Large size file could not copy from "Open with explorer" in SharePoint.

Hi,
I have uploaded around "120 mb" file in Document Library. I was trying to copy that file from "Open with explorer" to my local system. I am getting "disk Space error".
Should i specify any size at any where in "Central Admin".
Thanks & Regards
Poomani Sankaran

To resolve this issue, follow these steps:
1. Click Start,
click Run, type regedit,
and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
3. In the right pane, right-click the FileSizeLimitInBytes value,
and then click Modify.
(If
FileSizeLimitInBytes does not exist then right-click the blank space in the right pane, click New, click DWORD
Value, type FileSizeLimitInBytes,
and then click OK)
4. Click on Decimal,
and type 4294967295 and click OK. Note The
default value for the file size limit is 50000000 bytes.
5. Quit Registry Editor. Restart the computer.
CAUSE
This issue occurs because a security change that was introduced in Windows XP SP2 affects the Web Distributed Authoring
and Versioning (WebDAV) redirector. This security change makes sure that an unauthorized server cannot force a client computer into a denial of service attack. If you try to download a file that is larger than 50000000 bytes, the client computer interprets
this download as a denial of service attack. Therefore, the download process stops.
IMPORTANT
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base
How to back up and restore the registry in Windows
http://support.microsoft.com/kb/322756

Similar Messages

Can not open library using "Open with Explorer" in Sharepoint online.

Hi,
I am trying to open a document library in Explorer view to upload multiple files with large size.
But i am getting this error
I install several hotfix, also started web client services but no luck.
Its a office 365 site. My OS is Windows server2008 R2, IE10.
On other machine it open the library in explorer view but at last step when 5 seconds remaining it stops the process.
Please, tell me how could i do this?

Hi,
For this issue, I suggest you take a look at this KB article and install the corresponding update package which matches your OS version:
http://support.microsoft.com/kb/2846960
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

Help! Getting error "The file could not be written" when exporting

When I attempt to export a group of approximately 50 photos from LR4, a window opens at the end of the process saying "The file could not be written" along with a list of approximately 10-15 NEF file names. I have never had a problem exporting before, but I recently started storing my LR catalog and files on an external USB 3.0 drive. I'm looking for any suggestions!
Here are the details:
LR4 with latest updates
Win 7 with latest updates
LR catalog and photo files stored on external USB 3.0 G: drive
Trying to export to a folder on my desktop on C: drive (46GB free out of 134GB, solid state drive)
LR files are NEF, exported files are JPG
I've tried to export to the same group of photos multiple times with different names and different output file sizes (8MB, 5MB, 2MB). Each time the list of failures is different.
Some of the thumbnails which appear in Windows Explorer are corrupted (part of the thumbnail is gray)
When I try to export the same group of photos to the external USB 3.0, it works perfectly!
Here is an example of one of the LR log files:
The file could not be written. (17)
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1915.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1918.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1919.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1939.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1948.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1958.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1961.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1964.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1968.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1971.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1972.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1973.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1978.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1983.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1986.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1989.NEF
    G:\2013\Stratton and Colorado\2013\2013-06-23\_D7K1990.NEF

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22file+could+not+be+written%22

"original file could not be found" problem

Please help.
I have a home network of 4 PCs. One PC is being used somewhat like a server ie. all of our MP3s are on that PC in a shared folder. Somehow (my kids won't admit to it) the Microsoft firewall was modified not to allow file sharing. As a result, iTunes on my wife's PC became disassociated with the files on our "server" PC. I corrected the fire wall problem and my wife's PC can now see the shared folder but everytime she clicks on a song she gets the "original file could not be found" error with the exclamation point.
She has well of a 2,000 songs in her library and does not want to individually find (reattach) each one. Also, she does not want to reimport all of the MP3s into her library because a lot of the MP3s are music that she does not have in her library and does not want there.
My 2 kids' PCs have the same problem and of course their iTunes libraries have a different mix of music from the "server" PC.
Any ideas? TIA

hmm, did you change it yourself without restarting iTunes?
Because, when my external HD is not turned on before I start iTunes, I get all the ! not found which never fails to make me gasp in dismay.
But then I just close iTunes, start the exHD, re-open iTunes and everything is OK.
Tell me, do you happen to be in the practice of backing up the itl and xml files?
What are the iTunes library files?
If you have saved copies of those, you could just put them back in place, snip-snap, problem solved.

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

PSE 5 Error "could not complete the open command because of a program error"

I have been using PSE 5 for years but all of a sudden when I try to open multiple files "could not complete the open command because of a program error" appears. I have reformatted my computer and reinstalled all programs & updates but still get the error. I am trying to access photo files in a specific, user created, directory on my computer; the funny thing is that if I access files in the My Documents\My pictures\ Sample pictures folder I am able to open all the files. Any and all help or suggestions are welcome. Thanks

When you choose liquify command it says "Could not complete the Liquify command because of a disk error." so nothing at all happens other than the error message
There is plenty of room on my scratch disks --lots of it
Tried using a smaller selection using Marquee Tool to outline a smaller area near where I want to Liquify. makes no difference. tried a small file as well. no ability to use liquify.
This is really weird.
keep probing the depths of your mac ideas, as I am going a bit nuts with this, friends

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

Yes. I've found that works best. Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth. Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full. So unfortunately there is a lot of empty space that is needed for smooth operation.

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

ITunes could not copy "Beethoven's Symphony No 9 (from "A Clockwork Orange")" to iPhone "Heywood Floyd's iPhone" because the file could not be read or written

Hello, i am having the following problem...
"iTunes could not copy "Beethoven's Symphony No 9 (from "A Clockwork Orange")" to iPhone "Heywood Floyd's iPhone" because the file could not be read or written" [ ... and yes, Heywood Floyd is an avatar name..]
With this...
a. it occurs when I try to synch my iphone with iTunes.
b. I have tested the "Beethoven's Symphony No 9" files that I have found on my iTunes, and my iPhone, as there is a copy of "Beethoven_ Symphony No. 9, _Choral_" folder that is the concert from Bernard Haitink & London Symphony Orchestra;
c. This is where is get weird, a sort of Jack Torrance moment, they only file related to "A clock work orange" is 06 A Clockwork Orange - Ode to Joy.m4p...
So what is happening, and how can I resolve this, as I am not able to synch between my mac and my iPhone....

Check the media source drive for errors.
See also Repair security permissions for iTunes for Windows. Not sure it is relevant but can't hurt.
If iTunes is confused about what media is and is not on the device take these steps:
Backup the device.
Restore as a new device.
Restore from the earlier backup.
tt2

I can't import photos from a card, file or anything. I get "could not copy a file to the requested location".. This has never happened before.

I can't import photos from a card, file or anything. I get "could not copy a file to the requested location". I have never had this happen before. I use a MacBook Pro

I also have the exact same issue. New IMac, installed LR, imported approximately 900 photos no problem, across the network from a Windows PC. The import stopped when the network connection was lost. Now I cannot import for the same reason "could not copy a file to the requested location". I have plenty of disk space and i have permission to the needed folders. I cannot even import from a folder already on the IMac.

Purchased a song from iTunes, i tried to transfer it to my itouch, but i received an error "iTunes could not copy because the file could not be converted". how do i convert the song (well, i thought it will automatically be converted)?

purchased a song from iTunes, i tried to transfer it to my itouch, but i received an error "iTunes could not copy because the file could not be converted". how do i convert the song (well, i thought it will automatically be converted)?

Problem Fixed:
Remove the song from your itunes library, then go to the itunes store and try to download it again. It will say something like "this song has already been purchased, would you like to download it again for free?". Click yes, and it will download again. This worked for me, hope it helped

Syncing downloaded movies from itunes to ipad which then suddenly stops and will not finish the sync stating itunes could not copy "name of movie" to the ipad because the file could not be written. restored the ipad to factory settings, reinstalled itune

I have had to format my PC running windows 7, and reset my ipad 1 to factory settings, i then installed latest itunes on the PC authorised the PC and re downloaded several movies via itunes previous purchases, all was well until i tried to sync the ipad to the PC, only some of the movies synced onto the ipad, otheres stalled the sync stating itunes could not copy "name of movie" to the ipad because the file could not be written. I have to pull the plug on the ipad just to get itunes to unfreeze, but it still will not sync these movies. and one help

Hi
I was having the same issue with music and movies but it had been ok before. The sync would freeze on a random file and then i had to take out the USB cable to clear it. After trying all sorts of things i saw someone mentioning about Anti virus and firewalls. I am using McAfee so i disabled it as a test. After this i could sync music and movies without issue!!!!! So in my case the firewall/anti virus was causing a problem. McAfee updates itself a lot so I am guessing something has happened in a recent update that impacted iTunes.I am not sure if this kind of thing is also causing your problem but it sounds very familiar.
Hope this helps.

How to BackUp Restore Large Library "original file could not be found"

I've searched the archives for this with no clear answer, and am reposting to avoid confusing anyone.
I am working on a manual and seamless BACKUP-RESTORE process to manage my large 100-gigabyte-plus iTunes library.
+++++
First, my iTunes folder is in default location:
Boot drive> User> Music
I don't keep any music in this folder.
New music is imported into this folder, copied over to my Music Library, and then deleted from iTunes folder (to keep it and my boot drive clean, and my 100GB Music Library folder meticulously organized).
My iTunes folder is set at default:
iTunes> Preferences> Advanced> Change> iTunes Music folder location
My actual 100-gigabyte-plus music folder is stored on a 2nd hard drive:
HardDrive> Music Library
This setup works perfect.
+++++
BACKUP
To backup, I simply:
1) copy my User> Music> iTunes folder (800mb) to a 3rd hard drive.
2) copy my HardDrive> Music Library to 3rd hard drive
RESTORE
To restore, I simply:
1) copy my backup iTunes into User> Music.
2) copy my Music Library back to 2nd hard drive HardDrive.
3) Relaunch iTunes and every works perfect.
THE PROBLEM
However, if I change the name of my 2nd hard drive (where my 100GB music folder is stored) — iTunes shows everything in place — all songs, art, playlists — but I get following error on every song:
THE SONG NAMED ______ COULD NOT BE USED BECAUSE THE ORIGINAL FILE COULD NOT BE FOUND. WOULD YOU LIKE TO LOCATE IT?
Obviously I don't want to have to do this individually for 30,000 songs and am looking for instructions how to point iTunes database back to my 2nd hard drive> Music Library and complete the restore process.
I am hoping this can be done without changing my work flow — and it is a simple and logical move to tell iTunes where all the original files (missing songs) are stored.
+++++
Previous discussions have noted:
Following this Apple Support Doc
http://support.apple.com/kb/HT1589
I was able to Quit iTunes, relaunch iTunes holding Option key, and chose my existing library (from my Music folder) — it works, everything shows up — but iTunes still doesn't know where my songs are (on my 2nd hard drive).
If I point the Option+Open iTunes library prompt to my 100GB Music Library (on the 2nd hard drive), it tells me (logically) there is no library there).
I've also launched and manually verifies iTunes> Preferences> Advanced> Change> iTunes Music folder location — it works, everything shows up — but iTunes still doesn't know where my songs are (on my 2nd hard drive).
I anticipate more complications if I reset iTunes preferences to my 2nd hard drive or start dinking around trying to see what works and what does not work.
+++++
At this point I am trying to make THIS workflow, backup-restore process work — so I am hoping someone else has slugged through this and can take a few minutes to clue me in the right direction (or at least tell me there is no way to do what I am trying).

If I simply rename the second hard drive to the name of the original 2nd hard drive — iTunes is successfully restored.
I am still looking for a better way because I want to change the name of the second HD...

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"

Moved iTunes library to an ext hard drive to make space on my int drive... Followed steps from apple. Now I cannot access my music... It says: "File could not be used because the original file cannot be found. Would you like to locate it?"
I moved my iTunes library to my external hard drive some time ago and I followed the directions listed here on the apple support page. It did copy my library and now is on my hard drive... I can open iTunes and use it to sync all of my devices but I would like to play my music... I can see all of my music files but can not play them if I click on an album or song it says the following: "(file name) could not be used because the original file cannot be found. Would you like to locate it?" I click locate but do not know where to go from there? I need a way to access all files and not to hunt down one at a time on my hard drive... I am pretty sure I deleted the original library to make space on my internal drive which was the reason for moving it. I have tried and tried to fix it and do not have a lot of time to do so with a one and two year old at my house who do not like it whenI sit down at my computer. What to do??? Any help is much appreciated!!!

See Make a split library portable. Move all of the bits of the library together in the the correct shape and it should work. Or undo exactly what you did and then start over.
If you're a former Windows user don't try merging two folders together that have the same name by dropping one into the same folders as the other, as that goes badly on a Mac.
tt2

ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want it?

iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: Woildbill

I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps!

Large size file could not copy from "Open with explorer" in SharePoint.

Similar Messages

Maybe you are looking for