Large Hard disk

I am attempting to Install a Western Digital 45 GB Hard disk. It is only coming up in the format partition utility as 10.5 GB.
<BR>
The drive specs ar at.
http://www.wdc.com/products/drives/wd450aa.html
Any help appreciated.
Jon

Hi,
I saw the reply by Caryl Takorvian of Sun support about the IDE support.
I have a few comments I could add to this:
Running on a US10, Solaris 2.8,
I have been working at trying to integrate a WD 45 GB Caviar drive. This is a nice drive. Solaris initially identifies it as a 10 GB drive, and after having gone through numerous attempts to make format set the drive up to be correct size.
However, it looks like format is pretty broken. It makes me wonder whether anybody ever checks this s/w:
a) analyze really doesn't delete all the label information when you do a verify;
b) the label command in the partition sub command doesn't write a
new partition table on the disk. save doesn't do it either;
c) the format - verify command will only report the primary label, won't report backup labels
d) the save command doesn't write the new values to the disk;
e) you can create a new "type" that applies to the disk, but no command actually writes that command information to the disk;
f) format - format command says the disk isn't supported and you have to get a utility from the manufacturer (yeah, right);
g) when you are in partition and tell it to write the label, there is no other command to verify that it actually happened;
Maybe I am doing something wrong, so any suggestions would be appreciated!
Victor

Similar Messages

I need a larger hard disk for my mac book pro

Hi my mac Book pro 2.53GHz 13' needs a larger hard disk do you have any suggestion? I'm thinking about a 750/1T but which brand/model works great? I do music production.
L

For music production, you'll probably want a 7200RPM drive, and all the current 1TB units are 5200 or 5400RPM. Consider the 750GB 7200RPM Seagate:
http://eshop.macsales.com/item/Seagate/ST9750420AS/

Time Machine backup created on Mac with a large hard disk. What happens when restore to MacBook Air with small SSD drive?

What if a Time Machine backup was created on a Mac with a large hard disk, e.g. 500GB iMac - and I buy a new MacBook Air with a small SSD hard disk e.g 128GB. What happens when I need to use the larger Time Machine file to set up the new MacBook Air? What happens to all those files that can't fit on the smaller SSD drive?

It is not the HD size, but rather the size of the data it contains. If you right-click your 500GB drive and select "Get Info" you can see how much is actually being used.
Naturally if you are using more space than the new drive has, then you have to make some choices about what you want to keep and what you want to keep archived.
I don't know what options are available but you may simply have to do a manual restore of files you want, in groups.

Migrating solaris 10 to larger hard disk

Hi all,
I not sure if the word "migrating" should be used. Here is the case, we have a blade server which only have 2 local slot for hdd which is already occupied. The hdd is mirrored using hardware raid. Recently we encountered insufficient disk space and was thinking to increase the disk space. Somehow external storage is not an option here. The management bought two larger size hard disk and questioning if we can migrate/clone the running production OS to this new larger hard disk. The filesystem used is UFS and it is x86 machine. Please advise if it can be done using UFSdump. If yes, how about the partition size issue? Will it expanded? TQVM.

Checked with the hardware engineer and they confirm that the RAID can be synced one by one without breaking it. Means, we can take out hdd2 while hdd1 still in the server with RAID1. Then we put in hdd3 (new larger size hdd) and let it sync. After that repeat the steps with hdd1 > hdd4. I found the command growfs can expand the mountpoint. Can anyone share any foresee concerns and is it workable?

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How do I copy my time machine back up from a smaller Hard disk to a larger hard disk; so that I can then continue to back up, through Time machine, on the larger hard disk?

I am using time machine for backing up on an external hard disk. This has now become full and every back up results in the deletion of the first back up on the hard drive.
I have bought a larger hard drive now and am trying to copy the back up from the smaller hard drive to the new larger hard drive, using Finder. This is not happening and the message I am getting is
"The volume has the wrong case sensitivity for a back up"

Hello UmeshNB,
Thanks for the question. Based on what you stated, it seems like you are not able to move a backup to another drive. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Time Machine: How to transfer backups from the current backup drive to a new backup drive - Apple Support
If it is not formatted as Mac OS Extended (Journaled), reformat the drive as Mac OS Extended (Journaled) with a GUID partition. If you do not know how, see the steps in this article.
If the drive is formatted as Mac OS Extended but without journaling, OS X may state that "the volume has the wrong case sensitivity" to be used as a back up disk.
Thanks for using Apple Support Communities.
Cheers,
Mario

Support for larger hard disks...?

just a question regarding hard disk compatibility...
i am planning to purchase a faster, much larger capacity hard disk, but i always think a lot regarding compatibility.
from my previous experience, i used a driver from a known hd company but unfortunately it ruined my old board. Now, i just have to be sure whether that hard disk that i will purchase will run in my system.
What are the things that i should know before i purchase a new one? (i am planning to purchase a 40Gb 7200 hard disk)

... so, what motherboard do you have, and what BIOS-version? I would be VERY surprised if your new HDD would NOT be supported, btw!
Hans

Supported way to migrate to larger hard disk

I am a happy, no exctatic owner of a Macbook Pro 15 inch 2.6, purchased in December 2012.
The 750 GB hard disk is a bit tight.
So I'm looking at getting a 1.5 TB drive and migrating to it.
I don't want to lose my restore partion or anything else I've already done.
How should I go about it?
I have thought of using:
Carbon Copy for Mac
Clonezilla
Booting a Live CD Linux and using dd
Anyone done what I'm trying to do?
Configuration:
Main boot is Mac with refit add in to manage boots.
200 MB for Mac boot
200 MB for bootcamp Windows
The rest of the drive is allocated for Centos 6.4 I use grub as the boot manager for centos and windows.
Hope this is enough.

Mine looks exactly like yours.
What I'm hoping to clone is the entire hard disk.
I've followed CCC guidelines and set up a recovery partition and copied the Mac OS parition.
I was hoping to copy bootcamp and centos across as well, but so far no luck.
Though I know bootcamp and the centos stuff are accessible in other ways.
I could just as easily boot centos and use dd to do the job here. Partition up the new disk before hand using the apple disk tool and dd parition by parition using centos. Seems like an awful lot of work though.
Since Mac OS is open source based, I assume I could do this job with dd running under the main OS. Problem there is fdisk works a little differently.
I know i can if successfully clone non Mac paritions either before or after the disk switch. I'm a Unix/Linux geek after all.
Thanks for all the good input.

How can I see large hard disk files

I'm having problems with hard disk file space and would like to be able to see a list of files/documents sorted by size. This would allow me to focus on the big spenders and help monitor usage. Is there an easy way to accomplish this?

Use a freeware program called WhatSize.
Hope this helps...

MSI-6167 and large Hard disks

I have a 500MHz AMD Athlon on an MS-6167 Mainboard (Irongate Chipset) and I intend to add a new hard disk to my system, preferrably an 80GB Western Digital. Can my mainboard support a disk of such capacity? If not, what disk size would you recommend as a safe solution?
Thanks in advance.

You'll be pleased to hear I have a 120GB IBM DeskStar running happily on my MS-6167 Athlon system. I have it configured as the primary IDE master, with my old hard disk as the slave device. :D
If you get any troubles, I recommend ensuring your MSI chipset and BIOS drivers are up to date, using this web site (I am using the most recent BIOS version - 1.6).
Good luck!
PSdiE
http://mp3.com/psdie

HOW DO I Move time machine to a larger hard disk

My time machine disk has two partions for the twp OS I am running --Snow leopard on internal and Lion on external disk
Error message saying that there is not enough room toback up Lion. How to I move the contents of time machine to a larger disk?

See this Excellent Link by Pondini
http://pondini.org/TM/18.html
From FAQs Here
http://pondini.org/OSX/Home.html

Upgrade 2009 Mac Pro Hard Disk to a larger Hard Disk

Hi there, I am looking to upgrade my 2009 Mac Pro 1TB HDD to a 3TB HDD. I have a successfull Time Machine Backup, If I swap the HDDS, boot into OS Snow Leopard, format the new 3TB then restore from a TM backup, will it account for the new extra space? E.g, will I see a full 3TB (or there abouts) as usuable or will I see a kind of 1TB Partition with the same free space I had before, requiring the use of something like Disk Utility to Extend it? Any help would be appreciated! Many Thanks!
Ash

Still on Snow Leopard so yes.
My advise: use two drives: leaving your current as is.
One for system, second for data.
Also invest in Carbon Copy Cloner and you can also make a bootable copy, and selectively copy system and user or just system etc. and have it for doing quick smart backups and use for data volumes as well.
Many 3TB drives are slower than 7.2K desktop or enterprise and "green" which can be useful for backups.
3TB might be better for a new TimeMachine backup drive.
Yes DU will present full 3TB (you aren't doing a sector copy)
I aim to use 50% of a drive.
If you can, then invest into a small fast SSD like Samsung 840: $89 120GB is fine for most everyone, or 250GB. Then use some WD Black 2TB or larger for media.
you could leave the 1TB drive for system, remove all the media files taking up space, too and put those on the 3TB. I prefer to leave as is and have a safety net. At least for a month. Then turn the 1TB into a backup clone or something especially if you go ahead and get an SSD, which will run faster and perform better all around.
All depends on what you use your mac for.

Can I restore from TM to a replacement larger hard disk for my Macbook

My white 18mth old Macbook is running out of disk space fast (160Gb). I use time machine to back it up to a network drive.
If I get a larger (say 500Gb) disk for my MacBook will I be able to restore everything including the 10.5 op system back to the new disk?
Any advice appreciated. Thanks

Hi Roger,
see here for how-to http://discussions.apple.com/thread.jspa?threadID=1304707
Regards
Stefan

Large Hard Disk Reliability Question ( 500gb?)

At the MAC store, I have been told twice now by two different "Geniusus" that 750Gb or 1Tb Hard drives are less reliable... than their smaller counterparts.
My Questions:
1) Is this true?
2) Is there data in terms of mean time to failure? (versus 300 or 500Gb)
3) If not, is the reliability issue significant enough? i.e. do what?:
a) buy 500Gb x2
b) buy 750 or 1Tb and backup
c) Other ideas?
I am assuming the same applies to external drives.... true?
Assuming I do not get pursuaded otherwise, I plan to purchase a Hitachi 750Gb. Purpose HD video editing (nothing fancy, just family stuff).
Thanks in advance for any advise out there!!

Having had the Western Digital SE16 750GB for some time as a backup/archive drive I have to say it's done a good job of it. It's now tasked as my Time Machine drive as is seemingly doing well.
What you have to appreciate though is MTBF numbers don't really mean anything as any drive is going to be 100% reliable until it fails on YOU, and this is all anyone can really say over and above what any manufacturer says.
Personally, I recommend backup up in any case so you should always keep this in mind when considering your configuration. Even if you go with smaller drives you should be backing up as there is no such thing as a perfectly reliable drive.
When it comes to performance though the larger, 750GB and up, sized drives do tend to perform substantially better than their smaller counterparts.
So what exactly are your storage requirements and what exactly do you have now?

Large hard disk on 6119 motherboard

Hello All,
Can anyone tell me if my 120Gig Maxtor DiamondMax Plus9 120GB UDMA133 hard drive will work with a MS6119 motherboard (assuming latest bios)...?
Thanks very much,
Jamie

only as a slave,set none on that part of ide in bios and os will find it,but you will never boot to it
or get a card as in here
http://www.msi.com.tw/program/service/forum/index.php?threadid=11548&boardid=11

Large Hard disk

Similar Messages

Maybe you are looking for