Large Image Not Showing Up in CS3

I'm making a presentation for school that I'd always intended on playing off of a flash drive. One of my partners made an animation (image) of a neighborhood in AI and I imported it into Flash (it's. HUGE! 2200x 717). All this time I've been working on it and animating it and it works fine on my computer.
However, when it's online or played on other computers besides my own...the animation shows up as just a big, RED SQUARE. It animates like it's supposed to (moving around according to programming) and all the animations we put on top of it, created in Flash are there but the image itself...just a red rectangle.
Any clue why this might be? I didn't use loadMovie to bring it in or anything...it's an actual bitmap in my library. Other (smaller) artwork in the presentation created in AI and imported over show up fine as well.
It's kind of complicated but if you want to see it (and the problem) it's up at http://www.angyl.net/guns. You can navigate quickly to the problem past the other stuff once the gun appears in the bottom left and pressing it about 7 times.

A preloader for the whole movie? (it actually loads quite quickly), or just for the image itself?
I think you might be on to something there, though...perhaps I'm getting to it faster than the whole image can pop in...I'll give it a shot. Thanks!

Similar Messages

Web galleries--thumbs and large images not showing after uploading to server

I have created 2 web galleries--one html and one Flash. I saved them to my local drive and they work perfectly. Then I uploaded to our server (I checked to see that all folders/files made it, and they did) and then when I access the index.html file, neither the thumbnails or the full-size images show. In case it helps to see, here are the two URLs
FLASH
http://www.photosafaris.com/SlideshowLogs/PalouseSlideshowFlash/index.html
HTML
http://www.photosafaris.com/SlideshowLogs/PalouseSlideshowHTML/index.html
Anyone have suggestions/ideas?
Thanks,
RV

Sean--that did the trick for HTML galleries...thanks! I am working on a IIS server, so I presume your fix and the server are related to the problem I was exeperiencing.
In a Feb 4, 09 reply you posted to someone else, you referenced a link (see below) about making similar file mods to make Flash work, but I couldn't access the link. Any chance you could repost these mods so I can use Flash galleries on a IIS server as well.
Did you try my suggestions in the Flash thread?
http://www.adobeforums.com/webx/.59b76546/3
Much appreicated,
Rick

Large image not loading

I generate JPGs on my server and send them to clients on an intranet (using http://, not file://). Smaller images work just fine. Large images do not using Firefox, even when trying to view the images by themselves in a new tab. Those same images work perfectly fine in IE 8, Chome v22, and Safari 5.
I tried the suggestions here to no avail:
https://support.mozilla.org/en-US/kb/fix-problems-images-not-show?as=aaq
Similar problem found here:
https://support.mozilla.org/en-US/questions/795933?as=aaq
Not sure which attribute might trigger the issues, but I know:
- 901 x 27928 resolution 3.93 MB picture will load
- 904 x 32767 resolution 4.77 MB picture won't load
Looks like the image file is uncorrupted because I can click to view the image in FF, right-click to 'View image info', click 'Save As...' for the image, and save it to my desktop. Opens up just fine in Windows. Seems to be a bug in the way Firefox is attempting to display it...

That image displays fine for me in Firefox on Linux, but I'm not seeing anything in a Windows Firefox version that runs under Wine.
Even the Tools > Page Info > Media preview panel is blank there, but saving the image is possible.
<br />
<pre><nowiki>data:text/html,<img src='http://imageshack.us/a/img12/4543/visualizedp1776ddv27731.jpg'></nowiki></pre>

BLOB image not shows in JSP page!!

Hi Dear all,
I had tried to configure how to show BLOB image to jsp page . The code are works fine and servlet works ok but image can not show only. can you help me that what need to be added. Please help me.
Can any experts help me? BLOB image not shows in JSP page. I am using ADF11g/DB 10gR2.
My as Code follows:
_1. Servlet Config_
    <servlet>
        <servlet-name>images</servlet-name>
        <servlet-class>his.model.ClsImage</servlet-class>
    </servlet>
    <servlet-mapping>
        <servlet-name>images</servlet-name>
        <url-pattern>/render_images</url-pattern>
    </servlet-mapping>
3. class code
package his.model;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Iterator;
import java.util.Map;
import javax.servlet.ServletConfig;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
public class ClsImage extends HttpServlet
//private static final Log LOG = LogFactory.getLog(ImageServlet.class);
private static final Log LOG = LogFactory.getLog(ClsImage.class);
public void init(ServletConfig config)
    throws ServletException
    super.init(config);
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
    throws ServletException, IOException
    System.out.println("GET---From servlet============= !!!");
    String appModuleName = "his.model.ModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleName");
    String appModuleConfig = "TempModuleAssetMgt";//this.getServletConfig().getInitParameter("ApplicationModuleConfig");
    String voQuery ="select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = 'P1000000000006'" ;// 'P1000000000006' this.getServletConfig().getInitParameter("ImageViewObjectQuery");
    String mimeType = "jpg";//this.getServletConfig().getInitParameter("gif");
    //?IMAGE_NO='P1000000000006'
    //TODO: throw exception if mandatory parameter not set
    ApplicationModule am =
      Configuration.createRootApplicationModule(appModuleName, appModuleConfig);
      ViewObject vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
    Map paramMap = request.getParameterMap();
    Iterator paramValues = paramMap.values().iterator();
    int i=0;
    while (paramValues.hasNext())
      // Only one value for a parameter is expected.
      // TODO: If more then 1 parameter is supplied make sure the value is bound to the right bind
      // variable in the query! Maybe use named variables instead.
      String[] paramValue = (String[])paramValues.next();
      vo.setWhereClauseParam(i, paramValue[0]);
      i++;
   System.out.println("before run============= !!!");
    // Run the query
    vo.executeQuery();
    // Get the result (only the first row is taken into account
    System.out.println("after run============= !!!");
    Row product = vo.first();
    //System.out.println("============"+(BlobDomain)product.getAttribute(0));
    BlobDomain image = null;
    // Check if a row has been found
    if (product != null)
      System.out.println("onside product============= !!!");
       // We assume the Blob to be the first a field
       image = (BlobDomain) product.getAttribute(0);
       //System.out.println("onside run product============= !!!"+image.toString() +"======="+image );
       // Check if there are more fields returned. If so, the second one
       // is considered to hold the mime type
       if ( product.getAttributeCount()> 1 )
          mimeType = (String)product.getAttribute(1);
    else
      //LOG.warn("No row found to get image from !!!");
      LOG.warn("No row found to get image from !!!");
      return;
    System.out.println("Set Image============= !!!");
    // Set the content-type. Only images are taken into account
    response.setContentType("image/"+ mimeType+ "; charset=windows-1252");
    OutputStream os = response.getOutputStream();
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[4096];
    int nread;
    while ((nread = is.read(buffer)) != -1)
      os.write(buffer, 0, nread);
      //System.out.println("Set Image============= loop!!!"+(is.read(buffer)));
    os.close();
    // Remove the temporary viewobject
    vo.remove();
    // Release the appModule
    Configuration.releaseRootApplicationModule(am, false);
} 3 . Jsp Tag
<af:image source="/render_images" shortDesc="Item"/> Thanks.
zakir
====
Edited by: Zakir Hossain on Apr 23, 2009 11:19 AM

Hi here is solution,
later I will put a project for this solution, right now I am really busy with ADF implementation.
core changes is to solve my problem:
    byte[] buffer = new byte[image.getBufferSize()];
    int nread;
    vo.remove();
    while ((nread = is.read(buffer)) != -1) {
      os.write(buffer);
    }All code as below:
Servlet Code*
public void doGet(HttpServletRequest request,
                    HttpServletResponse response) throws ServletException,
                                                         IOException {
    String appModuleName =
      "his.model.ModuleAssetMgt";
    String appModuleConfig =
      "TempModuleAssetMgt";
String imgno = request.getParameter("imgno");
    if (imgno == null || imgno.equals(""))
      return;
    String voQuery =
      "select ITEM_IMAGE from MM_ITEMIMAGE where IMAGE_NO = '" + imgno + "'";
    String mimeType = "gif";
    ApplicationModule am =
      Configuration.createRootApplicationModule(appModuleName,
                                                appModuleConfig);
    am.clearVOCaches("TempView2", true);
    ViewObject vo = null;
    String s;
      vo = am.createViewObjectFromQueryStmt("TempView2", voQuery);
    // Run the query
    vo.executeQuery();
    // Get the result (only the first row is taken into account
    Row product = vo.first();
    BlobDomain image = null;
    // Check if a row has been found
    if (product != null) {
      // We assume the Blob to be the first a field
      image = (BlobDomain)product.getAttribute(0);
      // Check if there are more fields returned. If so, the second one
      // is considered to hold the mime type
      if (product.getAttributeCount() > 1) {
        mimeType = (String)product.getAttribute(1);
    } else {
      LOG.warn("No row found to get image from !!!");
      return;
    // Set the content-type. Only images are taken into account
    response.setContentType("image/" + mimeType);
    OutputStream os = response.getOutputStream();
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[image.getBufferSize()];
    int nread;
    vo.remove();
    while ((nread = is.read(buffer)) != -1) {
      os.write(buffer);
    is.close();
    os.close();
    // Release the appModule
Configuration.releaseRootApplicationModule(am, true);
}Jsp Tag
<h:graphicImage url="/render_images?imgno=#{bindings.ImageNo.inputValue}"
                                                    height="168" width="224"/>

Another Images not Showing up thread

I know there are multiple threads out there about images not showing up on the login page of application express, and I have browsed most of them without success.
My images folder is in:
C:\oracle\product\10.1.0\db_1\Apache\Apache\images\
My dads.conf file has specified:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
Address of missing image in I.E. is:
http://<host>:7777/i/htmldb/apex_logo.gif
When I ran @apexins I specified /i/ for the virtual images directory.
I am running Oracle Database 10gR2, with Oracle HTTP Server that came with the Oracle Database 10g Companion CD Release 2.
I am using APEX 3.2.
When I try to go to
http://<host>:7777/i/
I get:
You don't have permission to access /i/ on this server.
I also cannot login to APEX. When I type my username/password and click the Login button, it does nothing (nothing loads, nothing changes... nothing happens). I don't know if this is related?
Thank you,
~Tom

I found the problem -
In my dads.conf file I had:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images\"
When I really needed:
Alias /i/ "C:\oracle\product\10.1.0\db_1\Apache\Apache\images/"
Note the end slash after images changed from backslash to forward.
Silly me.

Images not showing in the jlabel/jbutton

Hello all,
I've a package in which my cards directory is located along with all my src files and compiled classes. All my images ****.gif files are inside this directory.
Then I've following the icon object.
protected static JLabel lblDeck;The following code is used to get the image.
String imgPath;
     imgPath = isImageExists("imgBG1.gif");
          if (imgPath == "")
          {     // If the image of Card Deck(imgDeck) is not Found
               lblDeck = new JLabel();
               lblDeck.setBackground(new Color(0, 64, 128));
               lblDeck.setOpaque(true);
               flagImgDeckFound = false;
          } else {
               // If the image of Card Deck is Found
               imgDeck     = new ImageIcon(imgPath);
               lblDeck = new JLabel(imgDeck);
// Check if the image exists else return "";
protected String isImageExists(String imgName) {
          java.net.URL imgURL = getClass().getResource("cards/" + imgName);
         if (imgURL != null)
         {     return (imgURL.toString());     }
         else
              JOptionPane.showMessageDialog(null, "File not Found: " + imgURL);
              return "";
     }I'm still unable to get the image in the jlabel!
When i checked the path, it is exactly returning the path of the file.
But its neither loading the image into the jlabel nor is it returning "".
This is just the label part i've other jbuttons also. Even they are not displaying any images.

aLkeshP wrote:
can everyone see this thread?
YES FER-CHRISE-SAKE.
Just how many times do you intend posting the same identical question?
images not showing in the jlabel/jbutton
Problem in imageicon
iconImage on JButton & JLabel
Re: images not showing in the jlabel/jbutton

Likely bug with external editing (in CS5 not CS6 beta) and edited image not showing back up in LR

I have come across something strange today that I've not seen before. I'm running LR 4.0 under Win7 64-bit. I usually use Photoshop CS6 beta as my external editor, but invoke CS5 when I have to use some tools that don't support the beta. Here is the scenario:
* I have CS5 open
* I externally edit an image in CS5 and Save it from CS5 when I'm done
* The edited image does not show up in LR
* I close LR and reopen it
* There is the edited image!
I have duplicated this many times this evening. I don't think I've seen it when I've used CS6 beta.

Something strange is going on because I had the behavior reported of edited image not showing up after using another filter, Nik Silver Efex Pro 2.

Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Experts,
I am using Crystal report for Eclipse and also using Struts2 and tiles framework combination.
The problem is when viewing the report all I've got is red X on all images and the graph image also not showing. This is when I use tiles and my jsp is inside the web-inf folder.
This is my struts link: href="s:url value='/report/reportOpen.action?report=1'
I've checked that the path to the viewer generated HTML is not correct. see code below.
src="../../../crystalreportviewers/js/crviewerinclude.js"
But when I test to access a simple jsp viewer that resides on the web root folder, this works fine but of course this is not what I want to have. I need to have my banner and menus on top of the report page (using tiles)
This is my jsp link: href="s:url value='/ReportViewer.jsp?report=1'
Viewer generated HTML below.
src="crystalreportviewers/js/crviewerinclude.js"
This might be a common problem and that you can share to me your solution.
Note: I removed the script tags because I can't submit this entry.
Thank you in advance,
Regards,
Rulix Batistil
Crystal Report Images Not Showing - JSP inside /WEB-INF folder

Hi Saravana,
After a few experimentation from your idea i was able to figure out the problem and now it is working.
I don't have to copy the folder to where my jsp resides but still maintains it in the root location: web/crystalreportviewers
The changes should always be in web.xml.
1st: change the crystal_image_uri value to ../crystalreportviewers
2nd: change crystal_image_use_relative value to "web"
Change to "web" instead of webapp because that is what I named my web root folder.
<context-param>
          <param-name>crystal_image_uri</param-name>
          <param-value>../crystalreportviewers</param-value>
     </context-param>
     <context-param>
          <param-name>crystal_image_use_relative</param-name>
          <param-value>web</param-value>
     </context-param>
Thank you. You showed me the way on how to solve the 3 day problem.
BTW, my next problem is when clicking on any buttons prev/next/print/export, I got this error HTTP Status 404.
Well, at least for now I can view my initial report. I just need to figure out the next issue and with the help of the great people here in the forum.
Thanks a lot.
Regards,
Rulix
Edited by: Rulix Batistil on Nov 26, 2008 7:27 AM

Descriptions on Large Gallery Images not showing

Hi
http://earthangroup.blackroom.com.au/Default.aspx?PageID=5806533&Page=1&A=PhotoGallery&PID =18366&Items=12
When clicking the images the descriptions do not show for the images. It appears to be a different lightbox to the one in the instructions.
Any assistance appreciated.
Regards
Paul

Hey Chad, I was 99% sure this would work for me too! At least I hoped it would, but, alas, it did not fix my photo gallery problem, and messed up my galleries. I can go back to the fancybox without captions, but I would really like to have them if possible.
If you can, take a look. Did I just mess up the implementation?
http://www.pujolskitchen.com/photo-gallery/deidre-visits-food-network
script is at:
http://www.pujolskitchen.com/javascript/scripts.js
at about line 453 i replaced with your code...
now the images take over the whole page and you can't navigate.
I'll have to revert back soon (can't leave it this way too long)
Let me know if you see something.
jeannie

Large images not displaying properly in Acrobat Pro 9

When creating PDF documents from any software (Illustrator, Corel, InDesign, etc), color objects over 50% of the page size have white fill. If object has an outline, the outline will appear normally, but the fill will be white. I've searched forums everywhere and have found no answer. Most forum topics on this are issue focus on settings in the program that exported the PDF. I am 99% sure this is not an export problem, but is something in Acrobat itself (a missed setting? Corrupt program file?)
To provide the best information, I've done a little scientific research. Here is what I know:
Currently running Acrobat Pro 9.5.5
This is only happening on ONE install of Acrobat 9. Documents display correctly in Reader X and in Acrobat 9 on other machines.
Started happening a few weeks ago, I have no idea what changed.
"Show Large Images" in preferences dialog is checked. Unchecking it and rechecking it does nothing.
Have installed all available updates to the software
I experimented with different object sizes. At 50% of page size, objects appeared normal, at 51% filled object disappears.
Does not affect photos, only affects vector objects.
I welcome all ideas to fix this.
ALSO - Am running this on Windows Vista 64 Bit

Hello? Is there nobody in the Adobe universe that has an actual solution to my problem?
Other things I've tried to solve this:
repair the install.
uninstall and reinstall
cuss at the computer
throw a tantrum.
I will pay someone a whole dollar for a solution that works.

Why are background images not showing in pdf?

You see the strawberries for a second when the pdf first opens then they disappear. We use pc's here at work. XP. Most files do come from mac users.I review packaging files before they print. I did install reader xi. My boss is using a pc laptop but not having this issue.

Have you checked Edit>Preferences>Page display>Page content and information to be sure that "Show large images" is checked?

Deleted files in "File Panel". Images not showing up

Hello all.
I deleted some old pages and I renamed some pages, all in the
"file panel". Now my images are not showing up in preview. Example,
my background and borders are not showing up, and they are still in
my root folder. What did i do wrong? (fyi: When I was in DW last
night all my images showed up with no problems)
CS3, Mac
Thanks

quote:
Originally posted by:
Newsgroup User
Thanks you've even helped me with that one. I was going threw
the same thing with images. That solved that issue thanks
the images do still show in dreamweaver design view?
but not in f12 preview in browser?
are the paths to them site root relative? do they start with
a leading
/slash?
if yes- go into dw preferences->preview in browser and put
a checkmark in
"use temp files for preview"
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Text Wrap options not showing in InDesign CS3

Using InDesign CS3 on a Mac 10.4. I've had this problem for a couple of months now and it's getting past the point of annoying. When I open my text wrap options pallete it's blank even when I expand options. I can see the text wrap icons in my header panel, but I no longer have options to change the right/left/top/bottom margins. Just a general "add wrap" and "remove wrap". Is there any way I can get my pallete back? I've tried defaulting my tools, but still it does not show up. I don't know what to do to get it back.

Did you try resetting preferences? While pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files. If you don't get the message about deleting preferences, you weren't fast enough.
http://livedocs.adobe.com/en_US/InDesign/5.0/help.html?content=WSa285fff53dea4f86173837510 01ea8cb3f-6d1e.html
Ken

Spry Bug? Background Colors/Images not showing in IE6/XpP

I'm trying to wrap up my site for MiniMAX SE7EN (Cheap plug,
it's on 6/26 in DC) and I've got a Spry Accordion Component I used
in Dreamweaver CS3 to display all the speakers and then I switched
the CSS file to allow for different colors and a background image
to show through. Seems fine in Firefox and IE7 but in IE6 for PC's,
it appears black and only black. Is this a Spry bug or something I
screwed up with regarding the CSS?
http://www.minimaxconference.com/

I am having the same problems in IE7. I'm using the latest
version of everything (Spry 1.6.1 and javascript file version 0.12)
and at first I was having the problem on my drop down menus
appearing horizontal with all the correct styles but when I changed
the rule ul.MenuBarHorizontal ul to position: relative; the drop
downs appear vertical now but I have no beige border around the
whole ul anymore and I'm getting white space inbetween list items.
http://www.wusf.usf.edu/Header_Nav_Footer_newStyleSheet.cfm
so if anyone has any advice I'd much appreciate it. Also i'm
using 1px width on my borders no decimals.

Image not showing in Abobe integrated with Java WebDynPro

Hi All,
Image is not showing in Abobe integrated with Java WebDynPro.
I did the following:
Added the image field in adobe form. in URL value set the value of context node binding. Binding set to none and size set to Use Original Size.
Then in script editor i wrote
this.value.image.href = xfa.resolveNode(this.value.image.href).value;
at innitialize , javascript and client.
I can see the image from the same url context value if image field is created directly in WebDynPro View.
Can anyone suggest what is missing?
Thanks and Regards,
Nuzhat

Try changing your line of code for this one
this.value.image.href = xfa.record.Images.URL;
Check that the url passed by scripting is correct with a messageBox for example.
You can also try assigning a hardcoded url at scripting level to check if its works.
Best regards, Aldo.

Large Image Not Showing Up in CS3

Similar Messages

Maybe you are looking for