal.
<%
%>
<h1> Welcome to the FTP Login. </h1>
<FORM ACTION="ftplogin.jsp" METHOD=post>
Please login
Enter name of server:
<input type="text" name="servername"><br>
Enter user name?
<input type="text" name="username"><br>
Enter password
<input type="text" name="password"><br>
<input type="submit" name="Submit info">
</FROM>
<%=
try
// set the directory
ftpbean.setDirectory("/home/eland/u6/k3074/w0109699/simple-bean");
catch(Exception e)
System.out.println(e);
%>
<%=
try
// Get the binary file '????' and save it to hard disk
// the name will be 'local_file_name' .
ftpbean.getBinaryFile("accessbean.jsp", "local_file_name", this);
catch(Exception e)
System.out.println(e);
%>
<%=
try
ftpbean.close();
catch(Exception e)
System.out.println(e);
%>
</body>
</html>
Location: /myJSPs/jsp/grid-portal-project/ftplogin.jsp
Internal Servlet Error:
org.apache.jasper.JasperException: Unable to compile Note: sun.tools.javac.Main has been deprecated.
C:\tomcat\jakarta-tomcat-3.3.1\work\DEFAULT\myJSPs\jsp\grid_0002dportal_0002dproject\ftplogin_1.java:110: Missing term.
out.print(
^
C:\tomcat\jakarta-tomcat-3.3.1\work\DEFAULT\myJSPs\jsp\grid_0002dportal_0002dproject\ftplogin_1.java:110: ')' expected.
out.print(
^
C:\tomcat\jakarta-tomcat-3.3.1\work\DEFAULT\myJSPs\jsp\grid_0002dportal_0002dproject\ftplogin_1.java:120: Missing term.
^
C:\tomcat\jakarta-tomcat-3.3.1\work\DEFAULT\myJSPs\jsp\grid_0002dportal_0002dproject\ftplogin_1.java:120: ';' expected.
^
C:\tomcat\jakarta-tomcat-3.3.1\work\DEFAULT\myJSPs\jsp\grid_0002dportal_0002dproject\ftplogin_1.java:121: Invalid expression statement.
^
5 errors, 1 warning
     at org.apache.tomcat.facade.JasperLiaison.javac(JspInterceptor.java:898)
     at org.apache.tomcat.facade.JasperLiaison.processJspFile(JspInterceptor.java:733)
     at org.apache.tomcat.facade.JspInterceptor.requestMap(JspInterceptor.java:506)
     at org.apache.tomcat.core.ContextManager.processRequest(ContextManager.java:968)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:875)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
     at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
     at java.lang.Thread.run(Thread.java:536)

Please note I have solved the compilation problem.
But now getting runtime error. Here is the error:
Error: 500
Location: /myJSPs/jsp/grid-portal-project2/ftplogin.jsp
Internal Servlet Error:
javax.servlet.ServletException
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:460)
     at jsp.grid_0002dportal_0002dproject2.ftplogin_1._jspService(ftplogin_1.java:128)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
     at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
     at org.apache.tomcat.core.Handler.service(Handler.java:235)
     at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
     at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
     at java.lang.Thread.run(Thread.java:536)
Root cause:
java.lang.NullPointerException
     at java.net.Socket.(Socket.java:282)
     at java.net.Socket.(Socket.java:118)
     at ftp.FtpBean.ftpConnect(FtpBean.java:323)
     at ftp.FtpBean.ftpConnect(FtpBean.java:293)
     at jsp.grid_0002dportal_0002dproject2.ftplogin_1._jspService(ftplogin_1.java:91)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
     at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
     at org.apache.tomcat.core.Handler.service(Handler.java:235)
     at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
     at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
     at java.lang.Thread.run(Thread.java:536)
Here is my directory structure for ".jsp" and ".html" pages:
C:\tomcat\jakarta-tomcat-3.3.1\webapps\myJSPs\jsp\grid-portal-project2
Here is my directory structure for java classes,
C:\tomcat\jakarta-tomcat-3.3.1\webapps\myJSPs\WEB-INF\classes
ftp
ftp\FtpBean.java
ftp\FtpBean.class
Here is the modified source code:
<html>
<head>
<title> FTP Login </title>
</head>
<body>
<%@ page import= "ftp.* " %>
<jsp:useBean class="ftp.FtpBean" id="ftpbean" scope="session" />
<%
           String servername = request.getParameter("serverName");
           String username   = request.getParameter("username");
           String password   = request.getParameter("password");
           ftpbean.ftpConnect(servername, username, password);
%>
<h1> Welcome to the FTP Login. </h1>
<FORM ACTION="ftplogin.jsp" METHOD=post>
Please login
Enter name of server:
<input type="text" name="servername"><br>
Enter user name?
<input type="text" name="username"><br>
Enter password
<input type="text" name="password"><br>
<input type="submit" name="Submit info">
</FORM>
<%
           ftpbean.setDirectory("/home/eland/u6/k3074/w0109699/simple-bean");
%>
<%
           ftpbean.getBinaryFile("accessbean.jsp", "local_file_name");
%>
<%
            ftpbean.close();
%>
</body>
</html>

I'm not that good with computers and I need some help....

I downloaded Adobe Reader 9.3.3 for windows 7 so I could print out sheet music (pdf file). When I try to open it using Adobe Reader, this pops up:
"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association for this program in the Default Programs control panel"
and I need to know what to do, to fix it. It might be a small problem, but I have no idea what to do. so could someone tell me in detail, how I'm supposed to fix this? thanks,

Felix2000 wrote:
Actually, when I open Adobe Reader (just by itself) the same message appears, and if I close the pop-up, adobe reader closes.
That is very unusual - it appears that the Reader is not installed correctly. Can you open Control Panel, then Add/Remove Programs, and uninstall Adobe Reader. Then reinstall it from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.3/enu/AdbeRdr933_en_US.exe

Firefox keeps crashing I have tried removing and reinstalling but it still crashing what do I do I am a silver surfer not very good with computers

ON Frid I went on firefox and it kept crashing I kept sending to firfox to fix the problem and it still crashing I have tied removing and then reinstalling the program but the same thing happend I can get opera and internet explorer no problem but i prefer to use firefox

Since a few days we have a lot of crashes with [http://www.trusteer.com/product/trusteer-rapport Trusteer Rapport]. If you have this program, try to disable it and see if that stops the crashing.<br>
You can stop Rapport using Start Menu > Programs > Trusteer Rapport > Stop Rapport<br>
You can ask their helpdesk when an updated version of their product will be made available or, if you don't need this software, uninstall it.<br>
http://www.trusteer.com/support/en/report-problem<br>
If you do not have Rapport, then we need to have a crash report ID. When you send Mozilla a crash report it just puts it in a giant database. We have no way of looking it up without the Report ID. I have no idea what is wrong without looking up the crash report. Please get the Report ID of your latest crash report.<br>
See https://support.mozilla.com/en-US/kb/Firefox%20crashes<br>
or http://kb.mozillazine.org/Firefox_crashes<br>

Excel Export not properly align with latest ExportModeller.dll

Post Author: soonkien
CA Forum: .NET
Hi, Basically, i am having problem exporting the excel due to latest patches from Microsoft. After a patches release by BusinessObjects team on the ExportModeller.dll, found that there are some minor problem (alignment) on exported excel document. In PDF it supposed to beA/C Code & Desc Dr Cr 6510 Daily Expenses 10006512 Cash 1000 In Excel, it exported as A/C Code & Desc Dr Cr 6510 Daily Expenses 1000
6512 Cash 1000anyone can help ???

Hi !
Thanks for your response. I need to generate excel reports(Data only) from my web application. I need latest jars for this. I can't find anywhere. Could you please give exact link.
Note: I can generate from Eclipse 2.0, but I need it from my application.
regards,
Maddy
Edited by: Maddy on Feb 6, 2009 6:36 AM

Hi hello...I have a problem deleting unwanted albums in my phone/photos, any one who can help me do it step by step please.Have patience with me I am not so good with this.

Hi Hello,
     Before I start my question, hope nobody laugh at me, I am not a computer geek, I just a user of a phone.
I have read so many how to do and how to delete albums in the web/google but not anyone of them make sense to me,I hope someone can help me do this step by step.
I am using an iphone 4/operating system 7.0.4
I would like to delete the unwanted albums in my phone under the photo icon, where do i start?
like...   1/ connect the phone to the computer
            2/ click the itune icon
            3/ then whats next?
Please help I could not download anyother app, the system( phone ) always tells me that memory is almost full, I am already frustrated, please help.
If I reset the phone will it erase all the phone numbers and remove all my notes?
Thank you.
<Email Edited by Host>

Hi mylenebar!
Here is an article that will help you remove the desired photos from your phone:
iTunes: Syncing photos
http://support.apple.com/kb/ht4236
To delete synced photos and videos from your device
In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
Click the Photos tab in the resulting window.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
Click Apply.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I have an Apple16 GB with BT Yahoo home pad that had a small box to let me go to mail and another for weather and below them I had my local weather in box,somehow I have erased them and don't know how to get the back ,not very good with computers.

I have an Apple16GB with BT Yahoo home page which had a box for mail and weather and further down I had my local weather, I have touched something and lost these boxes and my home page has changed and I would like to get it back as it was. I have to admit to being useless at computers although I love my I Pad.

Is this the website that you are looking for? According to the very little bit of research that I did on this before responding to you, there have been changes made to the website and to the way that works ...if I read everything correctly.
http://home.bt.com/
Did you have a shortcut to the website on your iPad home screen? If that is what you want to create again, navigate to that website in Safari and then tap the arrow icon next to the address/URL field at the top of the Safari toolbar. Form the window that will pop up, select - Add to Home Screen. That will put an icon on your home screen that will allow you to open directly to that page in Safari when you tap on it.

HT203167 Had to replace my hard drive. Now I can't get into i-tunes to enjoy my list (about 98 songs). Is my music stored in my old hsrd drive? Sorry guys I'm not real good with this comp. stuff. Just want my music back

Had to replace my hard drive. Now I can't get into i-tunes to enjoy or purchase new music.Are my i-tunes stored in my old hard drive ? Do I have to take my old hard drive to a computer store and have them placed on something called a flash drive ? I'm having the same trouble retrieving my Ancestry.com infor.

Yes, all you iTunes data are on the old drive. Get an external enclosure in which you may install the old drive in order to connect it to your computer and copy your iTunes data to your new drive.
Everything is on your old drive unless you copied it to the new drive.

Im trying to upgrade my iphone but it keeps coming up with timed out, im not very good with computers etc can anyone advise me????

im trying to upgrade my iphone4 but it keeps coming up timed out anyone got any ideas what i can do

im trying to upgrade my iphone4 but it keeps coming up timed out anyone got any ideas what i can do

Track automation not in sync with playback

As of today any track automation that I manipulate is out of sync with the track by a beat. So if I adjust low frequency cut to jump from 20Hz to 1kHz at measure 64 1 1 1, when I playback it will make that adjustment at measure 63 4 1 1 instead, despite me looking at the line that's jumped from 20Hz to 1kHz on 64 1 1 1. Am I going crazy?
This doesn't happen to any PREVIOUS track automation, but only new track automation. And it's always a beat early compared to what I assign to it. Also, this is not specific to a certain project, but happens to every project. In other words, I can't make any music really past notes and beat assignments.
Does anyone have any idea what this means?
I don't know if this helps, but here's the current configurations on the Automation menu:
Move automation with regions: never
snap offset: -5 ticks
ramp time: 200 ms
'Write' mode changes to: Touch
Write automatino for (everything is checked off except "solo")
Automation Quick Assic: [X] off

Hi,
Have you add plugins like Adaptive limiter and/or phase linear Eq on Master Out 1-2?
If you add plugin that require Delay conpensation on the Master 1-2.
Also the meter will be delayed...... try to add 5 or more instances of Adaptive Limiter on the master after automation is done...
Maybe this should be related with Graphic delay that is not f compensate in logic 8, I'm not sure but when I add Plugins such as UAD for mastering reason I can see very large difference (not in sync with audio monitoring) on Meters viewing and all pre-recorded automation will be not in sync.
But I'm not sure if this issue is related with only certain project... maybe you have plugin that add latency on Aux or Master out in those projects!
check it.
Thanks
G
g

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

ITunes for Windows freezes when importing a library. I have a large but not huge library of mostly iTunes purchased music on two authorized computers and would like to sync the files, export the library as a playlist, and import it on the other computer.

I am running iTunes for Windows 10.2.2 on Windows 7 Home. I have my iTunes library on both this computer and another authorized machine running Windows 7 Professional. I have a large but not enormous library, as I'm one of those people who doesn't pirate, use torrents, borrow from a dozen friends, or whatever other shades of gray you might imagine. It's mostly iTunes purchases with my old CD collection imported. I have started using the following technique to sync my libraries between my two authorized computers, an ability which you can probably all agree should one day be added to iTunes -- that would be different from Home Sharing, because the music would be stored locally and thus available on the road. With the added benefit of the entire library being backed up on the other machine in real-time. Anyway, when I switch from my desktop to laptop and vice versa, I use the following technique:
Connect both machines to the home network. One machine is the "Active" machine, which has most recently been used for iTunes media, purchases, ratings, etc.
On the "Active" machine, File-->Library-->Export. Save the file as "Library.xml" on the shared drive of the other machine.
Right-click "Library.xml" where it's been saved, and open another file that has two lines in it: The root path of the iTunes library on one machine and the root path of the iTunes library on the other machine.
Do a find/replace all in Notepad to make the library XML file point to where the files will be saved on the "Inactive" machine.
Run Microsoft SyncToy to synchronize the files between both music libraries; the most recent files win. This avoids copying the entire multi-gigabyte library over the network.
Open iTunes on the "Inactive" machine.
Go to Music, Select All, Delete. Keep files.
Do the same for Movies, Music Videos.
Go down to Playlists, select the top one, hold down the delete button until they're all gone.
File-->Library-->Import Playlist. Choose the "Library.xml" file you saved.
First a status bar comes up that says, "Importing library." It has the continually-scrolling progress bar, not the one that starts on the left and steadily creeps right. Then after about 30 seconds, that clears out. Wait. Typically a few minutes. Eventually a status bar will pop up saying something like, "Evaluating gapless playback information," or something like that.
The "Inactive" computer is now the "Active" computer. I can now play my library, it has all my playlists and metadata from the other machine.
Delete all the duplicate playlists named "Music," "Genius," "Purchased," and "iTunes DJ."
Well, I just upgraded to iTunes 10.2.2 a few days ago and tried to do this again like I've done it dozens of times before. Now, iTunes just goes unresponsive after the library import. It got through the "Importing library" bar to the long wait and stopped. I can still multiprocess and use other programs, but iTunes is hovering back there not responding to clicks. Task Manager doesn't seem to think iTunes is using my CPU, and I don't see my hard drive rattling. Any thoughts on why iTunes might hang up when importing a large library?
... Also, please help lobby Apple to come up with a network sync tool built into iTunes for a user with multiple authorized computers. Something different than Home Sharing so I can pull my laptop off the network and still have the synced library with me. And all my metadata changes will sync. The technique I use seems a little kludgey, don't you think?

iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).

Large Export Not As Good With 8.0.1? Plus...

Similar Messages

Maybe you are looking for