Large file on fcpx and trying to export without compressor? want to eventually transfer to dvd?
I have a fairly large file on fcpx and trying to export it without compressor. I tried this and the .mov file was way too large to eventually burn to a dvd. Can someone please help!! I am very new to this program. Do I need compressor? Or when I share>export media is there a setting i can change?
Are you making an authored DVD or a DVD-ROM? If the former, the size of the file doesn't matter only the length of the video.
Similar Messages
-
Can't export my slide show. Is the file too big? Tried to export without music. Now, can't get the music back into it.
If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I am trying to import quicktime audio files into FCPX and it's saying they're not suppored - Help?
I am trying to import quicktime audio files into FCPX and it's saying they're not suppored … Help?
Here is the How to import in itunes 11. Including the Join tracks option.
http://support.apple.com/kb/PH12278
Also if you have imported them then this article gives a good understanding of how to tag these songs
http://samsoft.org.uk/iTunes/audiobooks.asp
the other option would be to use an App like Audiobook Builder to stitch the tracks together in upto 12 hour long sections and sends to itunes automatically. It is available in the App Store. There are others available, Audiobook binder is free -
How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.
See Terence Devlin's thorough explanation here.
-
Greetings all,
I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
var myPresets = app.pdfExportPresets.everyItem().name;
myPresets.unshift("- Select Preset -");
var myWin = new Window('dialog', 'PDF Export Presets');
myWin.orientation = 'row';
with(myWin){
myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
myWin.myPDFExport.selection = 0;
myWin.btnOK = add('button', undefined, 'OK');
myWin.center();
var myWindow = myWin.show();
if(myWindow == true && myWin.myPDFExport.selection.index != 0){
var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
if(myFile != null){
app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
}else{
alert("No File selected");
}else{
alert("No PDF Preset selected");
So far my code does the following:
1) Runs the Multi-Page PDF Import Script
2) Runs PDF Export Script Above
3) Toggles the Template
4) Runs #2 Again
5) Deletes the imported PDF and all pages and toggles template again.
It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine. -
Final cut pro x keeps on saying files are full when trying to export when their not ?
Hi
Final cut pro x keeps on saying files are full when i'm trying to export when they are not full and also what setting do i export them on for a small quicktime?The preset that will give you the smallest file is email and you will have 3 choices of size. Not sure what you consider small, but also take a look at Apple Device.
Your error message is Files are Full or DIsk is Full? Will need more info about your system specs, the format of the clips you're using and your project settings.
Russ -
Import layered ai files into motion and problem when export to psd
has anyone found a way to import rapidly ai files layered into motion?
I tryed to export from ai a psd file in layers but i am allowed to do it only in cmyk, and result is weird, all color changed. any help please?Converting vector layer to shape when the vector layer contains a gradient is not supported. Gradients will come in as a gray fill. If you have more than one fill on a layer you will get both fills but you will loose the blend modes or any opacity masks on the fill. Basically you're stuck with solid color fills and solid color paths when you use Shape to Vector Layer.
Also, each illustrator path you want to turn into a shape must be on a separate layer. Multiple shapes on in the same layer will come in as a shape layer but the paths and fills will not be correct. AE will do it's best to figure out what you want but the chances for multiple paths filled with different colors in the same layer to be converted correctly is remote.
You can, however, add and modify as many gradient fills as you like to a shape layer in AE. -
Transferring large files between win and osx
I have a file larger than 5 gigs, and I am trying to just move it from OSX to Windows XP(bootcamp). Since I had my bootcamp partition formatted at FAT32, I couldn't drag and drop it in to the bootcamp drive since my file too big!
I have an external drive (Western digital 500g), and I tried using that but (I think) since the drive is formatted for Mac OSX, Windows can't see it. I also tried formatting the external as FAT32, but that didn't work since (again) my file is too big.
Is there any way to do this!?!? Compressing?? I have no idea!!
If you could be so kind to help
thank youHi wasaki and welcome to Discussions,
that is quite aproblem you have to face.
Even if you could successfully transfer this file to any FAT32 partition (internal BootCamp or external harddisk) you won't be able to do anything with it, since even when you run Windows the single file size limitation of 4GB on FAT32 partitions would prevent it.
When it is just for storage, you might be able to compress the file (making a ZIP-archive) and, depending on what this file is, may be getting a file size of less than 4GB.
If you have to work with this file in Windows, you can try to split this file into smaller pieces.
Best solution I can think of is to first convert your BootCamp Windows from FAT32 to NTFS file system, which doesn't have this file size limitation.
Here's how-to: http://support.microsoft.com/?scid=kb%3Ben-us%3B307881&x=16&y=9
Before doing this you should consider making a backup of your BootCamp Windows with WinClone http://www.twocanoes.com/winclone/ just in case.
After that you can use either NTFS-3G http://www.ntfs-3g.org/ or better get Paragons NTFS for OSX http://www.paragon-software.com/home/ntfs-mac/ for write access to NTFS from OSX (since OSX itself can only read from NTFS).
I know these are major changes to do, but for a prolonged use of files with these sizes, it's the best I know of.
Good Luck
Stefan -
Need your suggestions - how to display large file in ASCII and HEX
Hello,
I want to create an application which can read in a large file and switch between displaying ASCII and HEX (formatted a particular way). There are two problems here that I'm not quite sure how to solve.
1. How to switch dynamically between ASCII and HEX. Should the HEX formatter be in the document of the JTextArea(or equivalent), or somewhere in the view? If it's in the view then where? I'd rather not read in the file more than once.
2. How to do some kind of paging scheme for huge files. I'd like to read in part of the file and display it, then when the user scrolls to another area, read in that part of the file.
Thanks!
JeffHello,
I want to create an application which can read in a
large file and switch between displaying ASCII and
HEX (formatted a particular way). There are two
problems here that I'm not quite sure how to solve.
1. How to switch dynamically between ASCII and HEX.
Should the HEX formatter be in the document of the
e JTextArea(or equivalent), or somewhere in the view?
If it's in the view then where? I'd rather not read
d in the file more than once.You can iterate over all the characters in the String using String.charAt, cast the chars to ints, and call Integer.toHexValue(...)
>
2. How to do some kind of paging scheme for huge
files. I'd like to read in part of the file and
display it, then when the user scrolls to another
area, read in that part of the file.
Thanks!
Jeff -
Is there a known bug using IE8 and trying to Export an FDM map to Excel?
I'm using 11.1.2 and keep getting an error message.
Nicely written Tony.
OP, sounds like a browser issue (which is documented in the readme's/install guides/...)
First ensure FDM URL you are visiting is setup as trusted.
Second set these settings:
Tools / Internet Options / Security / Trusted Sites / Custom Level
Use Pop-Up Blocker: Off
Downloads / Automatic Prompting: Enable
Downloads / File Download: Enable
Allow Script initiated windows without ... : Enable
Regards,
John A. Booth
http://www.metavero.com
Edited by: Jbooth on May 14, 2011 2:58 PM -
help! cannot figure this out at all
What are the file types? Are you just trying to view these video files? To watch video files that Quicktime doesn't support use VLC media player.
-
I am using SQL Server 2005. I run a report which runs and renders perfectly. But I am unable to export it into any format. It fails with the following error:
Server Error in '/Reports' Application.
The file exists.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.IOException: The file exists.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[IOException: The file exists.
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +924
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
I have seen this question asked several years ago, but have never seen a response that suggests what the issue may be.
I would really appreciate any help in resolving this problem.\
The application has been running from quite some time and this problem started just recently.
Thank You.
-RickHi Rick,
According to your description, the exception “System.IO.IOException: The file exists.” is thrown out when you export the report on report manager.
Generally, the exception is thrown out because there are more than 65535 files without deleting previous temporary files in our temporary directory. Based on my research, it has reported the same issue when exporting the report on report manager, and deleting all
temp files from C:\Windows\Temp could resolve the issue. I would also suggest you remove the temporary files from C:\Users\<username>\AppData\Local\Temp. Please refer to the first comment at this link:
System.IO.IOException: The file exists
Reference:
Path.GetTempFileName Method
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Cannot get any exports to work on PDF's after I bought the membership? Any help?
Hi Dylan,
Are you trying to access the service from Acrobat Reader?
Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
Regards,
Rave -
Best way to move files between FCPX and Motion?
What is the best protocol for bringing files back and forth between Motion and FCPX?
How do I save out from Motion for import to FCP? Is it with Templates?
Whats the drill?
I have looked at both the helps and am coming up short.
Thanks.If you're simply working in generic Motion project, ProRes 422 Quicktime files are the best format for going back and forth.
If you want to save a Motion project to use as a template in FCP X, it has to be one of the template Motion project types. Title, Generator, Effect, Transition. You would select these from the Template Browser that opens first when Motion is initially launched.
If you want to start creating templates, I stronly recommend Ripple Training's "Rigging and Publising" video course for Motion 5. -
I have a large amount of music, in various photo formats and powerpoint, all together in an alphabetized folder. How can I transfer it from my PC to my ipad?
You're not going to just be able to drag a folder over. The iPad has no file manager like computers, so every file has to be associated with an app.
Did you ever sync your iPad with your computer? If so, use iTunes to move the files. However those files will be moved in bits and pieces. For example the music will be moved via the music app. The photos via the photos app. You'll need a powerpoint app to open your power point.
Maybe you are looking for
-
How do I move my iTunes library from my old MBP to my new one??
I followed this procedure to the letter and got nothing: http://support.apple.com/kb/HT4527 I really don't want to trash all of my playlists and things and then have to start over from scratch. This was supposed to work. Getting pretty sick of Apple
-
Updated my iphone 4 to iOS 5.0.1 and then lost all my apps. how can I restore them?
updated my iphone 4 to iOS 5.0.1 and then lost all my apps. how can I restore them?
-
Why does my mouse pointer have a "no" symbol attached?
My mouse pointer has the symbol attached. I can move the pointer, but it does not do anything. It's like it is frozen.
-
Audio volume increases during transitions
The audio volume increases while passing through transitions then decreases when the transition is complete. You can't seem to adjust the volume in the transitions. Anyone know what is causing this or how I can fix it.
-
Can't get movies not to Autoplay
I have created a page with a load of Quicktime movies with poster frames using iWeb, but they all start loading immediately in Safari. I have checked the "autoplay" flags in the js file and they are set to false. What's going on? Many thanks iWeb 3.0