Large JPG files from LR5.3 not to open in PSCC

Hello,
I'm not sure if I'm right here.
Wind 8.1.64bit
Most of the time I export photos from lightroom archive if I want to use a pic. Now I found that I can't load/edit this files in PS. Open yes, pic is to see, but there will be alwway a ring and I can't do anything. The only I can do is killing PS by TaskManager.
Open smaller pics ist just fine. So I found: convert the LR-Jpeg by another programm to 96ppi. Open it in PS an make it to 300ppi, edit the one and only layer, save it as usual Jpeg. Now it es a big edited Jpeg picture. (But doesn't make sence to change the sizes therefore) But if I try to edit this again, I will get the same hanging PS after it was opened.
Maybe it is an issue for large files in PS? And has nothing wih my LR-exported files to do?
Regards
Detlef

What are the pixel dimensions of the too-big-for-PS images from LR? PS does have a limit although I think it is 30,000 pixels on a side.
Can you upload one of these JPGs to www.dropbox.com <http://www.dropbox.com> and post a public download link, here, so others can test to see if the image also doesn’t work in their PS? This would help determine if something specific to your computer, perhaps a plug-in, or the video drivers, doesn’t like the image or if it is something universal in PS. It could be something where PS is asking for more memory and the OS is taking a long time to give it some.

Similar Messages

Firefox downloads a large jpg file again, even if its open in a seperate tab already.

When I click on a link to open a large jpg file in a new tab, it works fine. When I Right Click to save the image, firefox starts the complete download again, which takes time. It ideally should not download again. The picture has already been downloaded & is visible on a tab. Try using this link:
http://pliki.optyczne.pl/sony_70-400/DSC00029.JPG
The pic will open in a window. When you right click to save the file, firefox will download the whole file again. Why?

Create a new profile as a test to check if your current profile is causing the problems
See [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also http://kb.mozillazine.org/Browser_will_not_start_up
You can discuss issues with Namoroka 3.6 and Minefield 4.0 nightly and alpha/beta builds at the MozillaZine Firefox Builds forum.
That forum is better suited to discuss such issues.
You need to register on the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=23

Downloading Large PPT file from Email - not working

I emailed to myself a large 12 MB PPT file and in my email touched this assuming it would open and allow me to use iWork to open the file. I do have iWork Keynote on my iPad. However, it does not open. I touch the file and the hourglass keeps thinking and says it's downloaded 0 of 12.5 MB. It sits like that for ages.
I've had no problem with other Excel and PDF files, only larger PowerPoint files. I was able to open a smaller PPT no problem.
Any thoughts?
Richard

If you're trying to import that file into Keynote on your iPad, you won't get it there by emailing it to yourself, regardless of size. You have to do the following.
1) Connect your iPad to your laptop.
2) Once iTunes is open, click on your iPad under Device in the left column.
3) Click on the Apps tab on top.
4) Scroll down to the File Sharing section.
5) Click on Keynote.
6) Click on the Add button.
7) Browse to the location of the PPT file on your laptop, select it.
8) Now you have your file ready to import in iTunes.
9) Click on the Info tab on top.
10) Click on Sync below. Once it finishes, you'll have your PPT file in Keynote on your laptop.
11) On your iPad, click on Keynote.
12) Click on the little folder icon at top right corner.
13) Click on the PPT file in the list that opens. There you go.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

how do I get all these files in my catalogue in the correct places cos they scattered around a bit
That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

How do you make individual jpgs from a clipping mask of a larger jpg file?

I have a large mosaic picture that makes up an image. I have set dimensions and a template of smaller bounding boxes that will be individual canvas's when I print them and when put together will make this larger image. I am unable to export or save individual jpg files from this clipping mask of a larger file. Any Suggestions?
Thanks,
Garrett

Don't use clipping masks, use artboards and enable the "use artboards" option on export.
Mylenium

Can't open .jpg files in Key Note

Why are my .jpg files grayed out in Key Note? I've created slides before with .jpg files and don't know why I'm not able to do that now.

describe the process you used to create the slides.
There are four reliable ways to put a jpg on a slide:
Do Insert/Choose... pick your jpg and it appears on the slide. BEST
Copy and paste a jpg from another slide
Drag a jpg file from the finder into the slide editor sidebar which simultaneously creates a new slide with the jpg on it
Include it in a smart build
A less reliable way to bring in a jpg is to copy and paste it from another program, like Word. I have found those images to fail quite often.
Which method did you use? Did they look normal the first time they went in?

How do I copy a large MOV file from iMac to iPad?

How do I copy a large MOV file from iMac to iPad? Thank you in advance for the help. I am connected via a USB but finder is not showing my iPad.

Open iTunes, drag the MOV file to your library in iTunes, then sync to the iPad.

Copy jpg files from mac o sx 10.5.4 to pc windows xp

I copied jpg files from my mac book to a windows pc, however, when I go to the widows machine I can see them on the hard drive of the pc but the pc will not open them.
During the copy an added extension, a "dot" and then an underscore before each files name. Example. On my mac I have a jpg file named 2f.jpg and when I copied it over it appears on the windows pc as ._2f.jpg. Windows can not read it

MDD Dual 1GHz PowerMac
Titanium Powerbook
HP T7500 Dual Core 2.2GHz laptop
windows formatted (NTFS) 250GB SimpleTech External HD
Hi Friends,
I'm forced to use a PC at work that I have the windows formatted ext hard drive connected to for backup purposes.
I connected the external drive via USB2 to my TiPB and downloaded some RAW image files.
Those image files are not recognized by my Bridge on my Mac.
Those image files are no longer recognized by my PC thru Bridge, Photoshop or Lightroom. I also see an extra file type with the name "filename.dng.mac"
Therefore, if my original file name is "_JTR0398.dng", then, after mounting the external HD on my laptop or PowerMac, I also get another file next to it named "_JTR0398.dng.mac".
Thanks for your help!
Joe

How can I send a large video file from my iPhone 4?

How can I send (by text) a (fairly) large video file from my iPhone 4 without it getting compressed first?
If that's not possible is there a way to uncompress the video file one it is received onto the receiving iPhone?
Or is there a way to sync or transfer a video file from iPhone to iPhone?

ExFAT would be the best file system format, as it will handle files greater than 4GB.
If exFAT is not available, go for FAT32.
Just FAT is too limiting, so avoid that

How to insert a JPG file from file system to Oracle 10g?

I have developed a schema to store photos as BLOB which store the text description as CLOB original filename, file size.
I also use ctxsys.context to index TEXT_DESCRIPTION in order to perform Oracle Text Search and it works.
I would like to insert some JPG file from say C:\MYPHOTO\Photo1.jpg as a new record. How can I do this in SQL PLus and/or Loader?
How can I retrieve the PHOTO_IMAGE back to the file system using SQL Plus and/or command line in DOS?
See the following script:
create user myphoto identified by myphoto;
grant connect, resource, ctxapp to myphoto;
connect myphoto/myphoto@orcl;
PROMPT Creating Table PHOTOS
CREATE TABLE PHOTOS
(PHOTO_ID VARCHAR2(15) NOT NULL,
PHOTO_IMAGE BLOB,
TEXT_DESCRIPTION CLOB,
FILENAME VARCHAR2(50),
FILE_SIZE NUMBER NOT NULL,
CONSTRAINT PK_PHOTOS PRIMARY KEY (PHOTO_ID)
create index idx_photos_text_desc on
PHOTOS(TEXT_DESCRIPTION) indextype is ctxsys.context;
INSERT INTO PHOTOS VALUES
('P00000000000001', empty_blob(), empty_clob(),
'SCGP1.JPG',100);
INSERT INTO PHOTOS VALUES
('P00000000000002', empty_blob(), 'Cold Play with me at the concert in Melbourne 2005',
'COLDPLAY1.JPG',200);
INSERT INTO PHOTOS VALUES
('P00000000000003', empty_blob(), 'My parents in Melbourne 2001',
'COLDPLAY1.JPG',200);
EXEC CTX_DDL.SYNC_INDEX('idx_photos_text_desc');
SELECT PHOTO_ID ,TEXT_DESCRIPTION
FROM PHOTOS;
SELECT score(1),PHOTO_ID ,TEXT_DESCRIPTION
FROM PHOTOS
WHERE CONTAINS(TEXT_DESCRIPTION,'parents',1)> 0
ORDER BY score(1) DESC;
SELECT score(1),PHOTO_ID ,TEXT_DESCRIPTION
FROM PHOTOS
WHERE CONTAINS(TEXT_DESCRIPTION,'cold play',1)> 0
ORDER BY score(1) DESC;
SELECT score(1),score(2), PHOTO_ID ,TEXT_DESCRIPTION
FROM photos
WHERE CONTAINS(TEXT_DESCRIPTION,'Melbourne',1)> 0
AND CONTAINS(TEXT_DESCRIPTION,'2005',2)> 0
ORDER BY score(1) DESC;

Hi
You can use the following to insert an image:
create table imagetab(id number primary key,imagfile blob, fcol varchar2(10));
create or replace directory imagefiles as 'c:\'
declare
    v_bfile BFILE;
    v_blob BLOB;
begin
    insert into imagetab (id,imagfile,fcol)
    values (3,empty_blob(),'BINARY')
    return imagfile into v_blob;
    v_bfile := BFILENAME ('IMAGEFILES', 'MyImage.JPG');
    Dbms_Lob.fileopen (v_bfile, Dbms_Lob.File_Readonly);
    Dbms_Lob.Loadfromfile (v_blob, v_bfile, Dbms_Lob.Getlength(v_bfile));
    Dbms_Lob.Fileclose(v_bfile);
    commit;
end;
/

The file "?" could not be opened because it is empty.

I put about 30 photos on my thumb drive so I could take them with me. I saw them on the drive at one point, now on some of them I am getting the error; "The file "?" could not be opened because it is empty." The file still is large in size, and there is data there, but "Preview" will not open it. These are important photos for work, and I want to know if there is any other way to retrieve them. Also, does anyone out there know why it did this. Only some of the photos can no longer be opened, and I did NOT edit any of them. I simply drug them over to a portable drive.
Thank you,
Darren

Does this involve iPhoto in some way?

Importing jpg files from hard drive

I am trying to import all my pictures into iphoto however am getting an error:
Unreadable file, The following file cannot be imported. (import failed).
The files I am importing are *.jpg files from various camera I have owned over 5 years. I have all the photos uploaded into my apple TV as well as being very easily readable through other picture viewers on my Mac. I cant seem to understand why it would not import into iphoto.
Please can somebody help me if you have ever had this issue before.

Welcome to the Apple Discussions. Try copying a few to the desktop and from there into iPhoto. If that is successful then there's something about being on the Apple TV drive that iPhoto doesn't like. If that's the case you may have to copy the photos to the desktop, import into iPhoto and then delete them from the desktop.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

I want to save large pdf files from my computer to my iPad so I can view them in Adobe Reader.

I want to save large pdf files from my computer to my iPad so I can view them in Adobe Reader. I do not want to view them in iBooks or Quickoffice. Since I cannot email these large files, how can I get them on my iPad? Thanks for your help.

I think that Adobe reader supports file sharing.
Connect the iPad to your computer and launch iTunes. Select the iPad on the left side under "devices". Click on the Apps Tab in the window on the right. Scroll down to the File Sharing Apps list under the main apps list. Click on Adobe Reader. Drag the documents into the file sharing window on the right or select them using the "add" button.
Launch the Adobe reader app and the files should be in there.

Advice on .jpg files that will not import

I have .jpg files that are not importing into LR even though they open fine on my Mac. Is there anyway I can find out why LR will not import them? Any advice for dealing with images like this?
Thanks.

Usually it's due to Lr perceiving some file wonkiness that your Mac is less picky about (Lr prefers to keep details of such to itself...). ExifTool could probably fix it, without re-creating image data, if you knew how, but it might be simplest to just re-save the file using any software that will work, maybe save in tiff format, to prevent quality loss due to re-jpeg'ing a jpeg, and maybe metadata will be re-written in a format more palatable for Lightroom.
R

EXPORTING FILES FROM LR5

Using Win7 64-bit O/S. My ususal procedure from LR4 after editing is to export to Elements 9 catalog using the Cntl-Shift-E commmand. I rename the file as it suits me then export to my hard drive location by pressing "Export". I then go to PSE and get the message "New files have been found. Do you want to import?" Clicking yes adds the file to my Library. After installing LR5, I can't import edited files from LR5 OR Photohop (CS5). Similar experiences? Work arounds?

I can't import edited files from LR5 OR Photohop (CS5).
Why not? What happens when you try? Is there an error message?
In my opinion there there is a work around as designed by Adobe:
Use LR5 as your "Organizer" (not PSE), and use PSE as an auxiliary editor. The process is much smoother than what you describe, and your problem goes away. Adobe designed Lightroom to work smoothly with the PSE Editor; but there is no design to allow Lightroom to work smoothly with the PSE Organizer.

Large JPG files from LR5.3 not to open in PSCC

Similar Messages

Maybe you are looking for