Large files are corrupting when copying to a network share

Hi,
I have a Mac running 10.5 and whenever I copy a file 50MB or over to a network location the file will corrupt. I've tested with a number of files (zip, movie etc) and all seem to be corrupt when I try to run them from the network.
I've swapped the ethernet cable, tried the second network port and I have been moved to a new port on the switch in the server room.
Does anyone have any ideas?
Thank you in advance

Hmmm, open Network Utility in Applications>Utilities>Info tab, select the Interface you're using, copy a big file & see if there are any errors or collisions on the right, or if it always happen after a certain number of packets.
Also, what Link speed & packet size is it using? What Format is the Network Drive?

Similar Messages

Lftp-3.5.4-2 : files are corrupted

It seems that some files are corrupted when transferring them with this latest release of lftp.
I had to use gftp to make my transfers...
Narcisse

kird wrote:
Quote
I have a 2.8 to, what did you get with DOT and CC
I have not had much luck with D.O.T. so I always have it on slow. I was just reading this thread and it sounds promising. But my system runs so stable now I hate to change anything and mess it up.
I have looked but have lost my list of acronyms, what is CC again?

Some installation files are corrupt. Please download a fresh copy and retry

Hello,
I have installed BusinessObjects XI 4 SP02 on server 2008 R2. BO Client tools with sp02 and Patch 8 is also installed.
When tried to install BO Server patch 8 (ENTERPRISE02P_8-10009484) I get this error;
"Some installation files are corrupted. Please download a fresh copy and retry the installation."
while unzipping, WinRAR window throws below message in red;
CRC failed in dunit
\crystalreports.boe.clientactions.java.webpath_bundle-4.0-core-64\content.cab
I have tried twice with fresh copy downloaded on same server and still can't pass this error.
Loading latest patch such as patch 10 is last option since all client machines here are on patch 8.
Has anyone seen this behavior?

Hi,
I'm installing an updated version of Dashboard Design (SP04 Patch 0 - includes FP3). However, during the extraction of the installation file, I get the following message :
"Some installation files are corrupt.
Please download a fresh copy and retry the installation."
I tried to download the application again from SAP Service MarketPlace but the same message rises during installation.
The downloaded file is XCELSIUSENT04_0-20006661.exe
Did anyone manage to correclty install this version ?
Thanks for your feedback.
Hecham

IPod nano Software Download - Files are corrupt

Just purchased an iPod nano. Tried to install the software. When it reached the iTunes portion it flashed a message that "Some installation files are corrupt. Please download a fresh copy and retry the installation." I went to the website and did that. Results were the same. Ideas?
Gateway Windows XP

There is a simple solution to your problem:
INSTALL WINAMP & PLUGIN
The plugin can be found here
http://sourceforge.net/project/showfiles.php?group_id=106528
They also have a Tutorial (which I did not need)
http://www.mlipod.com/?page=documentation
This solution is for free (I mean the software of course ...

Your application files are corrupted!

I recently purchased a new MacBook Pro. I also have a three year old MacBook Pro that the new one is replacing. When the new one was removed from the box, it was running fine. It also asked me some questions concerning it being a replacement, so I said 'sure' and it wanted me to run the Migration Assistant. So I ran the Migration Assistant for the next four hours.
When it was completed, it said everything was copied successfully. Now, whenever I log onto the new MacBook, I receive the following error message:
"Your application files are corrupted! For security reasons please reinstall the application." Then there is an OK button.
I have tried reinstalling the application files (I think). Also, it only happens when I logon. So, I made a new account thinking the account may be the problem, but the new account shows the same error message. I tried holding down the Shift key until the progress bar appeared, but still no luck.
The old MacBook ran, or still runs fine and error free. What is my next step?
Thank you.

Recovery Mode and reinstall.
Or erase and reinstall.
You are not on a MacBook Pro forum.
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because
the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
About TimeMachine backups and Recovery Mode
http://support.apple.com/kb/HT1427
http://www.apple.com/osx/recovery/
OS X Lion and later let you:
Start from OS X Recovery using your Time Machine backup disk. With OS X v10.7.3 and later, Time Machine backs up the Recovery System on your Mac to your backup drive as well. This lets you use your Time Machine drive to start up your Mac if needed.
OS X Recovery:
http://support.apple.com/kb/ht4718
OS X Internet Recovery
Mac models introduced after public availability of OS X Lion include the ability to start up directly from an Internet-based version of the OS X Recovery system. OS X automatically uses this feature when the Recovery System on the hard disk isn't available (such as when your hard disk encounters an issue, or when your hard disk has been replaced or erased). OS X Internet Recovery lets you start your Mac directly from Apple's servers. Starting up from this system performs a quick test of your memory and hard drive to check for hardware issues.
OS X Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, entering a passphrase. Next, OS X Internet Recovery downloads and starts from a Recovery System image. From there, you are offered the same utilities and options as a local Recovery System.
Requirements for reinstalling OS X using Recovery
Reinstalling OS X using OS X Recovery requires broadband access to the Internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the Internet from Apple when OS X Recovery is used for reinstallation
If you use Internet Recovery to reinstall OS X, it installs the version of OS X that originally came with your computer. After installation is finished, use the Mac App Store to install related updates or later versions of OS X that you have previously purchased.

CRVS2010 Beta- Some Installation files are corrupt

Hello,
I am trying to download the CRVS2010 beta. It downloads and when I run the cr4vs2010.exe I get this error:
"Some installation files are corrupt.
Please download a fresh copy and retry the installation"
I have tried redownloading multiple times with different browsers to no avail. I need this downloaded ASAP as we have multiple crystal reports that were ported over from VS 2008.
Please Help.

Hi Burns,
I just downloaded from the US link and ran the installer and it worked for me. It extracted all of the files and it appears the setup engine is almost the last file it extracts.
I believe this is a permission issue. Does it get as far to create this folder:
C:\Program Files (x86)\SAP BusinessObjects\InstallData\logs
or any \SAP BusinessObjects folders?
Try adding the EXE's to the trusted list in your Anti-virus software and/or firewall and or anywhere else Windows may be blocking executables.
Thank you
Don

Mac Mail - IMAP setup - Large attachments are corrupt

Mac Mail - IMAP setup - Large attachments are corrupt
Attachments open fine in webmail
Mailbox rebuild does not help
Appears files over 500k are affected
Multiple users affected
Backend is GroupWise 7
So, I see several posts on this topic, with no solutions.... Is this a known issue according to Apple? If so, can some point me to the official release notes/ bug report??

I have the same problem. When I look at the message with Entourage, I found out that while under IMAP the attachment is not fully downloaded from the exchange server. Entourage gives you the choice to download this file. When I select, the file comes down and opens OK. I heard that some clients have a max size download setting for IMAP but Mac Mail does not. Anyone know how to get around this?

ITunesSetup says some install files are corrupt, iPod wont be read by pc..

My ipod and itune were working fine earlier today and before, but whenever i try to update to the latest verion the install says some install files are corrupt, and now my itunes suddenly no longer reads my ipod... This is like the 20th time this ipod not being read by pc problem has occurred and it's really making me never trust apple with pcs again.

djszapi wrote:1. "On my home partition I only found that viminfo got corrupted twice" Sometimes, it occurs by me too, I delete this file then, but it's a rare situation
2. "I ran the system rescue cd and fsck'ed both partitions" -> Did you get any direct filesystem error message from the system?
3. What happens if you try to delete the corrupted files and restart ? Does it become corrupted too every time?
4."X sometimes won't start, I get a black screen and I need to power down by holding the power button." -> Which driver/kernel/xorg version do you use ? I've experienced such a situation with the nvidia-185.18.31 driver.
Thank you for your quick response.
1. Is it safe to delete the corrupted files in /var/log? I already deleted viminfo after it got corrupted the first time, but it happened again.
2. In the rescue cd, fsck quickly said "it's ok" without checking. Is there a way to force it to check? The man page doesn't say. The longer check I get sometimes when booting ("hasn't been checked in the last X mounts yadda yadda") shows only "fixed write time in the future" from time to time.
3. The Xorg.0.log particularly gets corrupted after the hard restart that I issue when X fails to start and a black screen locks up the pc.
4. xf86-video-ati is 6.12.2-2, kernel26 is 2.6.30.4-1. xorg-server: 1.6.3-2. The black screen issue will be (I hope) solved in the other thread I made (link in first post), but I have the suspicion that both problems are very closely related (one is the cause for the other, or some sort of vicious circle.)

"This ipod cannot be updated. The files are corrupted and unreadable"

This message now appears when I connect my ipod to itunes....
"This ipod cannot be updated. The files are corrupted and unreadable"
The ipod still works and charges, but it will no longer let me add new files to it. The contents of my ipod are still displayed as usual on itunes, so it obviously is reading it to some degree. It advises me to run a chkdsk utility, but I have no idea how to do this.
Has anyone encountered a similar problem? Does anyone know how I can fix this problem?
Many thanks

If your iPod is corrupt then you have no choice but to restore it.
Before you do that, you may have some success getting the music off it and onto your hard drive again.
Check out the instructions/suggestions here.
Music from iPod to computer.

How do I find where my larger files are all at Once

Like all I am getting close to having a full HD. Is there a way to tell where all my large files are all at the same time without having to go to each folder, file, application
Thx Much

Thx Much, I am aware of all that, just wondering is there is any software freeware, widget that could tell me where all my very large files are at the same time with having to go through all the folders/files/libraries..
It is amazing that many large files are stored in the strangest places.
Jack

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt. I would rather have my 2008 Dell at this point. what is wrong with this thing

I HATE my new MACBOOK PRO, it will not let me open any PDF files and I downloaded the ADOBE READER three freaking times and it keeps saying that all the files are corrupt or damaged. I would rather have my 2008 Dell at this point. what is wrong with this thing

Perhaps the PDF files are corrupted.
Hit the command key and spacebar, a blue Spotlight in the upper right hand corner appears, now type Preview and press return on the Preview program.
Now you can try opening the PDF's from the file menu and see what's going on.
If they are corrupted, perhaps they are trojans from your Windows PC or gotten from a bad location online.
Download the free ClamXav and run a scan on the possibly infected folder.

Final cut pro x keeps on saying files are full when trying to export when their not ?

Hi
Final cut pro x keeps on saying files are full when i'm trying to export when they are not full and also what setting do i export them on for a small quicktime?

The preset that will give you the smallest file is email and you will have 3 choices of size. Not sure what you consider small, but also take a look at Apple Device.
Your error message is Files are Full or DIsk is Full? Will need more info about your system specs, the format of the clips you're using and your project settings.
Russ

Externally edited files are corrupted

I'm trying to put together a book of images and I quite like what iPhoto offers. However, after importing the pics into the book template and arranging them, they needed some cropping and tweaking. I double click to open the images in Photoshop CS5, edit and close. The updated image is now saved as a separate file in iPhoto.
I then tried to create a PDF of the book and iPhoto reports that files are corrupted or missing - always the files I edited in Photoshop.
Anyone else experience this?
Cheers,
SNaP!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
Regards
TD

CRVS2010 Beta -CRforNET40_x86 - I get 'Some installation files are corrupt'

Hi,
I just downloaded CRforNET40_x86 from the "Blogs" page and got the 'Some installation files are corrupt' error message on trying to run/extract the files.
The message also asked me to download the file again but it would seem pointless as I didn't get any download errors so I'm assuming that the file may be corrupted. Would you please have it checked so that I can try downloading it again.
Thanks,
Michael
Edited by: turbo56 on Aug 4, 2010 6:19 PM

Sorry Ludek for not specifying the link.
I downloaded the file from "/people/blair.wheadon/blog/2010/07/29/crystal-reports-for-visual-studio-2010-beta-2-and-runtimes-now-availableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529".
Anyhow, I decided to download it again and this time it did run properly/extract and install. Don't know why it didn't work/run the first time but the main thing is that it worked.
Thanks for your prompt response.

Application files are corrupted. How do I reinstall application files?

I own the macbook Pro. My application files are corrupted. How do I reinstall them?

"Any more ideas?"
The point of my reply was for you to apply the 10.3.9 Combo Update over your installation. Repairing Permissions is always a good idea before and after any update or upgrade. Did you try this and still having Java problems/errors?
This will not harm anything to apply the Combo update over your OS.
You did not post which version of 10.3 you are using but you may wish to check to see if this Apple Knowledge Base article applies to your situation:
http://support.apple.com/kb/TS1537
littleshoulders
Message was edited by: littleshoulders

Large files are corrupting when copying to a network share

Similar Messages

Maybe you are looking for