Large Format Output

I have a 60 second animation that I need to output at 5760 x 48 pixels for an animated billboard. Final Cut's sequence limit is 4000 pixels, Photoshop's is 5000, Flash is 2880, Motion says 4096. Can anyone think of a workaround or a program that will support a file that large?

I have a 60 second animation that I need to output at 5760 x 48 pixels for an animated billboard.
When you get some spare time (learning AE is going t set you back a bit) I'd suggest you carefully look through the docos for the target signage system. You probably do not really need to be that accurate. The playback system that feed data to the sign will be programmed (probably) to accept all kinds of formats and aspect ratios. The mfr would be insane to require only one specific format unless they are also selling proprietary software for building the files.
Digital signage is a h-u-g-e industry.
bogiesan

Similar Messages

InDesign CS 5 vs Illustrator CS 5 large format output help needed

Ok here's the deal, I work in a small agency in Dubai, we have many nationalities and over here so, so many people use Illustrator for everything, and it drives me up the wall.
Anyway we had 40 2x3 metre boards to be designed and the lcient asked for them to be delivered as Illustrator EPS files. So each one would have to be done seperately with high res images in and this took days. Whereas in InDEsign it would take a quarter of that time.
They sare saying if I supply high res PDFs from InDesign the quality isn't as good. Something to do with rasterization?
Does anyoen know if this is true as I need some hard facts abotu this before I can tackle my boss and the client next time and eventually get everyone using InDesign instead of Illustrator, which is pretty stupid.
One more thing, one of the guys here did a 3 metre high board in Photoshop and it came out fine (if not a massive file) and he says he knows for a fact if it was done in InDesign it wouldn't output as well.
Any thoughts or help would be greatly received,
Thanks!
Dave

ComputerGeekette,
I don't doubt for one second that this is indeed your experience and that you have settled into what I can best describe as a very degenerate workflow in order to get your job done under the conditions you describe.
Having said that, I must say that your experience and the fact that you believe that this is the best workflow you can achieve given the conditions is an exceptionally sad commentary on the state of the graphic arts industry in general and the printing industry in particular. The workflow you describe is a “lowest common denominator” workflow that almost guarantees that in most cases in which you have anything other than pure raster imagery to print, you will get results that are not optimal.
You should be able to use PDF/X-4 files as the means of passing artwork from your clients to you and then subsequently from you to your printers. Source files (i.e., native Illustrator, InDesign, and Photoshop files as well as assets such as imagery and fonts) should not be the currency of the realm here.
When I need to go “outside” to print (for anything my fleet of laser printers and wide format printers can't handle including offset printing jobs), I typically go and interview the print service provider and provide a sample job to print using a PDF/X-4 job with live transparency and color managment. If they cannot handle it in their normal workflow or cannot adjust to the twenty first century very rapidly, I move on to another print service provider. For better or worse, there are plenty of very hungry printers out there and at least some of them realize that unless they learn to deal with modern workflows, they will be history like the many thousands of other such printers that have gone belly-up over the last half dozen years!
- Dov

How can I make a photograph large enough for large format printing?

Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
I am aware of rasterize and vectors, but please could you explain how they work, and if that is my solution.
I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me

Let e try to explain briefly...
"Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
- The actual resolution necessary to print grand format depends on the printer. Most of the large-to-grand format inkjets print at 600dpi. Photoshop is the better application for sizig images, while Illustrator is the better application for sizing graphics ( ie., logos ) and type. Use Illustrator to layout both the images and the graphics. You typically would send the print vendor an appropriate PDF file ( that can be scaled ).
I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
I am aware of rasterize and vectors, but please could you explain how they work, and if that is my solution.
I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
- You most certainly can use photographs in large format. The problem is you will have to setup the file scaled down. In some cases, the output will have to be assembled in sections. Let's take a section of 10 feet high x 36 feet long. You'd setup your Illustrator file 2.5 feet high x 9 feet long ( 25% ) or 30 inch x 108 inch to be enlarged at the printer 400%. Each time you enlarge an image 2x you cut its resolution in half. So, an image starting at 300ppi will end up at 75ppi. So, your image file would need to be 300ppi at 25%. 75ppi sounds low, right? In actuality, it is enough to print grand format and the image appears smooth. Now the question becomes, how do I get an image large enough in Photoshop? Remember, you'll need a 30" x 108" image plus bleed at 300ppi ( Placed in Illustrator at 100% ). There are applications like Genuine Fractals or Image Doctor's "Blowup" which will enlarge an image file without degradation. I use Genuine Fractals and the results are phenominal.
This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me "
- It'll become easier as you do more of this type of work. The amount you end up scaling is up to you. There are limitations as to how big a document can be in Illustrator. I like 25% because it is similar to working on a print ad that is high resolution. Another thing to remember is set your raster effects to High in Illustrator. They will be retained in the PDF which will be enlarged 400% and the ending raster effects will be 75ppi just like the image. Also, feel free to contact the print vendor and ask them questions. You could send them what I've written here and see if they agree. Let me know if you have any further questions.

Looking to purchase large format printer

I print photos on my HP 2610 and they are great! I would like to upgrade to a large format printer (24"). Which HP product would be a good entry level ($wise) that would print equal quality as my 2610?

Could you use pdf995 to intercept the print output and save directly to a pdf file??

Initial-page-number not working in RTF format output

A report has a parameter for the page number to start with. In rtf template below code is present
<?initial-page-number:xdoxslt:ifelse(P_FIRST_PAGE_NUM!=’’,number(P_FIRST_PAGE_NUM),1)?>
The report page number starts with the value which we pass in p_first_page_num in PDF format but in rtf format output it always starts with 1.
Is initial-page-number not supported in RTF format output ? If not then what is the alternative?

the method u followed is fine as need a page number staring from a specify value which u input.
@section is only for resetting page number to 1 for every group and for that pdf and ppt will be fine but only for rtf u need to use that ( pressing F9).
u can use @section and initial page number combined but they give u same output as get now. rtf output wont support it will only reset 1 every time
What ever u do rtf output wont support initial page number code ..........
i mentioned that F9 work around to mention that it is the only work around u have upto now to control rtf output with regards to page number.
Guru's correct me if i am wrong. wait for a day or two if some one from guru's confirm it .
If u need real confirmation raise an SR oracle will let u know .

I want to order a second copy of an iPhoto book. Thought created in the smaller format only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

I want to order a second copy of an existing iPhoto book. Though created in the smaller format now only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

To change a book size duplicate it (select the book in the source pane and press command and D) since text flow and picture placements can change due to the size differences - then click on change themes, select the same theme and the new size
check it carefully
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Unable to print from Photoshop CS4 in an iMac OS 10.6.3 to large format printer Epson 11880

Hi there! I was wondering if you could help me with this case.
Old computer: Mac G4 (purchased in 2002)
Old OS: OS 10.4.11 (Tiger)
CPU: Dual 1.25 GHz
Memory: 2 RAM
Software: Photoshop 7
Hardware: Large format printer: Epson 11880 (64” wide monster). Prints large posters, banners, etc.
As you can see, it is time for an upgrade...
New computer: iMac
New OS: OS 10.6.3 (Snow Leopard)
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
Memory: 16 GB
Software: Photoshop CS4
Hardware: Large format printer: Epson 11880
Situation: We hooked up everything and managed to print on the 11880 printer 2 times and printed two large format prints. On the third attempt, we encountered a serious problem...
Problem: After opening a file in Photoshop and sending it out for printing in the large format Epson printer, the file goes to the printer queue and stays there for 6 seconds, and then it disappears. It does not print. :-(
What we have done so far:
We made sure we downloaded the latest printer driver for this printer from Epson’s website.
The printer driver is correct. The computer talks to the printer and we are able to execute all the commands from the printer utilities panel. (i.e. check ink levels, clean heads, etc.)
And yes, the printer is okay, because we have been using it with the old G4 machine for about a year.
This problem got so frustrating, that we thought that something we transferred during the computer installation might be the culprit. So at one point we erased the hard drive on the new computer and reinstalled the operating system, and have not put any files from any old computers into this machine. The computer has nothing else in it. Except: The operating systems, and the Mac applications that come when the Mac comes out of the box. The only other program installed in it is Photoshop CS4 and the printer driver.
We were wondering if this was just a printing problem, period. So we added a small printer to the computer - and old Epson 2200 we have. We sent a file to this printer and there is not problem.
Perhaps, the file size might have been an issue? It does not matter. We can send a large 60 MB file to the printer or a small photograph measuring only 8 x 10, and these will linger in the queue for 6 seconds, and disappear never to be printed.
Temporary relief came when we got rid of Adobe Photoshop’s Preferences file. After getting rid of the file and allowing Photoshop to reconstruct it, we managed to print two large files on the printer. Then it failed again. Tried getting rid of the preferences again, and the trick did not work anymore. :-(
Another temporary relief came when we created another user in the computer. On the new user account it printed again a couple of times only to fail later.
And yes, the printer WILL print from other Mac programs. If for instance, we open a file on Preview, and send it to the printer and the file will be printed. And yes, we have managed to print very large files with this method.
In the last couple of days, we have spent 3 hours on the phone with the guys at Epson. They verified the driver and because the computer seems to be communicating with the printer and printing from other Mac applications, they suspected that the problem is with Adobe.
We called Adobe once, and spent 30 minutes with an Indian fellow who concluded that the problem was with how the computer handles the spooling. According to him, Photoshop sends the file to the computer and the computer seems to get rid of it. So he passed the buck and told us that the problem was with Apple.
We called Apple and spoke for 30 minutes with a friendly technician, who transferred us to a higher level techno-geek. I spent 1 more hour on the phone with Apple, and we tried everything. We went through Adobe’s knowledgebase and tried every suggested solution (see Adobe’s KB406452). It was with him that we found a temporary fix of removing the Preferences file, but the solution was short lived. He finally thought the problem was with Adobe as the printer is able to print from all applications EXCEPT Adobe Photoshop.
We called Adobe for the second time...and after waiting on hold from 1 entire hour, we got an Indian technician, that bless his heart, had a very thick accent and had no expertise, in my opinion. He was good at collecting data and he even made me share my computer screen so that he could troubleshoot the problem. After being constantly put on hold by him (because he had to consult with someone else), he passed the buck and said that it was Apple’s problem. I just told him that it was not as likely because all programs print EXCEPT Photoshop. After trying what I would consider a “hail Mary” of DELETING all the printers from my Library folder, and not replacing them, he recorded a case number for another Adobe technician to call us in a few days.
Because the above technician completely blew the Library, I just erased and reinstalled the OS. This time, I did not allow the OS to be updated - from 10.6.2 (that comes in the box), to 10.6.3. We tried printing using the 10.6.2 and had the same problem. :-(
Conclusion: I think it is a problem of Adobe CS4 not getting along with Apple’s new operating system. The Epson printer is doing fine, because it has been a product that has been in the market for almost 3 years. What is disappointing is that none of the companies wants to man up and say that it is a problem and that they are willing to work on it. Instead they pass the buck to the next company.
I can’t believe I am the only person experiencing this. Has anyone had this problem, and have you found a solution or workaround for it?

Dear Doyle, John and Gator Soup,
Thank you for your kind replies to my problem.
PS is assigned 70% RAM. In fact, I have never had so much RAM in my life. Files open at lightning fast speed! :-) We have never considered a RIP as we do not have an intense workload. In fact all the files we have tried to print print well on our old G4 with Tiger and Photoshop 7, which at the moment has saved our butt. However it would be nice to get the new faster machine with Photoshop CS4 to talk to the Epson 11880.
Yes, we are printing directly to the printer. We have hooked up the computer via a 6 ft USB cable to the unit.
The specs and pixel dimensions of a typical file we print are:
Type of file: tif (in this case it is an RGB file) // However, we avoid any color management from the computer or the printer when printing it at this time.
File size: 60 MB
Pixel size: 6796 x 3100
Print size: 34" x 16" @ 200 dpi
I have not tried saving it as a pdf yet. Will try that next.
I did go to the Console on the Mac though, and recorded its activity between 5:14 pm - 5:19 pm when I tried to print a file.
Remember, the symptoms are: We send a file to the printer...The file goes to the printer queue, and it lingers there for 6 seconds. The file then disappears.
Although there is a cryptic message of "invalid colorspace" in the log, I don't believe that the file is corrupt. First because we have tried several files, second because smaller versions of these can be printed in another Epson 2200 printer, and third because the large format images can still be printed using our old G4 machine with Tiger and Photoshop 7.
This might provide me with extra ammunition for when I call both Adobe and Apple on Monday. Apple has been quite good on customer support - particularly when they upgrade you to higher level geeks. ;-) Do you have any idea I what time I should call Adobe so that I can get people on the western hemisphere to answer the phone? It seems that after a certain time they start speaking with an Indian accent over there.
Enclosed, for whatever is worth, is the Console's log:
5/15/10 5:14:46 PM System Preferences[2947] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
5/15/10 5:14:46 PM [0x0-0xf00f0].com.apple.systempreferences[2947] System Preferences: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
5/15/10 5:14:46 PM System Preferences[2947] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4b00880: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14390: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14410: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14490: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:08 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] file://localhost/Applications/Adobe P
5/15/10 5:19:34 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Sat May 15 17:19:34 Norm-Nielsens-iMac.local Adobe Photoshop CS4[2991] <Error>: CGImageCreate: invalid image colorspace: NULL.

Why can I no longer text message on the larger format by turning my phone?

Why can I no longer text message on the larger format by turning my phone on its side?

Hi,
Since iChat 6 the SMS option in the Menus has disappeared.
However if you add the number to a Buddy List as if it were Screen Name but with the leading +1 (as in +1234567890) it will work over AIM.
It only works to US phones on some Carriers.
9:44 pm Wednesday; January 8, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

1.4.2 - What is the correct way to format output in the java.io.PrintStream

With Java 1.4.2:
What is the correct way to format output in the java.io.PrintStream?
The following is incorrect, even though it is still used in the The JavaTM Tutorial at: http://java.sun.com/docs/books/tutorial/essential/
System.out.formatThis returns "cannot resolve the method 'format'"
Any detailed suggestions or information is greatly appreciated.

The following is incorrect, even though it is still
used in the The JavaTM Tutorial at:
http://java.sun.com/docs/books/tutorial/essential/
The whole format thing has been introduced in 1.5. The tutorial also states it's been "updated to 1.5.".
That's all I've got to say for I don't know how you can format a PrintWriter, let alone a PrintStream, prior to 1.5. I'm not really sure there is any way. Any "legacy way", that is. There almost certainly are third-party API which achieve similar results.

How do I place a large format image into Illustrator

I am trying to place a large format image that I created in Photoshop into Illustrator. I have tried PSD, TIFF, and JPG. I have even cropped down the image into smaller portions to try to make it easier to work with. Every time I try to Place the image I get a dialogue box saying,"The file 'Water 1.jpg' is in an unknown format and cannot be opened.' Can anyone help with this?

I would guess the file is simply too big. Make sure the document is in RGB mode. If I were you, I would never submit a file that size at 300ppi for large format. Large or grand format printers only need around 100 to 144ppi at 100% final size. Also, set the Illustrator file up at 25% scale and place the image at 25% @ 300ppi ( image resolution ends up around 75ppi which is still plenty when enlarged 400% to final size ). Getting back to the original error message, it could be the system is running out of both RAM and scratch disk space and cannot deal with the preview required. Better to scale the file down for large format.

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

List format output to excel sheet

Hi,
I have a report output in list format. I need to download that into excel sheet. Is it possible to download a list format output to excel sheet or shall I need to convert that into grid format?
Thanks Barnita.

HI,
Use Menu path
List->Save/Send->File path

How does one print to a Large Format Network Printer in Adobe Reader X?

I have just installed Adobe Reader X on a machine that previously had Adobe Reader 9 (I had to format the hard drive so this is a fresh installation). When attempting to print to a large format Printer (36x24) across the network I cannot change the paper size. Despite attempting to change the paper size to a number of different configurations Adobe X will not print anything but 8.5"x11.0" (which is the default paper size on the local printer). I have tried making the network printer the default printer and that does not make any difference. Everything worked fine with Adobe Reader 9 but not X. Can anyone offer any suggestions?
Also, I can print to both the local printer and the large format network printer fine through other applications.
Thanks.
Ben

Just finished testing 10.10 printing via a Windows 2008 R2 print share. I also found that when trying to add the printer using CUPS I would get an authentication error. But if I added the printer using the Windows section of the Add printer pane, then I was able to print fine.
So with you mentioning that using the Windows section of the Add printer window has never worked (which is interesting because it's always worked for me) I want to suggest another approach to adding the printer, still using the Add printer window. With this window open you can right-click on the toolbar and select Customize Toolbar. You can then drag the Advanced icon to the toolbar. Then when you select this, you can set the Type menu to "Windows via spoolss" and then enter the URL as smb://servername/sharename. Select the supporting driver and click Add to complete.
Then when you select to print for the first time using this printer you will be prompted to authenticate. Enter the account details, set the save to Keychain option and OK to send the print job.
This worked fine for me and creates the same queue as using the Windows add printer setting. Curious to hear if this gets your co-worker printing again.

SQL Developer formatted output

Hello,
Could you please help me in getting the formatted output on Oracle sql developer tool, I am not able to find andy options to set
I have copy paste the result from this tool to excel, I am getting plain text out put, I have more columns and readablity is not there
Regards,
Neil
Edited by: NeilCSE on Apr 6, 2010 6:01 AM

Hi,
try this.
I am on windows
SQL> spool c:\emp_text.txt;
Started spooling to c:\emp_text.txt
SQL> select ename||'|'||empno from emp;
ENAME||'|'||EMPNO
JAMES|7900
FORD|7902
MILLER|7934
SMITH|7369
ALLEN|7499
WARD|7521
JONES|7566
MARTIN|7654
BLAKE|7698
CLARK|7782
SCOTT|7788
KING|7839
TURNER|7844
ADAMS|7876
14 rows selected
SQL> spool off;
Stopped spooling to c:\emp_text.txtThen open in excel as delimeted by |
Regards,
Bhushan

How to get XML format output from Hyperion Financial Reporting

Dears,
We are using Hyperion Financial Reporting to replace FSG in fusion. I found that Hyperion FR report can be exported to html/excel/pdf format. However, I would like the report to export to xml format.It means I only need the xml data source.
Anyone who knows how to get the xml format output from Hyperion FR, is there any avaiable API?

I think if you export the report, you will be able to open the .des file in Notepad/Wordpad and see xml content.

Large Format Output

Similar Messages

Maybe you are looking for