Large Premiere CS5 Project not fully loading

I have a project in Premiere that is relatively large (lots of footage, effects, music, etc.) that will not fully load. The actual 'loading' window does appear, with the loading taking a minute or so. However, when the project finally opens, all clips say "Media Pending", and take forever to create thumbnails. The project has not made it through this opening process without appearing to completely create all thumbnails to only crash. Sometimes the 'Saving' window will appear, but the progress bar will remain empty. The window is then inactive, and if I try to cancel the saving, the entire program crashes. I'm not too happy about this. Any suggestions?

Thanks. We're getting closer. Next...
when I would click on the project to use it
What specifically does that mean? Where exactly are you clicking?

Similar Messages

HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 books

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

Premiere CS5 - Project Monitor playback is jerky after resintall of operating system and CS5

PROBLEM: Premiere CS5 - Project Monitor playback is jerky
This had NOT been an issue prior to reinstalling the operating system and all software. I have read numerous articles on the forums and have tried everything I can find...with no results.
STEPS TAKEN TO RESOLVE THE PROBLEM:
I have scoured the articles here http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=choppy%20video&cat=support&pr oduct=premierepro and others at Cretive Cow
I have installed all updates for CS5 Master Collection, immediately following a fresh install of the operating system and SC5 Master Collection.
I have ensured that sequence settings match resolution and frame rates of footage - the problem persists.
I have tested by importing both standard def AVI files created from tape and high def SONY MP4 files - the problem persists.
I have ensured the latest Video drivers are installed (clean installation selected, so that the Windows default would be removed) - the problem persists.
I have tried the 3D settings in NVIDIA control panel | Program Settings tab... selected Adobe Premiere Pro from the drop down menu | and chaged 'Multi-display/mixed-GPU acceleration from the value of 'Multiple Display performance' to the value of 'single display performance'; although, I ran two monitors before using this latest NVIDIA video driver and I didn't experience this jerky footage issue - the problem persisted after affecting that change; so, I switched it back.
Since I have 96 GB of RAM, I don't use a pagefile. A zero MB page file is the same setting I had prior to rebuilding the C: Regardless of whether I have a pagefile or not, the problem persists.
I have tried creating a fresh user profile, where the user profile is created on the C: drive by default; and, where I left it there on C: to test for the jerky playback in a new PrPR project - the problem persists.
Regarding the C: (system drive) and why I reinstalled everything, it had become unstable and was locking up. I ran DISK ERROR CHECKING with the FIX parameter and the system was still locking up on me. Keep in mind that the System drive is a solid state drive. Anyhow, I had no choice but to dive in and reinstall everything. I wiped the system partition of the SSD using quick format and started installing the operating system. Now, I've read the CLAIM that this cuases performance issues; but, the only place I see issues is in the video monitor playback in PrPr. Everything else - Office applications...printing...browsing the Internet...works just fine, everything is responsive, whereas, I couldn't do ANYTHING with it before.
SYSTEM CONFIGURATION:
The Operating system and all software is installed on C:
All data files and most profile related folders are stored on D:
C:\ (one Intel Solid State Drive - SYSTEM DRIVE) Used Space: 57.5 GB Free Space: 388 GB
D:\ (four Western Digital 2TB drives in an on-board INTEL hardware RAID5 array & hotswapable backplane) used space: 1.28 TB Free space: 4.16TB
Adobe Premiere Pro CS5 VERSION: 5.0.3 (005 (MC: 218798))
Operating System    Microsoft Windows 7 Ultimate Version    6.1.7601 Service Pack 1 Build 7601
System Manufacturer    Intel Corporation
System Model    S5520SC
System Type    x64-based PC
Video    NVIDIA Quadro FX 4800 driver v.320.78
Display        Dell 27" LCD (DisplayPort)
Display        Dell 27" LCD (DisplayPort)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Processor    Intel(R) Xeon(R) CPU           X5680 @ 3.33GHz, 3326 Mhz, 6 Core(s), 12 Logical Processor(s)
Installed Physical Memory (RAM)    96.0 GB
Page File Space    0 bytes
PREMIERE PRO CS5 SETTINGS:
Monitor PLAYBACK RESOLUTION: Full
Monitor PAUSE RESOLUTION: Full
(regardless of this setting, the problem persists)
PREFERENCES:
MEMORY:
Installed RAM: 95.9 GB
RAM reserved for other applications: 10 GB
Optimize rendering for: Performance
(Changing this setting to 'memory' does not resolve the problem)
MEDIA:
Media Cache Files
X - Save Media Cached files next to originals when possible
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
(User Profile folders were relocated to D:\ from within the properties of each folder's 'LOCATION' tab. This is the same configureation I had prior to rebuilding the C:\drive. Testing under a new profile where it's allowed to stay on teh system drive does NOT resolve the problem.)
Media Cache Database
LOCATION: D:\Users...\AppData\Roaming\Adobe\Common
PROJECT SETTINGS:
Scratch Disks
Path: D:\Users...\My Documents\
General
Video Rendering and Playback: Mercury Playback Engine GPU Acceleration
(Setting Viideo Rendering and Playback to 'Sofware' does not resolve the problem)
If any of y'all have any other suggestions, I'm all ears.
Thank you.

I'VE RESOLVED THE PROBLEM!
PREFACE:
OK, I am hoping that through this week-long Operating-System-and-Software-reinatalltion excerise of mine, I have revealed something that everyone -- whom have been cursing Adobe over -- can apply to their systems to resolve this jerky video problem within PremierePro CS5 (and quite possibly other versions, too).
If you've read my post above, you've seen all the steps I've taken to resolve the problem. I've read many posts, some of which have mentioned hardware upgrade / opitmization steps that one may take to enhance performance, and hopefully resolve the problem. I've read where people have taken these steps and have still experienced the problem...and then they curse Adobe. Fer-shame, fer-shame, fer-shame! (nod to Gomer Pyle).
In my case, I knew it wasn't an Adobe issue, as it had worked flawlessly before; and, it wouldn't require a hardware upgrade or reconfigureation, as my system is completely maxed out with two processors, a system drive and a hardware RAID5 array, a CUDA-suported nVIDIA 4800 FX card, and 96 GB of RAM. bla bla bla, puke...whatever. Bottom line is this:
It's not a software issue. It's not and Adobe issue; and Gawd no! It's NOT a PC vs. Mac issue! HA HA. The software had worked swimmingly well prior to the reinstallation / 'lobotomy' I perfomed on the system drive.
SOLUTION FOR ME:
Download and install the updated drivers for the motherboard. Mine is an Intel Workstation Board S5520SC. Intel has an INTEL DRIVER UPDATE UTILITY which automatically scaned my Intel system and identified drivers which needed updating. A very handy, time-saving tool!!! Here's the URL: http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
The scan revealed two Intel drivers needing an update:
Intel Chipset
Wired Networking
and one non-intel driver:
Creative Labs Sound Blaster X-fi
I downloaded and installed these three drivers, rebooted, and tested PremierePro, and was extatic to find this resolved the problem.
If you have a motherboard from another manufacturer, then you may want to navigate over to their wibsite to locate chipset and other updated drivers for your motherboard.
ROOT CAUSE:
While Microsoft Windows 7 Ultimate was able to install certain default drivers during the Operating System installation (keeping in mind that this was done on an Intel Solid State Drive that I formatted using Quick Format) these default chipset drivers apparently weren't current and were ultimately the root cuase of the jerky video playback within PremierePro CS5.
Peace

My iMovie keeps crashing and will not fully load. What do you think is the problem?

What would be the reason why my iMovie keeps crashing and will not fully load?

I don't know what version of iMovie you are using, nor the Mac OS X version (that's always helpful when posting questions).
However, usually when iMovie has the type of problem you mention, it's advisable to firstly trash the preference file. Here's how to go about it for iMovie '11 on Mountain Lion (similar methods apply for other versions):
Go to your Home folder <your user name>/Library/Preferences (NOT the Library folder at the top level in Macintosh HD). Similar to Lion, on Mountain Lion (10.8.3), the Home Library folder will be hidden (unlike pre-Lion OS X versions). To access it, click and hold down Go in the Finder menu bar, then press and hold down the Option key on the keyboard - the Library folder will appear in the drop down list. Slide the pointer down to Library and, as you release the pointer, the folder will open in Finder. Now you can navigate to the Preferences folder.
In your user Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings (this happens in the background as iMovie is loading).
If iMovie now opens and appears to be working properly, you can change the default settings in the menu item "IMovie > Preferences", as desired. Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm any existing Events or Projects.
Note that these instructions are for iMovie '11 (currently version 9.0.9). For users on earlier versions, the preference file has a different but similar name. For example, for iMovie '09 (that's version 8.0.6) the file is named "com.apple.iMovie8.plist". Earlier versions may or may not have a number in the name, for example, "com.apple.iMovie.plist"
If this doesn't fix the problem with iMovie crashing, please come back as I have another possible solution to offer.
John

IWeb page does not fully load

I have tried several times to upload a new iWeb page to my iDisk. I get the two pop-up windows; one telling me that the page is loading and the other that it is "complete". When I first visited the "completed" web page, the photos did not appear and the theme background was missing (all white). The last time I tried to upload the page, the photos appear on the web page, but the slideshow stops in the middle.
I have noticed that the "pie" completion icon next to my iWeb page does not disappear and never fills to gray (there is always some white in the pie).
Any ideas why this is happening? Or what I can do to correct this problem?

Anyone surfed/tested their iweb creations on a PC
with explorer?
My iweb test page with movies does not fully load or
scroll on the wife's PC with explorer. Works great in
Safari on all my macs.
Hi sharkguy - Good point!
Stats to Remember when designing websites:
1. less than 4% of internet surfers use some version of Mac OS
2. less than 7% of all internet surfers use Firefox as a browser of choice
3. less than 3% of all internet surfers use Safari as a browser of choice
4. at least 85% of all internet surfers use some version of Internet Explorer
5. Netscape, Opera, and Mozilla make up the rest of browsers used
Best wishes on your project, Rick
iMac G5 iSight 20" - 30G iPOD - HP Pav 15" WS and Toshiba Sat 17" WS Mac OS X (10.4.6) Canon 20D & A620

SWF not fully loading

I have a flash 8, as 2.0 site that loads swfs into a content
movie clip. Everything works fine except for my photo gallery. The
swf does not fully load on the first click. But if you click the
gallery button a second time, it all loads. Also, once inside the
gallery, I have a gallery_container movie clip that loads the
different photo albums. These also usually do not load completely
on the first click.
My swfs do not have frames after the load and display frame,
so I'm not sure why it isn't completing the action.
I've been trying to solve this problem for weeks. I would
really appreciate some help.
Here is the site where you can see this problem in action:
http://www.soultoneamps.com
click on "enter"
then "gallery"

I solved this problem. So here it is for anyone else who
might experience the same issue:
I had too many complicated elements loading in one frame and
in one layer. Even though I had a stop (); on that frame, all of
the elements could not load on the first click.
I changed my fla file so that one button is added into one
progressive frame and layer at a time. Worked like a charm.
Yay!

Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
== This happened ==
A few times a week
== Couple of weeks ago

Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''general.useragent.'''
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
Then restart Firefox

Certain existing and newly saved photos are not fully loading..

I'm not sure if this is a result of the update, or related to a recent application I may have downloaded that interfaces with the photo library and/or camera (face melter™ or camera bag™)..
it also may be a result of the 2.2 update..
Here are some screencaps showing the issue.
First one, this is a photo that I have hosted that I took with my DLSR, I saved it to my phone via the touch and hold saving process, early on in my phones existance as you can see from the 60 of 600something, and it appears nice and clear(aside from the slight compression from e-mailing myself a screencap)
http://randy.mainevwscene.com/images/screenshot1.jpg
now here is a screencap of me visiting the hosted photo on safari today.. it also appears nice and clear
http://randy.mainevwscene.com/images/screenshot2.jpg
I held my finger on the photo, and have now been prompted to save (still clear)
http://randy.mainevwscene.com/images/screenshot3.jpg
and now here is a screencap of the photo I just saved in my photo library. It is obviously blurry... now all photos will do this for a split second while they load, but its as if its not fully loading the file when I view it.
http://randy.mainevwscene.com/images/screenshot4.jpg
Has anybody else experienced this or is it just me?
Message was edited by: thelumpya2

after messing around for a while, I figured out the chriteria that causes the blurry photos... I have no idea why however..
it is without a doubt related to the photos resolution... any photo that is of the resolution 800x533 or vertically 533x800 is having this blurry effect..
I found a random photo on google image search with a resolution of 800x533 of a lambo.. I saved it to my phone, and here's a screencap of the photo saved to my phone.
http://randy.mainevwscene.com/images/screenshot5.jpg
I then saved that photo to my computer, opened up photoshop and changed the resolution from 800x533 to 798x532 (constraining porportions) and then hosted the photo on my website.. Then I visted the hosted photo's URL on my iphone with safari and saved this image (798x532).. Here is a screencap.. you can see the difference clearly..
http://randy.mainevwscene.com/images/screenshot6.jpg

HT4059 Books are downloading to IPad 2 but not fully loading on iPhone 4S.

Books are downloading to IPad 2 but not fully loading on iPhone 4S. Shows book cover but the download line never filled out and book remains shaded and unable to open, delete, or move. Tried un/reinstall of iBooks, reboot phone, turning on/off, syncing. Suggestions?

I contacted Apple support. He had me unsync all books from my phone through itunes and then resync all books back to phone. It work and all iBooks are now completely loaded.

Microsoft Office 2007 student does not fully load

I have been trying to get my Office 2007 student 60 day trail to load but it come back to me with the message:
Microsoft Office Student 2007 did not fully load.
please can anyone advise me what to do thanks

Hi!
Here it is a Toshiba user to user forum and I think this is a Microsoft problem. So I would contact the Microsoft support.
Maybe there is something wrong with the website or something else.
Bye

Ppt slide not fully loading

Hi, I've uploaded a ppt presentation to captivate and for the most part, all is good. There is one slide that did not fully load, though. It's just a simple bullet point slide - a title and then 4 bullet points, but only 2 load. I've tried re-loading it. I've recreated the slide and saved it as another file and tried importing it that way... Still only 2 bullets points load. Any suggestions?? I'm using captivate 6 and ppt 2010.
Thanks!
Lisa

Hi Lisa
Does that slide operate normally in PPT? Or does it require you to click to make the bullets appear?
When you import from PPT to Captivate, each slide is converted to a SWF and set as the background. If your slide has bullets that appear on click, they will behave in a similar manner once the slide has been converted into Captivate.
Cheers... Rick

EAC is not fully loading

I'm using Exchange 2013 and after we restart the server the ECP page is not fully loading.
I tried restart again and keeps the same. Can someone help me how to fix it?

Hi,
According to your description, I can understand that you can access EAC in exchange 2013 successfully, but there is an issue with incomplete page display. Have you tried it in other browsers?
Please make sure you are using supported browsers for EAC access. If the issue also happens in IE, I suggest we can try to add this website into compatibility list to check whether the issue persists. To do it, we can try:
Press Alt + T, and then click on Compatibility view settings, add this URL into compatibility list. For detailed information about this setting, please refer to:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11-win-7
Thanks,
Winnie Liang
TechNet Community Support

Page not fully loading unless refreshed

I am experiencing a bit of difficulty with one of my websites and I am hoping that some fresh eyes may help. What is happening is, the index page is not fully loading on arrival. It only loads if the page is refreshed. Can someone take a look and see if you can see the problem?
Any help is appreciated

Have a look where?
Can you post a link to your website?
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Other things that need attention:<br>
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r22
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Why when i run magic bullet with adobe premiere CS5 then adobe premiere CS5 does not run ?

Hi there,
I would like to ask you why when i am using magic bullet and then i am going to open the premiere CS5 , then the adobe premiere CS5 does not run ?

First of all , I would like to thank you for the help.
Secondly , I would like to inform you that I used to have the Adobe CS4 but one friend of mine change it into CS5 , but nothing worked properly after it. e
I download the Adobe CS5.5 Master Collection (as trial) from the official site of the Adobe. Then , I download the MB http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/226/ from here but when i am going to use the filters , one X shows on the screen and i cant work... Any help ?

Ipod classic mp3 files not fully loading

Hi,
I have two iPod classics, one 80gb, the other 160gb. Having loaded up my music on the more recent 80 gb, mpeg audio files, 192kbps, some 12,000 odd songs, I have noticed some songs have not fully loaded. They play to a point, end and we move on to the next song. Having checked one particular song, I notice that it is also truncated in my older 160gb pod. I have tried a restore and reload on one pod ut that has not changed anything. The song is complete and plays so in iTunes on my Mac. Any suggestions?

That sounded logical B-rock and I followed your instructions in this fashion:
1. I deleted the track from iTunes and synced my iPod.
2. Subjected it to MP3 Validator and got the little ping of goodness.
3. Added the track to iTunes
4. Re-synced my iPod
Now, I played the track first in iTunes and it played fully, then played it on my iPod and it cut off at exactly the same time as previoiusly. All this is getting frustrating.

Large Premiere CS5 Project not fully loading

Similar Messages

Maybe you are looking for